Feliz con los resultados de la hidroponia cultivar plantas autoflorecientes en hidro da resultados increibles en comparacion a cultivar en sustraro

✌️🎃 Thank you for checking my cultivation. 🤤 They're very sticky and smells a lot. 💧 Watering with Ripen for start roots wash.

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Week 9, final feed and removed the dead and dying leaves. Buds are rock hard, frosty AF, sticky and has a very pungent aroma. The end is nearing and I'm excited to see the final results. Thanks for stopping by growfessors.

The gorilla cookies has come out of the soil and it pushed itself up very well without having to dig it up out the soil. This is one plant I’m excited for I hope it grows to look like the photos The temps are rising around here making it some much easier to start seedling than in the winter with heater on full blast

Update of the garden

good plants for hydro grows they dont stretch too much, buds need support because of the weight at the end. i run in a little calmag issue because i went overboard with the bloombooster around week 5. this caused a lockout top leaves got effected by this other then that i had a huge yield.

This week i kept doing what i do. Also i germed some mothers for the big show

Okay sooooo big big sighhhh! I’ve been dreading making this post so I’m sorry I’m behind 2 weeks. I had to go outta town for 8 days. I had everything set up for my brother to take care of the plants. It was a really hot week the week I was gone and these plants were taking a beating and started to get burnt from the heat! One plant died and I’m super sad about it. But we living and learning out here! I have tried to trim the dead leaves without taking too many fan leaves off so I don’t shock em more. All last week was surviving giving the plants a little over a gallon of water a day! Doing some of the nutrients every day but not all. I like to run water in Between the nutrients. But with coco coir I’m not too sure if it’s needed. “Learning over here” so ya thankfully it’s been cooling down and I’ve learned some new tricks to cool the tent off! I got a air water cooler that’s blowing cold air into the tent and my 6” duct sucking out hot air. Things are looking better! One more week with nutritions then a week of flush and Harvest is what I’m thinking. Any suggestions thoughts or ideas for me! I’d appreciate it!

Veg: She got a long 5 months 1 weeks of growing and growing so big. Kept the feeds up and she drunk everything she got given to her, kept drinking and drinking them foods. I gave her the growth technology grow for the first 4 months of veg and the last month I gave her both growth technology grow/bloom, hydro Coco grow for the last month of veg stage. Gave her so much HST in month 3-4, just kept topping wherever I could, bending her over wherever I could. Really trying the stress her out to make her stretch and stretch. Started to see some real growth in her in the last month of veg stage, just seeing her doubling in size every week till we got in to some true flowering. Flowering: so we got about 8 1/2 weeks of flowering which was amazing. At the beginning of week one we saw some little flowers and by the end of that week we had some beautiful flowers starting to appear. I start pumping as much bloom feed in as I could I was still giving her the grow feed, but slowly bring them down by the end of week 2. We got some amazing weather other these weeks of flowering were we saw these bud truly start to go bigger and bigger, maybe the weather was a bit to hot for the plant at some points in the early flowering as we got some leafs burn from intends sunlight in the greenhouse. In week 3 we had a weekend of extreme heatwave over the country hitting highs of 34c witch in the greenhouse was getting up to 45-50c too hot!!! The water system failed on this weekend as well, what really hit her hard. I did think we was going to loose her that day when I went to see her. From that day I think we all realized that we have to keep a good check on the watering if the days were going to be so hot. I took all the small stems off the plant and really open up the bottom so we could get some more airflow over these really hot weeks we had, it was amazing to get this weather in the UK. Week 4 we did really start to see them buds coming everywhere, the middle of the plant was stretching. By the end of week 4 I think she did stop stretching and started to fatten up. I cut the growth feed out in the end of week 2 but I think I should of kept it up with the bloom feed till we got in to week 4. We was loosing a lot of leaves all over the plant when we got to the end of the stretch, so I pumped her some growth feed with all the same feeds she was on at the beginning of week 5. We did see a lot of leaf improvement all over the plant, with new growth on all the main clones. This played a big part in getting them buds fatter and fatter. Getting to the end of week 5 I stop the growth feed and just gave her more bloom and pk boost double. We really did see some buds popping up everywhere which was amazing and we had no real popcorn corn buds cause of opening her up. Week 6 she was drinking and drinking up everything we would give her no problem, got to get so much food in to her. She must of drunk over 30l of feed mixture doubled in this week. Started to look a lot bushy all over. When we hit week 7 them buds were fat and starting to lean around everywhere so had to give a bit more support, I tide the main clone to the four main canes and then tide all the side clones to wherever I could. She still drunk 25l of double mixture over this week and the temperature in the nights was getting so low this week it would of been getting to 8-14c, then greenhouse did still get nice and hot during the day up to 18-26c

End off week 10 start off week 11 gave them a feed today think this will be the last feed of nutrients maybe a week to two left what’s everyone’s thoughts start flushing now or give another feed of nutrients then flush the next feed thanks for viewing happy growing :)

An Tag 49 habe noch mal einige Zweige entfernt. Nachdem ich mich leicht verrechnet habe 😬 Ich benötigte für mein Netz nur die Hälfte aller Zweige 😨 Beim meinem nächsten grow toppe ich besser in Zukunft bei 4 Nodien, lässt sich besser aufteilen. Nun ist Gute ziemlich spack geworden, das dauert jetzt ein wenig bis sie sich erholt hat, danach schick ich sie auch gleich in die Blüte 😃 An Tag 50 habe ich nochmals geschnippelt und ein 2 Netz eingesetz. Jetzt habe ich die richtige Menge an Zweige. Nun dürfen die Zweige noch etwas länger werden bevor ich die Blüte einleite 😉

They are bulking up a bit more. Still nice and bushy both, still think both will be female. Finally, colours are getting greener and they are filling out nicely. Last couple of weeks before harvest, when my tent is filled to the edges on all sides and the plants can only go up is the moment I will hit the switch to 12/ 12. Thank you @MarsHydroLED, check out awesome deals on: www.mars-hydro.com I gave them a bigger feed today, up to now I have been stingy on the water, to prevent the gnats and let the root systems develop. Thank you for checking in on my grows and your comments and likes!

Big one got 4L last time and the other one 3L still. i think they want more fertilizer because i was a bit careful this time with it. thank god the temperatures are lower this week so i can maintain 26 degrees. buds thicken up good and i have spotted the first amber trichomes. ill still leave it for around 14 days.

Well i washed it together with one of my nuggz and maaaan the rosin ist damn tasty

Bit if fast growth this week happy days 😊

We are watching trichomes every day and it looks like it is almost ready so we are thinking of harvesting next week. It is already possible to see some amber trichomes. Unfortunately it seems that we are not going to harvest the expected amount, the buds were not very dense and fat, apparently the buds are just small leaves with trichomes.

Still had around 1 gallon of water left in the wicking buckets. They hold around 2 gallons. Flipped light to 12/12 today.