14 dias floração

22 days of Flower done, all pots have stabilised except the Small Ghost, I don't think it is genetically 'Small' as it's cut is just as vigorous as the other clones. Never recovered as quickly from the lockout as the others I suppose. Now, I will start slowly increasing E/C . How high I go for each plant? We shall find out together. I have begun to lolly-pop the plants, a process I will continue to do right up to flush, If its gonna be larf it's coming off! These plants are a lot taller than I had planned, the lockout and full recovery took longer than I expected, + days lost due to a quest for new coco. It will only cost me time in the end, and with big root systems only feeding 1 .77 sq ft of canopy after thinning, bending etc. It should not hurt my yield. I also realise there will probably be a large, 4 or so week window for these plants finishing, I can open up the space a bit then to help finish late bloomers. (I have a UVB lamp at the ready, to Speed it up at the end.( In more ways than one?) After more bending I will add some doses of silicone over a few days. Help repair the branches that I have Crush Bent. The silicone also toughens up the plants against Insect attack. When using Silicone I dilute before use to prevent precipitation of elements. Day 24 - Maltezerz This plant is most advanced into flower, plenty of resin being produced. Smell is forest fruits and berries first, then Afghan Hash with a distinct chocolate finish. If it keeps a similar flavour profile to the end and has the promised hit of THC, Wow. Orangesicle. This plant is a lot more stretchy than French Cookie parent. (Tangie influence) The smell is powerful and a distinct Orange but a bit on the sharp synthetic side of the profile. Probably change and mellow with maturity. Blue Sherbalato, Tons of resin with a distinct sharp citrus sherbet smell. GTH 1, The smell is complex 'Dirty Lemon floor polish' then Diesel, then underneath a musty mushroom type smell. Not unpleasant, but not that inviting. GTH 2 and 3 Clean fresh lemon scent very pleasant and lifting. GTH 4 This is also dominated by a lemon scent, but different, Sticky Sweet Lemon, like Drizzle Cake, an oily thick heavy lemon aroma. Scotts OG. This is weird, in the morning this plant smells like a custard slice, by lights out, the smell has a tinge of sour milk or yogurt to it . No hint of the Ginger and Spice of the grow phase stem rub! This plant is quite slow out of the blocks and stretched as much as the GTH's. No real resin production up to now. Wedding Cake. Beautiful complex aroma. It smells like a Panattone with a touch of Black Hash underneath. Different to the US cut I have grew before, which was high yielding and very potent but lacked much aroma at any stage.

Zoap is coming along amazingly! She shoots up at least 1 inch each night. I will be placing zoap in a 7gal later today. My soil mix is potting soil basic shit that has little to no nutes in it. Then I mix 1tbs per gal of 4-4-4 Gaia green all purpose and 1 tbs of power bloom Till next week gromies have a fantastic day and best of luck ✌️ 07/10/23

The ladies were flushed on the 68th and will be flushed again on the 71st. Analyzing the resin with a magnifying glass, I think we will not have a harvest before the 75th. B3 this blooming I think she will be looked after with more than 80 or 83 days.

The generous use of fertiliser in the last few weeks has done wonders for these plants. 🌱🔥 We’re now entering a stage where I’m quite happy for them to start using up the nutrients stored in their remaining leaves. I won’t stop adding fertiliser just yet, but I’ll reduce it to once a week. Since they’ve already progressed quite far, I’m not too worried about signs of deficiencies at this stage — it’s all part of the natural fade. Looking forward to harvest in two to three weeks! 😎✨ Stats so far: 💧 Watering: 1.5L every other day 💦 Humidity: ~55% RH 🌡️ Temp (lights on): 22–26°C 🌡️ Temp (lights off): 20–22°C 📈 Avg. VPD (lights on): ~1.45 kPa

Everything seems to be going great for them to all be random bag seeds! Temp is staying a little higher than I would like trying to figure out some ways to cool it down may just order some new lights!

Plantitas sanitas...

~ FASTBUDS TESTER #2206 ~ Well friends, here we go on another 'canna-venture' together! The grow room has had a complete remodel and some upgrades done to it including brand spanking new 4x8 and 4x4 tents and a Trolmaster Hydro X controller along with a new Control Panel. This tester strain is one of six tester strains that FastBuds has graciously provided me with and I'm looking forward to seeing what this girl has to offer when she's grown to her full potential! One drawback of 'testers' is I have little to no information on it other than its number and that it's an autoflower... 🤪 But, it's ALWAYS a blast growing them for me because not knowing a lot allows me to just concentrate on the essentials: Light, Environment, Water, Nutrients and possibly a bit of LST... not complicated, just basics like keeping a constant temperature and RH in the tent at a level that gives a good VPD, watering when almost dry and maintaining proper light levels according to their stage of growth. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~THE SETUP~ ~Initially seeds were lightly scuffed, then soaked for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Vivosun Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged. ~Planted into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph. ~Once roots emerge from the Jiffy Pellet they're transferred to their fabric pots. ~Grown 100% organic in a 4g Gronest fabric pot and a 3g fabric pot by Wraxly filled with Mother Earth 70/30 Coco/Perlite medium and initially amended with Dr. Earth 4-4-4 / Earthworm Castings / Dr. Earth Flower Girl 3-9-4 and Coast of Maine Stonington Blend Organic Plant Food 5-2-4. ~19/5 light cycle for the entire run with supplemental UVA added during flower. Lights are controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. ~Top dressing every 3-4 weeks with slow release dry amendments and Earthworm castings. ~Straight water ph'd @ 6.2-6.8 when needed and bi-weekly Compost Tea's. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 12/15- Here we go into the second week of veg for the FastBuds Tester #2206 girls and they're on a roll! When I checked on them today they both were still moist so I let them go until I check them tomorrow. Basically at this point in the run all I have to do is make sure they don't dry out, fill the humidifier and watch them grow! 12/17- Yesterday I watered them both and increased the amount to roughly 0.25g each of de-chlorinated water with 3ml/g of Botanicare Silica Blast (added to begin to help strengthen their branches) and then ph'd to 6.4 @ 74℉. I've also increased the output of the HLG 650R's to 35% which equates to about 230w at the wall which, of course has raised the temp's in the tent so I've also begun to run the A/C unit in the grow room which is keeping the temp's now at 75℉ in the tent. The RH is running around 75-78% RH giving a VPD of .67-.74 which I'll take! 😁👍 Other than what I've mentioned above, all I did was fill the humidifier with distilled water and watched my girls grow! 🤩 12/19- Today I watered them each with 0.25g of de-chlorinated water to which I added 3ml/g Fish Head Farms Fish Sh!t and 1 tsp/g Unsulfured Molasses which I then ph'd to 6.3 @ 74℉. I'm now watering through the bottom, filling the drip pan and letting the plant draw up the water into itself. I am also watering from the top, but only just enough to moisten the medium. They're really starting to take off now, a sure sign their roots are beginning to get well developed. Their 4th set of leaves have emerged and I'm thinking over topping them in the next day or so. 12/21- Well, yesterday I went ahead and topped the #1 Tester #2206 taking off the 5th leaf set. Hopefully she won't stress out over this and starts shooting out those secondary branches. I left the #2 alone as she's not quite as tall as the #1. I may not top the #2 as a sort of comparison to see how each grows out. Today I watered them both with 0.25g of straight de-chlorinated water each which was ph'd to 6.3 @ 74℉. I gave about 3/4 of it into their drip pans so they can draw it up into their medium, the rest I applied to the top of their medium just to moisten it. Well there's two weeks of veg behind us now, Week Three of vegetation is beginning and they should really start to take off! 😍👍 😎💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow Strong! 💪😎🤙

Week 2 -All 3 plants look really healthy -light is dimmed to 40w -the Mimosa x caught up and is now also looking good -very happy with the growth this week -humidity dropped to about 65% because the vent is now running 24/7 -you can already smell a bit wich surprised me ;) will probably give it another week and then start 12/12 or what do you think? Happy for any comment! :)

So this week we have a heatwave witht 30 degrees celcius,looking good so far except the smallest one. she is a week or so younger but stays fairly small,but looks healthy. cheers!

Well we have hit day 16 and that was a tough ride to say the least learning all the time .The light was to close had her at 22" inches but 34 " was the sweet spot as you can see she recovered quickly . Besides that I've been giving her nutrients and a foiler spray and am excited to see her next week , thanks for checking in canna family ...

She is growing very nice did some last and defoliation because she was very bushy. Next week she will start flowering .

Day 64. All is good, one Mimoza ( off course biggest ) didn't liked new house ... Maybe after this one she will bounce back. The rest of the girls are going, think it's 10 days max left for two smallest plant in a week few more will be ready, the rest - around the floor .... Too croudy, no love, hope extra lightning will hurry them up, . I'll have Mars SP3000 soon to add. Gave full feed today, other two waterings will be plain water. Some selective defoliation here and there ... Day 69. Second day after few girls went outdoors. I need more light, but I will get it in a week only. Happy Growing !!!

10/10 indoor grow, highly resistant strain, quick to flower after only 5 weeks of veg... light stress being too close to the lights caused fox tailing buds...live and learn!

Did some cleaning up of undergrowth and discovered some weird symptom on the lower growth that was removed. I have done some research but have not found anything. Any help is appreciated. Other than that everything is looking good. Taking longer than I expected but otherwise happy with the way things are going. I believe I am having some circulation issues due to poor design of my rdwc set up. The plant furthest from the reservoir is showing some stress. I am in the process of designing a new setup that will definitely circulate better.

A peg from a tent, nailed a plant laid on a shovel to the ground marking the victory of man over nature the former gum has set the next floor in a plane to the previous one. As a result, we have 4 floors practically in a single plane. I removed the first two sheets and two thirds of the leading escape of the 2nd pair, I plan in this position to release up the main trunk