Put the ladies on straight water for this week. Hairs are changing, and most of the trichs are clouded. Have some fox tailing on some of the buds, being so close to the light. Was kind of expecting it, but really, I don't mind a little fox tailing. The top of this AK is thick, hard and full of trichomes. When the runoff water shows under 200 ppm is when these ladies will be coming down. They will be watered, until just a few drops come out the bottom, as to not flush the final ferts out to quickly. Plants have stayed good and healthy, without losing any leaves throughout the grow. Limbs are bending down from the weight of the flowers. Didn't support anything this time, so quite surprised that the branches were able to support these nugs, as long as they did.

Update day 65: Exactly one week after switching to 12/12 and they have stretched by about 20cm. The stretch will probably continue for another week and then the real flowering will begin. Both are also developing identically in the stretch. The plants are slowly consuming more and more water and the metabolism will change. By the way, the fan was in the same place. You can therefore use it as a good reference. At the end of the stretch, I plan to remove the side branches that I didn't remove in the last few weeks of the veg. This will leave only the actual main branches from the mainlining. Update day 67: Nothing to say Update day 69: It's day 11 since 12/12h and the stretch has almost completely stopped. The #2 also shows the first pistils. That's why I decided to trim the plant today, as you can see in the pictures. I removed the side branches except for those at the top of a branch or if they have developed extremely well. I also removed a few leaves. I hope that this will allow the lower branches to catch up a little. Interestingly, #2 has developed even better with stronger shoots than #1. I'm not a fan of major defoliation so just a little. Maybe I'll remove more in the future.

11/30: I harvested the first 6 today, flushed 5 more for the second time, and fed everybody else for the last time. I washed all the branches using the 4-step method ascribed by Doc Bud at High Times/420magazine and many other notable cannabis connoisseurs, with slight modifications: 4 x big plastic totes/bins 8 x ounces of 12% hydrogen peroxide (or 32 ounces of 3%) 2 x cups of concentrated lemon juice 2 x cups of baking soda 10 x gallons of water in each bin Unless your tap water stinks, you're safe to use tap water for the procedure, but I used an inline carbon hose filter to fill my buckets. Bin #1 - 10 gallons of water mixed with the hydrogen peroxide Bin #2 - 10 gallons of water mixed with the lemon juice and baking soda Bin #3 - 10 gallons of water as hot tap water Bin #4 - 10 gallons of cold tap water I was mainly concerned about removing as much lint and cat/dog hair as possible, but also rinsing off any residue left from all the various foliar applications of humic/fulvic acid, kelp, axiom, big bloom, and tiger bloom I did. First, I put my leaf blower on low speed and blasted my plants thoroughly, one at a time, replicating 50-60mph winds for about 10 seconds and watched as a whirlwind of debris and hair flew out the back door. Bud-washing: Pluck any necrotic plant material and any old fan leaves off while they're still on the plant. Then, take a handful of branches and submerge them in Bin #1 for about 30 seconds, agitating it, removing from water, submerging again, agitating, etc...then remove it and let it drip out for a few seconds...then repeat the process with Bins #2-4. Let it drip dry overnight with a little bit of airflow, then dry as you normally would...baskets, boxes, etc.. I hadn't watered these plants in a few days, so they were almost in draught, but after doing this procedure, they were fully hydrated(turgid) and seemed to have brighter colors than before. Nice!😍 12/1: The bottom part of the closet seems empty with only 9 plants in there.. 😟 I cut the harvested plants up and put them into drying baskets in the top of my closet with a small oscillating fan on. I've got the temperature fluctuating between 68f and 75f and the RH is staying between 48% and 52%. To do that, I had to take down the small light in the top of the closet to fit the drying baskets up there. So, I moved the 3 shorter plants still up there down to the bottom and put them on top of buckets. Now the bottom of the closet looks full again!😃 I'm anxious to finish up this grow so I can get busy growing the Fastbuds Fast Flowering Photo Testers!!! When I harvest the next 5, I'll flush the remaining plants really well and that will be all the flushing they'll get..I'll let them dry back out for a few days and harvest them. I've got to make some minor improvements to the garden (adding UV, blue and red/far red booster panels and intake fans) That should put me on track to start germinating them by mid-December if all goes well. 12/3: ...early a.m... The harvested plants are already dry!?!?? And have excellent texture??? Wow..bud washing is for real..roughly 48 hours after I hung them to drip dry, and 40 hours after I put them in baskets in 50% RH/70f conditions with moderate airflow...usually takes 4 or 5 days to get a good slow-dry in the same conditions, so I'm convinced that this must be attributed to the bud-washing procedure. I'm sold! Here's the talley so far: plant #1 - 115g (plus 13g larf) - Candy Cane [F2] plant #2 - 108g (plus 18g larf) - Candy Cane [F2] plant #3 - 119g (plus 15g larf) - C4ndycaine [Candy Cane x C4] plant #4 -  92g (plus 6g larf) - Candy Cane [F2] - the smallest plant in the main area plant #5 - 112g (plus 22g larf) - Candesia [Candy Cane x Amnesia] plant #6 -  75g (no larf) - Candesia [Candy Cane x Amnesia] - grown in upper area under 200w ...afternoon: I flushed 6 of the last 7 plants for the first time today and harvested 4 more of them. I washed them and hung them to dry.....my dripping wet bathing beauties!😍

Spider Mite infestation. I put the story in the pictures. Long story short, the infestation focused on the lower (ticker) branches of AK2 and this explains the undergrowth compared to her sisters. The trichomes are half-cloudy / milky and she will be ready for harvest within a maximum of 2 weeks. I defoliated her by removing nearly all leaves and put her aside in the grow room. Open to any other suggestions. I also confess that I neglected the plants and did not check the source of the white point. I also used some of the soils I used in other outdoor plants which I believe the source of the infestation. Seed Formations AK2, again produces seeds in lower branches. I did not pollinate this one and there is no other source that she is pollinated. I didn't see any Bananas, too. I am thinking it might be because of the stress from the Spider Mites. Open to any suggestions on that too. Other Two Girls I spotted some mites on them too, but it was not alarming. I defoliated the infested few leaves and they will be okay. Jack Herer needs two and White47 might need another 3 weeks and that is it. I think they all will be okay until then. I will keep a close eye on them. Sorry for not good news this week.

I will be careful every time I encounter an insect problem and use an insecticide, I will eventually get rid of it with a water care method

Gracias al equipo de Terpyz, XpertNutrients, Marshydro y Pro-Mix, sin ellos esto no seria posible. *💐🍁Kosher Kush X MDC TEST: Test de una nueva cepa proveniente de dos grandes genéticas, Kosher Kush x Mandarine Cookies, una de ellas está en sustrato Pro-Mix Hp Mycorrhizae. 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 5: Uno de los ejemplares esta en sustrato Pro-Mix y la diferencia en cuanto a mejoria es bestial, se notan unas plantas muy homogéneas. Gran semana , he eliminado las ramas bajas y a algunos ejemplares se les ha practicado poda apical. Voy a dejarlas unos dias mas en crecimiento antes de pasarlas a floración para asi ocupar mas espacio en la carpa. Continuo con las dosis de nutrientes recomendadas por el fabricante. Se vuelve a aplicar tierra de diatomeas para evitar plagas indeseadas. Potencia del foco: 42% Extra UV: 5min x dia

Mixed week it's growing a bit and I am giving it food now . I was told call mag is a must so I've grabbed some of that . Yesterday I took it out to water and it fell over, it got bent and I could see roots pulled up ,I pushed back the soil and straighten the trunk been reading up on it hopefully it'll be ok I kinda think it looks uneven now ? Fingers crossed . .

hey guys! I decided to baptized my two ladys and add some visual markers to see wich is witch easily! Batman = CBDurban / black bucket Robin = Afghan / white bucket After watching a tones of videos i finally decided to apply some prunning techniques. Batman received a topping to have for cola's, and Robin was FIM and i remove 2 big leaves that was doing lots of shadow! You can see the hole process by picture and videos! Thanks for following! And please subscribe!

Welcome to Veg Week 3 of Fast Buds Papaya Sherbet I'm excited to share my grow journey with you from my FastBuds Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Photo strain Papaya Sherbet : Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Fast buds • 💧 Humidity Range: 60 • ⏳ Flowering Time: 58 Days • Strain Info: 30%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 0.5l • Nutrient Brand: Narcos • ⚡ Lights : 600W x 2 A huge thank you to Fast Buds for allowing me to try my Best with this amazing collection from Automatic and Photo Strains they managed to Sponsore . Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!

Super Soil Guide Peyote Wifi from Seedsman seeds wow can't believe it's been 15 weeks since I started this plant . Ive been busy brewing up the High tea and I fed about 15 litres of the diluted (5:1 water/tea ratio) Tea to her over a two day period and she lapped it up and has regained her vigor again. I know ive mentioned it previously in this diary but I can't stress how Important the condition of your soil is in ,is to your plants overall health. Ive seen lots of grows (mine included) where the Grower only takes notice of the plant itself and ignores the soil until issues appear via the leaves on the plant ie nutrient deficiencies , Root problems ,disease etc . By being Proactive with your soil as well as your plant you can potentially eliminate or alleviate any problems before they can effect the plant. Things like the use of Mycorrhizae will attack any bad pathogens within the soil and root system. Using seaweed/kelp on a regular basis helps the plant during times of stress or High temps as well as being a NATURAL PGR . Mollasses can be used to provide Carbs to your plants roots and the girls love it!! So in a nutshell ,, if you look after your soil it will look after your plants 😃 Thanks for stopping by and reading my diary update 👍

420Fastbuds Cinderella Auto/Week 3 What up grow fam weekly update for these two. They both are progressing nicely the systems the one was showing seem to be fixed as where getting some regular growth now. I'll start to introduce nutes this week using General Hydroponics 3 part flora series. All in all Happy Growing

This amnesia Fast by seedsman smell ultra stinky, I love so much this clasic amnesia smell like sweet and the same time spicy it's awesome to have this girl in my garden, the next weeks are going to be fantastic

Growing well into week 6ish of flower, had quite a bit of burn come through but the buds are stacking up well! Stickier and louder every day.

Good week no nutrients still but had to cut a branch down to lowest nodes on shogun, it responded well and I don’t think I will lose much on her just a little weird shape, next week will be using home made compost and marine cuisine to boost veg while I can, they small greattt!

Sie wächst immer noch in den unteren Seitentrieben weiter, obwohl sie schon gut blüht. Leider hat der Grauschimmel sie nicht verschont und ich musste ein kleines Stück eines Buds entfernen. Der Ventilator im Folientunnel weht auch sie nun direkt an um die Luftfeuchtigkeit in den Blüten zu senken und die Wasserversorgung wurde heruntergefahren. Hoffentlich schafft sie es bis zur Ernte in ca. 3-4 Wochen. Auto Cinderella Jacks benötigen etwas länger, dafür wachsen sie auch stärker. Sie ist die größte meiner diesjährigen Autoflower Pflanzen. Leider habe ich auch an ihr etwas Bud rot gefunden und sofort entfernt. Ich vesuche den Autoflowers den bestmöglichen Platz unter dem Ventilator zu geben. Der durch Schneckengewicht abgeknickte Zweig hängt zwar, aber er wächst bereits sich biegend nach oben. Bis nächste Woche! --- It is still growing in the lower side shoots, even though it is already flowering well. Unfortunately, gray mold has not spared it, and I had to remove a small piece of a bud. The fan in the foil tunnel is now blowing directly on it to reduce the humidity in the flowers, and the water supply has been reduced. Hopefully, it will make it to harvest in about 3-4 weeks. Auto Cinderella Jacks take a little longer, but they also grow stronger. It is the largest of my autoflower plants this year. Unfortunately, I also found some bud rot on it and removed it immediately. I try to give the autoflowers the best possible place under the fan. The branch, which was bent by the weight of snails, is hanging, but it is already growing upwards. See you next week!

2/1: Woke up to some white splotches on Amnesia 3, which I thought were drops of humidity-water which contains a lot of white junk (ultrasonic humidifiers), but after slowing down and watching the overnight timelapse footage, I think it may be powdery mold. I was able to wipe it off with a soft, damp toothbrush earlier, but now I'm probably going to need to snag some neem oil. There are also some lightening of spots on Trainwreck, however no white splotches yet. I'm really hoping this isn't caused by powdery mold on one plant causing leaf septoria in another. Either way, neem oil should clear this up while still early in the grow stages. Lights are at 60% and are about 15-16 inches above the tops of the plants. I've purchased some General Organics Calmag solution and some neem oil spray. I applied the neem oil to any white spots on Amnesia 3 with a Q-tip. I coated one of the two discolored leaves on Trainwreck with neem oil lightly spread with a Q-tip, as to not allow bubbles to form and cause a magnifying glass effect from the lights onto the leaves. I mixed up a gallon of water with a tsp of calmag, and then heavily pH-upped it to about 6. I carefully watered about a cup of water around Trainwrecks stem. If the neem oil works, one leaf will be fixed; if the calmag works, both leaves should be fixed...at least that's the goal. 2/2: So the concensus of others on the lower leaves of Trainwreck are light burn from water on the leaves, though I'm not too sure. The outside edge of one leaf is starting to brown, which makes me wonder if it laying on the soil could be causing a nutrient burn. I've decided to throw a few toothpicks under those two leaves to help keep them off the soil, in hopes that the browning won't continue to grow. The neem oil that I dabbed onto Amnesia 3 has lightened a few spots, but overall she looks good. 2/3: Looking good. Raised the light on Trainwreck by an inch or so, to hopefully get a little stretch. 2/4: So far so good, growing fast! I used a little bit of calmag water on trainwreck to see if I could resolve the yellowing, otherwise they have not been watered yet since transplant. Probably will water here soon within the next couple of days.

Harvested.

Here we are at the end of my plant's wonderful eleventh week of flowering, another week full of exciting developments and new discoveries. The constant and unstoppable growth of the plant has come to an end, showing a beauty and vitality that are a true spectacle for the eyes. 😎 The abundant layer of resin that has formed is a clear sign of the health and well-being of the plant, once again confirming the benefits of the premium nutrients used throughout the entire growth cycle. TrollMaster's "TENT-X" environmental control system continues to prove its worth, precisely maintaining optimal temperature and humidity levels to promote vigorous plant growth. The combination of advanced and precision technologies ensures that plants can thrive in a controlled and conducive environment😎 I am thrilled to share with you the latest video showing the temperature, humidity and VPD trends of this last week of flowering, providing further demonstration of the extraordinary performance of the TrollMaster control system and its synergy with the other elements of the grow room.With each week that passes, the anticipation for the new discoveries and challenges that await us continues to grow. With the constant support of Plagron nutrients, trust in the TrollMaster control system and the excellence of MEDIC GROW LED lighting, I am sure that I am always ready to face any challenge! Thank you again for being by my side in this extraordinary adventure, dedicated to exploring the wonders of plant cultivation. Together we continue to look to the future with confidence and enthusiastically anticipate the successes that each new week holds for us. 💪👽🌱✨ REVIEW TENT-X: I was pleasantly surprised by the effectiveness and functionality of the TROL MASTER! This device is simply amazing, as it has allowed me to monitor the environments I use it in accurately and efficiently. One of the most impressive features of this device is its ability to operate LED lights easily and intuitively. Thanks to its user-friendly interface, I could easily customize the lighting of my rooms according to my tastes and different situations. I particularly appreciated the possibility of programming the sunrise/sunset simulation, thus creating a more natural situation.But that's not all: the device goes further and manages to keep me constantly informed about the humidity and temperature of the surrounding environment. This feature has proven to be very useful, especially in times when I am not present. I was able to set humidity limits, so that the device would immediately alert me if the levels exceeded the desired threshold. This allowed me to intervene promptly and avoid excessive oscillations. The accuracy of the temperature measurements was another welcome surprise. The device is equipped with a high precision sensor that allows me to constantly monitor the temperature of the rooms. Here too I was able to set temperature limits, allowing me to be notified immediately if they were exceeded. Overall, I was really satisfied. The TENT-X exceeded all my expectations. Its ease of use, precision of measurements and possibility of customization make it an indispensable tool for those seeking to monitor and optimize environmental conditions.