Likes
Comments
Share
@Trinidad
Follow
156 days (22.2 weeks) from germination to cure. Baddazz og cheese is very resienous and sticky. She give high yeild of wax when pressed. This is my 1st cheese weed so smell is new to me, very pleasant, almost like the Fahrenheit perfume from Dior. I did smoke maybe a branch and a half while drying. As for the big budda cheese, she is almost finished with about a week or 2 again. Her buds are very big and she has lots of thricomes. The blue cheese is struggling as this one was transfered from soil to hydro.
Likes
11
Share
@TechDCo
Follow
Happy Xmas 😊 No better day to lay them down! "We're Off to the races" 🏁 Greyhound's at the ready! "I feel like; we're in for a speed run Martina" •HydroSol Grow + H202• #Peanut Butter OGKB - Sensible Seeds #Peyote Wi-Fi CBD - Seedsman. #Monkey SlapZ - PreyBird Farms. #The Future - DC Seeds "Sprayed SEEDS with weak 3% solution of hydrogen peroxide foodgrade. Placed on mineral wool inside of a glass food container in a propagandist! 😉 on a heat mat at 24c. 26/12/2024 Peanut Butter OGKB has sprouted her tap! 27/12/2024 Peyote Wi-Fi CBD (PW) is ready for the light as well with The Future (TF) 28/11/2024 All have germinated! Peeled back the shell 🐚 on peanut butter OGKB (PB) being a good Santa's little helper. Will introduce HydroSol water soluble feed in the morning. They should have enough in there tap root until morning. "Its only been 3days since I laid them down 👀 and it's been 1 day from seed sprouting tap root" mathematical genius i am. Midday: Apllied a very weak feed of HydroSol at ratio of 1ml/L. DLI: 20 (c) Little above average! Lights Off! Sprayed propagator with HP 6% all round avoiding direct touch! About week 3 will up the dose spray to 12% "avoiding direct touch" this is bleach strength. But hopefully being introduced early will stop the micro-organisms "ever" building up in the plants cells ever. May have to do a laboratory grow next to get the results i want that are projected in my minds eye! If the hydrogen keeps reacting with micro organisms; it could by the very definition rip atoms and form mutations of its own kind! Hence these are "Experiments" Because i think every grow is an experiment (leave it to the professionals: I hear you! Would; could; should but the world is full of lies and deceptions; from knowledge; technology; history and Morden-day! Well Morden day academics 'to me. Personally is all bs! Take it as it is, just my opinions and a cloud of thought sprawling and spiraling out over these digital diaries. I hwar ya too. A huge still box would be needed or properly designing a room for a labradory grow. I don't know! I would need zero interferences from "out of space" where the nasties come from in our world. The space between me and you; consists of everything we know in that "gap" for we are forever shinning from our own island! Hard to explain. Lights Off: 147watts wall draw with DLI at 20! Light Shedule: 3-9pm Monkey SlapZ (MS) hasnt cracked her shell yet. I may have to do it tomorrow morning (may die otherwise) 29/11/2024 Lights On! (MS removed shell and accidently snapped its tap toot) PW tap as got snap accidentally as well as I re perisione it. This happened before and MS recovered from the snapped tap root. I made the MS joke 😃 Anyways...let it be! 30/12/2024 I'll update agai😗n next week: i think this talk for the first few days has set the pace for myself! Enter.the.Void.2009.DC.1080p.BluRay.DDP5.1.x265.10bit-GalaxyRG265 Just finshed watching it! for real i thought it was me! mint film to watch stoned 31/11/2024 Increased light: 293watts DLi 35 ***Happy New Years 2025*** How did you smoke yaself in? Me; diy chemistry kit lol "All the best brothers" ❤️ 💪 Keep it strong! I can only hope this diary can bring HydroSol some limes 🍋 🙏 in the sunshine 🌞 water soluble feed. Zero residues "allegedly". All I have heard is positive things about HydroSol water soluble feed. I had a thot, " The HP 12% i am using for cosmetic reasons is basically "water" with an extra molecule. H202 is basically water and is can be soluble with HydroSol feed. I'll explain more on from my pervious grow diary by Segwaying in and out of this diary with quotations from It and continuing on. 02/01/2025 Dimmed light: 188 25DLi Will update next week, these puppies need to stretch their roots. Nothing much happening! Loads happening really. You know what i mean lol " My little rusties i call them" Free radicals have caused the leafs to have a faint ginger tint when it stole the Oxygen Atom, which released free radicals. Not to worry this will boost growth in the next two week. 04/01/2025 All seems okay. Monkey SlapZ lost a leaf 🍃 😳 but looks like shes recovering fine. I introduced HydroSol way too early. Never mind you live and learn. They are all back in the propagator and I put some fresh seeds down to germinate/same strains. 11/01/2024 All fresh new seeds have sprouted. MS is showing new baby leafs 🍃 recovering from losing a leaf and top. Fresh baby growth is now showing! 13/01/2024 MS n TF has sprouted! Old MS recovered God burnt down Mel Gibsons house for making passion of the christ lol 18/01/2025 Its felt like a long start; experimenting with H202. The 2nd load of seeds i introduced h202 2days after tap root sprouted and HydroSol on day 3. This seems to of worked 20/01/2024 21/01/2024 TF and MS repotted into 5L jerry starter cans with 1.25ml/l 22/01/2024 All looks okay, will slowly 🐌 increase lights over the next week as they creep out of germination. PW hasn't germinated yet, ive placed another PW seed down! Midday Check ✔️ DLI: 28 Watts: 270 Canopy distance est: 35-40inches MS is 3days old after sprouting! Maybe it's just me but she looks older and her colours and texture looks different! Could it be the #HydroSol #H202? Who knows? Will have to replicate the protocols to verify these results on indeed because of HydroSol + H202 (1.5ml/l) 23/07/2025 I put down to germinate Freaky Pablo TerpYz and Magic MarkerxZZTOP 26/07/2025 Lights Rapid Growth has slowed 🐌 down. #The HydroSol feed 6.5ml/5litre of water for germinating....1ml of 12% HP. I think this is the ratio I am after. Being water soluble feed it looks like just water ; well it is 98% water i suppose. 26/07/2025 Midday It seems the HydroSol is working perfectly. It's been a rough sturdy journey to start off with but I've found a steady road to the right ratios. 1ml 12%HP to 5L 6.5ml HydroSol Feed for germinating. Vegging I will slowly increase to double the amount as she 👀 sees fit. It seems the HydroSol is working perfectly. It's been a rough sturdy journey to start off with but I've found a steady road to the right ratios. 1ml 12%HP to 5L 6.5ml HydroSol Feed for germinating. Vegging I will slowly increase to double the amount as she 👀 sees fit. Vegging begins tomorrow. It's been 2wks since TF & MS sprouted from seed. Others are still germinating in the propagator. 2 in this tent. 1 in loft tent 1 in Sativa tent (loft) thats the plan. Midday: light increased to 310watts DLi (c): 32
Likes
5
Share
Que pasa familia, vamos con la quinta semana de vida de estas Papaya Zoap F1 de Sweetseeds. Vamos al lío, me quede con 3 por espacio, siempre pongo alguna semilla de más por si no abriese alguna por no perder ese hueco del indoor. También se trasplantaron a su maceta definitiva, en este caso de 7 litros. Y también superaron el shock por el trasplante se recuperaron 100%. El ph se controla en 6.2 , la temperatura la tenemos entre 20/22 grados y la humedad ronda el 50%. El fotoperiodo ya fue cambiado a 12/12. Hasta aquí todo, Buenos humos 💨💨💨
Likes
9
Share
@SeseGrows
Follow
Home Interior 90x90// Do Si Dos 33 - Barneys Farm + Sour Diesel + Roadawg //Semana 8 // FLORACIÓN - Grotek Nutrients. - Lumatek LEC 315w+ 💎 .
Likes
72
Share
@squalino
Follow
Journal de Culture : Frost 1 - Babouch (Semaine 8) ​Génétique : Frostbanger (F2 Perso) | Système : Autopot 20L ​📣 Remerciements ​Un immense merci à toutes les personnes qui suivent ce journal depuis le début ! Un grand merci en particulier à@MIA_BIOTABSet à Mrs_Larimar pour leurs précieux conseils toujours aussi utiles. Merci à tous pour votre soutien ! 🛠️ Configuration Technique ​Éclairage : Lumatek ATS 300W Pro (réglé à 75%) ​Distance lampe/canopée : 50 cm ​Climat : Jour : 25°C / Nuit : 21°C ​Humidité (HR) : 50% (gérée par le déshumidificateur) ​Tente : 1m80 de hauteur ​📅 Évolution & Floraison : Des buds en "cornes", odeur puissante et retour de vacances ​L'anecdote du retour de vacances (Alerte pH !) : En rentrant de mes 4 jours à Rimini, j'ai analysé ma soupe et j'ai eu une surprise : le pH de mon réservoir Autopot était monté à 8 ! La cause : Le bulleur installé dans le réservoir. J'ai appris à mes dépens que l'action du bulleur fait grimper le pH de l'eau à une vitesse folle. La plante a donc tournée avec un pH inadapté pendant presque 1 mois sans que je ne m'en rende compte.. (on apprend de ses erreurs 🤣) ​Correction : J'ai immédiatement retiré le bulleur. Pour stabilisateur ma cuve sur le long terme, je change de stratégie et passe sur le pH Down de Plagron (spécial hydro), réputé bien plus stable en réservoir passif. État de la plante & Morphologie : Malgré cette histoire de pH, Babouch montre une résistance incroyable. Les Biotabs font un travail de tamponnage exceptionnel en sous-sol. ​Hauteur actuelle : 84 cm (+ 1 cm, le stretch est définitivement bloqué). Développement des bourgeons : Les têtes grossissent vraiment à vue d'œil et sont déjà particulièrement fermes au toucher. Un phénomène marquant et très sympa : Babouch développe des "mini-têtes" sur les têtes principales, ce qui leur donne une forme originale en forme de cornes ! Couleurs & Odeurs : Les fleurs commencent à arborer une magnifique nuance rosée. Quant à l'odeur, elle est déjà extrêmement forte, je suis vraiment étonné par sa puissance à ce stade. Feuillage : Toutes les feuilles montrent encore un vert bien profond et vigoureux, il n'y a absolument aucune trace de sénescence pour le moment. J'ai simplement quelques petites brûlures localisées sur certaines feuilles, mais rien de grave : c'est simplement dû à de la transpiration accumulée lorsque je manipulais la plante. Nutrition (La demoiselle a faim) : J'ai l'impression qu'elle est particulièrement gourmande en ce moment. Aujourd'hui, je lui ai préparé un bon repas manuel : ​Apport de 5 ml de PK 5-8 Biotabs dans 1 litre d'eau (pH 6,3). Elle devrait adorer ce boost pour accompagner le gonflement de ses "cornes". Le reste du temps, l'Autopot tourne à l'eau claire (et maintenant au bon pH !). ​Résumé : Une semaine riche en enseignements. La structure de Babouch est hyper solide, ses têtes sont denses, résineuses et commencent à prendre des teintes magnifiques. Maintenant que le problème de pH est corrigé et que le PK 5-8 est assimilé, la suite de la floraison s'annonce massive. 08/06 apport nutriments dernier apport de nutriments 5 ml pk 5-8 biotabs dans 1 litres d'eau stop autopots . passe en mode manuel pour le rinçage 14 jours j pense que la fin est proche ​À bientôt pour la suite !❤️
Likes
7
Share
@Treesus01
Follow
Just started flush, will be cut and hung in 2 weeks its snowing here in the mountains of Colorado so I am filling the top of the pot with snow since this does increase trichome production and I did half way cut it down about 1/4 deep both sides of the stalk
Likes
4
Share
Had to tie branches up to take weight, gonna be a beast 😬🔥👊🏻 Fully flushed and ready for the chop!
Likes
6
Share
@Cannabot
Follow
They growing fast now ,they look very similar to each other.Lst has been on point.Tryna work my lst as best as possible making the most of the 10l buckets
Likes
Comments
Share
This week the new growth of the plants transitioned from looking relatively healthy to droopy and yellowed. I wasn't sure what the issue was at first and thought it might be light stress. After more research, I determined that I had what looked very much like a zinc deficiency, which is almost always a symptom of over-watering, which is the most common mistake for new growers, i.e. "Me". I had assumed that adding a good amount of perlite to my soil and using smart pots would prevent me from running in to any drainage issues but I guess not. I was up to 1.5 liters per plant when I realized that it was too much. I also realized I was misreading my syringe which I use to mix nutrients, and that i had been giving only 1/10 of the liquid nutrients that I thought. I'm super embarrassed about the mistake but I'm going for full transparency here, so there it is. Course correction takes places after day 31.
Processing
Likes
43
Share
@Eyeduno
Follow
Tried taking a photo with the lights on all you can see is a blur so ain’t no point in putting one up lol just lights off
Likes
18
Share
Hey fellow green thumbs! 🌿💚 The day has finally come—our Auto Northern Dragon Fuel from Super Sativa Seed Club has been harvested! After an exciting journey, we’re thrilled to share the details of this incredible plant’s final stage. Let’s dive into the harvest report! 🌟 Harvest Details: Day 75: Harvest Day • Harvest Date: Day 75 • Harvest Method: Our beautiful Auto Northern Dragon Fuel was harvested yesterday. After weeks of careful nurturing, the time was right to bring in this amazing plant. 🌿🌼 • Preparation: Before hanging, we meticulously cleaned the plant, removing all leaves without trichomes to ensure a smooth drying process and to enhance the quality of the final product. 🌿✂️ Current Drying Process: • Method: The entire plant is now hanging upside down to dry. This method helps maintain moisture levels within the buds, allowing for a slower and more even drying process. 🌿🔄 • Environment: • Temperature: 18-22°C (65-72°F) • Humidity: 50-60% Maintaining these conditions is crucial for achieving a perfect dry and preserving the plant’s aromatic and flavorful profile. 🌡️💧 🌟 Plant and Bud Characteristics: Auto Northern Dragon Fuel: • Bud Structure: Dense and sticky, with an impressive trichome coverage. The buds are beautifully formed, showcasing the robust genetics of this strain. • Aroma: Even in the drying phase, the rich and potent aroma is unmistakable. Expect a delightful scent that hints at the powerful experience to come. • Trichomes: A thick layer of trichomes covers the buds, promising a potent final product with a great flavor profile. 🌿✨ 🌟 Care Tips: • Drying Process: Patience is key. Allowing the plant to dry slowly will enhance the final quality, preserving both flavor and potency. Ensure good airflow around the hanging plant to prevent mold and mildew. 🌬️💧 • Trimming: Once the drying process is complete (typically 10-14 days), it will be time to trim the buds. This is where we’ll shape the final product and get it ready for curing. ✂️🌿 • Curing: After trimming, curing the buds in jars for at least 2-4 weeks will further enhance the flavor and smoothness. This final step is essential for achieving the best possible smoking experience. 🍁 🌟 Genetics Spotlight: Auto Northern Dragon Fuel: • Characteristics: Known for its robust structure and dense buds, this strain has shown remarkable resilience and impressive bud development throughout the grow. The final product promises to be potent and flavorful, thanks to the thick trichome coverage and rich aroma. • Harvest Expectations: High-quality buds with a strong aroma and potent effects. The slow drying process will ensure the best possible preservation of cannabinoids and terpenes. 🌍🌿 Fun Fact: Did you know? 🌿✨ Drying the entire plant slowly helps retain more terpenes, which are responsible for the plant’s aroma and flavor. This method also helps preserve the potency and quality of the buds, resulting in a smoother and more enjoyable experience. For all the in-depth action and detailed explanations, head over to my YouTube channel! 🎥✨ I’m sharing all the tips, tricks, and step-by-step guides to help you get the best results from your grow. This week’s harvest has been particularly exciting, and there’s so much more to explore and learn together! 👉 Join me on YouTube Link in my profile 👈 🌟 Conclusion: Harvesting Auto Northern Dragon Fuel at Day 75 has been a rewarding experience. With the plant now drying, we’re eagerly awaiting the final product. Stay tuned for updates on the drying, trimming, and curing process, and get ready for a high-quality harvest! Happy growing, and see you next time! 🌿💚✨ #SuperSativaSeedClub #HarvestReport #NorthernDragonFuel #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney
Likes
10
Share
The plant has recover won't be the biggest but that is fine with me as it's for RSO/CBD oil
Processing
Likes
7
Share
@vertex8
Follow
End of week 6, start of week 7 now, going to be flipping today, all the plants are very healthy, deep green with no signs of any issues, the net is mostly filled out and should hopefully get near full coverage by continued tucking through nthe stretch period. The food has been switched to base nutrients better suited for flower, will be using big bud and overdrive from the advanced line. Wish me look on the next phase 😀
Likes
4
Share
@Chubbs
Follow
What up Fam, I apologize for the late update. Been away for 2 weeks from the ladies and my son who was watching them did amazing, as I came back to an absolute forest. The plants almost tripled in size which is crazy the growth they had while I was gone. I started adding bloom nutes and did a defoliation and lollipop this week. I'd normally start my training around week 3 but over all they're happy and healthy as can be. Let's Go Happy Growing.
Likes
6
Share
@HappyOne
Follow
Very dynamic effect. Keep head clear and no stress. Crafty vaporiser effect is the best.
Likes
47
Share
Veg: She got a long 5 months 1 weeks of growing and growing so big. Kept the feeds up and she drunk everything she got given to her, kept drinking and drinking them foods. I gave her the growth technology grow for the first 4 months of veg and the last month I gave her both growth technology grow/bloom, hydro Coco grow for the last month of veg stage. Gave her so much HST in month 3-4, just kept topping wherever I could, bending her over wherever I could. Really trying the stress her out to make her stretch and stretch. Started to see some real growth in her in the last month of veg stage, just seeing her doubling in size every week till we got in to some true flowering. Flowering: so we got about 8 1/2 weeks of flowering which was amazing. At the beginning of week one we saw some little flowers and by the end of that week we had some beautiful flowers starting to appear. I start pumping as much bloom feed in as I could I was still giving her the grow feed, but slowly bring them down by the end of week 2. We got some amazing weather other these weeks of flowering were we saw these bud truly start to go bigger and bigger, maybe the weather was a bit to hot for the plant at some points in the early flowering as we got some leafs burn from intends sunlight in the greenhouse. In week 3 we had a weekend of extreme heatwave over the country hitting highs of 34c witch in the greenhouse was getting up to 45-50c too hot!!! The water system failed on this weekend as well, what really hit her hard. I did think we was going to loose her that day when I went to see her. From that day I think we all realized that we have to keep a good check on the watering if the days were going to be so hot. I took all the small stems off the plant and really open up the bottom so we could get some more airflow over these really hot weeks we had, it was amazing to get this weather in the UK. Week 4 we did really start to see them buds coming everywhere, the middle of the plant was stretching. By the end of week 4 I think she did stop stretching and started to fatten up. I cut the growth feed out in the end of week 2 but I think I should of kept it up with the bloom feed till we got in to week 4. We was loosing a lot of leaves all over the plant when we got to the end of the stretch, so I pumped her some growth feed with all the same feeds she was on at the beginning of week 5. We did see a lot of leaf improvement all over the plant, with new growth on all the main clones. This played a big part in getting them buds fatter and fatter. Getting to the end of week 5 I stop the growth feed and just gave her more bloom and pk boost double. We really did see some buds popping up everywhere which was amazing and we had no real popcorn corn buds cause of opening her up. Week 6 she was drinking and drinking up everything we would give her no problem, got to get so much food in to her. She must of drunk over 30l of feed mixture doubled in this week. Started to look a lot bushy all over. When we hit week 7 them buds were fat and starting to lean around everywhere so had to give a bit more support, I tide the main clone to the four main canes and then tide all the side clones to wherever I could. She still drunk 25l of double mixture over this week and the temperature in the nights was getting so low this week it would of been getting to 8-14c, then greenhouse did still get nice and hot during the day up to 18-26c
Likes
10
Share
@L1lium
Follow
Es ist soweit! Am Freitag habe ich die fünf Easy Buds nach knapp 11 1/2 Wochen abgeschnitten und geerntet. Leider musste ich feststellen, dass eine Pflanze ziemlich stark befallen war. Ich vermute eine Milbenart oder möglicherweise Fliegeneier. Unterhalb der Blätter waren etliche dunkelgelbe und dunkelbraune Eier, die man auf den ersten Blick kaum erkennen konnte. Bei genauerem Hinsehen sieht man jedoch, dass sich der Befall auf die ganze Pflanze ausgeweitet hatte. Glücklicherweise blieben die vier anderen Pflanzen verschont. Aus diesem Grund trockne ich die Pflanzen auch getrennt voneinander. Die befallene Pflanze wollte ich nicht direkt wegwerfen, sondern erstmal trocknen lassen. Im Nachhinein werde ich schauen, wie ich mögliche Schadensbegrenzung betreiben kann. Die vier gesunden Pflanzen werden in einem geschlossenen Zelt in einem Trocknungsbeutel getrocknet. Die befallene Pflanze habe ich in dem Folienzelt aufgehängt und mit einer Plane abgedeckt. Nach wenigen Tagen der Trocknung sieht soweit eigentlich alles gut aus. Die Eier scheinen nicht mehr zu schlüpfen, sondern fallen von der Blüte ab oder verschrumpeln zu Kompost. Ich hoffe, dass es dabei bleibt. Der Geruch hat sich nach dem Abschneiden deutlich verändert. Schon nach der kurzen Trocknungszeit kann ich einen intensiveren Geruch feststellen, der sich noch nicht so richtig beschreiben lässt. Die Blüten waren stark mit den sogenannten "Sugar Leaves" verwachsen, weshalb ich sie grob getrimmt habe, um sie zum Trocknen aufzuhängen. Nachdem die Blüten vollständig getrocknet sind, werde ich die Buds noch einmal einzeln trimmen und durch meine Trimm-Maschine von Vevor jagen. Der Ernteprozess hat zu zweit circa eine Stunde gedauert. Die Pflanzen waren zum Zeitpunkt der Ernte noch sehr gesund und kräftig. Die Verwurzelung war trotz des geschlossenen Topfes sehr gut. Die schönste Bud hat definitiv die zentrale Pflanze, Greta, ergeben. Nass hätte ich den Bud auf mindestens 12 g geschätzt. Ein Gesamtgewicht des nassen Pflanzenmaterials habe ich nicht ermittelt. Sobald alles trocken und fertig beschnitten ist, werde ich das Tagebuch um den trockenen Betrag ergänzen. Stand jetzt würde ich schätzen, dass der Ertrag aller Pflanzen bei circa 40-50 g liegt, was mich für meinen ersten Grow ziemlich zufrieden stellt, besonders in Anbetracht dieser wirklich sehr simplen Strain. Mehr Infos und Fotos folgen in Kürze, wenn das Curing beginnt. Bis bald! :)