voy por el mes casi. y la mas alta pasa los 30 cm . las otras promedian los 24.5. cualquier sugerencia gracias

D13 - BOOM! The new #1 had made her modest appearance. Only the top of the seed is visible so far, but it's a start. :) #2 is moving along nicely, quietly doing her thing. D14 - #1 is still shy and hasn't fully emerged yet, but she is at least poking up more than yesterday, so there's progress at least. #2 is doing great, and I like her structure. Short and stout with large leaves and very short internodal spacing. She is 7 cm tall but already 11 cm wide. I also cut back the cover crop as it was getting a bit wild and partly overshadowed the girls. Since starting the grow, I have yet to water the girls properly, but they did get a little bit a couple of days ago when I had some extra after watering nematodes (against fungus gnats) to our regular houseplants. Better to be proactive than reactive ;) D15 - I started a simple compost tea consisting of worm casting, rock dust, algal limestone, bentonite, biochar, and molasses. I'll leave it brewing overnight, and then it's watering/feeding time tomorrow. D17 - No idea what is going on with the first girl, but it sure isn't much. The seed has maybe emerged for another two millimeters from the soil, but that is it. The seed hasn't cracked, and no leaves are visible. Hell, I can hardly see the stem. Yesterday, I gave each girl about one liter of the compost tea that I started a couple of days ago. Let's see if that helps, although, at this point, I kind of doubt it. As always, I completely forgot to check the pH of the tea. I have no idea why I keep forgetting that with my teas when I have no problem checking the pH when I use plain water. Oh well. Not the end of the world but something I need to keep in mind for the next tea in a couple of weeks. The second girl looks great, though, so that's something at least. D20 - Alright, it is official. The third girl died as well. The seed never cracked, and the stem went limp. I have no idea why this happened, and now I'm out of Colorado Cookies seeds, so that's that. I have already planted another seed to see if the problem persists with another strain. I will make a separate diary for that one, though. On the positive side is that the remaining girl looks strong and healthy. She is now 9 cm tall and 18 cm wide on this last day in week two of veg. Upwards and onwards!

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 6/4/22 🤘🐱 Week 6 is here!! The "Fast" strains are getting super close, I think they'll be finished by week 8..calmag issues came up the minute we ran out, we got some more today and gave them all a good dose but we're cutting all nutrients after today, they'll get water only until harvest (color be damned lol)..The White Widow fast can eat a ton but the Amnesia fast seem very intolerant to even light nutrients...the separate feeding regiments in the same tent hasn't been fun but I'm glad its now behind us..We have a Chemdawg#4 in the same area but she appears to be weeks behind the "Fast" strains..We're excited for this harvest, our personal supply is getting dangerously low. again lol...we have several White Widow Fast clones we may flower immediately after these, or give away to family, smoke quality will be the determining factor...The SP-3000 is the best light of its size we own, this is the 3rd complete grow and we couldn't be happier with how dense ,tight and long the buds form..,strains we've grown in the past under CMH/HID (315watt) do so much better under the Marshydro,... its the only tent we have that we don't worry about getting complete coverage corner to corner, absolute best bang for buck imo... thanks as always for dropping by, we'll be sure to update if anything crazy happens..Happy harvests everyone!! ❤️💡🌱😽💨 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

Feeding only molasses this week every other watering. Water phd at 6.5 buds still packing on weight. Just going to continue to watch trichromes till I get about 30% amber 70% milky while they deplete their nutrients. Thanks for stopping by. If ya like leave a 👍

Finally moved her to the new set up which is a 7 gallon square bucket with compartment lid which make verifying pH or topping up reservoir much easier. From here on she should explode with proper nutrients and care. GHL

1st Day of Flower 🌼 🌸 🌻 🌹

They all doin pretty good, leaves are a little too yellow for my liking at this point I should have added some grow to the mix but they will be fine I think. This one is a one of the shorter ones with fat buds. REMEMBER , IF YOUR SHOPPING FOR GEAR YOU CAN USE THE CODE “BANGDANG” FOR 10% OFF YOUR ENTIRE PURCHASE FROM ANY OF THE FOLLOWING COMPANIES. @greenbuzzliquids @rainscience_growbags @gorilla_grow_tent @growlightscience.led NEW* @Rocbudinc Seeds on his website * *****Gorilla grow tent discounts extend to all companies affiliated with grow strong industries which include..***** @super.closet Lotus Nutrients Kind LED grow lights

They had way too much mass so lollipopped about another 25% off the bottom. They are stretched way up into the lights so I had to modify the hangers to put the lights as high as possible. Did another major leaf strip just around day 18. Now at day 21 The buds are starting to form and looking okay. Next couple of weeks will tell if they will be close to successful or not. It’s the end of June and humidity stays around 70%. Not ideal conditions

Day 99: New Week We've decided against using additional nutrients and have completely stopped fertilizing. The light cycle has been reduced to 11 hours, and we're already starting to give them cooler water. Starting Monday, I will be watering with ice water to stress the plants further, aiming for higher yield, more terpenes, and increased frost. The adjustment to the light cycle should also help the plants ripen evenly. The lights are hanging about 20 cm above the buds, which are getting thicker every day, soaking up the light intensely. In about a week, most of the plants should be ready for harvest. We plan to stop watering them for about 100 hours before harvest. During this period, I'll place ice cubes on the soil to shock the roots one last time. 48 hours before harvest, I will turn off the lights, giving the plants two days of darkness. After this period, the plants will be cut and hung to dry.

420Fastbuds Week 6 What up, fam. Weekly update on the Photoperiod Femenized strains. GorillaMelon,RainbowMelon, LemonManderian,LemonPaya,PapayaSherbet, and some FastFlowering GG4/Sherbet. For just putting them outdoors 3 weeks ago, they've adjusted to the heat like a dream mid 90's and tripled in size. To think there's probably 4 more weeks of veg. These are going to get big. I might have to raise up the greenhouse or make it a convertible. I'm still just feeding well water, probably 2 liters, each straight from the hose daily. All in all Happy Growing.

Hey everyone ☺️. The bushes grow and grow 😃. I will start flowering next week, but before that I will topping it one last time 😊👍. I am very curious how it will stretch and develop in bloom. There will be a more detailed update next week. until then I wish you all the best, stay healthy 🙏🏻 and let it grow 🍀👌 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Will update with more when drying and trimming is complete. .

I welcome everyone who came in for the first time or has long been following my blueberries. the girl blossoms and smells and already showers herself with trichomes. two days ago I used iron chelate on a sheet to stimulate photosynthesis and also, due to phosphorus deficiency, introduced dry water-soluble fertilizer NPK 10/54/10

Buenos días, esta semana a la Moby 1 le realicé poda en ramas laterales ya que están creciendo muy bien igual que las apicales se ven muy bien sus hojitas en los apicales y como crecen la verdad pienso seguir con las podas,para en pocos días empezar a realizar esquejes en hidroponia de esta genética los cuales pondría a florar en exterior ya que estamos en otoño con días más cortos y se presta para que floren las plantas qué estén afuera... La Moby 2 von su poda Fim ya puede verse en el video que se están formando más de tres puntas siendo exitosa la técnica ya que le hice otras veces y va bien si bien necesita más sustrato se lo cambiaré en una semana o más ya que es un gasto que quiero retrasar pero va bien y esta con top veg y en estos días aparte agrego top underground para las raíces vienen muy bien...

For LIQUIDS & NUTES ******GREEN BUZZ NUTRIENTS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.

The growth cycle was pretty short, realizing that I planted it late in the year with the sun setting way sooner. Overall great experience

Yo wassup guys, starting little bit late the diary but this you cant miss flowering day 19 and they are crazy snow!

Getting there... cant wait for Spring Walls are up and painted, floor is laid, electrical all done, exhaust outlets mounted. Ive started to install the trim - I decided to put a grey stain instead of boring paint on the floor trim boards. Looks really solid against the dark bamboo floors. I used two gallons and two coats of flat pure white paint for walls and ceiling. Should give me a reflectivity somewhere around 80%. Some may ask why not opt for mylar? I just dont like the look. I dont care too much for reflectivity, as I will be well above the required watts/sqft with the light setup I will be using. I mounted an electrical receptacle in the ceiling, I thought it may come in handy for cord management. Im going to mount the 3 x meanwell drivers outside of the grow room and run some extra long cables to them. This is to keep heat out of the room, any little bit helps. Will be running a 8inch fan with about 750 CFM in order to properly vent the room. Intake will be a door vent and the negative pressure the fan provides. Odor is not too much of a concern, but may as well add a carbon filter. Tables to be built this week after trim is installed Week 1 Spend - $2080 Week 2 Spend - $350 (mostly on hardware store visits) Total so far - $2430