Likes
Comments
Share
Muy buenas familia aquí una semana más mostrando el progreso de mis niñas este último riego le he puesto de todo siempre le pongo el mínimo de la tabla como lo ven? Hago bien o le pongo un poco más según se experiencia que me dirían? La verdad que yo veo que están avanzando bien están agarrando buena estructura los cogollos buen color y buen olor 😁 el foco esta a 30 cm de la punta mas alta esto está bien? Las otras puntas son un poco más bajas la humedad sigue igual la temperatura tambien 25° en algún momento llega a los 26 pero no siempre extractor e infractor funcionando al 100% un ventilador que mueve el aire pH de agua de riego en 6.3 y el de salida de la tierra igual la EC de entrada y de salida perfecta en el siguiente riego que lo haré sólo con agua y atazyme tomaré foto de las medidas de PH Y EC bueno familia en 7 días vuelvo por aquí espero sus comentarios que tengan buena semana paz familia
Likes
50
Share
March 15th We are entering Week 2 The hardest Part is done. Seedslings have established, and seem to feel Good Working on next Leafset I spray them daily with " Fast Plants Spray, and water them if they need it I was setting up this Tent new and they got a new Light too. Iam very happy with the Light Its a bright, good quality Quantumboard The corpus is built solid, and has cooling fins, so the Board and the Tent stays quite cool No issues It runs on 60 Percent The Light was released on March, 15th. here are some codes Amazon US: XS1000 10% off: it10mlarimar http://yx-8.cn/0y-6 XS1500 5% off: it15mlarimar http://yx-8.cn/0yA XS2000 5% off: it20mlarimar http://yx-8.cn/0y2Y XS4000 5% off: it40mlarimar http://yx-8.cn/0y5k Amazon Canada XS1000 10% off: it10mlarimar https://amzn.to/38udUVe XS1500 5% off: it15mlarimar https://amzn.to/3esVUyr XS2000 5% off: it20mlarimar https://amzn.to/3l5zAfg XS4000 5% off: it40mlarimar https://amzn.to/3l7k5Uj
Likes
7
Share
Pues ya se van formando algunas flores llenas de pistilos!! Y vaya olores que desprende a sus 23 dias a 12/12 horas de luz. Le habierto un poco las ramas inferiores para que le entre mas luz!
Likes
19
Share
Harvested a little early. But about 70% milky and some clear and dark. I have it drying now. About 50% humidity but it goes up and down. 181 grams from 3 plants in my 4X4 with a TSW2000. I didn't expect to get that much on my first try. This sour joker x sour ghost is the real deal. It's not hell's OG unreal but it's a nice smoke and gets me rocked.
Likes
25
Share
She's crowning nicely and so far, she has been extremely easy to grow... This is my second divine seed that i've grown, and I really loved the first one, so i'm hoping and expecting big things here... As always, thank you two divine seeds for throwing such an awesome contest.. I'm definitely going to give her ice water.The last couple weeks to try to bring the colors out.. I look forward to that.. I hope everyone is doing well.God bless and happy growing ✌️
Likes
27
Share
Watering with small amounts about every other day. Removed the first node and lower foliage. The plant is starting to throw pistils at the end of week 3 😀
Likes
20
Share
Last week. 9 weeks have pass now 48h of darkeness and then chop chop..
Likes
27
Share
New Aeroponics "root rain" mist cloner! Holds 2 gallons of water. I added 8 Tsp of CloneX clone/seedling nutrient. PH was 6.0-6.5ish, good enough! These clones inside got zapped pretty hard one day, because I forgot to plug in the water pump one time after playing with it hehehe... Some didn't make it, but most survived! every other plant was watered with just de-chlorinated tap water, for re-hydration. #4 has been selected as the winning pheno! The mother plant had her home upgraded to a 2gal pot. The root ball was not so bound, due to her receiving a root-prune not too long ago, she was re-potted back into a solo cup. I pruned the bottom of the root mass off with a light pinch, and potted her into her new 2gallon home!
Likes
17
Share
@Sativa763
Follow
Day 70 after switch. its going to end soon I think. 65 - 70 days recomended by breeder. Maybe I will just not water again and let her slowly die 😱 she looks good - beatutifull almost - although I inspected a problem at one of the buds... more in my question that I will create. bigger leafs are getting soaked out of nutritions and start to get yellow. probably the last time you see her alive. I try to recap a little bit of the veg. phase in the upcoming week to get the diary a more "complete" look 😎 Also I will update you as soon as I got this in the glasses. thanks for your participation on my way with ralph wigum from root riot seeds (almicanna)👌
Likes
9
Share
@Kushizlez
Follow
Black Garlic #1 Yield: 53.6 Smell: 8/10 - gassy, piney, earthy, skunky Bag appeal: 7/10 - slightly leafy/stemy Crystal coverage: 7.5/10 - very impressed Ash: 8/10 - thick, uniform white ash Fire holding: 7.510 - stays lit for 45+ sec Smoke: 7.5/10 - taste is good until the end High: 7/10 - sativa dom Comment: looks nice, smells nice, tastes nice, burns great but quite leafy. 52.5/70 = 75% 👍🔥 Black Garlic #2 Yield: 42.3 Smell: 7/10 - woody, earthy, tea Bag appeal: 6.5/10 - slightly leafy/stemy Crystal coverage: 7/10 - impressed Ash: 6/10 - flaky, mostly white/grey Fire holding: 4/10 - stays lit for 10-30 seconds Smoke: 6/10 - taste is decent, needs curing High: 8/10 - sativa dom Comment: looks nice, smells nice, tastes nice, burns like shit. 44.5/70 = 63% 👎🗑️
Likes
5
Share
@Ninjabuds
Follow
My gas tax plant is looking absolutely incredible right now. It's got these massive buds that are super dense and have this awesome dark color to the leaves. I'm so excited to see how it turns out when it's finally ready to be harvested. I've been checking the height, the thickness of the stem, and the density of the buds to get an idea of how much longer I have to wait. I think I might start flushing it soon. The past few weeks have been so beautiful, watching the plants grow and change. It's amazing how something so small and fragile can turn into something so strong and vibrant. Now that they're getting ready to bloom, it feels a little bittersweet. I'm so excited to see the finished product, but I'll definitely miss having them around while they're growing.
Likes
18
Share
And it starts like this. an official collaboration starts with the friends of Zamnesia, from today I will only grow, grow and flower Zamnesia Seeds plants and I really like it. We are close to a flowering in the extreme heat and therefore we opted to start with 4 very fast F1s, they are not joking guys when they tell you that they are made to be more resistant, stable and fast they are not telling you something false. The girls are super fast, even those from other brands tried in the past are excellent and a sliver and this one from Zamnesia have all it takes to be the best autoflowering on the market. The Watermelon Candy F1 were also born at the speed of light, 18 hours in water, 24 on land and we were already born, both of us. Oh yes, a lot of research is being done on autoflowering plants, you have all noticed monstrous improvements compared to Low Rider and subsequent derivatives. Whoever works best wins and from what I have been able to see so far Zamnesia is working very well. I know, there is a group of sceptics, friends I'm here on purpose, give me a couple of months and we'll see. Zamnesia is the best online shop in the situation, you can find everything from seeds, to mushroom kits, through vaporizers and a thousand other things https://www.zamnesia.io Watermelon Candy F1 seeds specifically https://www.zamnesia.com/10666-zamnesia-seeds-watermelon-candy-f1-automatic.html Site Description ZAMNESIA SEEDS - WATERMELON CANDY F1 HYBRID AUTOMATIC: BUDS BURSTING WITH FLAVOR If you've been looking for a flavorful strain with superb genetics that's effortless to cultivate, the hunt is over. Thanks to reliable F1 hybrid genetics, Watermelon Candy F1 Automatic showcases the highest degree of productivity and efficiency. This strain takes everything you know and love about the original, and packages it in a plant with even greater potential. GROWING WATERMELON CANDY F1 HYBRID AUTOMATIC Derived from Watermelon, Candy Kush, and ruderalis, Watermelon Candy F1 Automatic is a finely tuned medley of genetics. This cultivar is fast to flourish and reliable to grow, no matter where you choose to grow. Taking just 9–10 weeks from germination to harvest, she provides a uniform growing experience culminating in a huge haul of buds for her size. Reaching heights of 65–80cm, Watermelon Candy F1 Automatic stays pretty grounded, making her perfect for smaller growing areas where space is a commodity. It also means you can fit more plants in if you have the room! Once ready to yield, growers will see a return of 400–450g/m² indoors and up to 100g/plant outdoors. Moreover, Watermelon Candy F1 Automatic is highly resistant to pests and disease, making it an ideal strain for newcomers and fans of low-maintenance cultivation. AROMAS, FLAVORS, AND EFFECTS OF WATERMELON CANDY F1 HYBRID AUTOMATIC If we haven't already sold you on the power of F1 hybrid genetics, the proof is in the pudding. Watermelon Candy F1 Automatic is teeming with terpenes and cannabinoids, making for a lively high coupled with huge flavors. Just one hit is all it takes to sample rich fruitiness mixed with sweet candies and a slight earthiness to back it up. And with an average THC content of 23%, the effects are euphoric at the start but settle into deep relaxation soon after. Whether you're chilling alone or with friends, Watermelon Candy F1 Automatic will see you right.
Likes
22
Share
Vamos que os explico un poco critical es una variedad indica con una floración rápida, sus flores son compactas , y bastante resinosas, tiene aromas fuertes. El ambiente en el secado estuvo en 23 grados de media y 40% de humedad se pasaron rápido al bote de cristal, 7 días en concreto. Hasta aquí todo familia, espero que os agrade un saludo y buenos humos💨💨💨
Likes
14
Share
The harvest was super sticky. I mean fr it was frustrating but we got though it lol. It’s took a week to harvest all the plants with some help too. They all started drying at the same time but each one got cut at different days. Overall they all stink to high hell. I mean super stinky like damn what is that funk at stink. Lol they taste just as they smell and curing will only make them better. I also found some nanners on one of my plants smh ONLY DOWN SIDE
Likes
4
Share
Starting to hit preflower! ✌️🏼
Likes
26
Share
@Gzuscamp
Follow
This is my first hydro grow and first time with clones. I have a few semi successful outdoor grows under my belt but the weather (hot AF) and caterpillar apocalypse (lost a beast of a plant and the tops of most others) last year are forcing me inside. Reservoir is an hdx 27 gallon tote with 15 gallons of actual water capacity about 1/4” under net pots. Attached to 1/4 hp active aqua chiller (overkill but got a deal and am in so cal; last years consistent 100+ temps ravaged my outdoor grow and can even make indoor temp regulation difficult) with two 5” and one 4” air stones in main res and one 4” in a 5 gallon top off res (not part of the system until/if I need it) attached to two 15L/minute active aqua air pumps. I wanted to have a bit of a barrier between the ambient temps inside the tent (rest of the room is a/c controlled) and the actual reservoir so I built a base to set the tent sans bottom putting the top of the res at the floor of the tent. This also raises the reservoir off the ground and hoping it will save some back aches once scrog comes into play. This also frees up 16” of vertical space inside tent and although I intend to scrog it should help as a buffer with temps and I won’t have to worry about light distance since plants are at floor level. To keep as much unnecessary heat out of the 4x2 tent the spider farmer light ballast was removed and relocated to outside the tent which I’m glad because during testing the ballast and light are each producing 120 degrees. Half of that is outside the tent allowing the temps inside the tent to stay about around when room temp is about 78 (a/c off but weather is fluctuating) with a small fan at base level and a 6” clip on fan for higher up. Reservoir will be 66-68 at all times thanks to the chiller. For ph management I am going to be using a torus hydro perfect ph (35 gallon). I’m hoping their claims aren’t just hype because they say it removes H+ and OH- ions to allow the ph to maintain 5.8 - 6.2 ph (without any additional buffers). This small fluctuation allows all nutrients to be taken in while a stagnant ph will prevent certain nutrient uptake hence a more complete usage. These are claims among others they made, let’s see if the science is legit. Unfortunately this being my first hydro grow I have no standard to base this off, but if I don’t have to worry about my ph that’s one less worry. Nutrients will be GH flora trio and cal-mag plus hydroguard. Not sure about additional additives, want to keep it pretty basic but suggestions for this nute/strain combo would be appreciated. I was intending on growing wedding cake or venom og but cake was sold out and venom didn’t look great so I ended up coming home with two gelato clones from universal nurseries. I’ve always liked this strain but wanted the cake because I’ve read it’s highly resilient. What I was not expecting was that these would be rooted in neoprene. I’m new to hydro and aside from the research and reading throughout my grows I usually overlooked neoprene. I guess it could be better than the rock wool as it shouldn’t leach and mess with ph? They are surrounded by hydroton and will be hand watered until roots make it to water. Update day 6: I went against my better judgment and initially painted my lid for light leakage. Ended up dumping my entire reservoir two days in because it was full of paint chips (even though it was formulated for plastic it still chipped off in high volume). Used a drill pump from HD, worked well as the intake is a 1/4” pvc tube I could suck up the paint chips and the water, but DO NOT USE to transfer anything but waste water as the output contained grease from the pump! Got a new lid and will just be using panda film for light blockage. Added a small humidifier because rh was in the 30-40 range, now temps and rh are consistently 70 degrees and about 65%. Nutes are 1/4 strength except calimag due likely to stoned math... Plants don’t seem to be minding so I’m not trying to sweat it much. Slight upward drift in ppm and ec as water is taken in or evaporates and ph is slowly swinging in the range torus hydro said it would so that is a success as I have not used any buffers. They claim it is more effective when it can directly interact with a root mass so it seems promising. New growth sprouting all over but no roots have made it out of the net pots. I went with 6” hoping roots will branch laterally exposing move root mass to the air gap once developed. Started noticing slight yellowing of leaves day 4 and some drooping (due to low rh as they perked up after adding humidifier) so I went from 50ml top feed daily to 100ml, also turned light down to 15% and everyone is happy.
Likes
13
Share
Last days for most of them - only Strawberry Cough will stay longer - she is super hungry and I can not keep up with feeding her - most of leaves are yellow now. 😱 The rest - four plants will be harvested on the weekend - 2-3 days from now and frozen - I'll be making bubble hash and fresh frozen live resin from them in the following weeks 😈 Trichomes are mostly milky with some amber starting - ideal ripeness and time to freeze those glands
Likes
163
Share
She's a bad mama jamma.. WEEDSEEDEXPRESS great job .. All left is to smoke her ..in about 4-5 wks...lolol