The Grow Awards 2026 🏆
Processing
Likes
Comments
Share
Growth was damn fast and high. She's up to 115 cm. Day 5 in Flower
Likes
29
Share
@Hashy
Follow
So the plant did well in the 9L airpots, and had a really good root structure. Out of this grow she was one of the largest out of the 4 plants. She didn't quite pull out the colours that this strain usually manages, but that's probably due to me not being able to lower the temperature. The harvest was quite an easy one and I didn't really get any fluffy buds as I had trimmed the lower part of the plant early on in the grow.
Processing
Likes
15
Share
Likes
68
Share
@Ferenc
Follow
Day 36, 22nd of October 2020: Hi there! All cool she is going crazy.... After the 2 videos the first pictures before topping. I have topped her 6x.... 6 branches and the rest pictures shows her after... pretty nice little lady thirsty and growing rapidly. I tried to do more LST also to spread the branches. Everything ontomues the same way fertilization and all the things. Happy Growing.
Likes
30
Share
@BC_Green
Follow
It has been another amazing week of the plants growing. I have been watching as the Fruity Freak leaves become progressively more fern-like, and ornamental as a result! Based on my Banizzle grows, I knew I needed to understand plant nutrients in a more meaningful way if I wanted these plants to thrive. So, I decided to get a soil test (see Ref. 1 below on how to perform a test) to understand what nutrients my plants needed. The report I received advised that I needed to add 200 lbs/acre of nitrogen, 150 lbs/acre of phosphorus, and 190 lbs/acre of potassium (see picture labeled Pic.1 (FYI you can't see these images unless you login to growdiaries)). I then researched what to do with my results (Ref. 2 helped), and I figured out that my nutrient needs of 200-150-190 fall close to a 2-1-2 ratio. I then looked at different types of organic fertilizers (see Ref. 3 and Ref. 4) and considered that I already had a 3-10-5 fertilizer (Vermibloom) on hand. I discovered Dr Earth’s Alfalfa Meal is 2-1-2 and includes beneficial bacteria and mycorrhizae (to promote healthy plant growth and disease resistance). However, I knew I would be low on nitrogen if I only used those two fertilizers. Therefore, I decided to buy some blood meal (12-0-0). I also liked that blood meal is more fast acting while the other two are more moderate. I hunted around for a solid fertilizer calculator and found an amazing tool from the University of Georgia Extension (Ref. 5). I entered all three fertilizers into the calculator, and it kicked out the exact amount of each fertilizer I needed to apply to 1 square foot (see Pic. 2). As I am using 10-gallon fabric pots (that can hold 1.5 cubic feet, but I put stone on the bottom and there’s space left at the top) I decided to use the one square foot application rate as I can always add more later, but I can’t take it away. Not only did I want to understand the nutrients I needed, but I also wanted to understand the structure of the soil (as it was not included in my test results). North Dakota State University has a nice page that discusses this (Ref. 6), and I performed a soil ribbon test (see Video 1) based on this information. I determined my soil to be medium textured (which is great), but I have seen occasional water pooling on the surface, suggesting that it may be more of a medium-fine. This means adding peat moss, coco coir, or other amendments might improve drainage (and plant hydration) and allow for roots to grow more easily. In the long run, I plan to use compost to enhance the soil structure and nutrients. I filled the bottom of my 10-gallon fabric pots with a ½” of pea stone to allow for drainage (Pic. 3). I then partially filled two 5-gallon buckets with topsoil from near where I will plant (but not in an area the roots will reach). I used a digital scale to measure the amount of fertilizers recommended by the calculator (Pic. 4, 5, and 6) and added it to one of the 5-gallon buckets (see Pic. 7). I mixed the fertilizers into the soil as evenly as possible (Pic. 8 and 9). I then poured a two-inch layer of non-fertilized soil, then peat moss, and then fertilized soil (in a roughly 2:1:1 ratio) and blended them together. I repeated this until the pot was full (getting additional soil as needed), and then I repeated the process for the other three pots. I set the filled fabric pots in my garage (Pic. 10) for two days to allow any upset bugs to flee into my garage instead of my house. I then moved the pots (wrapping them in a contractor garbage bag to prevent making a mess) into the room with the grow light. I placed a board on top of the fabric pots to insulate the plants (in their smaller pots) from the cold soil (Pic. 11). Once the soil in the fabric pots reaches room temperature, I will transplant. (Ref. 1) This video shows the method I used to take a soil sample. I didn’t have a field to test, so I took four samples from the area where I will eventually plant outdoors and blended them together. I then mailed my soil sample off to the lab, and about a week later, I received an email with a PDF of my results (included with my pictures this week). https://www.youtube.com/watch?v=N9AwxmFxBwg&t=8s (Ref. 2) This video from the University of Minnesota Extension (many universities have agriculture extensions that can assist you with soil testing and growing information for your area) discusses what to do with your soil testing results: https://youtu.be/HYrkcfE62Pg (Ref. 3) This is a nice article that discusses organic fertilizer solutions: https://www.grow-it-organically.com/npk-fertilizer.html (Ref. 4) This article lists the NPK values of many organic fertilizer solutions: https://www.epicgardening.com/organic-fertilizers/ (Ref. 5) Many websites tout a fertilizer calculator…but this one is hands down the best I have found. If you scroll down to the bottom, you can enter any fertilizer type you want (and the cost, if you want). It will give you the exact blend of multiple fertilizers to solve your nutrient deficiencies (I included a snapshot of the solution I used in my pictures). https://aesl.ces.uga.edu/soil/fertcalc/ (Ref. 6) This is an excellent article that discusses how to evaluate your soil: https://www.ndsu.edu/agriculture/extension/publications/evaluating-preparing-and-amending-lawn-and-garden-soil
Likes
20
Share
28/12/20. inicio de semana, 75 cm de altura hoy se aplico un nutriente foliar marca mexicana Rootz kelper son un extracto algas y azucarez y se aplico por riego giga grow. este contiene guano de murcielago sesacaron esquejes de ramas bajas todo organico. 30/12/20. hoy se rego con forzasilicia un fertilizante organico de una marca mexicana muy buena en mi pais se puso una estaca de madera para soporte 01/01/21. hoy se aplico un nutriente foliar marca mexicana Rootz💪 kelper son un extracto algas y azucarez y se aplico por riego giga grow. este contiene guano de murcielago 03/01/21. cierre de semana
Likes
12
Share
@Siriuz
Follow
She is loaded right now very heavy and potent yielding plant oh yeah thanks 420 fastbuds I will be getting more of your seeds you rock Guys im so happy I boughy fastbuds seeds It was great to see this second seed pop an amazing grapefruit we did fiming and she eneded up with many colas and many flowers plus super frosty and smelly Also turned purple all buds which to us was a surprise and did not expect that Since last grapefruit was different than this Thanks a lot for all your support Imagine if we had a full spectrum light I think we would be growing trees Honestly we have more than we expected COMING from an Indoor thats nearly located in a tropical climate of 30/33 degrees most of the year and with that said raising temps very hot sometimes very humid thats close to the equator So we have to use A/C all times and maintain humidity levels by spraying all walls to keep it around 45/60% while ac is on remember droping temps so we have to make it as comfortable as possible and that its not easy in this side of the world OR either you need a lot of money which I dont have yet to build a super setup and a separate ROOM with all of that temp and great humidity lvls so yeah we do what we can with our budget We live somwhere where things are pretty much fckd up but it is what it is Hey at least we are safe because it is illegal lol so yeah brothers we have hard times And still with all risk we here doing our best Showing all support Showing im greatful TO find a space like this where We all can share like and Comment And help each other grow better everyday Blessings to you all Keep EM buds coming Happy growing
Likes
62
Share
Hello and Welcome back 🌱 It‘s now 7 days ago since I put them in Water to Germinate and now it‘s their 5th day of growing. Yesterday, they got their first 4 hours of darkness and now i‘m slowly going down to 18/6 light schedule. I admit, the environment was sometimes very off due to experiments with VPD and leaf temperatur but I think I can dile it in correctly for this growing stage and beyond (hopefully). I was trying to see what happens if I stress them a little and hoped they would grow faster but they 100% didn‘t like it. They heat up pretty fast when the Air is too hot and dry because the roots are not developed and the plant is not established enough. An established plant can stay outside in the heat of the sun and still have cool leaves. So my environment for this stage is as above (27°C,70%RH). Light at 15000 Lux (≈370 ppfd) a little high but I‘ve noticed some stretching and I asumed they wanted more light and I really don’t want any more stretching. My media comes without nutriens so i feed little amounts of it every time they dry out enough. This is a Indica dominant strain so I asume they will stay fairly smal. Btw. If anybody wonders if CO2 bags work, check out the Video I uploaded. They are still seedlings (not really in Veg yet) and so i‘m treating them as such for the rest of the week. Root developement is now the top priority wich, if you didn‘t know, is better in a smal pot first because they are more likely to develope secondary roots but we’ll see. I heard It‘s like topping just underneath the plant. When they are ready to be transplanted I most likely will take the first three. Update: I did all the preperations for Transplant bc I was worried about root bound. I took Nr. 4 out and washed it as carefully as I could to expose the roots. Some of them got stuck on harder peaces of dirt and got ripped off. But it looks like alot of secondary roots developed instead of just one long taproot, wich is nice. I assume i can transplant them in the next few days. I rearanged the plants according to the Lux reading, wich is highest in the middle so the bigger plants (Nr.1 and Nr. 3) went to the sides. Maybe Nr.1 got the „smal“ genetics and it’s not anything environmental. thanks for following along this far and happy growing! Update: hey guys so yesterday I noticed, that the roots are coming out of the bottom. They were trying to get to the bottom of the three pots 😭 i had to do an emergency Transplant wich went very bad because they were stuck in the little pots. I don‘t think i‘m going to use these kind of pots anymore because they were not easy to get out. I even dropped Nr. 3 but luckily nothing bad happened. After the transplant both Nr. 1 and 2 were already ready to get more light. But Nr.3 was turning away from the light and the leaves were hanging down. So to lower the stress and encourage root groth I redusced the amount of light to a minimum and lowered the Temperature and highten the RH. This seemed to work well because the leaves were purking up again. The next day after 6-7 hours of darkness they are doing fine again but i‘m going to give them a little longer to establish themselves in the new pot. I changed the light schedule to 18/6 since I had to give them more darkness yesterday. I hope everything goes smothly from now on.
Likes
14
Share
Hey guy and gals, So, I was going to prune the girls tomorrow, but a mate dropped a half over, got stoned and decide, Bugger It!, so we hooked in today. I did take some after shots. Should have done 'before and after, but, I was STONED !' The girls look happier, more sprightly, less 'HEAVY'. Saved the biggest and best fan leaf for a mate. He is amazed at the leaf size. Then earlier today, when he dropped in ;-) , he had a look and near dropped. Big Bud has so many nodes, he was shocked. The FIMing/Topping, whichever I did has done amazing things. On a side note, I haven't grown heaps before, so this grow is amazing me. Previous grows got small buds, small amount, only just covering the cost of my setup (Hydro at the time and tent). I now have a BIGGER tent, am using SOIL and they are thriving. Personally, I think the water is the major factor, but also my 'dedication'. I check the girls 2-3, maybe 5 times a day (viewing port). Regular PH, moisture and such checks. I even put a sticky fly strip in there, as a bloody fly got in. This grow, besides the constant checking, I have Fim'd/Top'd, I have pruned them to promote growth. Basically, I have learned heaps, both from here and videos. I have re-read pretty much everything I read previously, tweaked a little and it seems to be working. Northern Lights is still a week or a bit more away from a prune, I think, then we will give them a couple more weeks and turn them to flower. I am aiming for a Late May/Mid June harvest, then a month in jars to cure. All going well, I will have a heap of and great choice, for my birthday in July :-D So, feel free to let me know how they look. Shoot through any advice. Hope you are enjoying my story :-) Have just uploaded some more photos, showing the girls, after their beauty treatment :-) All are looking fantastic, Hope you like the images. Just discovered Vipar Spectra have created a 1000W LED which uses a micro 100W to achieve this. The Vipar Spectra Pro Series P1000. I will be looking to buy myself one for my Birthday in July.
Likes
5
Share
I had some guests staying at the house so I had to move them under the patio for a week. Probably stunted their growth but 🤷‍♂️🏼. LSTing them into a spiral. Cheese has been easier since it’s much less bushy.
Likes
9
Share
So tomorrow will be day 1 of week 6. I have been out of town and not able to care for the girls like I usually do. So my PPM went a little higher than I usually have it. As you can see I have some nute burn going on. I dropped it down now and hopefully it should be smooth sailing from here. Girls are putting on some weight but really don't think I'll pull more then 3 oz per plant. All the buds are rock hard but a bit small. I do think that the quality is going to be above average. They are starting to pack on the crystals and crazy sticky. The smell at this stage is extremely strong. I had to hook my charcoal filter. My entire house was ranked when I came home from my trip. All in all these girls have been pretty easy to grow with the exception of one of the banner phenotypes. She really doesn't seem to like the higher PPM levels. But I have 1 Reservoir feeding all of them so she just has to make do LOL.
Likes
21
Share
@medigrow
Follow
Growing pretty fast a so many side branches ! Now starting pre flowering. So I add Bud candy nutrient.
Likes
8
Share
@MG2009
Follow
03/01/2022 You can tell which I put in flower room first, buds developing nicely 🙏🏻 Second one is a week behind but starting to flower have to raise the lights this week.
Likes
25
Share
Hey everyone 😃. This week she has done great 👍. It was done again on all the drifted topping and sprayed one last time with neem oil so that the last trips are finally gone 😁. We haven't had any pests for so many years and all of a sudden we have such little shit parts 😅. This week it was poured twice with 1.2 l of water. GHSC enhancer was added during a pouring (1 g per l) The tent was cleaned every day this week and the plants were checked for health. The humidifier is filled once a day. Next week I will decide how I will continue the training because I have space again in the flower tent 😀. This week I'll decide whether it goes straight into the flower tent or is pruned again. Until then, I wish you and your families a good start into the new year 2021 🙏🏻. Stay healthy and let it grow 🍀 You can buy this Strain at : www.Zamnesia.com Type: Purple Punch ☝️🏼 Genetics: Granddaddy Purple x Larry OG 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
1
Share
Likes
79
Share
Today is 3 weeks since Mexican Airlines broke out of the soil to become a seedling. She has really done a lot of cool growth in the time👍. I'm going to try changing up my training methods with this girl. First, I'm only doing one HST bend near the base of the stem (did this on Tuesday). Next, I'm going to try FIM'ing this time, instead of topping. GWE seemed to recommend a FIM pinch one a FIM cut, so that's what I did on Thursday. Last, I'm going to try LST again. If everything goes according to my evil plans, she should be my largest yield to date. 💪 Mexican Airlines is front-center in the group pics.
Likes
44
Share
The ladies are starting to fatten up and are looking great! Lots of long white hairs poking out, great stacking, and the smell is soooo loud. I’m having to run my exhaust 24/7 which has led to some cooler temps. I’m starting to see colour forming in two of the girls, but one in particular 😊 this strain should finish within 8-9 weeks, but others have gone longer to get more amber and couch lock out of the buds. Thanks for checking out my grow!
Likes
11
Share
@tangie
Follow
She's doing well as far as I'm concerned. Very late flowering, bud growth has almost stopped save for a couple smaller buds about the size of a plum each. Pistils are turning from pure white to bright orange with cognac tones. I like bright orange hair in my bud, so I'm happy with this. No less happy I am that I have apparently grown a significantly purple-ish plant, which would be my first time ever having access to purple-ish quality bud. I'm very excited to see how she turns out after curing!