So forgot to add last week I took out the scrog net as I personally think the plants were to far into flowering now to be trying to tie them down! This week I’ve been trying to check trichomes!! Also I’ve added canna pk13/14 nutrients! As I think there getting closer to harvest time! I’m planning on using this 13:14 for two weeks feeding?? Then flush for 7-10 days with just normal soft tap water ph’d down to 5.8!!?? Also ordered a microscope just waiting on arrival! So I need to keep checking these trichomes until turning a little milky?? But overall still happy with my first grow so far! Notice leaves are turning yellow do I trim them? Or let them die naturally? Any help still needed cheers

i have now moved it to its last pot. it was a bit stressful for it and i hope it recovers well. the root formation looked really good. it is now in an autopot system and is being fed with HESI fertiliser.

Chopped earlier than expected. I thought it was finished., I dried for a couple of days until the branches snapped without bending. Usually the good old stuff you can find from websites concerning this.

Очень высокие растения, все место занято, а они все растут и растут хотя должны уже расти не вверх а в ширь :) Ожидаю что растения наконец начнут набирать массу :) одна девочка лидирует, остальные пока отстают. Высота растений 1 метр, кроме одной малютки которую пришлось поставить на ведро что бы солнышка больше доходило. Поставил угольный фильтр и он работает на ура, запаха нет, только в самой комнате

Hola a todo el mundo!!! Les cuento que la plantita gracias a Dios , se ha recuperado al stress inicial. Si bien para la cantidad de días que lleva esta pequeña, logró pasar esa saturacion . Esta semana solo he regado con agua y en una sola ocasión la regue con amazonia roots de NAMASTE, ml x litro de agua. Y eso fue todo En total al día de hoy lleva 28 días desde que la puse en la tierra.

*Week 4 Flower 09/24* Both Mimosa girls appear to be running fine with Mimosa (1) running a little behind but is catching up accordingly. Small oversight in early growth resulted in a minor stunt but she is improving dramatically. Water Feed has increased by half a gallon ( 1gallon clean - .5 gallon nute feed) *Week 4 Flower 09/28 - Mid week update* Both plants are flowering accordingly - Mimosa (1) is a bit taller then Mimosa (2) Buds are becoming dense and covered in trichomes. No deficiencies - No areas of concern - Potassium and Phosphate feeds continue *Week 5 Flower end of week recap - 09/30* Both Mimosa's are flowering nicely - Budsites covered in frosty trichomes. Mimosa (2) looks shorter but that is because her COLA was tied down to expose bottom budsites.

Still haven't trans set 1....gonna jus wait till I get to move them out the green house so it will be new home new atmosphere....set 2 amma jus top dem up for a week or 2(only using half the pot with soil) other than that everything else seem to be on point(2 that were struggling condemned one and put the other with the new set coming up... Trans new cutting to some small pots all (30) lived...they are coming along well Mother tree doing her thing putting on some fat iced out nugs scent is hitting n she is mad sticky jus dense up time now and wait for dem trichomes to reach

29.06. Girl Scout Cookies-Day 65# 29.06. The plants have finally started growing again, some have almost completely recovered, some are still recovering, and some are in critical condition. The plants stopped growing for almost a week, maybe even that long, during those days they literally made no progress, the situation only worsened to the extent that I was sure that all but one plant would wither... There were storms yesterday and the day before yesterday, and that's why I'm late with the update because I couldn't take a picture of them, the gusts of wind were really strong. Watering is now more frequent and abundant, now I water them every 3rd or 4th day, everything depends on the temperature on those days, whether there is wind, how much moisture there is, etc. The last time they were watered was before the storm and they are already thirsty today as you can see in the pictures, it will be a day and I will water them in the morning. Today I removed their leaves again and now I can freely say that they have twice as few leaves as they should, so when it's time for defoliation, I probably won't do it at all, or at least not a lot. The day before yesterday it was the end of the ninth week for the plants, now they are already in the tenth, but in order not to miss the ninth week, I will write it in the ninth and I will write the next update 2 days earlier, more precisely, on time. The day before yesterday it also rained, there was a downpour for about 40 minutes, but the spray that I sprayed on the plants failed to absorb, it simply stuck to the leaf, it is greasy, you can see that in the pictures, the leaves are shining. I think the biggest problem was caused by the fact that it sticks to the leaf and when the sun is strong, the leaf simply burns. In general, do not use the product from the last picture, it can easily kill the plants. Most of the plants have almost recovered and are getting better, however, the rain can't stop that shit and I also tried to wash it, but it's not worth it, so there is a high probability that the problem will return when the temperatures rise again and the UV is almost extreme and that could be a problem... the temperatures have normalized again to 30 during the day, but in 4-5 days they are announcing again around 36-7.. I will copy the problem that befell the plants from the previous two diaries of other strains from a few days ago in order not to explain everything again, so whoever is interested should read it in more detail. 25.06. the condition is medium sad... the plants have not progressed at all, why? Well, because I'm a moron who doesn't think... Basically, what happened.. I sprayed the plants with an organic preparation against thrips and similar pests and if there was no need for it because this is growing outside and absolutely these little things can't do anything for them except something miserable to slow down their growth, but nothing terrible... and now, I didn't even want it to slow them down miserably, so I ordered a product called "SMC Spidermite Control" I sprayed the plants overnight, the next day when I came to the site, I had something to see... which is the worst I sprayed all the plants, instead of checking on one and only then spraying the others...autos I wanted to spray all the same, luckily I only sprayed 5 of them, as if God himself told me "wait until tomorrow to see how the plants will react" and continue...I come to the site and I have something to see...all the plants, but all, some more, some less, but the leaves were massacred blue, black, purple, there were all colors, everything was there, but the least healthy leaves, as if I had sprayed them with the biggest poison, I think that even in that case they would have passed better... was it the product itself or the sun that was strong during the day (I sprayed them at night and the nights were around 18 C in the coldest part of the night, so they had time to dry, it's not that they couldn't dry, but it all stuck to sheets, it was all shining, I think they could see how bright it was from the plane, but literally... I removed almost 50% of the leaf mass from some plants, from some smaller ones... the tips that were supposed to grow and be ready for a new topping just started, so they had stopped completely for a couple of days literally... the situation is now as you can see in the pictures, there are a few leaves that appeared after spraying with that product, and it is still appearing, but very little, just, just, and this there was no point in leaving the leaves that I plucked because they were completely destroyed, I have never seen them in my life... The site I bought it on said that the preparation was organic and completely safe, nowhere did it say that it can literally kill the plants, not even on the preparation itself... I am very sad about this, I have been spraying them with clean water every morning before sunrise since it appeared and the tops have slowly started to grow, this crap is appearing less and less, and I have no more leaves where should I remove it, I would just kill the plants... I hope they will recover (except for one plant that is in a critical condition and the automatics that were sprayed are also in a very critical condition, they are young and will hardly survive this) but if not, I have another white runtz that is not in the diary, it is a little more than 3 weeks old, so I will transplant it into 200 liters of soil, so at least something will come out... I feel very sorry for the plants, I already have enough money invested, and this is also my therapy, cultivation heals me… I'm very angry with the people who sold it to me, and they didn't warn me about such a thing, if it's not written on the bottle itself and on the website, and I've been buying from them for years and they know what I'm growing... the product is not cheap, I paid money for something that will kill my plants, fuck... I mean, fuck money, I feel sorry for the plants, but you understand what I'm saying... I'm also angry at those who put the product on the market in the first place, and I would say all kinds of things I did it, but it's better to keep quiet... and mostly I'm angry with myself because I believed what it says and didn't check the product, like the biggest amateur... But what's here is now, let's move on... Today is the 57th day of the plant's life, yesterday was the end of the eighth week. Watering is now more frequent, every 3-4 days, it depends, the heat is already high, today it was at least 40 C in the shade, the forecast says 35. Since the last update, the plants were fed once and for the first time after transplanting, this morning most of them were fed for the second time, the next watering or two will be with clean water. Stay High and Keep Growing!!! Growers, please avoid this crap, the product is called " SMC Spidermite Control" This crap seems to have been imported from Ukraine,from chernobyl directly, not from UK lol Only Positive Vibes Stay High and Keep Growing!!!

Plants just received their last feeding. Only ph balanced water for the last 2 weeks to flush out nutrients. Leaves are starting to yellow showing signs of being almost ready for harvest. The trics are about half cloudy.

Day 28 flower.! 😏Almost halfway. Had to get a larger area bc the 10x10 bedroom wasn't cutting it. Hard to water when plants fill tha whole room😭. So I upgraded and got a 10x20 workshop behind my house and wired a 100 amp subpanel in there so I should be good for abt 10K watts next grow😎... if I can wire my whole shop on FaceTime with a friend who is a certified electrician then trust me anybody can do it. Yes it was my first time wiring ANYTHING in my life. Which is crazy. It pays to have great friends.

Growin

🙌12/12 to bloom.🙌 I changed the light cycle last week because I was tired of the vegetation phase. and a lil bit lazy w and upload - sorry! Some side shoots were removed, then I let them rest for a while (3 days) before switching to 12/12. I can still see the (N) surplus inside my substrate, this will NEVER EVER HAPPEN AGAIN💀 we'll see how this affects flowering 😎 Due to the inner substrate of cheap soil, which has a poor NPK value, I now perhaps have a construction site that can be worked on. The plants continue to look very good, except for the (N) surplus and a little (K) blockage which I can remedy this with some Epsom salts.

Week 17 Day 113 (04/12/2020)💧: Nice start to the week with a watering. Just as last week, I will be giving her the increased nutrients until the flush. So today I gave her 1.5ml of BioGrow, 6ml of BioBloom, and 6ml of TopMax. Day 114 (05/12/2020): The trichomes were looking beautiful today! You can see in the pictures that some are getting more amber now which is a great sign as I thought this girl was going to develop them later than the others in the tent. But it looks like she will ripen right on schedule, at the same time as the others. Day 115 (06/12/2020): Took a quick pic of the tent but didn’t have much time to check the girls properly. I’m sure they are great as always 👌 Day 116 (07/12/2020)💧: I watered the girl today with the same nutrients: 1.5ml of BioGrow, 6ml of BioBloom, and 6ml of TopMax. The buds on this girl are looking super dense! I hope that this 6ml of TopMax will fatten them up even more in the next few weeks before harvest 😄 Day 117 (08/12/2020): Didn’t have time to take pictures today actually Day 118 (09/12/2020): At first this girl was smelling the least out of all the others but now it is actually getting a much stronger earthy smell which I am loving! This one is definitely a couch-lock girl 🛀 Day 119 (10/12/2020)💧: Watered the girl today with the same nutrients as last time giving her 1.5ml of BioGrow, 6ml of BioBloom, and 6ml of TopMax. I took some videos and close-up pictures and she looks incredible! Also looking from the trichomes, I noticed some more amber ones so I am thinking to even start the 2 weeks flush from next watering onwards and prepare for harvest! Will assess the trichomes in a few days and decide.

.

She is looking beast. She caught up to her sister but won't need to be topped. The leaves are not showing any discoloration on the Gaia green. Just add water...

Día 37 (08/07) Ajustes de LST en todas las plantas! 🚀 Día 38 (09/07) Ajustes de LST en todas las plantas. Las ramas inferiores están creciendo como un cohete! 🚀😍 Riego con 250 ml H2O pH 6,5 Día 39 (10/07) Las plantas se muestran sedientas! Creo que el cepellón está lleno de raíces y piden el trasplante! El crecimiento no se ha visto afectado de momento Riego con 500 ml H20 pH 6,5 Día 40 (11/07) Paso a regar con 500 ml / día, ya que hace mucho calor (30 ºC) y efectivamente las plantas ya han copado la maceta de raíces Riego con 500 ml H20 pH 6,5 Día 41 (12/07) Riego con 500 ml H20 pH 6,5 Clones! Mi experimento vuelve a demostrar que NO necesitas complejos productos de clonación ni sistemas para obtener clones! Hace 15 días puse 2 clones con el tallo sumergido en miel durante 5 minutos en una maceta de 400 ml con PRO-MIX HP BACILLUS + MYCORRHIZAE He mantenido la humedad alta con una cúpula de humedad casera hecha con una botella de agua PET de 5 litros cortada por la mitad y pulverizando a diario. Han estado los 15 días en mi terraza con luz indirecta, y temperaturas que rondan los 30 - 32ºC durante las horas centrales del día Hoy los he trasplantado a una maceta de 1 litro porque ya habían formado raíces y empezaban a formar nuevas hojas! 🐥🐥🚀🐥🐥 Día 42 (13/07) Riego con 500 ml H20 pH 6,5 Día 43 (14/07) Trasplante a maceta definitiva de 21 litros de ROOTPLUS Pot de GSKOREA GLOBAL! Estas macetas son una maravilla! Proceso de trasplante: Se prepara con 17,85 Litros (85%) de sustrato PRO-MIX HP BACILLUS+MYCORRHIZAE + 1,05 Litros de Humus de Lombriz (5%) + 2,01 Litros de Insect Frass (10%) + 210 gramos de Earth Vibes Super Soil (10 g/L substrato) Se llena la maceta de sustrato con las manos (limpias) y rompiendo los trozos más gruesos, para que el sustrato esté aireado y esponjoso, sin presionar Se coloca una maceta vacía de 6,5L para que quede la forma perfecta de la maceta donde están actualmente Se espolvorea la parte proporcional de la probeta de microorganismos sobre el agujero de trasplante Se saca la planta de su maceta actual (bonitas raíces 😍) y se coloca en la maceta final Se riega muy lentamente hasta percolación profunda con H2O EC 0,5 pH 6,5 Una vez asentada, complemento con un riego de 500 ml con 25 ml/L de Humus de Lombriz Liquido Se coloca mulch (acolchado) de paja para evitar traspiración excesiva y cuidar a los microorganismos del suelo A ver como reacciona al trasplante! Aplicación foliar Kelp hidrolizado de Lurpe Solutions a 0.25 ml/l Realizo ajustes de LST aprovechando el trasplante a la nueva maceta. De momento tienen una canopia muy bien formada! 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

Eccoci qui... Ormai manca davvero poco ci siamo quasi.... Ora niente più fertilizzanti solo acqua ed attendiamo la maturazione.. Seguiranno aggiornamenti, grazie a tutti per il supporto🔥🌲❤️

ALL THESE PHOTOPERIODS WILL GO IN THE 8X8 TENT ONCE THE AUTOFLOWERS ARE CHOPPED AND I WILL SWITCH THE LIGHT TO FLOWER THEM IN THERE FOR MORE ROOM FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Easy germination for every strain, no stretching problems.