Likes
10
Share
Yayyy first harvest ever. So happy to finally be at this point in the grow 🌅 (Was the obvious faster one of the two and felt like to time to cut her. I don't know if. Messed up flushing, she didn't fade as much but also had minor Cal mag Def at end of flower. Did manage to flush before harvest but maybe not enough water to wash out. REALLY happy with the result, my first harvest down the hatch : )
Likes
4
Share
Likes
3
Share
@AbbyCat
Follow
The sick ones are looking stronger and still really behind, but I think they will all bounce back. The new growth looks healthy, and they look strong for the most part. Just really small compared to the healthy sisters. 4 week veg starting with nut change, removed Voodoo Juice.
Likes
2
Share
She going good,humidifier went dry,so the light was burning her but catch it in time,she catching her self now, haven't water since I transplanted her so just observing..
Processing
Likes
3
Share
Bad vent and lack of temperature and humidity Control. High temperature because of 600w HPS.
Likes
49
Share
@Roberts
Follow
I am dropping a RSV11 from Terpyz mutant Genetics. I ightly scuffed the seed ends, and dropped it in the water. I will wait 24 to 48 hours or as soon as I see a tap root. Nothing else to report on at the moment. Thank you Terpyz Mutant Genetics, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
4
Share
Hella great strain , imma go head n start another 2 of these rite away , love the growth , love d buds d high ohmagahdd well done Royal Queen Seeds , will repeat wit yall cheers
Likes
8
Share
@Kirsten
Follow
14.1.25: I've been readjusting the LST. I just took all the pegs out and reshaped her. I got some new LST equipment in the mail today, have been glad to have more pegs. I got some clips too, but they don't seem to stay on 😕 I'm currently only using the pegs, I have some thicker soft wire, but I forgot I don't have pliers to cut it! Also I'm running very low on Biobizz nutrients, so that could be bad 🤞 17.1.25: I'm quite disappointed that I didn't use a 5 or even better my 10 Gallon pot for PPP2 and even PPP1. Especially the PPP2, which is the Triploid pheno. I'd love to have given her the best conditions to see the full potential! 😕 Obviously, I didn't know when I popped the beans, but it just feels like a wasted opportunity to learn, and that's hard to swallow for me. That's my whole aim with these plants. Despite my regrets in that respect, the plants are both looking great! PPP3 is literally just taking up prime real estate 😑 I can't bring myself to trash a plant, though. Plus, it's interesting in and of itself. Just being as it has stayed so small and only has 3 fingers in any of its leaves in week 10. Continuing to adjust ties and pegs as often as I can, trying not to overdo it. 18.1.25: I have done another large defoliation on PPP1 and PPP2. Also, moderate defoliation on all other plants today. All LST ties and pegs are readjusted. I have turned up the light to 90%. Same distance of between 24-28 inches, depending on height of specific plant. I have increased the dosage of Biobizz Bio-Grow and Fish Mix to give an extra boost of Nitrogen as several plants were showing yellowing. They have responded very well to this. Unfortunately I ran out of my Biobizz nutrients and PH UP. I'm currently using Bicarbonate of Soda to increase the PH after the nutes PH comes out to about 4.1. Obviously, that uses a lot and I only had a 250ml bottle, which I used last run too. This run I have 9 plants. The only thing I'm worried about is the salt build up. Have you used it before? Or any other natural way to increase PH? Please let me know! I've also added Biobizz Fish Mix to help with the extra Nitrogen needed. Watering with 1ltr of dechlorinated water PH'd to 6.3 with the following nutrients;- ♡ 4ml Biobizz Fish Mix ♡ 4ml Biobizz Bio-Grow ♡ 2ml Biobizz Bloom ♡ 2ml Biobizz Top Max ♡ 2ml Cal-Mag ♡ 2ml Ecothrive Flourish. I water with this every 3 days. I did order some more Biobizz Bio-Grow and Bio Bloom. I found some at a reasonable price on Amazon. I still have about 800 ml of Biobizz Fish Mix left, too. It is fairly expensive this time as the plants are hungrier this run. I also got a new bag of Canna coco, which I may use to add a top dress with some dry amendments. Which hopefully will save some cash on the bottled nutrients and stretch out until the end of this run without having to buy anymore. I have purchased a funnel to pour the water. It is difficult, due to the shape of my LST, to water precisely. I have spilt it all over the tent several times 🙄 I've also ordered a 2 litre jug. Currently, I'm mixing water for 9 plants individually in a 1 litre jug. It's tideous. Hopefully, this will solve the issues. Cleaning the tent after watering every time isn't my idea of efficiency 😅 Thanks for checking out my diary 🍃 ✌️
Likes
9
Share
DID SOME MAJOR DEFOLIATION TO SLOW THE GROWTH ABIT. IM GOING TO PUT THE 15 PHOTOPERIODS IN THE 8X8 TENT TO FLOWER BUT I NEED TO HARVEST THE AUTOFLOWERS FIRST. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
5
Share
Another week down. The timer is fully switched back to 12/12. It took a week to get there but the ladies don’t seem to mind. The gruntz is still queen of the show, or the biggest. She seems to want to take over the whole tent. Amazing how big she is getting. The Bruce is a close second. Only a few inches shorter. The widows are there and are nice but they aren’t reaching for the stars like the gruntz. They are all beautiful, what can we say, we love all our ladies. There isn’t any smell off them yet, you can get a whiff rubbing the stalk, but not strong yet. We did a defoliation this week, but I don’t think it shows. We also took a few more clones off the bottom branches. The first try of the gruntz didn’t do so well. Try ,try again. Otherwise it’s been a good week. The Dutchess and I thank you for stopping by, if you see anything we can do better let us know. Otherwise spread some love and share some bud!
Likes
1
Share
Very fun grow. Taste is on point feels like a sativa.
Likes
3
Share
Todo llego a su fin, aun no se cuanto es el peso final pero tieme muy buena pinta. En unos dias actualizamos con fotos del secado y resultado final
Likes
24
Share
Strawberry Truffle - White Truffle x Red Pop & limited seed it came with Chem 91 x Red pop
Likes
8
Share
Only Compost tea mix Worm,cow,fish, rabbit, chicken, two pieces deployed late
Likes
12
Share
#PSICODELICIA®️ 12/12 DESDE SEMILLA Ha sido una excelente planta, se ve una excelente producción a pesar de las condiciones a las que sea enfrentado la planta. Parece que ya no seguirá engordando, ya que si lo hace lo mas probable es que se rompan sus ramas por el alto peso que tienen las flores. Hoy vi sus tricomas y se ven ya en su punto.
Likes
59
Share
Siamo all'inizio della 3° settimana di fioritura..si iniziano a vedere o primi pistilli cazzilli😂😉💪🕉️💚 forza belle mie....