Likes
Comments
Share
12/12 started strech inc let's see what happened for the document here is the quote MPK = Mendocino Puprle Kush FBN = Free Blueberry Nation SBM = Sticky Berry Mints PS = Pink Sherbert OOG = Oreoz OG F+4 scrog reworking withtout any stress for the girls ' new upload tommorow morning :) , i tried too record on 60 sec ( time the HPS go full power after quality of uploading is too bad :( ) the structure of most of the plants so you see they are all healthy :)
Likes
61
Share
everyone is doing great :-) the growth explosion is insane. tomorrow i will top her and pull the net so slowly
Likes
14
Share
Finished trimming the GSC tonight after a 6 day dry. Buds are very sticky and the jars smell like chocolate chip cookies. Lots of 3.5G+ buds (dry). Dry weight is about 88g of buds and 17g of shake/popcorn. Granddaddy Purple #1 is still drying, GDP #2 came out to about 70 of buds and 20g of popcorn/shake. Planning to make concentrates with the shake and popcorn. Even after no cure, I have sampled both GDP and GSC. GDP is my favorite (but GDP has always been my all time favorite) but GSC smells, looks, and tastes better. Planning to let them cure 8 weeks in Amber Ball 32oz Mason Jars, hoping for good final product. Feel like I didn’t do too bad for a first grow! Learned a lot! Cherry Pie & Wedding Cake next!
Likes
16
Share
@710Lino
Follow
Way stickier then from seed it's kinda crazy how sticky these are 👀👀🔥🔥
Likes
Comments
Share
For this germination, I’m using a Cannakan filled with RO water. I keep the heating mat at 35°C to maintain a warm and stable environment for the seed. Once the seed cracks and the first root appears, I remove all the water and add fresh distilled water to the bottom of the Cannakan. I then close it again and keep it on the heating mat at 35°C. Once the root has developed to a decent size, I carefully take the seed out of the Cannakan and transplant it directly into the substrate.
Likes
93
Share
@Hou_Stone
Follow
👨‍🚀👋 My 4 plants from this limited edition are still here and continuing to grow. (Genetics of this limited edition: Hawaiian Snow x Wedding Cake x Gelato 33) This week I start cutting a few lower branches from each plant. This way more energy should be available for the upper branches. All the plants survived my cuts! And keep growing 🙌 For this culture, I would like to let each plant grow with a main bud without "topping". I would like the tent to be filled and look like a Sog in flowering. (a total of 16 plants with 5 strains in this culture) My goal: at least 300g of dry buds🤞 ------------------------------------------------------------ 💧Watering each pot: Day 15 : 0.75 L With a little Bio enhancer ( 0.8grams/L) Day 21 : 0.75 L I use tap water, adjust the ph to around 6 and water ------------------------------------------------------------ 🔥❄️Temperature of the week : Day : 19-23°C (Humidity : 60-75%) Night : 14-17°C ------------------------------------------------------------ 🤩Equipment of the week : Light FC3000 Mars hydro. power 95% at 50cm Extractor 6 inch Mars Hydro. power 1/10. ON 24/24h 2 fans to circulate the air inside the tent. Each on for 30 minutes then off for 1 hour. this rhythm repeats itself in a loop Heating mat 95x95cm. ON 45 minutes. OFF 30minutes. In a loop. The day only ------------------------------------------------------------ Thank you for your visit, it's always nice to see you!💚😀 ------------------------------------------------------------ My Instagram 🌱❤️️ : https://www.instagram.com/hou_stone420/
Likes
67
Share
Last two weeks for these girls! there is a visibile issue on leaves, I bet on nitrogen toxicity... Lowered the feed and let it run until the final flush. I dont see super duper fatty buds but I'm happy with it and wait for the weight of the harvest ...
Likes
77
Share
Hello world, 🇬🇷 the previous week was a small disaster...Michelle, the girl who was in flower for 5 weeks is dead...just like that...it begun as rust on the leaves,like a cal deficiency and in 3 days it spread everywhere...the temps were too high for her,35°-38° C...Damn it's too hot for the plants...the other two girls are struggling with the heat but they seem to be OK,although they have some strange spots on some leaves...have to top dress with Bio Grow this week... the truth is I am a bit worried about them because that kind of temps can kill them...so I go on with them...have a nice week...☠️ ====================================== WEEK11:"SAD BAT TRUE" ☠️Day 74.. Lucy has burnt leaves because of the heat wave...Angie is fine...today the temps have dropped at 31° c... ☠️Day 75...💧watering day, 3 L each, ph at 6,3...next time I will top dress with Bio Grow again...I think they need nitrogen... ☠️Day 76...Lucy has still new growth coming out despite the big number of leaves burnt...Angie looks healthy... ☠️Day 77...this week has passed...it's been a bad week for all,me and the plants...sorry for the few photos...so,see u next week...☠️
Likes
22
Share
@BUZIMAN
Follow
Really happy with these two girls — they’re both looking super healthy and seem to be doing really well ! 😎 I’m just hoping the Pickled Lemon has finally finished stretching (I think she has 😅). I’ve already had to play around with the light height a bit, and it’s now raised as high as I can get it. The Runtz N Roses is starting to stack some really nice-looking buds, and they’re definitely looking promising. 👀 I’m going to be away for 5 days, so fingers crossed I don’t come back to any disasters… especially with coco. 😅🤞 I’m planning on setting up two Blumat carrots per plant. I’ll keep them well watered until tomorrow, then leave the saucers topped up before I head off. I’m also thinking about making some simple cardboard covers for the pots to help keep as much moisture in the coco as possible while I’m gone. I’ll drop the light intensity a little as well and hopefully that’ll help keep everything happy while I’m away. Now I just have to hope they can behave themselves for five days! 😂☮️🤞
Likes
6
Share
Hello Diary, White Widow has finished its second week of flowering. The areas around the flowers themselves are lighter, due to the young leaves and the pistils themselves on the flowers, so it is clearly visible where all the flowers are forming. I am happy with how the flowers are developing and I therefore have much more motivation to take photos. White Widow has started to stagnate in growth, this week she has grown 13 cm., the most compared to her roommates on the "Farm". I would say that at this stage White Widow is taking on her final form and will now direct most of her energy into the development of the flowers. The leaves are a healthy dark green color and so far I do not show any signs that the plant is lacking anything. Watering was every three days, I continued to add CalMg and Bio-Bloom Fertilizer. The conditions in the grow box are now much better. The temperature is around 28 degrees and the humidity is below 50%. White Widow is generally progressing great, which I am very happy about. Here is a short overview of the week. 24/08/2024 - Day 31. Watering. I prepared 9 liters of water. I added CalMg 1 ml/liter, Bio-Bloom Fertiliser 1.5 ml/liter and then lowered the p.H. to 6.0. With this amount I watered all three plants evenly. 27/08/2024 - Day 34. Watering. I repeated the same procedure as three days earlier. 28/08/2024 - Day 35. End of the second week of flowering, or the fifth week from the beginning of the vegetation. Photographing and measuring the height of the plants. White Widow - Day 35. - 63 cm That's all from me for this week, see you soon.
Processing
Likes
3
Share
Like clockwork, all three of these girls sprouted in about 3 days. I've had %100 germination with all my 42 auto beans so far. Didn't feel like any nutes were necessary. Soil mix is about 50/50 Happy Frog and Recipe 420 Bhang. Gonna run Dirty Dozen this time around with a Co2 Dispersal Canister and see if we can grow sum thiccersonz!
Likes
1
Share
I fucked up drying. Room RH is 80% plus but I had fans running.. usually, locally, I cant get my dries to go longer than 3 - 5 days.. been drying for 5 days but with the humidity being at 80% - 85% inside the lung room and tent she hasnt even began to dry. Plus, I havent been able to trim her up yet.. just been jiggling the jar around a few times a day and keeping the jar open, inside the tent with an exhaust fan running and another usb fan moving air.. but not blowing on the buds at all.. but around the jar.. so nervous to get mold!!! Drying still.. but day 3 in jar.. She is still way too wet to be jarred. I have just been shaking the jar around like 4 times a day MINIMUM and keep the jar in he tent with air flow.. humidity is still being a butthead.. but easing up a bit.. down to 70%-ish.. when I do seal the jars, it still reads a little over 70%.. I will keep doing this until I get to about 65% or possibly even as high as 68%.. as long as I keep up the burping.. but so far, I just leave the lid open and keep it in the tent with a couple fans running.. no mold, so she should be good.. still gonna keep flipping the buds a few times a day.. this is going to be some DANK! already tried a few nugs.. still alot of chlorophyll, but she is slowly getting to the cure zone!!! Drying day 14.. Finally got the jar down to 65% RH.. that took alot of rolling the jar (to move buds around).. at least 4 - 5 times daily for this entire time I trimmed the buds and put them into the jar waaaay too early.. no mold tho.. and the buds dont tear apart anymore. They should start to crumble (kinda) in the next 2 - 4 weeks.. but going to see how things (including weather) are going to go if I only burp once or twice daily. I kinda want to bring the RH down a bit still.. like 62% 🤔 ah shit, I'm so indecisive lol.. probably leave it at 65% for a couple days and then try to get it down to 63% or 62%.. but once I see 59 or 58%.. it should still be good, but I get worried because I have overdried MANY harvests.. just trying to get things dialed in with drying and curing still.. even 4 years into this stuff! Lol.. but I'm getting a better hang of it.. kinda using my own methods mixed with what I find online.. just hard to judge when the plant is ready by snapping stems.. ive waited till the smallest stem I could find was making the "snap" noise.. but when I did that, the RH in the jars was only at 55% and lower.. the taste and smell were completely gone halfway thru the cure.. ive read that anywhere from 55% to as high as 70% RH is good.. but even at 70% I still have wetness issues.. buds and stems tearing.. still tastes like pure chlorophyll.. but since I've been kinda getting my dries dialed in, so I try to UNDER DRY to get buds to about 70% (that's in jars, not room). I really feel like this doesnt get explained enough in forums and online.. they tend to leave out some very important details.. like what to do when you overdry or underdry your flower.. if its too low, its trash. A 62% boveda and/or integra boost humidity packs can only do so much.. they have helped me, but only if the jars are still above 55% RH.. anything lower has completely removed terps within 2 weeks or so.. but yeah. In 4 years of trial and error (and yeah, forums and other grow diaires), I have found that it is better to UNDERDRY and either burp the jars MULTIPLE times a day (at least 4 - 5) or take them back out and let them dry for another 8 - 12.. maybe 16 or even 24 hours.. depending out how wet the flower still is and the drying area. Anyways.. im stoned and just finger fucking my keyboard here.. but this is very useful info that I have found works for me.. if people dont agree, hey thats cool too.. then these are just notes for myself later 😋 OK, I'm done now.. will keep updating as I go! About 5 days into curing... Got the jar down to 62% - 63% RH so I can stop burping so much.. maybe a short burp twice daily for a week then slow it down to once a day and eventually just stop burping. Been keeping my hand out of the cookie jar for the last... 2 maybe 3 days. I'm going to try and only test a nug once a week to get a feel for how quick its curing and how much better the taste is from the previous week. Did this last grow and each week was a huge difference.. even at week 6! But she was more than ready at week 4!.. not sure how some can cure in 2 weeks unless you get it really dry.. which makes me nervous cuz at 55% RH, I've had horrible results. Trashed the whole remaining harvest.. this is why I like to try and keep the RH a little on the higher side (68% or 65% or so and slowly bring it down to 62% or 63%.. also called the "pre-cure" phase) but I want this harvest to hover around 62% for as long as possible because 62% seems to be the magical sweet spot when you leave them there for the entire 4 weeks.. just my experiences.. Buds aren't very dense, but I'm pretty sure thats due to harvesting a week or 2 too early 😢.. and leaving her in te dark for another 5 days or so before harvesting.. oh the horror she endured toward the end of her life.. she was a fighter tho.. no mold.. in ANY of these super high RH weeks she went thru during the most vulnerable parts! Harvsting, drying and pre-curing.. but not 1 speck of mold 😁 About 10 days into curing.. Yeah I wish I could have let her go another week or 2.. yield was defintely hurt.. quality could be better.. but it will do for now.. live and learn.. I seem to say that every grow 🤣 but still a nice, decent stoney, still pretty decent tasting smoke.. going to just do some small, short burps for the next week or 2. Want the RH to still come down a little.. but if not, meh. The RH (outside and indoors) has been high again.. but luckily I was able to get the RH in the jar down to 62% - 63% RH.. i just burp the jar for a few seconds.. remove the hygrometers and flip the buds.. then put the hygrometers back in, clos up the jar and let it sit till the next day. RH is so high in the room that it raises the RH in the jar a little. But they always go back down to 62% - 63% RH.. good deal. Waiting for a dry day to burp outside for a few minutes. Need to invest in a powerful dehumidifer.. ugh.. Somewhere between 3 and 4 weeks of curing... Yeah definately shows that I harvested early. Still an ok smoke. Could have been fatter.. could have been tastier.. definitely NOT Ethos fault. Kicking myself for not letting her go 1 - 2 more weeks. Wasnt by choice tho.. life happened and she had to be chopped. Just ready for a little warmth and I will begin the next run!!!
Likes
28
Share
* ***************** Week 1 of Growth From Seed, April 11 to 17, 2020 - Days 1 to 7 from germination ********************** * Okay, we are off running now. Through germination and was delighted to experience 100% success rate👍 Killer Kush in other diaries has been more squat but a thick grower........time will tell😀 So far this pheno has been slower coming out but I notice she was a fat seed and her leaves are already thicker as well on her first set of true leaves........maybe a slow Indica?? Sweet Seeds is always solid and expect this girl to bring a smile at some point👌👍 Greater focus on VPD this run. Already pushing the humidity higher than I ever have with having controller set at 72% with temperature at 79 degrees. I have been reviewing the numbers and I have normally been close but it looks like I have to raise everything by about 10% and for a few weeks long😬😬😬😬😬😬 Trust the science and lets learn some more from this grow!!! *****Daily Detail: Apr 11, Day 1: - VPD - 1.2 - 500ml first watering given with nutrients as listed. (minus Velokelp) - pH water to 5.6 - Girl is up and looking like she is ready to go. Apr 12, Day 2: - VPD - 1.0 - 500ml feeding with VeloKelp @ 2ml/L, Piranha & Voodoo @ 1ml/L. pH to 5.6 - lowered light intensity a bit more. - leaves are wide already on her first set. Apr 13, Day 3 - VPD - 1.2 - 500ml water with 0.5ml/L each of Piranha & Voodoo, Dual Fuel. - 300ppm with 5.4pH. Apr 14, Day 4 - VPD - 1.1 - 500ml water with Virtathrive and Piranha & Voodoo Juice @ 1ml/L, VeloKelp @ 2ml/L, and SensiCal @ 0.5ml/L. - 210ppm with 5.5pH. - She is gaining speed!!!! She is the fastest out of the bunch now. 2.5” tall and pushing out her second leaves pretty hard.😀👍 Apr 15, Day 5 - VPD 1.0 - 250ml water with VeloKelp @ 1ml/L. - 95ppm with 5.4pH. - She was a little slow in the seed but has been doing very will getting taller so far. Apr 16, Day 6 - VPD 1.0 - 500ml water with Piranha & Voodoo @ 1ml/L, Vitathrive @ 0.5ml/L, Dual Fuel @ 0.5ml/L. - 300ppm with 5.8pH - Her leaf tips are staying more horizontal. Colour is good and she getting thicker leaves. Leaves really separating. - Moved all the girls today one spot in a clockwise rotation. - Noticed more residual moisture on the bottom of the pots than anticipated. Apr 17, Day 7 - VPD 1.1 - Turned on flower light on UnitFarm this afternoon and they are happier. - Dry out day today and no added water/feed, just misting. - Let the medium dry out a bit and give a nice week 2 feed tomorrow.....they are ready for a little more nutrients now. - She is doing well. Second set of leaves out, will be working on third soon. Wide leaves. She is leaning a bit🍺🍷😃👌
Likes
10
Share
@Dreadnug
Follow
Plant has been getting straight pH balanced water this last week and minimal nutes. It is showing some slight nute burn so I let off a bit and raised the light canopy about 6”. I discovered that what I thought was a calcium or potassium deficiency was actually a rookie grower error by me. I have an RO system that I use to water all my strains in the grow room including this one, but when adding nutes to the water, it takes too long so I had been filling them up with well water. When I had originally tested the well water, I must had used a faulty testing agent as after testing it this last week, I was showing a pH of 7.5 vs. my RO of 6.2. Thus, every time I was adding nutes (multiple times a week) I was significantly fluctuating the pH between regular feedings and nutrient additions. To make matters worse, when I originally thought it was nute burn, I flushed each plant with well water and likely caused additional stress. Anyway, I have since learned that the well water needs to be treated, I only utilize RO water the last few days and plan to do so over this next week. Also, I have turned off the CO2 system as I was starting to see signs of heat stress on a couple of the strains (not this one). The literature I have reviewed suggested that these strains might be able to handle heat closer to 90F but it was also causing issues with high humidity so when I added a dehumidifier, it pushed the day temp to between 90-92F and the overnight temps were not getting low enough (maybe 85F or so). Maybe I could leave out the dehumidifier, but I was getting rH of 70% and didn’t want to risk any bud rot or mildew growth. So for now, I have turned off the CO2 and am getting high temps of 81F with 60% humidity and overnight temps of 74F and 50% humidity. The Future #1 has shown the least signs of stress and is fattening up its buds very nicely. Over the next few weeks I will start monitoring the trichomes for a nice milky color for harvesting.
Likes
210
Share
Top strain. Big monster yield. Really hard stems. So beauty buds. I will upload more info when it will be cured. I will upload smoke review and dry weigh too
Likes
4
Share
questa creamzilla cresce Super bene robusta spero che anche i fiori vengano Super grandi 😂😉
Likes
11
Share
Hold Your Machetes, Growers! This Lady's Got a Surprise! I know, I know, week 10 is supposed to be harvest time, the moment we've all been waiting for. But hold onto your hats, because my girl had other plans! She decided to throw a MUTATION PARTY, and let me tell you, it's getting wild in the grow tent! My main cola, that beautiful, bodacious babe, decided to stretch by a whole 10cm, packing on tons of frosty white flowers. Talk about top-heavy! She's thicc with a capital T, and oh so juicy. Now, I couldn't let all that goodness go to waste, so I carefully trimmed about 20g of the smaller buds that were ready, leaving my main cola to continue its glorious transformation. ✂️ But wait, there's more! This sassy lady also decided to turn one of her leaves into a full-blown flower. Talk about a genetic surprise! I don't know if it's the Plagron or the Zamnesia genes in her, but I've definitely never seen anything like it. So, here's to unexpected mutations, XXL colas, and plants that keep us on our toes! Stay tuned, growers, because this is one grow diary that's about to get even more interesting.
Likes
22
Share
8/5/23 - Day 54 - Last night, a successful water change took place. I've attached a picture of the bucket at the top for reference. While I currently perform manual water changes, I have plans to automate the process using the available hookups. Unfortunately, the unit was shipped quickly, leaving me no time to set up the automatic system before receiving the LEAF box. However, on my next grow, I'll ensure the drain and water inlet are properly connected. During this current grow, the bucket you see at the top is always connected to the drain as a precautionary measure. I can activate the draining process through the app, and after two cycles, all the water, including the water collected by the dehumidifier, is efficiently removed. Following the draining process, I fill the box with RO water, and from there, the LEAF box takes over and automatically dispenses the necessary nutrients. This automated system has made the whole process incredibly easy, eliminating any guesswork. I simply empty and fill the water; everything else is expertly handled by the LEAF box. The flowering stage is progressing exceptionally well. The plant has ceased growing upward, and the buds are now thriving and reaching new heights each day. I find myself eagerly looking into the box daily, excited to witness the changes, especially around 2 pm when I can observe the growth since the morning. It feels like Christmas morning every day! As always, I'll keep adding daily pictures to document the incredible journey. 8/9/23 - Day 58 - It's been a few days since I have posted. Thats because Shes growing bud like crazy. You can see the plant has focused on growing the buds because the plant has stopped stretching up and started swelling the buds. We have about 3-4 weeks until harvest. This has been the easiest grow of my life. Basically, I add some water to top it off and that's about it. I have been moving some branches down as they start to get a little to close, but other than that not much input from me. If you are looking for this experience, check out https://www.getleaf.co/