Likes
Comments
Share
@GrowinSho
Follow
Had some issues with the tray2grow (operator error) but I figured it out. They should be completely healthy next week.
Likes
2
Share
Plants seemed close to finish so i defoliated on day 52. The plants went through shock. I will not be doing this again Attempting Generative steering, i dropped humidity and allow the pots to dry out more. Watering every 2 days by hand
Likes
57
Share
Well guys! home stretch! as you can see in the photo, harvest day is not far away)) Both plants look amazing! the structure of the Buds, trichomes, smell, stickiness and oiliness, all this is in excess!)) Buds are very solid and elastic .. very happy ..
Processing
Likes
3
Share
Not using any Nutrients for the first week
Processing
Likes
11
Share
A partir de esta semana se agrega a la alimentación bac boost y top candy.
Likes
8
Share
@Lazuli
Follow
I made a mistake by defoliating this strain too heavy. I made a diary of a clone From this plant that i also Now started flowering so if u want to see better results go look at it
Processing
Likes
1
Share
So This week was the same as the last really, It seems all I have to do is sit back and watch these ladies do their thing! Ive not gone full on with the bloom supplements or PK yet as only 2/5 of the GG are seriously flowering. The other 3/5 GG are now Finally showing some signs of flower and some tops are starting to build and lowers producing more pistils each day! The Stardawgs continue to explode, even some friends who were sceptical about the performance of the Quantum board LED's have been flow away by the results. All of the buds seem to be building dramatically top to bottom which no shortage of frost! Macro shots on the way!!
Likes
20
Share
@GR0WER
Follow
New week starts! 🌞05.12.2022 This day began with smell rising. I think flowering starts. There's a few pestels in every knot (but not on a top). Watered my girls with nutrients without 'Roots' stimulator. I should stop to give it a long time ago, I hope it gave no harm. Soon when the odour will become too intensive I'll turn my filters on. It will be very noizy, that's why I want to do this as late as possible. 🌞06.12.2022 'SeaWeed' spraying today. I changed distance to lamps. Now it's 40sm. Temperature didn't rise, so it's OK. Upd: I made some LST on evening. It's a last training for them, I guess. 🌞07.12.2022 Pre-flowering stage started! I turned on third 100W lamp. Now it's 300W total. Fed my girls with GHE pre-flowering nutrients complect. Sprayed with 'SeaWeed', as usual. 🌞08.12.2022 Today I came home from my job to see both girls increased in their high dramatically, +5cm in 24hrs. Maybe it's because of feeding, maybe lights, maybe auto flowers act like this, I don't know. But I saw larger distance between knots there. I was forced to do one more LST procedure (result is on photo). Also, I sprayed my 'BPPa's' with 'SeaWeed' (as usual) and moved pots closer to each other to place them in a gaps between three lamps of mine. I'll feed them tomorrow. 🌞09.12.2022 Today I noticed brown tips on the my babies leaves. #1 has alot of it and #2 kinda few. I considered to water them with 'GHE Clean' solution one time, next time I'll give them half of a nutrients dose. Smell gets stronger. Tomorrow I'll turn my main ventilator with two carbon filters I have from the previous grow. 🌞10.12.2022 Yesterday I flushed my plants with 'GHE Cleen' solution 2ml/l. Today I do nothing. Tomorrow I'll give them 75% from previous feed formula. 🌞11.12.2022 I putted small amount of sulfur in an upper layer of substrate, ~10g/m². Watered my plants with 75% from 'pre flowering' GHE recommendation. Sprayed leaves with 'SeaWeed'. Week ends.
Likes
14
Share
Likes
15
Share
6/12 - 6/18 👉👊 ------------------- 6/14 AM - (G)(Y) 1 Gal. 6.7. Cal-Mag 2.5. Micro 3, Gro 0 Bloom 5 *Forgot to jump to 6*, Easy Weed .25 tsp 6/14 - (Y)(G) are sharing 1 Optic XL. The other plant is under it's own Optic XL. *Lazy training! They got too big.* 6/16 AM - (Y) 1 Gal 6.7 pH Cal-Mag 2.5, Micro 3, Gro 0, Bloom 6, TErp 6, Recharge .5 6/16 PM - (G) (Y) 1 Gal 6.8 pH 2.5 Cal-Mag+, 3 Micro, 0 Gro, 6 Bloom, 3 Fish Shit *Yes, (Y) 2 gallons in a 24 hr period! 6/18 - (Y) 1 Gal. pH 6.7. 2.5 Cal-Mag+, 3 Micro, 0 Gro, 6 Bloom, .25 tsp Easy Weed ------------------------- Green Clips - No Terpenez (G) Yellow Clips - Using Terpenez (Y) ------------------------- 3 Gallon Fabric Pots 40% FoxFarm Happy Frog 40% Cana-Coco 20% Perlite ------------------------- Veg & Bloom Tent: 2’x4’x5’ Green Architecture Tent 600D 2’x4’x5’ CoolGrows Tent 600D Optic 1 54w COB 3500K (Seedling, Early Veg) 18/6 Optic 1 XL100w COB 3500k (Late Veg, Bloom) 18/6 Optic 1 XL100w COB 3500k Dimming (Late Veg, Bloom) 18/6 1 Gal Humidifier 2x 6” Clip Fan 2x 28” Oscillating Fan 2x 4” Carbon Filter with 2x 200 CFM
Likes
4
Share
Hola a todos!! Esta semana prácticamente no he fertilizado, ya que luego de un breve lavado note que los valores de ppm aun seguían siendo alto..(1700...1800), entonces segui regando solo con agua, con bajas ppm 500 ppm aprox. Recien ayer logre bajar las ppm , no asi el ph, del drenaje, me viene dando 7.2, pero a pesar de todos estos inconvenientes, a la planta se la ve engordando los cogollos.En esta semana se estiro 1.5 cms solamente, pero los cogollos están creciendo de buena manera. El lavado lo hice el día 44 con 7 litros de agua con ph 6 y ppm 500, luego de un buen rato de drenaje medi y en ese entonces parecían haberse corregidos, pero al siguiente riego dia 46( lo hice con 2lts de agua) me volvió a dar valores altos. Para no generar un mal ambiente para la planta, la deja descansar 2 días, y ayer (dia48) volvi a regar y al fin las ppm han bajado a 900, el ph aun sigue dando alto, pero como mencione antes la planta demuestra que cualquier inexperto la puede cultivar, porque se aguanta todo ese stress😅😅 . Aun no sé distingue sus sabores, pero sus hojas ya se están cargando de resina..
Likes
11
Share
@Coughy
Follow
Good stretch this week, I haven’t lollipopped at all, not even in veg. It’s fairly leafy everywhere and I want to get in there and defoliate bottom 1/3 soon. A lot of dead leaves I imagine, just been so busy and been neglecting the grow. Funny, how when you first start out and you’re overly micro-managing and then as the months go by, it starts to become a chore. I ordered a light from China, a Meijiu (HLG)550 V3. HLG Canada didn’t want to give me a decent discount so, unfortunately had to ship my money outside the country. Saved 50% for a quality light though. Might take a bit to get here, been processing in Hong Kong for 4 days. So far the leaves are healthy but last run they started to turn deficient after the stretch. In my defence, with the last grow, I was just starting on the dry nutrient regimen and made mistakes. Hopefully it stays healthy throughout bloom cycle with new changes and knowledge. New reservoir this week as follows: Partial drain, most of it gone, but 100mL RO added and; 40 gram cal nit 30 jacks 30 mag sulph. 100mL mighty bloom enhancer 100mL head masta 300 mL h2o2 25 mL Fulvic 40mL Humic pH ended up high with addition of bloom enhancer, added pH down to 5.8. PPM 1360. Wednesday-Day 10 Added water and some nutes. PPM 1200 pH 6.0 Started a small section of lower 1/3 defoliation Day 11 Did some more defoliation, added a video to show progress. Day 12 Finished lollipop on right plant. Moved some branches around. Added 20 liters and 20g cal nit, 10g of both jacks and magnesium sulphate.
Likes
265
Share
Week 2: The adjustment Hello dear growers and groweresses, it’s time for an update on my grow. My plants have completed the second week and have continued to grow. But they also faced some challenges that I will tell you about. The adjustment My plants have adapted to the new conditions in my room this week. I realized that I had my lamps too close to the plants and that they got too much light and heat. This resulted in them not developing as well as I had hoped. I therefore hung my lamps higher and reduced the intensity of the light. I lowered the PPFD (Photosynthetic Photon Flux Density) from 400 to 280, to give the plants a more comfortable environment. The PPFD is a measure of the amount of light that the plants receive per square meter and second. The higher the PPFD, the more light the plants get, but also the more nutrients and water they need. The plants accepted the change very well and recovered quickly. They started to grow stronger again and formed more leaves. They also got a nicer color and look healthier. One plant that suffered a lot was the Frosty Nightmare. She was overwatered and had trouble developing. She was smaller and weaker than the others and had yellow tips on the leaves. I therefore gave her less water and moved her away from the other plants, to give her more space and air. She recovered and grew again. She is still the smallest of all, but she has potential. I also increased the temperature in my room by 1 degree, to give the plants more heat. I set the temperature from 22 to 23 degrees Celsius, which is still in the optimal range for the plants. The plants liked that and showed me that by their growth. I let them vote democratically, by observing the plants and interpreting their reactions. :D The water filter I also want to introduce you to my water filter from Watertrim, which I use for my grow. It is a great product that saves me a lot of time and money and is also better for the environment. The water filter has only two connections: an inlet and an outlet. So it has no waste water, which would otherwise go into the drain. It has different options of the filter, depending on how much water you want to filter and how high the EC value of the tap water is. The EC value is a measure of the electrical conductivity of the water, which depends on the dissolved minerals. The higher the EC value, the more minerals are in the water, which are not always good for the plants. My filter filters at an inlet EC of 1.0 1000 liters, before it needs to be renewed. Since my tap water has an EC of 0.5, I can filter 2000 liters with it, until I have to renew it. That costs about 100 euros and works easily and quickly via the post. The flow is almost 1 to 1 in speed, so no more waiting. I can tap the water directly from the filter and use it for my grow. I use the filter as follows: I tap water at the filter. I pour normal tap water on it, until I have an EC of 0.3. I add fertilizers etc., depending on what the plants need. I check the EC again and adjust it if necessary. I also adjust the pH value, which should be between 6.2 and 6.5, to ensure optimal nutrient uptake. I give the water to my plants. The water filter is really a great product, even if it is not very cheap in the purchase with once of 240 - 390 euros. But it pays off in the long run, as it saves me a lot of work and costs and also improves the quality of my water. u can find it here : https://watertrim.de The outlook I am very satisfied with the result of the second week. My plants have adapted well and recovered from the problems. They have grown further and formed more leaves. They have recovered well and showed a great growth. I am very excited about the next week, where it goes to the repotting and the ladies can try fertilizer for the first time. I will fertilize this run only a little late, even if I use osmosis water this time. The soil from BioBizz is really great and can carry the first weeks well alone. I look forward to your visits and the next weeks. I will continue to provide you with information and photos and let you participate in my grow. I wish you a nice day and a good grow! 😊
Likes
10
Share
Likes
7
Share
Still only giving water at ph6.5. I will put them in 4 litre pots soon.
Likes
15
Share
Man kann schon die Terps riechen, wenn man die Trichome berührt
Processing
Likes
27
Share
@Piquillo
Follow
Second week went good. The only issue is humidity goes up quite a bit when lights are off. I'll just add more wind to prevent further issues. What do you guys think? Also, I noticed some top leaves clawing and growing thin, like tacoing upside down. Still long weeks ahead, we'll see how it goes ;) 😅 😄 Thank you and happy growing!
Likes
9
Share
Plants loved their new home from last week.....the crown of one plant got broken off while I was deal with something else....so instead of trying to fix it or throw it out I decided to put it into a pot.....to my surprise 5 mins after doing that I realize it started to straighten up from the training of the tree it broke from....thinking it would be like that for a while until it pushes root.....woke up to find it fully straight and buds got fatter......hope it is a success would be first clone...#happy growing
Likes
5
Share
@Naujas
Follow
77 days, for some reason, the girl is growing without me :( the vacation was unexpectedly long, I only managed to get these photos, I'll be back to see them next week on Tuesday, I think it might be harvest day :).