🔥

First week for our banana purple punch 👊 from fastbuds 420 We are using the whole feeding schedule from Xpert Nutrients!! Lets see the results from this amazing nutrients!!! We are using 7 liter pots and doing some defoliation and lollipop the next weeks

OG 4Q24 Flower Week 4 (Plant Week 7) Orangegasm (Fem) [ IRIE Genetics ] 12/12 @ Bolt (Day 21) Germination: 20 November 2024 #3A Earliest Harvest Date: 9 February 2025 #3B Latest Harvest Date: 19 February 2025 _________________________________________ Start of Week: [Wed Jan 3, 2024 CR2 4Q24 22:F:4:1] End of Week: [Tue Jan 9, 2024 CR2 4Q24 28:F:1:7] OrangeGasm Fertigation: Max EC: [ 2.4, mS] _______________________________________ RLA Hydro - Auto Irrigation (RLA Primer A&B ONLY - No Silica Skin. While Silica Skin is largely Reservoir stable, One WILL NOTE a brown Patina on lines in a few days - eventually causing clogs across any irrigation small orifices. FEED Application - Dehumidifier Reclaim: (EC: 0.0, pH: ~7)  RLA Hydro Auto-Fertigation (1 Gal), EC: 2.4: - Primer A: [ 18, ml, gal] - Primer B: [ 18, ml, gal] - Mammoth-Silica: [ 4, ml, gal] - Photosynthesis Plus: [ 6, ml, gal] - Quillaja 60 Powder (Surfactant): [~scant~] Feed Application FILTERED TAP WATER, pH ADJUSTED: EC: [ 0.3, mS/cm], pH: 7 (Phosphoric Acid Amended) __  RLA Hydro Auto-Fertigation (1 Gal), EC: 2.4: - Primer A: [ 15.8, ml, gal] - Primer B: [ 15.8, ml, gal] - Mammoth-Silica: [ 4, ml, gal] - Photosynthesis Plus: [ 6, ml, gal] - Quillaja 60 Powder (Surfactant): [~scant~] Wed Jan 1, 2025 # Happy New Year!!! OG 4Q24 22:F:3:1 Runoff: 1 pt, ec: 2.0 - [x] Post Grow Diary - Week 5 Check Reservoir - [x] Rough Amount: [ 4, gal] - [x] Temp: [ 58, °F] Harvest Dehu: - [x] Amount: [ 5.7, l] 1. Count the Nodes (From TOP) 2. Remove Fan Leaves From Lowers ( 3 Nodes Defoliation: # Remove Each Plant From Tent - Defoliate, Replace - [x] Remove Large Stem FAN Leaves BELOW Canopy of Spread Flowers (Nodes 3-6) - [x] Remove Fans originating FROM and BETWEEN the TWO Stems of each plant, AT and BELOW Spread Flowers. (We NEED Airflow WITHIN Each Plant) The Rainbird XeriBird contains a FINE FILTER, which is largely clogged after a few runs. It seems to develop a film over the screen, that washes off/out with difficulty. Will replace Today. If Clogging Continues - I will REMOVE filter from XeriBird - and monitor the emitter lines. This is the biggest challenge right now - maintaining consistent fertigation. __ Thu Jan 2, 2025 OG 4Q24 23:F:3:2 - [x] How are the girls AFTER Wednesdays Defoliation? - Tbd - [x] Readjust Light Distance to 19.5”: Reset to ~20.5” to Tallest Stem. - [x] Consider raising to 77%: RAISED Harvest Dehu: - [x] Amount: [ 5, l] Runoff: - [x] Amount: [ 1, gal] - [x] EC: [ 2.4, mS/cm] Loaded Dehu in Res - Had to Augment with Filtered/pH Remediated Tap Water. EC: [ 2.5, mS/cm] REPLACED µFilter in Xeribird, washed and soaking in k. Vinegar. I Do Not Think we can run with this filter - It clogs DAILY. Need to evaluate long term    __ Fri Jan 3, 2025 OG 4Q24 24:F:3:3 Environment: - TempRange: [ 79, 82, °F] - RH: [ 64, %] - VPD: [ 1.0, kPa - Light Intensity: [ 770, µMol/m2/s] Xeribird Filter - The issue with the Xeribird is the micron filter pre-manifold. It has clogged on each of the past 3 days. - Creates a film that is DIFFICULT to remove - Have used Kombucha Vinegar & Phosphoric acid to soak. - Mechanical Cleaning (Nail scratching the surface of the screen) removes SOME of the brown build up. - Possible Causes: - RLA Silica Skin (Eliminated from Feed)? - Quillaja 60 Powder (Surfactant)? - Mammoth Silica? - Predicate between Primer A&B? We’ll eliminate ALL BUT Rooted Leaf Primer A&B, Microbelife Hydro Photosynthesis Plus, and SLF-100 (Enzymatic root cleaner). - If we’re clogged again at Lights On - Need to - [ ] Dump Tank - [ ] Clean Surfaces - [ ] Assure Pumps are CLEAN - [ ] Assure NO Precipitates in bottom of res. Harvest Dehu: - [x] Amount: [ 1, gal] @1900 Runoff: - [x] EC: [ 2.7, mS/cm] - [x] Amount: [ 1, gal] - [x] Replace Filter - Assess ‘Clog’ __ Sat Jan 4, 2025 OG 4Q24 25:F:3:4 EC: 2.7 LightDistance: 19” From Tallest Top - NOT INCREASING (We’re almost at the Vertical Limit of the Tent) Irrigation Maintenance: @1939: Cleaned Xeribird Filter. - Contains Orange/White coagulated Goo after 24 hrs - We’ve 30% ‘Clear’ - Will Monitor DAILY - Is the Orange from Primer B, Photosynthesis Plus, Silica Skin, or NATIVE Orange Yuck?   If we have LESS than 100% Clog after 24 Hours, Continue to monitor CHANGE IN AMOUNT of precipitates in filter. (Perhaps weigh the filter pre-cleaning. @1900 Runoff - [x] Amount: [ 0.5, gal] - [x] EC: [ 2.7, mS/cm] - [x] Replace Filter - Assess ‘Clog’ __ Sun Jan 5, 2025 OG 4Q24 26:F:3:5 Dehumidifier Reclaim - 1.6 Gal, 2.7 EC - Refreshed Reservoir - PrimerA&B: [ 30.5, ml] - Photosynthesis Plus: [ 9, ml] - SLF-100: [ 7.5, ml] Runoff - [x] Amount: [ 0.25, gal] - [x] EC: [ 2.7, mS] - [x] Inspect/Clean Xeribird Filter We’ve got about 1/3 to 1/2 the Crud of Yesterday. 
Feeding only RLA Primer A&B, Photosynthesis Plus, and SLF-100     Measure Light Intensity - [x] Tops: [ 510, µMol/m2/s] - [x] Main Canopy: [ 730 , µMol/m2/s] Stretched ANOTHER 2” overnight AM NOT CHANGING LIGHT Distance - In Fact, Raising Dimmer to just more than 3 o’clock. __ Mon Jan 6, 2025 OG 4Q24 27:F:3:6 INPUT EC: 2.7 PPFD TOPS: [ 844, µMol/m2/s], DLI: [ 36.4, mol/m2/s] PPFD Main Canopy: [ 585, µMol/m2/s], DLI: [ 25.3, mol/m2/s]  Objective: Optimal Light - Keep Dimmer @ 92% - AFTER STRETCH Reduce Light Distance 2 clicks/ day until TOPS are At ore Below 4” from Light Light Distance - Stretchers: [ 15 ,in], - The Rest: [ 25, in] Measure Light Intensity - [x] Tops: [ 510, µMol/m2/s] - [x] Main Canopy: [ 730 , µMol/m2/s] - [x] Runoff - [x] Amount: [ 0.25, gal] - [x] EC: [ 3.0 , mS/cm] - [x] Runoff Delta: [ tbd, mS/cm]
- If at ANY POINT we BREACH 0.4 mS/cm - Increase Watering DURATION ~20% - [x] Check and clean Xeribird Filter (As Needed)
- Similar or Less residue to YESTERDAY. Reclaim Dehu - [x] Amount: [ 1, gal]
 Refresh Res: - [x] 1 Gal, EC: 2.7 Primer A&B: [ 20, ml] SLF-100: [ 5, ml] Bypassing Photosynthesis Plus to see if that’s the cause of the precipitate/film in the irrigation filter daily. __ Tue Jan 7, 2025 OG 4Q24 28:F:3:7 INPUT EC: 2.7 Tallest: 32.5” Shortest: 20” Light Distance: 14” To Tallest (Lowered 3 Clicks @ 92% Dimmer) Runoff - [x] Amount: [ 0.33, gal] - [x] EC: [ 3.2 , mS/cm] - [x] Runoff Delta: [ 0.6, mS/cm] # CAUTION LEVEL - Increased Fertigation Duration 5 Seconds - Watered about 2 minutes extra. - Need to bring Runoff Delta to ≤ 0.4, mS/cm Reclaim Dehu - [x] Amount: [ 0, L] Defoliation: - [x] Remove LARGE FANS Covering SMALLER PLANTS

Week 13 in the garden, and it's been a week of contemplation and admiration. Despite my initial plan to flip the plants, I decided to give them another week in vegetation. It's like I'm sculpting a masterpiece, carefully grooming the plants into a perfect botanical sculpture. Working with my plants feels like art – it requires skill, love, dedication, and a sense of playing God. As I look at the tent, I can't help but feel a sense of pride and joy. These green beauties are turning out amazing, and I'm filled with overwhelming happiness whenever I get the chance to speak to people about them and show them off. But the time has come to take the next step in their journey. They're being flipped this week for sure, ready to embark on the next chapter of their growth. It's bittersweet, but I know it's all part of the magical process of growing these wonderful plants. Here's to Week 13 – a week of artistry, joy, and the promise of new beginnings. 🌿🎨

MIMOSA by ROYAL QUEEN SEEDS Week#11 Overall Week #10 Veg This week she's doing good dealing with the heat and the other elements being outside. Stay Growing!!

2 Pheno still in veg living da solo cup life

hey guys so here is ty f.b.t 3 girl coming along real nice . Got a little wind curl on one leaf finger but nothing worry about . IVe started to reuse my Aircon unit waste water running it through my r/o water system and adding my 5ml each of calcium and magnesium supplements to each 3 gallon bucket produced . all good so far til next week 😀

Eccoci ragazzi pronti per farvi vedere una buiva settimana! La ragazza nel. Giro di 7 giorni ha raddoppiato il. Volume! Oggi ho cambiato l. Acqua dopo 20 giorni, ora farò fare al max altri 10 di vegetativa e spero mandare in fioritura, spero davvero che la sorella in questo poco tempo cresca abbastanza da poterla mandare a fiorire assieme, se no sarò costretto ridurre le ore di luce, ma cmq ad aspettare.. Speriamo che proceda tutto come deve andare, per ora ho fatto topping 4 volte vediamo se in un prossimo futurosato costretto a farlo di nuovo per tenerla più bassa possibile rispetto all altra... Ok continuate a seguirmi spero vi piaccia il mio nuovo progetto e ci vediamo alla prossima settimana! Un buon 420 a tutti! 🌱🌿🍀🤞🙏💪😸❤️

meh

Bonjour à tous les padawans et maîtres jedis Si vous voulez des buds d'apparence bien givré et "gras" c'est ici les gars. Les trichomes sont bien laiteux et certains sont ambrés je fini mon rinçage et je procéde à la récolte bientôt Les bourgeons sont bien purples ils sont vraiment beaux un vrai plaisir à les voir mûrirs Je me languis la récolte

_____ Week 12 | Day 85 - 92 | 5th week blooming 💮 ______ Day 85 🌞 oh yes... the smell when I open the tent becomes more and more intense. The buds also look more and more frosty... I think the extra side light pays off, where normally there is little or no light, the buds look just as frosty as the top colas. I hope you can see that well in the pictures... unfortunately I don't have much space to take good pictures of the pages... Only LPH 2 & 3 can be seen well from the front. Amnesia Haze: Amnesia, as expected, is much slower in development than LPH and Biscotti. Number 1 looks a bit wilder and scruffy than 2 and 3. Also from the development 2 and 3 are further and form already diligent trichomes Biscotti: both biscottis look identical, same pheno I think. development is very good and already looks very frosty Lemon Power Haze: LPH 2 & 3 look identical, with number 3 looking frostier and furthest along in terms of development. LPH number 1 looks totally different, the buds look quite small, and it also looks different. I have to think about something for watering. I love my plants but watering 8 pieces in such a small space is no fun hehe. At the moment I water them manually via a small water pump, the whole thing is very fast but I still have to dislocate myself every time to get to the back plants. this is not the yellow from the egg :D For the next grow, the plants have to be higher and I'm thinking of an automatic water supply. Actually, watering my plants calms me down when I do it with the watering can, but under different conditions...Possibly also fewer plants but more training. When the tent is empty again, I start to implement my plans. I'm also thinking about growing 1 or 2 plants in a DWC system. Whether I make something myself or buy something ready-made is not yet clear. If you have any tips, feel free to write to me. Day 86 🌞💧 - Today was feeding time again, as announced again after the 3rd day. I mixed a little more than 25 liters and provided each plant with ~3 liters Day 89 🌞💧 - Three days are over again and the plants are hungry again. 3 liter each Plant, small drain. ____________________________________________________________________________________________ Light - 12/12 h - 560 Watt - 2x 200 Watt Toplight - 4 x 40 Watt Lightbars PPFD - 900 - 1000 µmol Temp. avg. - 22,1° Hum. avg. - 56,3 % RLH

Day 112!!! The girl looks amazing, I started giving the girl clean 6.3 ph water without any nutrients "washing" her smell is very strong, I can smell her from afar:) I think next week could be the harvest week:) good luck to everyone;)

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

LIMETTA MARMALADE by JOLLY POND FARM (Cotton Candy Kush / Mimosa) x (Koffee Cake / SkyCuddle Kush F3) Bred by @landrace_bureau Hunted/Selected/S1 by Jolly Pond Farm @jollypondfarm jollypondfarmacy.com Sativa Flowering Time: 68-73 Days ~~~~~ 1/14/2025 res were all swapped yesterday except for #3 , roots barely reaching through, still top watering, as soon as i see its 5 finger leafset, i'll switch to veg nutes. VPD @ 0.9kpa ish DLI @ 30 ~ ~~~~~ 1/21/25 i have noticed that the limetta marmalade are a litttle more sensitive to light at this stage than most of what i am rocking, but that could be because i've gave them a little light to begin , so i can't say for certain. however everything is looking good. Follow me on Instagram @growmoregaas & Twitter @growmoregas

Sanlight EVO 3-60 at 80% Day 64: Looks great😎 starting to Check the trichomes👌🏻 watered with rain water and 3 ml/l AlgaBloom, 1 ml/l CalMag, 2 ml/l Hesi Boost, 1 ml/l Pure Zym and 1 ml/l Green Sensation 👌🏻 pH at 6.4 👍🏻 Day 67: Looks good 🤗 watered with rain water and CalMag 👌🏻 Day 70: Looking good 👍🏻 watered with rain water and CalMag 👌🏻 trichomes are 60% cloudy 👌🏻 maybe two weeks from now

She’s doing very well right now! I have been removing some small leaves from underneath, one or two at a time. Unsure when she is going to need flushing!

Hello everyone, The girls are finally outside in 20 gallon fabric pots. This season I have a greenhouse for them and I hope it goes good. Still have to build the first cages around them and start stretching them. 🎊🎉 finally, summer is here 🎉🎊 See you guys next week 🤞🤞🤘🤘👊👊👊

We are one week before x-mas and hopefully i do the right thing to continue the grow with Elsa. She would never looking good again, but we Both can Go together Hand in Hand to her harvest day . The Next 3 days we will celebrate Christmas 🎅🏻