Hi guys A day early but thought ill post this now day 20 from switch, just done a major defoliation on them I will do a final next week, im going to add a.little bit of nitrogen in the mix as I feel the bloom doesn't have enough in it on its own, plants are doing well tho. Bullets are appearing now so thats a good sign, installed the ac infinity s6 cloudline and put in the dehumidifier. I'll keep you all posted Happy growing guys Day 22 from flip Hi guys I done the day 21 defoliation yesterday to expose the bud sites. So this week my plants are looking really hungry. I am using the bloom mix and trying to get some colour back in the leaves. The blue cheese is by far the better plant at this stage. I'll keep you updated. Happy growing guys 👌💪💚

to mutch cold here 2 week with low temps at night cicle betwen 12 &16 graus in europe. maybe this is the reason of that purple orange colors (:

Over the last week I’ve continued with defoliation process and I removed downer leaves that were not developing properly. On day 78 I added support for aide branches on B and C. I started flush of plant C on day 80, so we’ll see how she looks. I keep feeding other plants but I will be starting flush soon. 😎

Vorblüten. Insgesamt wirken sie gesund, mit kräftig grünen Blättern und ohne Anzeichen von Mangel oder Stress. Die Beleuchtung läuft nun im 12/12-Zyklus. Der Abstand zur Lampe wird regelmäßig kontrolliert und angepasst, um Verbrennungen zu vermeiden. Die Temperaturen liegen tagsüber bei etwa 26 - 28 Grad, nachts bei 18–20 Grad. Die Luftfeuchtigkeit pendelt sich bei etwa 45 bis 50 Prozent ein. Die Pflanzen werden alle zwei bis drei Tage nach Bedarf gegossen. Diese Woche gab es die erste Gabe Blütedünger mit reduziertem Stickstoffanteil und mehr Phosphor und Kalium. EC- und pH-Werte liegen im optimalen Bereich. Ein Schädlingscheck verlief ohne Befund. Alles läuft reibungslos.

Wow she's charging through flowering! On she goes.

Somehow I counted weeks in a silly way, so I thought this was week 8 but it's still week 7. LoL. Plant is doing great anyway, She's big, exceeding 70 cm diameter, With so many colas at canopy level I expect her to yeld very big fo an Autoflowering strain, The training succesfully shaped her resulting in 10 branch reaching the top canopoy level. To me the key to a good training is timing, much more than continuous adjustment. This plant was bent just one time on main stem and one another time little later the branches. We had rainy days so I used a dehumidifier for a day or two, now it's dry again outside so no need for it anymore. She's still thirsty like a bitch as she drinks 5 liters of water every two day. Maybe I'll make a drip sistem for my next grow, watering has been boring lately. I'm not giving her anything to the end now, she's doing fine like this. The humus coupled with slow release fertilizer is doing a great job. She has some nitrogen excess to me, but she's the only plant to show it in a batch of 6. The issue seems very small to me anyway. Day 48 checked trichomes, some is turning milky already, can't wait for the buds to ripen :) Ciao Bottanico

Gracias al equipo de Herbies Seeds, Marshydro y XpertNutrients sin ellos esto no seria posible. 💐🍁 Runtz Punch: Runtz Punch no es una cepa para personas de mente superficial, está hecha para reflexiones filosóficas, euforia dichosa y un gran subidón corporal a la hora de dormir. Es la cepa perfecta para romper la tolerancia en cualquier fumador experimentado. ¿Cuál es su secreto? Esta cepa tiene un gran impacto con un 29% (sí, 29%) de THC. Es mejor reservarla para noches de ensueño bajo las estrellas, deja que tu mente divague mientras tu cuerpo absorbe todas las cualidades terapéuticas que tanto necesita. 🚀 Consigue aqui tus semillas: https://herbiesheadshop.com/cannabis-seeds/runtz-punch-herbies-seeds 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. 🚀 Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/

This is why I say always check your garden. In just 3 short days she went BALLS OUT. Now I am down to four ladies, that will be plenty. 3 BBFC and 1 Nuke Heads Nuclear Scary Bubbles. I am not sure if it was Stress or Weak Genes, I did feminize these myself without any back crossing. Sometimes you just get a true Herm. no Nanners on this one just Balls to the wall man. that is an Accept Reference if you don't know it ok your just too young.

Day 21 Yay, Fiona is a dream of a plant so far. Huge, dark, lush leaves and fast development. She is going to be topped tomorrow as I am 100% sure she will be able to take it like a champ! Day 22 Got up early to top the princess and fed her nutes and calmag afterwards 🤞 Day 23 Fiona took the topping without any issues so far. I am expecting her development to be a bit slowed down but no major complications. Her leaves are as big as my hand and I am pretty sure she will fill up the entire 60x60 tent by the end of next week. Day 25 Yes, well. I don‘t even think Fiona slowed down after topping. I love this plant. Tomorrow, the two Autos will be gone. About time because she has started to stretch in every direction lately. Day 26 Today was a good day for the Princess. Started her with .3 water breakfast. In the afternoon, her roommates moved out and in the evening, I added the humidifier I got her and set up the SCROG. Hope she is as happy as I am.

I'm not happy with the overall harvest...it produced some good tasty smoke due to fine nutes and a wonderfull strain but i fu**ed it up by using a very bad soil...growth was very slow and also lost like 25g due to budrot/mold...again my fault as i set up ventilation the wrong way (RH was good but some buds didn't get enough airflow) Again i learned alot of things and got 275g of good, great smelling smoke...so not that bad...but could be much better 🙂

Somewhat slacking with detailed photos from this week, been busy with the holidays/ family etc. hopefully should have a little more time to take some good ones for next week.. Not much to say, they are getting quite big! some more lower branches and leaves were removed and I've been watering every other day, about .5-.75 gal per plant until I see some run off and the top looks evenly moist. End of week 1 of flower and there are Lots of white pistils, a pleasant smell (controlled by my filter/vent) and some major stretching happening on the strongest branches. Already raised the light by a few inches twice now too keep the distance over 12 inches from these stretchy ones! 😏 Also found a large healthy looking seed in my grinder that I've saved (Mac 1 supposedly, its good smoke)

Strain. Blackberry Gum 💜 Breeder. Seedstockers🐿️ light. Mars hydro ts1000 💡 soil . biobizz lightmix 👊 nutrients. biobizz grow 🌱 biobizz heaven 😍 She is growing really well . until next week happy growing 💚 📢📢 UPGRADED to the MarsHydro ts1000 EFFICIENCY WHITE LED GROW LIGHT: Newest SMD LED technology provides highest PAR/LUMEN output(743umol@18"), designed to replace a single-ended 250watt HPS/MH; MARS HYDRO TS 1000 growing light makes you get 30% higher yield compared OLD blurple led lights, Max 2.0g yield per wattage (power draw). LOWER RUNNING COSTS & HIGHER YIELDS: Actual Power 150W with 342 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 80x80CM, Max Coverage 100x100CM. Over 90% light energy can be absorbed by plants; higher intensity and more even coverage in a MARS HYDRO reflective grow tent, or by crossing over using multiple TS1000. SUNLIGHT FULL SPECTRUM LED GROW LIGHT FOR WHOLE GROWING STAGES: 760nm IR/660nm Red/5000k blue/3000k warm white light. Infinite close to natural sun light, TS1000 suits for all plants whole stages indoor growing, rapid plant response from seed to flower, achieving maximum quantity and high-quality yields . CUSTOMIZED GROWING NEEDS WITH UPGRADED DIMMING DAISY CHAIN: Newest TS series growing lights support multi-lights connection up to 15 lights for your various growing needs and stages; TS1000 light auto sensing power supply works on both 120VAC, 230VAC and 277VAC, suits for Large Rooms and Commercial Setups. HIGH REFLECTIVE & NOISE FREE DESIGN: High reflective hood, noise fanless free TS series grow light. Quickly aluminum heat dispersing material increases light intensity up to 20%, reducing light lost to aisles and walls, allowing your plants receiving more energy without burning your plants in maximum headroom Shes up and running 💚🙏😊 Thanks @marshydro for this opportunity

Switched the LED to 'Flower' mode following 5 weeks of just 'Veg' light, she is showing signs of coming into flower now. She is short but bushy even after some defoliation. Looks like she has a few good bud sites developing. Bit of white tip on the edge of the leaves has appeared, not too concerned yet, will monitor and try and figure out what the problem could be...Possibly slight sign of 'nute burn' or N toxicity but i have been feeding her lite, i'm assuming the substrate is pos still 'Hot', rich with guano and mycorrhizal fungi. Took a cutting to clone from the Auto OG Kush earlier when i topped her just to see what she would produce. She rooted well and has filled the 1ltr pot. As expected going into flower the same time as the OG Auto mother. 17/9/18

Week 6 and these girls got a scrog net added. As the plants are getting extremely heavy. Started to unfold an open up eagle spread style. So had to lend a helping hand. They got a scrog net added an the untrained plant got tied up from tents upper support bars an lower branches got some support also from the net. So far everything is going smoothly. The e680s light is putting in that work work

** COST ** TO RUN - Used previous ⛺️ setup : $0.00 - Monthly electricity : $36.73 <-- other ladies sharing ⛺️ - 1 Gallon Fabric pot : $0.10 - Bonsai wire : Apx. $0.03 - Reused soil from last run : $0.00 FOR NUTRIENTS - Jadam Microbial Solution : $0.00 - Fermented Plant Juice : $0.00 APPLYING - JMS : 30ml / 1 Litter - FPJ : 30ml / 1 litter TOTAL COST : $36.86 Throughout the week, I give JSM, and fermented plant juice once each ^^ Hope you guys have a wonderful day today ^^v *** Please Like, comment & share *** Highly appreciated -----/-----<@

🍬

Tag 16 in flow. Dieser cut is soooowas von geil vital. So wie die apples n banans.👌🔥 top genetik top cut🌱 Freu mich ihr beim wachsen zu zusehn🙃😁 Diese geilen vitalen cuts gibts wie immer bei ROOTS-FARMS. Vital und sauber.

A lot happened this week but she seems to be recovering and not worsening. I fed plain ph’d water end of last week but got a little too cavalier with too much top feeding and adding stuff without adjusting ph. All the top feeding is how debris and runoff kept getting into the base and mucking it up. I was out of homemade calmag so I had a bottle coming in the mail. I ended up adding calmag to not a lot of water and not ph’ing it and top feeding/pouring rest into the watering base later in the day after adding plain ph’d water. Wrong move. She appeared to slow down drinking but I chalked it up to a full base and plenty of top feed. Topsoil dried out very fast but I let her sit assuming she would start drinking eventually. This continued for 3-4 days, and also was happening to one of the photos I did the same thing to. Starting smelling something rank around this time so I checked the bases and found what is in pics 9+10. Ph was 8.5 and had this brown chunky film all over!! Took out all 3 bases and scrubbed thoroughly with soap and water and rinsed with some vinegar. I was worried about how dry and hard the soil/roots must be but I also didn’t want to do a full flush so close to her finishing. I opted to put 1/2 strength tiger bloom/big bloom and full strength calmag into full 1.8 gal water can ph’d to 6.5 and top feed slowly over ~20 min so it didn’t just rinse everything out. About 20% runoff which tested at 5.8 which seemed a little low but not as terrible as I feared. Cleaned the base back out after no more runoff and refilled with normal strength tiger bloom and calmag, ph’d to 6.5. This seems to have been the right move, 60 hours after flushing/cleaning/refilling, she has drank 75% of the base and topsoil is also not dried out. But we’re not done!!! The 2 photos also got a clean base and proper refill. The next day I checked the bases and found some insects on top of the water in ALL 3 bases shown in the last 2 pics. Teeny white things that kinda jumped on top of the water and seemed to stay underneath the fill port to get some of the light coming through? Hard to identify but I think they might have been springtails and not something destructive. Either way I made a weak vinegar/water solution and sprayed them aggressively over 24 hours and they seemed to die and not return. Only saw them in the bases and not anywhere on the plant. A lot of the leaf tip curling and spots spread from last week but seems to be contained and not worsening at the time of writing this. It seems contained to the top ~30% of the fan leaves and minimally on sugar leaves. While her buds did grow and thicken, I’m sure this set her back a little. All in all she had the water ph imbalance, definitely some light stress, nute burn and a little potassium deficiency. Got a little cheap digital microscope as well, trichomes still maturing with at least 30% still clear, plenty of white pistils as well. Some purple coming in on sugar leaf tips. Smell is much stronger. Idk if this is indicative of the buds as well or the “right way” but if I remove any small fan leaves I swipe the stem between two fingers to smell the oils. Still giving a very strong funky citrus scent with an earthy finish. Flipped lights to 12/12 for the photos at the end of the week. I just couldn’t wait any longer with how big the photos are. It also didn’t help that when I adjusted the light for the mimosa and moved it to the middle, the photos were getting much less and resulted in them stretching a lot with too much internode spacing. Not the end of the world but supercropping is definitely in their future.

Bonjour à tous les padawans et maîtres jedis Jour77 arrosage avec 30 centilitres d'eau ph6.3 Jour80 arrosage avec 40 centilitres d'eau ph6.3 Jour82 arrosage avec 30 centilitres d'eau ph6.3 Jour84 arrosage avec 25 centilitres d'eau ph6.3 J'estime à environ 10 12 jours la récolte. Comment connaître approximativement le moment d'une récolte en vue d'un rinçage ? Ou tout simplement si la plante est rincé de tout excédant d'engrais quand procédé à la récolte ? La meilleure façon de juger de la maturité des plantes est de regarder les glandes de résine, également appelées trichomes. En utilisant un microscope idéalement avec un grossissement de 100x, vous pouvez facilement déterminer l'état des glandes en résine et éviter d'avoir à deviner. Les trichomes passent par 3 étapes différentes: 1. TRANSPARENT Les trichomes transparents ne contiennent que des cannabinoïdes précurseurs qui ne sont pas psychoactifs. La récolte à ce stade ne vous donnera pas un produit très puissant. 2. MILKY Les glandes en résine laiteuse contiennent du THC entièrement mûr. Pour obtenir des têtes aussi puissantes que possible, vous devez vous rapprocher le plus possible des trichomes 100% laiteux. Notez qu'il est impossible d'obtenir 100% de trichomes laiteux, car de nouvelles glandes de résine sont produites en continu. De même, même après la récolte, les trichomes continueront de se développer. 3. AMBRE Les glandes résineuses de couleur ambre indiquent que le THC a été converti en CBN, une forme dégradée de THC. Cela signifie que votre produit a perdu une grande partie de sa puissance. Le CBN n'est souhaitable dans aucune culture, car ses effets sont plus narcotiques qu'une véritable élévation. Personnellement j'aime bien les récoltes autour de 15 à 30% d'ambre mais c'est juste une préférence Que la force soit avec vous 💪