She's packing on some weight now shocked how chunky she is after the shock of the transplant. She's definitely a strong girl that's for sure

FLOWERING WEEK 1 - 4TH DAY FLOWERING/WORM TEA

Similar conditions as last week, but the plant is getting bigger, so is drinking more, I was finally able to feed the plant 2 times in one week. This week I also introduced a foliar spray. I applied the foliar spray 1h after the lights turned off, next time I need to give it a bit earlier, right after the lights turn off. I also used Mycorrhizae this week as well I feel that the initial problems that I had been solved, the plant is growing at a normal pace now. DAY 30 - Water PH - 5.80 PPM- 531 Solution Temp - 22 Watering Volume - 2L DAY 33 - Nutes PH - 6.02 PPM- 1600 Solution Temp - 21 Watering Volume - 1.2L Foliar Spray PH - 5.21 PPM- 1450 Solution Temp - 21 Watering Volume - 100 ml

Harvest :)

Activaron 24hs en un vaso de agua sin cloro. Luego al tupper con papel (rollo de cocina). Luego de 3 / 4 días ya se pasaron a tierra. En los primeros días y luego, en toda la etapa vegetativa vamos a usar un humidificador para tener una humedad entre el 70% y 80%

Die Umstellung auf 12/12 ist passiert, jetzt beginnt der Stretch und dann die Blüte. Die nächsten zwei Wochen wird nichts geschnitten, nur die höchsten Tops werden auf eine höhe gebracht. Ich bin sehr zufrieden mit dem aktuellen Stand! :)

So this week after I gave it under nutrients I apparently gave it too much nitrogen while having a potassium deficiency. Shiney dark leaves, So i fixed that, but some didn't bounce back, and I tried nitrogen. I think they are doing pretty good considering everything I've put them through SO FAR. lol. Nutrients are NPK Raw's total lineup, follow their instructions at first, Fastbuds adjustments as of this week.

11/3 Girls are looking great! They have all been fed once of that same mixture since last update, I may up some nutes and add bloom next water. See a little bit of Browning on a leaf of #1 So we will be keeping a close eye on that. Training is going really well, did no topping just straight LST and excited for the results, as you can see in the pics they have a lot of really nice large looking bud sites, just gonna get a few more exposed to light and air then will stop when veg growth seems to be slowing. Cheese #1 seems to still be a bit smaller but they both are getting nice and bushy just like I remember! Check out pics for more update!

Did a re-bath of Ph'd RO water for 25 minutes. Seemed to stabilize pH.

Howdy folks 🙌, been a good week for them, she is gaining weight 😍 Major development in its smell, she smells a lot more citrusy initially with sweet undertones. MUCH HAPPY 😋 She has been a pleasure to deal with and can't wait for her second run already 😄 Her clone is over a month old now and is doing very well. Green Gelatos are over due a flip switch but I'll wait till this round is finished. Will stop the Pk 13/14 now and A+B too. That's it for this week. Stay safe, cyall later 🙏

Finally got myself a dehumidifier, now i can controll the humidity in my room because it often went above 60% 🤷‍♂️🏻 Also love how the big northern light is really packing some weight! & the buds on the bottom look as good as the ones more on top!! Can’t wait till i can harvest all of em😁

Poco a poco tomando mas fuerzas estas pequeñas en su segunda semana de vida,parametros controlados se espera una buena evolucion estas semanas siguientes!!

**Week 8 Flower | GMO × Triangle Mints BX** Week 16 overall — final week, and this is it. The fade has been pulled back further, **EC down to 1.0 mS/cm** total, giving the plants the last bit of room to clean themselves out completely before the chop. Everything else holding steady: height **110cm**, lamp at **20cm**, watering **8L per plant per 24h**, **pH** at **6.2**. Day temp **25°C**, nights **23°C**, humidity **50%**. Feed stack stripped right down for the finish: **Athena Fade**, **Canna CalMag Agent** 1.1 ml/l, **Aptus Regulator** 0.1 ml/l. Nothing more needed at this stage — the plant is running on its own reserves now. The GMO × Triangle Mints BX has gone the full distance. Smell is at its peak, frost is heavy across every site, and the colour expression that started showing weeks ago has carried all the way through to the finish. This is the last update before the chop — harvest report to follow. Next update Sunday. Stay tuned. jeder soll growen wie er will

Going into flower on 4/10. Plants have been growing and inch or two every day. Suspect front middle and back middle to be males.

I do less nutrients during this week and treated as if it’s weak one because as you know, I use fox forms ocean forest and it has nutrients in it so I don’t wanna overpower my plants and I just wanna see how they do with a little bit of nutrients before I upped the dosage

So I made a totally noob mistake. I can't believe I didn't think about how fast the males would spread pollen. I was still trying to figure out which male I wanted to use for selective pollination on a specific branch. So I pulled the males and I'm attempting to collect pollen using a trim tray screen. Its working quite well and I'll make a video with that as well. I'm not even sure if it's viable or if my attempt and mistake of leaving the males too long will work. So anyways I realize now how delicate it is to have males. They start popping fairly quickly. Come check out my YouTube y'all

We start the 9th week ! I will stop fertiliser from now on and let Gigi and Bella pump their energy from their leaves 🍁 Flowers are getting strong and full of matter ! I hope they will keep having more and more density. I am so happy of this first inside grow, with this Sweet Bourbons Kush I didn’t know ! Can’t wait the harvest !! Update 1 : waretering without fertiliser done, let’s wait that they use the leaves and get more density ❤️ Some little close up photos of the flowers : they are so jiiice

This girl has been growing very nice remove all the branches that were below 14 inches from the base of the pot to promote growth over the top only .this girl has continued to stretch and it's starting to smell like a typical of her kind hoping to see great things out of this girl that has developed a lot of sight branches. thank you for reading I will continue to update have a happy grow.

New week for the world canna cup grow Couple beans have bite the dust but i still have enough plants for full grow some that are growing not so great so have some other beans still in shot glass if more would fall down 13/2/22 Most of baby's growing good some not so great . So i decided to drop some more beans in shot glas Barney's farm banana punch 👊 and Spliff purple berry Kush 15/2/22 It's not always perfection and showing the good bad ore ugly it's all part off it would have liked 3 beans each strain but now i drop some other strain so not nothing lost wil be having more flavour in the room nothing bad about that either Purple berry Kush from SpliffSeeds doing good. and i gots one ETHOSGenetics Ethos Apex R1 growing given to me from a good buddy not gone call names here otherwise people gone dm him for free seeds you know who you are sexy mofo 😉 See y'all next week visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter