The weather was way better this week then last week. Days are getting shorter and i'll noticed she's getting ready to bloom because she's streching a lot! i'll guess she will show the first blooming signs at the end of this week.

Sixth week of late vegetation / pre-flowering started. I've changed the water into the pots. The fan is turned three hours on, one off. Inkbird parameters are unchanged (20° -3° H +2°C). Plants are healthy and started to be bushy and taller. Light power @ 100%. Extractor @ 75%. D36: plants seem to be healthy. I've changed the water and during the pot cleaning I broke the air stone; repaired it as well I could do. Tomorrow I will buy the replacement. I added 35 ml grow, 30 ml micro and 35 ml bloom. pH @ 6.0, EC @ 1.8. I've used 9 ml of pH- D37: replaced the broken air stone. The plant seems to be ok after passing almost one day only with air injected by the replacement. D38: pH correction at 5.9. Added 1.5 l of water to each pot. D40: added 2 l of water each pot. Plants are growing bushy more than I expected and they are drinking a lot. Removed some lower leaves.

Bananas are doing great, very nice, big, fast-growing ladies. Especially one of them has a very peculiar smell, I definitely get it why they are called Bananas :D I flipped them to 12/12 after 47 days of veg. I was a bit afraid that they were getting too large, I hope they will fill up the remaining space nicely.

03/15 - (M) - Mom is doing great - pre-flowered without any issues and now is in week 1 flower - still running the 8 line drip emitters with offsetting feeds - did some defoliation underneath the canopy - dropped the light down to 75% 03/15 (C) - Clones are rocking amazingly - side shoots are coming in nicely - temps are high and humidity as well - adding Raw npk silica to the feed mix this week to assist with cell wall structure. 03/18 (C) - They are on recovery mode at the moment, got a little reckless with their PH/PPM/EC😑😑😑 - Gave them a hard flush and will only feed clean water for the next week or so - they are bouncing back😎😎😎😎😎

Still going in with mild nutes and seeing slight burns here and there....both growing great...tons of frost...slow growth but seems to be worth it. I did lots of heavy LST so that’s what slowed down the growth...I see most harvest at around 10-11 weeks but we are not nearly there!

Plant is looking great so far I had to flush it 2 days ago to readjust my run off water ph

KAWAAAIIIIIIII

Feb 18: addendum. Just a note to mention that although the baby bud sites are a plenty, Overall growth isn’t as dramatic as I have seen. I have been pruning fairly regularly through the first few weeks of flowering to expose light to the baby buds below, which is working for sure as they are getting bigger. No trichomes tho on the leaves - or anywhere to be seen. This is different from my last photo grow, a NL #5. Feb 14: Valentine’s Day so just a quick note Things are holding steady - bud sites a plenty! I think I fucked up the weeks. It hasn’t been 4 weeks

Either yer scroggin or yer not. Scroggernaut 3.0 full of upgrades and surprises for 2021. Upgrades: 1. 12000 btu ac wall mounted to replace 7000 btu floor model. Will add more control to the enviro dials 2. Additional 240w 301b Viparspectra added (thank you Valerie for the unit) to run dedicated two plant scrog o cheese served on a platter from @greenhouselab 3. Incredible genwtics bred by @wicked_stix and gifted by @wildeweed @autoflowershow 4. Some dank as fuck auto genetics courtesy of Heather😍 and the team @fast_buds 5. Red, white, and blue color scheme (to match my eyes) 6. Aerocloner for all clones Will be running 3 crops over 7 months starting Feb 1. 16 autos to run whilst mothers and clones are developing. 21 photos will be the main show and the season will finish with a late run of another 16 autos. I have chosen my cultivars carefully, have been blessed with what i truly beleive are some of the best on the planet, and i will nake it my duty to bring the full potential out of these beans. Room is dialed and ready. 2160 true watts of top end led gear to make this year boss. Co2 setup courtesy of @Silverback_guerilla and the growmies on my wall to make sure it all goes down proper. 3 grow areas within : one 4x8, a 2x4 floating scrog o cheese, and a 4x4. Gonna pump it out Running Miicrobial Mass trials on 4 of 16 autos, really looming forward to those results. Keep an eye BudXs

Start of week 7 Day 51 was the hottest Day ever 😫

Gracias al equipo de AnesiaSeeds, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Elementz: Presentamos Elementz: Unleash The Elemental Fusion, una oferta trascendente de Anesia Seeds que te atrae al corazón mismo del reino elemental. Esta maravilla feminizada surge de un linaje de genética formidable, que combina la potencia incomparable de GM-UhOh con la energía vibrante de Epic Buzz. Prepárate para ser catapultado a la estratosfera, ya que Elementz cuenta con un extraordinario contenido de THC que oscila entre el 33 y el 38%. Cada inhalación es una odisea, con un perfil de sabor que entrelaza intrincadamente notas de uva madura, frutas exóticas y un toque especiado, creando una experiencia sensorial tan compleja como deliciosa. 🌻🚀 Consigue aqui tus semillas: 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 📆 Semana 2: Gran primera semana, ella ha dado un gran estiron estos días, si sigue así será una gran cosecha. Esta semana se practica defoliacion, poda de ramas bajas y se le agrega Sticky Fingers. La carpa está ocupada al 100%, sigue una floracion explosiva gracias a @Marshydro y @Xpertnutrients y @Trolmaster con esta gran genética 💪. Potencia de la lámpara: 70%

Great growth from all the girls this week. Stretched massively. I have done a major defoliation to let more light to bud sights. 95% flowers are in light now. I will do another Small defoliation next week. Dry amended top soil with bat guano, worm castings and bio life. Should be enough to bring them into mid flower. I had a slight fungus knat issue but got some nematodes and they are starting to clear along with sticky traps. I have also taken cuttings from a few of the girls to cross a few of the stronger strains and create my own strain. First time I will be doing this so excited to see how it turns out.

Auto pilot 🤷‍♂️🏻

Idk I thought I was having some problems some leafs were getting spotty I think it was Ph or too many nutrients but whatever it was it stopped and I clipped the spotty leaves. It's not growing much higher a very short plant its 25 but the main cola without lst would probably be around 30 inch. I believe the leaf death might have also been natural but I clipped leaves anyways for lower bud sites. Don't think much more height is coming with this plant. Hoping buds will fatten up over the next two weeks. I think harvest might even come before that if the signs are right

Hallo zusammen 🤙 Das war es für sie wir sehen uns in 2 Wochen wieder.

We are at day 21 on this Cali snow and she is doing well. Takes training great and she hit a nice growth spurt at the beginning of the week. The girls are getting crowded but the setup is running like a well oiled machine. I will have to get them spread further apart somehow and they will be going under the QB lights soon. If I can keep the momentum going as smooth as it has been we might just get some late summer snow! Happy growing everyone.

Day 18 of flowering! 💚Please Like This Diary and Leave a Comment!💚 This week the flowers start to swell up. The smell is very nice and love this strain to grow🌿💚🍀 Nutrition: not so much, just a quarter of what is asked on the bottle. Smell: plant already have a nice smell, very punchy, skunky, forest fruits Health: nice strong plants, will grow big and flower fast! Red Wine was created by crossing Rozay F2 with Jet A. They are 2 very powerful aromatic Cali hybrids. This exclusive new Cali strain is a very strong and fast flowering indica-dominant strain. It has an aromatic, intoxicating and relaxing effect. That is comparable to enjoying a good glass of wine. Red Wine has an average flowering time of about 7-8 weeks when grown indoors. Outdoors it is ready fairly early, usually around the end of September. The yield is very good. Indoors she has an average yield of 450-650 gr/m². When growing outdoors, 600-800 grams can easily be achieved per plant. Red Wine has an aromatic scent that can be compared to a full red wine. Her full, purple-green buds are very compact with few leaves. This is very convenient when cutting the plants and saves a lot of time. Smoking this weed gives you a nice high with relaxing properties. The taste of Red Wine is very fruity sweet with an aroma of red grapes. Flowering time: 7 – 8 weeks Genetics: Rozay F2 x Jet A 30% Sativa, 70% Indica Plant height outside: 100 – 180 cm Outdoor harvest month: from June to October Yield indoors: 450 – 650 gr/m² Yield outdoors: 200 – 800 gr / plant THC: 25% 💚💚Wanna Try Red Wine from Seeds Genetics💚💚 Link: https://seedsgenetics.nl/product/red-wine-gefeminiseerd/

🌱 Germination Journey with Terpyz Mutant Mentha de Croco 🌱 Hey Grow Fam! Today kicks off an exciting adventure with Terpyz Mutant Mentha de Croco genetics. I’ve got 10 regular seeds ready to sprout, and I’m looking forward to discovering some beautiful female phenotypes—and maybe even a standout male for potential future breeding. It’s been a while since I’ve worked with regular seeds, so I’m thrilled to dive in! Germination Process Overview: Here’s a step-by-step rundown of the germination setup and process, with a special focus on the equipment and nutrients that are helping these seeds thrive right from the start. Step 1: TheCannaKan Germination Pod 🌱 For germination, I rely on TheCannaKan—a device I’ve come to love and trust. It’s designed to create the perfect microclimate for seed germination, and within just 24 hours, the seeds started showing signs of life. By the 32-hour mark, they were all ready to be transferred to the next stage! I can’t recommend this gadget enough for anyone serious about getting strong, early growth from their seeds. • Why TheCannaKan? • Humidity Control: Ensures seeds stay hydrated without oversaturation. • Stable Temperature: Maintains an even temperature around the seeds, so there’s no shock or stalling. • Enhanced Oxygenation: Keeps fresh air circulating, helping prevent mold and ensuring seeds don’t suffocate. Step 2: Transfer to Root Riots & Aptus Holland Supplements 💧 Once the seeds were sprouted, I transferred them into Root Riots, known for their excellent water retention and structure that encourages strong root growth. Root Riots also have a pH-balanced, spongy texture that makes it easy for roots to penetrate, promoting sturdy, healthy root systems. At this stage, I started using Aptus Holland’s Regulator and Startbooster at 1ml/L each. Here’s why I chose these products for early growth: • Aptus Regulator (1ml/L): Helps strengthen the plants against environmental stresses by supporting cell wall structure. It’s a fantastic choice for giving young seedlings an early boost in resilience. • Aptus Startbooster (1ml/L): This product provides essential microbes and nutrients that stimulate root growth and early plant vigor. Especially for regular seeds, the early root development makes a noticeable difference in later growth stages. Step 3: Lighting with Future of Grow (FOG) LED at 200 PPFD 💡 For lighting, I’m using a Future of Grow (FOG) 600W LED. For the germination stage, I’ve dimmed it to around 200 PPFD (photosynthetic photon flux density), which provides just enough light for healthy, strong seedling growth without overwhelming them. • Why Low Intensity? • 200 PPFD ensures that young plants aren’t exposed to too much light, which could cause stress or stunting. This level of intensity is perfect for encouraging healthy development without risking “stretching.” • The FOG LED provides a balanced spectrum tailored to plant growth, setting up these young sprouts for success as they grow. Step 4: Environmental Control with TrolMaster Tent X Controller 📲 For monitoring and control, I’m using the TrolMaster Tent X Controller, which lets me dial in every aspect of the environment to make sure these little ones have the perfect conditions for germination and early growth. • TrolMaster Benefits: • Precision Control: Adjust temperature, humidity, and lighting all in one place. • Notifications: Sends updates in real-time to my device, so I can make adjustments as needed without being physically present. • Consistency: Maintains stable conditions around the clock, reducing stress on seedlings and ensuring they’re thriving. Grow Tips & Reflections: Germination is one of the most crucial stages in a plant’s lifecycle. Starting with strong genetics like Terpyz Mutant Mentha de Croco, combined with a solid germination setup and the right nutrients, creates the foundation for a successful grow. 💡 Quick Tips for Fellow Growers: • Hydration Balance: Don’t oversaturate! Moisture levels should be high enough for the seeds to sprout but not so wet that they drown. • Light Management: A low PPFD for young seedlings prevents stretch and keeps nodes tight, preparing them for a healthy vegetative phase. • Environment Consistency: Use a reliable controller like the TrolMaster Tent X to manage your settings, and consider monitoring tools for real-time adjustments. Shout Outs to the Community: Big thanks to Terpyz Genetics for these incredible seeds, Aptus Holland for their top-notch nutrients, Future of Grow for the stellar LED lights, and TrolMaster for the amazing controller. Also, shout out to all of you in the growing community—you make this journey exciting and filled with endless learning. Let’s keep growing and sharing together! That’s it for the germination update! Next up, I’ll be monitoring growth closely to identify strong females (and maybe a standout male for breeding). Stay tuned for updates on our Mutant Mentha de Croco adventure—this is just the beginning! Genetics - Mentha De Croco https://terpyz.eu/products/menta-de-croco-fern-type?_pos=1&_sid=e9237cbcb&_ss=r DogDoctorOfficial Discount Codes @ terpyz.eu - DOCTOR 15% off Nutrition - @aptusholland https://aptus-holland.com/ Led Power @ F.O.G. Future Of Grow https://www.thefuturofgrow.com/en/online-store/BLACK-SERIES-600-p489093171 Controls @ TrolMaster https://www.trolmaster.eu/tent-x As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so Growers Love To you All 💚