Cruising along into pre-flower, 13" tall on 6/28 and looking healthy. Haven't needed much water with the rain, so onward we go.

The purple lemonade is getting some beautiful sticky fat dank buds and the gorilla cookies is flowering nicely the node spacing is super close so i will be looking at some super dence fat sticky buds the smell is amazing i cant wait to have a joint with the two strains combined in it .

I’m pretty sure the leaf issues I’ve been having is from the bonide neem follair spraying. Have not sprayed anymore. No longer having pest issues. Removed the gelato runt as it was not growing at a good rate. Using the space to take clones for keepers I might have.

Switch from germination dome to RDWC, th 4th september. Equipment: Idrolab 12 bucks Chiller teco Hy500 weather controler with Co2 : PRO-LEAF BECC-B2 Bavagreen 720w Bavagreen 720w Bavagreen 240w Bavagreen 240w Nutrients and PH controller: PRO-LEAF PHEC-B2 Nutrients: Green House feeding - powder feeding hybrids | Powder feeding boost System and roots care: Idrolab Total care

Banana Kush Auto has been growing great under the Medic Grow Mini Sun-2 in the Athena blended line nutrition. I lollipopped the plant, then defoliation was done since she was super bushy. I proceeded to lst the stretching branches outwards. Her solution was also topped off with a good dose of nutrition. She is doing great at the moment. Thank you Medic Grow, Athena, and Weed Seeds Express. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Merlin Mintz Autoflower is doing good. She had got her first lst, and selective defoliation today. Her root tips were pruned. She is looking good, and ready to go. Thank you Aeque Genetics, Athena, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Esta semana realizamos la tercera y última poda baja. Subimos la potencia de las luminarias Lazerlite Pro 720w by The Pure Factory al 100%. Conectamos a tope la extracción durante el foto periodo nocturno. Y conectamos el aire acondicionado durante el periodo diurno, cortando la extracción. Seguimos con los riegos según la tabla de JUJU Royal by BioBizz.

Thickening up nicely! Got some nutrient issues on the LSD, but not nearly as bad a previous grows.

Hello beautiful people! First week of flower. The girls are doing well. I had kind of a scare bcs one girl was showing some balls but most balls are shooting pistons, so my guess is that everything is going to be fine. Im doing 2 stage lollypopping and just did the first stage. Will do another session this weekend and be done with it. Its very clear this strains is more sativa leaning as we all know very well with Sour D. I have a very good feeling on this grow. Probably bcs i love Sour D so much. Rly curious in how this Zamnesia variant will perform. Thats it! Love & Peace 4 all!

Life is funny 😆, if you’re not learning something new every day, you’re not living! 4x4 update, one of the Yacht Party clones was struggling to keep up with the others, with this being the last harvest until fall, weight matters. I replaced the clone with a backup mother of my FX3# 3 which I’m very happy with! She seamlessly fitted right in with the canopy and will most definitely boost my weight goal. I’ve learned to only take my cuttings from the tops from now on, bottom branches will inevitably show a different size, less vigorous, and will not keep up with the growth rate from a clone from the top. 3x3 same issue with one of my FX3#2 clones, the clone taken from the bottom is half the size of its top clone sisters, she is healthy just a smaller version of the original mother. FX3#1 is shaping out nicely.

Bisher sieht es sehr gut aus, ich hoffe die Buds nehmen noch ein bisschen zu ^^ Aber ich denke mal schon.

Thank you so much Kannabia, for allowing me to grow a much wanted strain. And what a beast she turned out to be! HOLY!!! The buds are all giant grease balls, covered in frost! She smells very sweet, but while trimming some funk hints. No much, but kinda ripe smell maybe. I can't wait to try her, was a crazy sized harvest! Oh and she was only 2 gallon too. Im very glad I have more seeds of this mammoth! 😻😁🤘 Cheers

La Runtz tiene toques leves de color rosado supongo que de la Gelato, tenemos dos phenos que pinta. Muy bien farmers Pcg de momento nunca me a fallado!💪🏻

12/5 did some LST yesterday the first time I tried it she’s responding well I’m going to continue nutrients at half strength and that’s all for now 12/6 there are more bud sights on this than I’ve ever seen on any auto flower. I’m already seeing a lot of crystals in the leaves she’s responding well to the LST and I gave her a 1 mL per liter feeding of nutrients with 2 L of water I’m trying to be very careful. I have been using SF1000D lights I bought them a few years ago,they’re not bad they do get hot, especially when I’ve tried to put two of them in one tent it is very difficult to keep cool. Viparspectra I’ll keep it running at 80% and that should be good enough for one autoflower, I got the XS1500. I want to see if there’s any difference in the newer LEDs compared to my older Spider Farmer lights . I found a discount code in one of the discussions here in the site somewhere, and it actually worked it came to about 145 total. It’ll be here tomorrow. 12/7 💎💎💎 I love this seed company. This plant that I topped between three and four and did LST two days ago on is showing me bud sites that are fuller and more full of crystals that I’ve ever seen. this is my 10th Autoflower, my first one from this company and it’s completely different, way better, it’s just phenomenal. I like a clean and symmetrical and even grow. Doing this will make it much easier to process. I’ve never seen a plant grow like this. This is my first time trying LST and I’m glad I did it. It completely changes the plants you can definitely see there will be much more. 12/7 she looks great. because I spread the branches out the way I did, and only have one light on the leaf surface temperatures and the bud surface temperatures are all between 72 and 74° which is perfect. 12/8 Resin production is incredible. it looks like millions of tiny angels jizzed all over my plant it’s the most beautiful thing I’ve ever seen 12/8 I got the new Viparspectra light today. It has about 100 more LEDs in the SF 1000 D I’ll take some magnified pictures of the LEDs. The new one is much heavier I like the dimmer that way I don’t have to put in secondary lights for seedlings. It’s not a bad light I like being able to dim the light I ran it at 100% and the temperature was a little hot for me and I’m keeping it kind of close to the plant so I’ll probably lower it down to 75% and that should be good I think. Also I noticed that this one Viparspectra light looks to me brighter than 2 sf100d lights. 12/9 I turned the Viper spectra light down to a little bit less than 75% to bring it down to 100 W. When I did that the temperature stays around 95° on the board and about 98° on the driver, so it is far cooler and more efficient at the same wattage than the older spider farmer lights which were at 110 to 118°( about the same as the XS1500 at full power). So a single 150w xs1500 is about the same as 2 SF1000D lights as far as heat I'm sure the PPF or whatthehelleverthatis is higher ,very nice, If the SF1000D's would have had dimmers they would have been perfect. 12/10 awesome 🤩 12/11 I am seeing lots of resin production more than I’ve ever seen. I think this is so far been my best most successful grow this plant is great. I’m glad I found the seed company. The other ones I used before were pretty bad, I don't LOVE them at all. Also my Yamaha A4A 1600 receiver is total junk, I mean total... I'll never have the money to spend on something like that again, I was totally ripped off. Unrelated but so many formerly trustworthy companies are just TOTAL garbage

This is week 8 and week 4 flower! She's really starting to smell potent and sweet. This is my first ever plant

Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ______________ 📅 D50/B13 - 04/06/24 ⚗️ EC: 1.0 pH: 6.0 🌡️ T: 24°C H: 60% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D51/B14 - 05/06/24 ⚗️ EC: 1.0 pH: 6.0 🌡️ T: 25°C H: 60% 🌊 15L 🍗 CalMag, Bloom A-B, Bud Candy, B-52, Big Bud 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D52/B15 - 06/06/24 ⚗️ EC: 1.0 pH: 6.0 🌡️ T: 25°C H: 60% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D53/B16 - 07/06/24 ⚗️ EC: 1.0 pH: 6.1 🌡️ T: 25°C H: 80% 🌊 4L 🍗 CalMag, Bloom A-B, Bud Candy, B-52, Big Bud 💧 pH- 💼 Added pH- in order to keep the water on the lower side for a while 🧠 🚀 🎬 1 TL video ______________ 📅 D54/B17 - 08/06/24 ⚗️ EC: 1.0 pH: 6.1 🌡️ T: 25°C H: 80% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D55/B18 - 09/06/24 ⚗️ EC: 1.0 pH: 6.1 🌡️ T: 25°C H: 70% 🌊15L 🍗 CalMag, Bloom A-B, Big Bud 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D56/B19 - 10/06/24 ⚗️ EC: 1.0 pH: 6.1 🌡️ T: 25°C H: 70% 🌊 🍗 💼 🧠 🚀 🎬 1 TL video

Man sieht die Problematik jetzt deutlich das ich an den tabs sparen wollte

A memorable harvest. The buds are all very high quality and cleaning them was easy as the pruning I did did not produce any popcorn buds. The flavor is among the most intense I've ever tried and it's a plant that I would recommend to everyone.

Pineapple Express auto from Amsterdam marijuana seeds has germinated, and sprouted. Is looking great. I am unsure when roots will make it to the reservoir, but I would imagine it won't take long. 🤞 my mix is not too strong. First time around. Nothing new to report beyond that. She is being grow in a spider farmer 2.3x2.3x61 tent. With 4 inch inline smart controller extraction fan. Powered by a SE3000 which just got bumped to 45 percent yesterday. To purchase these items there is links below. Thank you again AMS, and Spider farmer. Thank you grow diaries community for the likes, follows, and subscriptions on my YouTube. I greatly appreciate the support, and happy growing 🌱🌱🌱 To purchase a SE3000 please follow appropriate link https://amzn.to/3jwCTO7 US：https://amzn.to/396hXXb CA：https://amzn.to/3ol4oK4 DE：https://amzn.to/3q15SJT UK：https://amzn.to/2L7NVKN AU：https://amzn.to/3pZD6ZQ FR：https://amzn.to/2Xkomsi IT：https://amzn.to/3nk7A7h Link for 3x3 tent: https://www.amazon.com/dp/B083K89FFJ Link for 4" inline fan: https://www.amazon.com/dp/B08S7BKS3Q Discount code on amazon: saveurcash

Harvest week for the Milky Way F1 growmies 🙌 Pretty happy with how she handled this cycle, recycled soil first time ever, dead of winter, undersized light for a 100x100 tent… she just kept going 💪 In previous runs I did scaled harvests, and every time I noticed a visible resin boost and even some anthocyanin production on some phenos, confirmed that a sudden light intensity increase late in flower does something interesting. This time I went a different route: last 6-7 days I stripped most of the non-resinous fan leaves and redirected a lateral bar onto the mid/lower zone to get the same effect. Curious if mechanical stress from defoliation plays a role here too, anyone know anything about jasmonic acid? 🤔 Late flower I pushed the setup to ~200w adding 660nm red bars at 40-50cm, which clearly tightened up the buds compared to previous runs 👀 Pulled the CO2 bottles in flower, without a way to measure it I’d rather focus on VPD and fresh air circulation 🤷 Kept them in veg where humidity tolerance is higher anyway. Now she’s drying and I can’t wait to see how the wet/dry ratio lands 🌿​​​​​​​​​​​​​​​​