We have two rainbows from b.s.f.seeds and one san Fernando valley, the oldest of the rainbow is on week 5 day 35 under 250 watts and the other is on day 28 week 4 and 150 watts hps , p.h. 5.5

I'm now on vacation for 2 weeks so all photos will be from my security camera. From what I can tell my new clones are greening up and putting out some new growth. My blumats had a runaway on day 3... luckily my neighbor was around and was able to slow the drip rate down on my one plant which was starting to flood my box. It has now stopped dripping and my hope is there will be no more hiccups..I will be watching closely over my vacation. 😅🙏

ULH2: Still growing buds AH1: Strated branching ^^ Bent the plant a little AH2: Transplant to 25l Tex Pot with Canna Terra Pro

The tip from a friend to use the Bio Enhancer has absolutely paid off. The plants grow excellently and really soak up the nutrients from the soil. It will soon be time to start flowering, as the plants should not get too big. Added some more LST Clips, unfortunately we broke up 2 braches from the rainbow. She is a very sensitive girl tho.

Really happy with plant growing White Russians next

Just a little longer neeeds one more flush then i am happy Day 72 Cookies Gelato is close but patience is a virtue Day 73 tomorrow darkness for cookies Gelato Also want to thank everybody for the comments likes etc you know who you all are 👍🏻😍👍🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Fully marshydro supported Setup: Marshydro GT100X100X180 Marshydro Ts 1000 LED lamp soil :Plagron batmix Nutrients :Advanced Nutrients Advanced Nutrients pH Perfect Bloom Advanced Nutrients pH Perfect grow Advanced Nutrients pH Perfect micro Advanced Nutrients B-52 Advanced Nutrients Voodoo Juice Advanced Nutrients Rhino Skin Advanced Nutrients Big bud Advanced Nutrients Bud candy Advanced Nutrients Overdrive Advanced Nutrients flawless finish Advanced Nutrients Sensizym BioBizz - Calmag Some handy info about the marshydro TS-1000 Increase Yield&Crop Quality in Led Grow Newest SMD Led technology provides the highest Par/Lumen output, makes you get 30% higher yield compare old led lights, can get up to 2.5g/watt yied. High Efficiency Energy Saving Plant Light Only 150 watts true output with so you don't have to check your light bill every month 😎 342 pcs LEDs, more scientifically and energy-efficient! Perfect for 3'x3' (100x100cm) veg stage and 2'x2' (60x60cm) bloom stage, higher intensity in a Mars Hydro grow tent. Sunlike Full Spectrum Led Indoor Growing Infinite close to natural sunlight, suit for all plants whole satge indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. High Reflective&Noise Free Fanless Led Grow System Quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants to receive more energy and without burning your plants for maximum headroom

*Week 1 Seedling/Veg - 09/25* So far so good, Mimosa one had a little slip with her first set but has since recovered accordingly and is filling out nicely. High Temp 82-85 - High Humidity 90 - 94% *Week 1 - Veg 09/28 update* 2 of the 3 seeds failed due to user error - currently only running girl, she is coming along nicely. Transplanted into a small container using coco. * Week 1 (Early Veg) update - 09/30* Thus far all is moving accordingly - Added some light myco to the coco and running in prop dome at 91% humidity and 81 degrees in temps. Light watering until the final transplant

Jelly cak3 I can’t wait. She smells dank and look great. I can’t wait. Jelly cak3 smells more like fruity cak3. I smell grape I smell berries I smell cherries I can’t wait jelly cak3

swelling up nicely. pics out off the tent are from the last day off week 5. day 35 of flower

Encantado de la oportunidad de crecer estás variedades, sin duda, llenaron todas mis espectativas 🍀😍🤩

D57 FD 7 : Elle continue de bien grandir. La phase de stretch commence. les pistils augmentent en taille et densité. Je commence le BioBloom et le TopMax à 1 ml/L D60 FD10 : Juste de l'eau et rien que de l'eau claire

Week 8 - 05/03 - 05/10 Light - 400 W HPS & 265 W LED Temperature - 76 +/-2 Humidity - 55 +/-5 D1 Flower - This week will be the transition week for the ladies, each day reducing the light schedule by an hr. It worked pretty well last time so hopefully, this batch follows suit. I will change the MH bulb to an HPS midweek, along with switching on the bloom switch for the LED light. Added the Scrog net and ended up defoliating and cleaning up the underside a little bit. D4 Flower - Watered with nutrients and switched to an HPS bulb D7 Flower - Plants are doing great, nod spacing is nice and stacked. The transition eased the plants into flower, they are down to 12 on 12 off.

Does it look like it's growing?😋 Counted veg week from surface.

Day 70-77 (Day 71) Not exactly sure why but node spacing on bbb 6&7 is super tight still. Their stems are also harder and less bendy, almost like they’re root bound. Bbb #5 in my veg tent is looking bizarre and I’m at a loss for what to do. I’ve been looking up and asking around about the leaf crinkle and no one seems to know what’s wrong. Trashing a pheno of this would hurt. It could be a keeper too as I don’t think the problem is genetic. It’s definitely root bound but that doesn’t cause contorted new growth like that. I’ve concluded that it’s my dense soil coupled with root bound issues, overwatering and high RH. (Day 72) Later tonight I’m going to give bbb 5 a bath tub flush until it’s reading 200ppms, drain it well and then transplant into a 3g pot with lightly amended soil. I’m also going to give it a light defoliation. I don’t mind stressing the shit out of this plant right now because I won’t be flipping for another week at least. With the small container it will run out of amended nutes mid flower so I will hit it with a few synthetic feedings around then to test out the smokabilty and taste compared to organic nutrients. I might as well give the rest a good defoliation on the rest of the plants too. I will try to get most of what is under the trellis. (Day 73) I definitely defoliated #7 waaay too much. Since it’s tucked away in the corner and a really bushy plant I can’t train it as well as the others. I cut most of the sucker branches and the majority of the lower fans. This should prevent the need to defoliate at all until week 3 of flower. (Day 74) I’ve been reading that higher temperatures with a high RH can affect growth big time. It could be what’s causing all the crinkling and twisting. And now that the plants are in very late veg they could probably benefit from a lower RH. When I was running my temps around 74-78F and 70% RH I was in the perfect range. Now that I’m around 82-86F with the same 70% RH that could be what’s causing it. Hotter air holds more moisture than cooler air and proper vpd at 84F is around 75-80%. I’m going to turn up the speed on my carbon filter and set my controller to 75%. If I don’t see a difference or it gets worse I will drop to 65 and go from there. (Day 76) I finally got the lights raised up another 4 inches or so. It’s not much but it should help reduce the intensity and stretch the nodes more. I’m starting to think the super tight node spacing and droopy/contorted growth has more to do with something I’ve been reading about called ‘soil compaction’. Apparently farmers often deal with compacted soil in fields from running tractors over it all day. When I potted the plants I gave them a good little jiggle to compact the soil down further so I could fit a bit more in the container. I think this could be the culprit as they don’t seem to be drying out evenly. Even the plants in my other room are not drying out like they should and it’s probably from compacting too. With the addition of rock dust and dry amendments the soil can become sandy/clay like and retain a lot more moisture. Wish I would have added a few more liters of perlite and packed the soil a bit looser. Either way I need to get this problem sorted ASAP before I get root rot. Earlier in the season when I overwatered, I stuck a fish tank air pump into the soil and it aerated the soil enough to prevent overwatering. The only reason I discontinued it is because it didn’t have much effect in the 1.7g pots. I just ordered a 36w 6 way fish tank pump that is way more powerful. It was 50 bucks and I’m willing to take a gamble on it. It seems to be my only option at the moment because I can’t just repot. Worst case scenario I can use it for brewing compost teas if it doesn’t work. I’m not sure how well this will work in a giant fabric pot but it’s worth a shot. I’ve heard of people supplementing additional air into raised garden beds with great results. I’m picking off some of the new auxiliary branches to try and widen the node spacing. Growth is definitely slow and stunted but no signs of deficiencies. I just thought of another theory on the node spacing... and the more I think about it, the more I think it’s the mystery problem. I’ve been foliar spraying with 1-1-1 VeloKelp at pretty high concentrations 2-3 times per week. I have heard in passing that kelp and seaweed can somehow reduce stretch. A quick google search reveals that Ascophyllum Nodosum Seaweed and other marine algae extracts contain large amounts of hormones and auxins that reduce plant height and stretch. *facepalm* Guess I’ll stop that for the rest of the cycle. As far as I know there is nothing I can really do but wait for the plant to use up all those excess hormones and nutes. The recent 0-0-15 seaweed extract and 1-0-3 kelp meal I bought is derived from the same kind as the velokelp. I guess I won’t use it again until week 3 or 4 in flower. Tight nodes are very useful in flower but aren’t desirable at all in when trying to scrog in veg. Especially when they’re like a half inch apart. It slows the shit out of a grow. Vietnamese and biker gangs in my area used to grow SOG style and use a synthetic PGR hormone (meant for bonsai trees) called ‘paclobutrazol’ that would make the weed rock hard dense so they wouldn’t have to pay people as much to trim it. I’ve heard that in recent years they have made the switch to using kelp extracts because paclo is getting harder find and is not meant for food crops let alone smokeable crops. I’m ashamed of it but I have smoked pounds of PGR weed long before I knew what a PGR was. 🤷‍♂️ (Day 77) One more theory. Ever since raising up the plants up onto that shelf the root zone is probably significantly warmer and the bottom of the pot (where most of the roots are) drys out way quicker. It’s possible that the warmer root zone could not be holding dissolved oxygen at the proper rate resulting in that over/underwatered look. Or it could be that I’m not watering enough at once to reach the bottom of the pot where the roots are and it’s indeed under watered. I’m going to water in a gallon when I get my new air pump and see if that makes any positive change. If I see the new air pump making a difference, I will flip on the 21st of April. If I don’t see a difference, I will carefully untangle the plants from the scrog net and remove the shelf. That extra foot should make a massive difference with ppfd and will cool down the roots significantly too. I’m thinking about grabbing a simple soil/compost thermometer to check the temp of the medium. Better safe than sorry. Rough week. Hopefully everything get smoothed out in the next little while before I flip.

Not much to do with Autos. I take a handful of leaves everytime I'm in the tent. Veg thru 2-3 weeks of flower.

This one is for breeding i will cross her with skunk.

This two were part of another diary and got moved out due to space reasons at VW8 and moved back indoors at VW20 https://growdiaries.com/diaries/218151-auto-god-s-glue-grow-journal-by-yan402 13.09.25 VW21 Both are looking good and are developing tighter nodes than when they were outside, I'm going to have to keep cutting them back every once and a while I also applied nematodes against thrips and fungus gnats. 20.09.25 VW22 some spots and some yellow leafs, I think it's a root problem, probably root bound, but both seem healthy and are getting thicker so maybe just top up with Coco coir and give a slight different nutrient schedule less Tri Part Bloom could do the trick MAYBE lol. 27.09.25 VW23 Topped up the pots with extra coco coir and trimmed the side roots a bit, both plants were root bound 📹 03.10.25 VW23 did a HST/LST session 📹 12.10.25 VW25 Done a major HST session to try and keep them in line with the Sunset Sherbet GF I have going in the same tent, rest in the video 📹 17.10.25 VW25 ffj/fpj/fish 30 → 60 ml 19.10.25 VW26 it just became a one plant diary, keeping #5, #6 gets it's own diary for testing nutrients. 20.10.25 VW26(?) Feed tweak: added 3 g Calcium Nitrate/ 30 L (≈ 15 ppm N + 10 ppm Ca) 24.10.25 VW26 did a defoliation and trimming session 📹 25.10.25 VW26 I'll be repoting tomorrow, 26.10.25 VW27 rest in the video📹 27.10.25 VW27 Epsom Salt 0 → 2.5, Calcium Nitrate 3 → 9 g 01.11.25 VW28 CalMag 60 → 30ml, TriPartBloom 20 → 30ml, Magnesium 2.5 → 3.5g 04.11.25 VW28 no more yellowing between the veins and no new spots, the changes to the schedule worked, rest in the video 📸 09.11.25 VW29 Did what I'm hoping is a last cleanup 🎥 12.11.25 VW13 Did another cleanup in the tent 🎥, also switched to the FERMAKOR PK Micro schedule, (10.11.25) added Phosphoric acid as a pH down in preparation for flowering 14.11.25 FW1 FERMAKOR PK Micros 40 → 50 ml 22.11.25 FW2 Calcium Nitrate 40 g → 35 g 05.12.25 FW3 about 2 weeks ago Calcium Nitrate 35 g → 25 g, FERMAKOR PK Micros 50 ml → 60 ml 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 06.12.25 FW3 – Fed 5l of #1 → 2l runoff (*RUNOFF reused for indoor house plants) 💧💦💧💦💧💦💧💦 🌱 Nutrients in 30 L #1 Veg – FERMAKOR 💧💦💧💦💧💦💧💦 Calcium Nitrate (Calcinit / Nitcal): 45 → 40 g → 35 g → 25 g = 1.50 g/L → 1.33 g/L → 1.17 g/L → 0.83 g/L = 207 ppm N / 253 ppm Ca → 184 / 225 → 161 / 197 → 115 / 141 PK Concentrate (FERMAKOR Base): 30 → 40 ml → 50 ml → 60 ml = 1.00 → 1.33 ml/L → 1.67 ml/L → 2.00 ml/L → balanced 1:1 P:K + light micros (from extract) Home-made FFJ/FPJ (Fish + Veg): 30 ml = 1.00 ml/L Epsom Salt (MgSO₄·7H₂O): 8 g = 0.27 g/L → ~26 ppm Mg + ~35 ppm S Fetrilon Combi 1 (Micros): 0.5 g = 0.017 g/L → Fe 0.7 ppm · Mn 0.7 ppm · Zn 0.3 ppm · Cu 0.3 ppm · B 0.1 ppm · Mo 0.02 ppm Phosphoric Acid (pH down) + Citric Acid (chelation): as needed → First set pH with phosphoric acid, then add a little citric only if you want extra chelation Target pH: 5.8 – 6.0 (drop test yellow-green) 📦 TOTAL: Liquids: 60 → 70 → 80 → 90 ml per 30 L = 2.00 → 2.33 → 2.67 → 3.00 ml/L Solids (CaNO₃ + Epsom + Fetrilon): 53.5 → 48.5 → 43.5 → 33.5 g per 30 L = 1.78 → 1.62 → 1.45 → 1.12 g/L 💧💦💧💦💧💦💧💦 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ Tools & equipment ✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ✂️⚙️✂️⚙️✂️⚙️⚙️✂️⚙️✂️⚙️✂️⚙️ 🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 🦄Fantasy Feast ( Seeds)🦄 🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 Species: Hybrid (Regular) Genetics: The mother is Unicorn Whip by Dirty Bird Genetics. The father is Charcuterie by Cannarado Genetics. Effect: Unknown Mixed effect body and head high Flavor: Some phenos are Skunky gassy fruity, some are fruity sour citrus with a chemical touch and a touch of skunk Flowering: Estimated 8–10 weeks Resistance: Strong — Testing phase done YouTube Link: https://youtube.com/-m8h?si=A7x4Zlr2kj-_ga31

A breez to grow 450 grams off 5 plants first ever grow red buds throughout the whole grow