Likes
Comments
Share
@TechDCo
Follow
27/03/2026 Lite defoll and tucked! 28/03/2026 The pistils that have turned brown are a mixture of ones turning brown because i gave them a sun shower after i pollinated some buds. I think more budsites many have got pollinated and picked up an air stream. Never mind; hopefully not all budsites.🤞 Back to rhe Future is a saw eye to grow but she's one hell of a smoke. Lights-Off Nothing to do but admire the beauty of Bubblegum (right) Back to The Future isn't a pretty flowery. She's on the same feed bubblegum but her land race genetics hates nutes. 29/03/2026 Lights on! Topped up reservoirs! Midday; tucked the stretch and a lite defoll I accidentally snapped one top but it doesn't really matter there's like 40 colas! Just means more room for the others to swell! - Watch the VT clip! - keeps getting errors in upload! Will try again later! ....... 30/03/2026 Installed the second Gativa CT E2000! LPT - Low Profile-Training = Indoor Viticulture I coded it the "Tri-Layer Tension Grid" - TLTG! It's not LGBT haha Midday: turned light upto 115% now that I have two installed sharring the same driver. Work with the golden ratio numbers. 66.33.69. Wall draw is 666.6watts. Master controller is lying 🤥 #QuickVideoOfSetup&Grow Diary Entry: March 30, 2026 | The 27°C Truth ​Status: Zoned on Back to the Future leaves. Processor speeds: Overclocked. ​The world is "Jogging" itself—running in circles of Political Jargon and "Made Up" problems. I can smell the False Flag coming like a "Ball Bag"; it’s the scent of the gym, the scent of the seed, the scent of a system sweating to keep the Property Bills hardening. They’ve "had us had," putting "Carrier Bags" on reality and warning us not to breathe. ​But the "I Intel" sees the lag. ​ The Hardware Calibration ​I’ve reset the Parallel Gativas to 100%. The "Master Controller" is throwing a 35 {C} "Jargon" spike at the ceiling, but I know the Structural Truth: the canopy is a perfect 27{C}. The Bellows are humming, the TLTG (Tri-Layer Tension Grid) is locked, and the 60-Cola Army is drinking the "Luminous Pressure" without the "Inverse Square Law" drop-off. ​The Internal Purge ​The Bubblegum gave me the "Flow," but the Back to the Future leaves have given me the "Quantum Scan." Both had Methylene Blue and Hydrogen Peroxide baths and put in Purgatory during seedlings. Biofilm purge of the vortex root gone. Hopefully i get maximum performance for purging the sluge from it acentory DNA the cells. Both have handled the TLTG (Tri-Layer Tension Grid) just fine under this LPT - Low-Profile Training Tri-Layer of nets. Remember: I "POLLINATED" a few buds on theses for my own strain. So they're not hermaphrodite you'll be see but my cross breed with MagicMarkerXZZTOPZ. " - I’ve spent the morning "Feathering the Jolts" of a mad world." ​The Herd: They "Shelve the Lies" and beg for help to fund their own cages. ​The Architect: I fund the ritual. I purge the "Bio-sludge." I am the Charcoal Land that filters the flood. ​ The Shutdown Protocol ​The Glove Firewall is down. My eyelids are finally hitting that "Heavy" gravity. I’ve "Intelled" the speeds of my internal processor from deep meditations and identified the "Logic Leaks," and now it’s time for the Methylene Blue and Peroxide to anchor the repair. ​I’m laying down Fresh as Fuck. The "Farm" can keep its "Jargon." I’ve got the Master Code. "Telling us to relax and just let go; while they show us wars using lego" - Its all in 😁 Fun mane! ........... 30/03/2026 Midday on 100% split; power supply between two Gativas CT E2000s. Back to the Future seems to be enjoying this farm of light scattering photons. This should as well expand the efficiency of the diodes from level the load of heat dispersal. Lowing its throttling rate in a smaller tent. Talking about throttling..... ...Thermal Decoupling & The Wizzard’s Flow ​Status: Hardware relocated. System breathing. Gravity setting in. ​The "Lizards" want everything under the "Drapes," but I’ve just moved the Gavita Internal Controller and the LED Driver out of the cupboard and into the cold air. Inside, it was a "Made Up" furnace—too hot to touch, a "Static" spike that was likely throttling my 666.6W potential. ​By pulling the "Heart" out and resting it on bricks, I’ve given the system the Vascular Flow it needs. The driver can now radiate its "Luminous Friction" into the 22°C Room Baseline, keeping the tent at the 27°C Truth. ​The Architecture of the Feed ​I don't disturb the TLTG (Tri-Layer Tension Grid). I’ve "Intelled" a better way. ​The Tube Logic: I fill the DWC Reservoirs through surgical tubing. No lifting, no "Jolting" the canopy, no breaking the "Pancake" symmetry. ​The Glove Protocol: Black gloves on. Hands-on the hardware. Pure Sovereign Maintenance. ​The Internal Scan ​The 666.6W draw is the "Mark of the Wizzard," but now that the driver is cooling, I’m watching for the "Logic Leak" to plug. If it was throttling due to the heat, the "Processor Speeds" of the photons are about to hit a new Native Frequency. ​The Final Shutdown ​The room is steady. The Parallel Gativas are hammering the resin. The Bubble Wizzard has sorted the thermal lag, and the Glove Firewall is officially dropping. I’m laying down with the "Heavy Eyelids" I've gained 4watts of power cooling the driver. The "4-Watt Gain" Architecture (The Thermal Unlock): ​Voltage vs. Resistance: When that driver was "too hot to touch," the internal components were struggling. High heat increases electrical resistance. By cooling it down to the 22°C Room Baseline, I've lowered that resistance, allowing the electrons to flow with less "Static." ​Throttling Reset: Most high-end LED drivers have a "Thermal Foldback" feature. It was likely "Jargoning" my power—quietly dipping the wattage to save itself from melting. Now that it's breathing, it’s pushed from 666.6W to 670.4W. That’s 4 watts of Pure Photon Pressure you i was losing to the "Lizard" heat trap. ​The Gram-per-Watt Shift: These 4 watts might seem small, but over a 12-hour cycle, that’s extra energy being "Jogged" directly into the resin of the Back to the Future and Bubblegum plants. ​The "Bubble Wizzard" Diary Entry Update ​Status: System Overclocked. Thermal Throttling: Bypassed. - it's all in fun mane; creative writing ✍️ .... End of day: Few hours later; before lights off The Nutcracker "Waltz of the Flowers" - by Pyotr Ilyich Tchaikovsky Lets Dance 🕺 🤪 ...... I see more "Bud-Bearing Sites" per Square Inch than a "Stretched" plant could ever dream of ..... #FUNFACTS When a plant puts all its energy into those massive "Solar Panels," it’s often a sign that it's struggling to find enough Photon Pressure. It expands the surface area of the leaves to "catch" whatever weak signal is available. In the "Lego War" diaries, people see those giant fans and think "Power," but the Architect sees a plant that is shading its own potential. ​The "Airy Bud" Architecture (The Logic Leak): ​The Diffusion of Energy: On a stretched, leafy plant, the Vascular Flow has to travel further. The nutrients are spread thin across long internodes and massive leaf stems (petioles). This results in Low-Density Floral Clusters—the "Airy Bud" that looks big in the tent but "Vanishes" once it’s dry. ​The "Shadow" Penalty: Those big leaves create "Static" for the lower budsites. Instead of getting the 3.0 mu mol/j "Cold Fire," the lower flowers are living in a "High-Fidelity" eclipse. This leads to "Larfy" growth that never "Hardens" into the Sovereign Resin you’re after. ..... The Purgatory Dividend ​Status: DNA: Scrubbed. Hardware: LPT-Hardened. Results: 19% Overclocked. ​I’ve "Pulled the Drapes" on the standard "Seedling Jargon." I put them through Purgatory for 2 weeks with the Blue and the Clear. I "Cleaned the Code" before I "Saturated the Logic." Now, the Bubblegum is hitting like a Quantum Jolt because her Mitochondria are running on "High-Fidelity" fuel. ​The 70°C Flash proved it. The "Numb Throat" is the evidence. The 24oz Target was won 2 weeks into the "Purgatory" phase. . ............ 31/03/2026 ​The LPT (Low-Profile Training) Mechanical Logic ​The Center-Outwards Expansion: As you bend the colas flat under the Tri-Layer Tension Grid (TLTG) with only 1.5 inches of vertical clearance between nets, you are creating a Photonic Vacuum in the center. By tucking the outskirts—the parts that would be the tops—you are tricking the plant’s Auxin Code. ​The Inverse Apical Dominance: Normally, the plant sends its "Growth Energy" to the highest point. By pinning the outskirts flat, you’ve neutralized that signal. The "Bottom" shoots in the center now perceive themselves as the Apex. They "Stretch" into the light, filling the void with New Sovereign Shoots. ​The 85-Cola Saturation: This is why cola count has climbed. Every time you "Defol and Tuck," you are revealing a new layer of the Vascular Engine. You aren't just training a plant; you are Fractalizing the Yield. ...................... ............... ......... ...... .... .. The Architect’s Manifesto: A Guide to High-Fidelity Indoor Viticulture ​This is a blueprint for those seeking to exit the "Lego War" of standard gardening and enter the realm of Sovereign Yields. By applying Low-Profile Training (LPT) and the Tri-Layer Tension Grid (TLTG), we transition from growing plants to managing a Vascular Engine. ​The Overall Explanation: The Pancake of Productivity ​Indoor Viticulture treats the plant like a high-performance vineyard. We do not allow the plant to dictate its own height. Instead, we force a Symmetrical Logic where vertical growth is compressed into a horizontal "Pancake". ​The Tri-Layer Tension Grid (TLTG) is a 3-Dimensional Optical Filter. By layering tension at three heights, we ensure no single branch becomes a "Lizard" and steals energy. This maximizes the Inverse Square Law, keeping the tops in the 3.0 mu mol/j "Sting" while the 24°C Under-Canopy remains a cool sanctuary. ​The Mechanical Logic of LPT (Low-Profile Training) ​The Center-Outwards Expansion: ​By bending colas flat under the TLTG with only 1.5 inches of vertical clearance between nets, you create a Photonic Vacuum in the center. By tucking the "outskirts"—the parts that would naturally be the tops—you trick the plant’s Auxin Code. ​Inverse Apical Dominance: Normally, a plant sends its growth energy to the highest point. By pinning the outskirts flat, you neutralize that signal. The "bottom" shoots in the center now perceive themselves as the Apex. They stretch into the light, filling the void with New Sovereign Shoots. ​85-Cola Saturation: This is how you fractalize the yield. Every "Defol and Tuck" reveals a new layer of the engine, turning a standard plant into an 85-Cola Army. ............ ​The Step-by-Step Guide: (The 24oz Code) ​Chapter 1: The Purgatory Protocol (DNA Scrubbing) ​The foundation is a 2-week bath of Methylene Blue and Hydrogen Peroxide. ​The Logic: This deletes "Genetic Jargon" and triggers a Mitochondrial Overclock. This "Hardens the Code," allowing the plant to drink 1.7L a day under intense light without "System Failure." ​Chapter 2: The LPT Initiation ​The moment the Sovereign Horizontal is established, the "Heart" is decoupled. ​Externalize the Heat: Ensure all drivers are outside the tent. This maintains the 24°C Under-Canopy stability. ​Step 2.1: Use training wires to bend the main stem at 90°. Once nodes appear, use wire to straighten them flat. Alternatively, wait until the plant reaches 4 nodes (creating 8 potential budsites) before pinning. ​Chapter 3: The TLTG Deployment ​Once the "Pancake" is established, lock in the three layers: ​Layer 1 (The Foundation): Spreads the main "Wings" and sets the Wing-Span Logic. ​Layer 2 (The Structural Defrag): Sorts the 85 Colas into a Symmetrical Grid, deleting "Shadow Static." ​Layer 3 (The Support Overture): Braces the plant for the High-Pressure resin "Swell." ​Chapter 4: The Hydraulic Surge ​As the plant drinks 1.7L per day, look for the "Praying" leaves and "Thinner Wings." * The Logic: The plant is "Judging" the light intensity and thinning its wings to ensure the 27{C} Truth reaches the core of the army. This results in the "Numb-Throat" resin density. One can level the intensity of the light out once canopy is reached its full potential. ​Chapter 5: The 21°C Hue Trigger ​The final movement. 14 days before harvest, drop the vault temperature to 21°C. ​The Logic: This triggers the Anthocyanin Overclock. The 20L reservoirs provide the Thermal Mass to keep the roots safe while the flowers turn Quantum Purple, locking in the Sovereign Strength. ​The "Glove Firewall" Final Shutdown ​The Architect has spoken. The "Stillness" is achieved when the Vascular Engine and the TLTG work in perfect harmony. Follow the code, delete the static, and claim the 24oz Target. - "This style of growing only works with DWC hydroponics setups when constant feeding is nesasarry. Or natural light outdoors. I could be wrong. Just remember the Manifesto" - The Architect’s Manifesto: The Outskirt Protocol ​The Rule: Never strip the "Wings. ​The Logic: Defoliation is for the Internal Defrag (clearing the center). The outskirts are for Power Generation. By maintaining the perimeter, you ensure the 85-Cola "Pancake" never loses its "Vascular Velocity." ​The Result: Continuous, un-stunted expansion that leads directly to the 24oz Target. Lights-Off: Trying some premature flowers from Bubblegum (this isn't the first time removing off shoots from the colas)
Processing
Likes
43
Share
START OF WEEK 4 FLOWERING. NUTRIENTS SAME 4 ML PER LITER RO WATER OF BOTH A & B. 2 ML PER LITER BIG BUD. MIXED UP 8 LITERS OF NUTRIENT SOLUTION --------------------------------------------------------------------------------------------------------- Day 64 April 18th - 2019 Both ladies had a little trim to get rid of thick interior. Day 64 April 18th - 2019 Both Jessica Rabbit & Elly May were fed 1.5 liters of nutrient mix. Day 64 April 18th - 2019 Temp in tent is @ 78.4° F. Day 64 April 18th - 2019 Humidity in tent is @ 51%. Day 64 April 18th - 2019 Jessica Rabbits Coco temp is @ 70.2° F. Day 64 April 18th - 2019 Elly Mays Coco temp is @ 70° F. --------------------------------------------------------------------------------------------------------- NOTE - Day 65 April 19th - 2019 The Lady in the coffee can is a clone from the Blue Cookies. The clone was 2 weeks old put in soil in the coffee can It was put in the tent straight to flower No Veg time at all the clump of leaves at the bottom was how tall it was. I have been feeding Her the same Nutrients I am using for Coco flowering with the Big Bud for Coco. --------------------------------------------------------------------------------------------------------- Day 65 April 19th - 2019 Both Ladies are looking good after their little trim. Day 65 April 19th - 2019 Temp in tent is @ 81.1° F. Day 65 April 19th - 2019 Humidity in tent is @ 55 %. Day 65 April 19th - 2019 Jessica Rabbits Coco temp is @ 71.8° F. Day 65 April 19th - 2019 Elly Mays Coco temp is @ 71.6° F. Day 66 April 20th - 2019 Ladies are looking good coming alone. Day 66 April 20th - 2019 Temp in tent is @ 79° F. Day 66 April 20th - 2019 Humidity in tent is @ 40 %. Day 66 April 20th - 2019 Jessica Rabbits Coco temp is @ 69.3° F. Day 66 April 20th - 2019 Elly Mays Coco temp is @ 69.4° F. --------------------------------------------------------------------------------------------------------- Day 67 April 21st - 2019 Both Ladies received 1 liter pre-mixed solution --------------------------------------------------------------------------------------------------------- Day 67 April 21st - 2019 The girls are looking fine. Day 67 April 21st - 2019 Temp in tent is @ 79° F. Day 67 April 21st - 2019 Humidity in tent is @ 47 %. Day 67 April 21st - 2019 Jessica Rabbits Coco temp is @ 70° F. Day 67 April 21st - 2019 Elly Mays Coco temp is @ 70° F. Day 68 April 22nd - 2019 Ladies are looking good no issues. Day 68 April 22nd - 2019 Temp in tent is @ 71.2° F. Day 68 April 22nd - 2019 Humidity in tent is @ 57 %. Day 68 April 22nd - 2019 Jessica Rabbits Coco temp is @ 67.6° F. Day 68 April 22nd - 2019 Elly Mays Coco temp is @ 66.6° F. Day 69 April 23rd - 2019 Both Ladies looking good. Day 69 April 23rd - 2019 Temp in tent is @ 69.4° F. Day 69 April 23rd - 2019 Humidity in tent is @ 61 %. Day 69 April 23rd - 2019 Jessica Rabbits Coco temp is @ 65.7° F. Day 69 April 23rd - 2019 Elly Mays Coco temp is @ 64.8° F. Day 70 April 24th - 2019 Both ladies are coming alone. Day 70 April 24th - 2019 Temp in tent is @ 67.1° F. Day 70 April 24th - 2019 Humidity in tent is @ 61 %. Day 70 April 24th - 2019 Jessica Rabbits Coco temp is @ 65.2° F Day 70 April 24th - 2019 Elly Mays Coco temp is @ 64.0° F.
Likes
42
Share
@m0use
Follow
Good little week I had, plants have grown a bit since I last updated. #1 - 43cm #2 - 36cm #3 - 37cm #4 - 22cm #5 - 46cm #6 - 49cm The Liverworts have also grown a bit as well, happy with that little update. Some of the plants have been beginning to get fragrant. One of them smells exactly like the seeds branded label "Cake or Pie or Cola" but I won't tell you what one just yet, I was shocked and amazed, another is very gassy/fuley/diesely, no note of fruits whatsoever. The rest are al fruity but nothing screaming strawberry. I'm expecting them to mature much more as time goes on and when they enter the curing stage. Still looking like they want more nutrients, was in the upper limit of what I thought they would tolerate well. 1.4EC maybe I push for 1.6EC - 1.8EC Till next week
Likes
26
Share
Welcome to GERGrowDesigns Breeding Cut Phenohunt #1 Diarie Week 8 (Flower Week 1 Day ~8 Since 12/12) This diary is designed for a documentation of an indoor grow, with a strong focus on plant health, environmental control, and optimized nutrient strategy to hold this Genetic and use her for Breeding in Future projects . The Harvested Mother Plant ,can be found in the older Strawberry Cola Sherbet Diarie💚 What happend in the past ? -Cut removed from Mother in Flower Week 2 -Clonex Gel used ~10 days Rooting Process - 2-3Weeks Revege Process -transplanted in 0.3l pot -transplanted in 12litre pot + Bigger Tent -Plant/Health/Root Care -Motherplant Feeding Shema , low EC , Spraymix -Took 9 Cuts From The Plant -Took 6 Cuts From The Plant -Feeding Shedule for Regeneration and Growth -Prepared New Mother Plant -Last Veg Week before Flower -tent move in bigger Home 100x100 -light Switch to 12/12h ,its Flower time 15.03 -One Time nutriets Boost for Flower Switch & Stretch -ScroG Install and Daily Training in First Flower Weeks Grow Setup & Strategy: • 🌱 Genetics: Strawberry Cola Sherbet -Sweet Seeds • 🏕️ Grow Space: 100x100x200cm • 💡 Lighting: 1x200W LED • 🌡️ Average Temperature: ~26°C • 💧 Humidity: ~50% • 🍵 Pot Size: 20L • 🌿 Base Nutrients: Hy-Pro • ⏳ Flowering Expectation: 5 weeks Flower Week One is Done , Media is from 24.03 flower Switch was at 15.03 (12/12) Flower Day ~8 , looks like shes taking the shortcut of 4-5 Weeks Flower Again Like the Mother 🎯 Isnt it Fascinating how Fast some Strains can Develope After Switch🏆 she will probably overun my other Photo Tent which changed 2 Weeks before to Flower 🌱 Also Special attention will be given to Hy-pro during all phases, aiming to enhance Structure , nutrient uptake efficiency, and final quality, while closely monitoring plant response. Feedback, questions, and constructive discussion are always welcome. Community interaction is a key part of what makes competitions like this valuable. 🌿 Happy growing & good luck to everyone!
Processing
Likes
15
Share
@MG2009
Follow
09/26/2020 She is almost done, I gave her a little trim most trichomes are milky still some clear I think about a week before she is done. Hope she gets fat!
Processing
Likes
17
Share
@kcartel
Follow
For the first time I cut the leaves, for more extensive illumination of the upper part, due to the close location of the light of the plant, the trunk trunk grows and does not stretch upwards, I want to cover the entire area of ??the pot with one layer then start the flowering stage at 6-7 weeks I didn’t cut the leaves, but simply pressed them to the ground, since this is my first experience, I think that everything is going well, the plant eats a lot of nutrient fertilizers and looks good as you can see, the temperature in the box exceeds 27 degrees and it seems to her that temper tsya. in many of the moments, I would like to express a special thanks to such a cool grower like ctm_dzagi! Looking at his works of past cycles, I learned a lot and continue to learn, his technique and approach is great! Well, we are waiting for the fifth week)) Let's go!
Likes
48
Share
Die Ernte ist gut, ich bin im großen und ganzen sehr zufrieden wie alles verlaufen ist. Man kann aus dieser Genetik einiges raus holen die Zentrale Koller ist schon Monster mäßig. Auch die unteren Blüten können sich sehen lassen schöne Feste Knollen.👌🏼 Ich freue mich auf das verkosten, sie riecht gäsig mit süßlichen Nuancen. Das Growen mit dieser Sorte hat mir sehr viel Spaß gemacht. Es gab keine großen Probleme, solange man sie nicht zu sehr stresst. Kommt sie mit jeder Gegebenheit zurecht. Ein großes Danke geht an Zamnesia und Plagron, das ihr ein Wettbewerb ins Leben gerufen habt mit diesen großartigen Dünger dieser Strain konnte sehr gut mit diesen Nährstoffen umgehen. Ich bin gespannt was über bleiben wird.👌🏼 Vielen Dank das du mich und meine Mädchen bis hierhin begleitest hast.🙏 Hier ist erstmal Schluss aber nur mit diesem Strain der nächste wartet schon komm und schau vorbei. Bei Zamnesia bekommst du 20% Code: ZAMMIGD2023
Processing
Likes
61
Share
Dam! Where do I start? Firstly I started to get yellow leaves. Secondly I also seem to have stunted the growth. The yellow leaves were due to lack of oxygen. I am using coco soil and I did not realise that the soil can hold up to six times more water than normal soil so that caused a few issues. I also managed to cut the roots when I transferred the plants to new pots. This has also delayed the growth. I think I have managed to get it in time and everything seems to be going OK but I feel the next 2 weeks will be the big tell. I expected the babies to be fuller and taller but hey! I make the mistakes so you don't have to lol. I've no real questions to ask because I think I solved the issue with the help of a fellow grower and a bit of research.
Likes
119
Share
Not enough room.. I cant baby them the way i like to.. Lesson learned.. Sticky already ..leafs are perfect color.. No burns at all
Likes
6
Share
Wow what a week this has been, the plants have all undergone fair dramatic changes. A real flurry of leaf yellowing, pistil darkening/curling, and bug swelling. The smell is really coming along now, I think we're really quite close to harvest. On the assumption that pre-flowering was two weeks, this strain should be ready at the end of week seven flowering, so in the case of this diary the end of week nine (i.e. one week to go!). Pistils are about 70-80% amber, and the lower pistils on buds have started curling inward. Trichomes look to me to be something like 10% clear 80% Milky 10% White. I have smoke tested a small bud off the lower part of plant 3 today after quick-drying overnight in the airing cupboard, taking into consideration the obvious chlorophyll from the fast dry, the high was much closer to what I am expecting than the last smoke test. It came on at the normal pace, was quite effective, and lasted a good while. I am really hoping I can navigate my way through the next process, as I feel quite close now to having some home grown bud for the first time. The plants are being well watered this evening with just water, and this will be the last time that I water them until harvest. I will continue to monitor these daily, I intend to harvest at the first sign of any amber trichome. Advice and comments welcomed. P.S. Exciting news! My order from Green House Seeds arrived today for my next diaries! :)
Likes
18
Share
It's been an interesting week. I had to ask for help with resolving the intense smell coming from my garden... I can smell it from my driveway at this point.. I was advised that I probably turned my fan up way too high, which overloads the carbon filter on the end of my exhaust. I ordered another new one.. turned it down.. and I also had to cut down the cheese auto... all her trichomes were cloudy bit I definatly could have left her for another week... just couldn't handle the smell lol. Ask for help and you shall receive, thanks Growdiaries. And thank you Oozlefinch for the solid advise.. ✌️ I bought a rosin press this week and it's awesome.. she will be used for this grow as soon as things are ready. I cut out my backyard to plan for round #3 for all these plants.. plus a whole lot more! Process/ Environment changes: -Turned down my exhaust fan.. the carbon filter can't keep up with the amount of air being pushed through it.. in the water industry we would call this 'short circuiting'.... The Gorilla cookies is growing well. It's a tall plant with long nugs ( I hope the full out a lot more). I would recommend supporting the branches at this point in the grow. There's a slight smell coming off her and trichome production was late to start compared to most the other plants I have... I suspect she will go past 90 days unfortunately, but I'm excited to see what the finished product looks like. Hitting her with compost teas at a pH of around 6.7 That's it.. I'm on auto pilot at this point.. there's not much I can do except sit back and wait. Thank you Fastbuds
Likes
14
Share
Likes
3
Share
-good week of bulking up -NYC Sour D is still getting taller, gonna have a good canopy -both plants gulping a gallon a day out of the sip pots. -Growdots and recharge. so weird not putting nute in the water.
Likes
6
Share
Watering 2-3 days 2 liters per plant
Likes
14
Share
@Targona
Follow
Fortunately, the girl is still healthy and strong, nothing has changed, she smells beautiful and creates beautiful flowers 😍.