Likes
9
Share
10/29 fighting off spidermites on some of the smaller plants 10/30 using spinosad and safer brand insecticidal soap 11/01 the mainlined plant is finally starting to grow upwards. other plants seem to have deficiency. then plant 2 and 3 need to be transplantwd from their 1 gal
Likes
2
Share
Likes
14
Share
Likes
5
Share
@Del_grow
Follow
Not a lot to report which isn’t evident from the pictures. I did build up the remaining three strains to the same height as the tallest they’re getting between about 750-1200 ppfd in the centre, which seems a lot but I am supplementing C02 and there’s no signs of light stress or burn or even foxtailing so I guess these girls can take it! They’re fattening up still, always hard to tell how dense the buds are but the Gorilla Zkittlez looks like it’s gonna be the heavy yielder and might just be a touch behind the others for development. The Peanut butter cookies is still getting fatter but seems the other end of the spectrum and may be ready to finish soon, although she’s still putting out new pistils, pretty purple now too. The Tahoe OG looks right in the middle, packing on a bit of bulk now and the bud structure looks really neat and tidy. Then finally the Runtz muffin, I carelessly snapped off a top bud when defoliating last week and dried it up and it’s 🔥 already so looking forward to this one maturing properly. I forgot to put that I’d been feeding molasses for the last few weeks, just to feed up the microbes and see if it’s of any benefit.
Likes
20
Share
I closed a light 2 days. It gonna be flower but this week I'll re-veg a plant. I change a pot to 10 gallons and use great white(mycorhizae) and Mag Xtra from Sensi cal(cal-mag).
Likes
9
Share
We start week 3 of bloom!! Goofiez 2 amor compound genetics it’s the champions!!
Processing
Likes
3
Share
@Dico29
Follow
Day 141 still going started to reveg but lowered light schedule
Likes
20
Share
16/01/2022 - Day 91 - First day of the 14th week. Small one being "eaten" by WPM [see snow video], not much I can do, RIP Big one still on the grind, confirmed that it's like she has been topped, there are two main stems but she did all by her self. She is suffering WPM, too, of course, but being a little bigger and stronger I'm removing as much as possible. Wish me good luck and let's hope in sunny mild days 🤞☀️ - DD
Likes
22
Share
Another 2 weeks to 18 days and should be able to wrap this one up. Looking promising considering only 330w was used, 36w/sqft. Its bud ripening time. Pics are of Day 46 currently sitting at day 49 to be precise. GHL
Likes
23
Share
So far everyone is looking great, not much to say in the seedling stage. Also I have 2 more diaries to be uploaded shortly. Happy Growing guys
Processing
Likes
23
Share
Hi everyone 🤗. The lady developed very well this week 😃. Only she is a little more hungry than she got 😄 which is why she gets a little more of the Orcanic Grow Liquid from the next watering 👍😃. Otherwise everything is going great. I wish you a lot of fun with the update, stay healthy 🙏🏻 and let it grow 🌱 You can buy this Strain at https://thecaliconnection.com/seeds/girls-scout-cookies-34.html You can buy the fertilizer at https://www.greenbuzzliquids.com/ Type: Girls Scout Cookies ☝️🏼 Genetics: GSC Tint Mint 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green Buzz Liquids : Organic Grow Liquid Organic Bloom Liquid Organic more PK More Roots Fast Buds Humic Acid Plus Growzyme Big Fruits Clean Fruits Cal / Mag Organic Ph - Pulver ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 - 0.4 EC. Add Cal / Mag 2 ml per l water every 2 waterings . Ph with Organic Ph - Pulver to 5.8 .
Likes
7
Share
@Nw4117
Follow
I reduced nutrients. Powdery mildew is continuing and getting slightly worse. I sprayed it with an apple cider vinegar mix. Hopefully that helps. The smell on the flower is really incredible. Smells berry like, and clean. I opened all vents in tent and have been leaving the window slightly open as well. Heater is keeping up ok. Even in the cold nights it’s keeping it at 66F with everything open. The leaves went crazy refilling the canopy. I’ve been pinching off some of the longer leaves and some that had mildew. The buds look good. Trichomes are cloudy enough yet, but it’s getting close. I’m gonna err on an earlier harvest, if the powdery mildew continues. I’m making some LAB from KNF, along with other natural fertilizers. If the vinegar solution doesn’t help, I’ll try that when it’s ready. Excited to try KNF on my outdoor garden and lawn. Planning on growing a couple canna plants outside this year. Gonna keep my outdoor as organic and natural as I can. The clone is doing well. The areas that I knuckled are strong now. Looks like biceps. Powdery mildew seemed to get this plant worse than the other. I’ve been wiping it off with my fingers as I see it, and finally treated with the vinegar solution too. I increased its feed to week two of medium gh feed chart. Expecting a lot of growth this week even with little light. Getting my dry closet ready as well. Got another humidity controller and an upgraded temp controller with Wi-Fi. Gonna dry one more time inside my house. It’s dry enough inside that I should only need a humidifier to keep it right. Need to get another one before I harvest and then should have everything. I used grove bags last time to cure and will never use anything else. Ordered another cheap TDS meter. The one I had got dropped in the solution. Update: 2/11 The apple cider vinegar definitely cleared the powdery mildew up, but I found a few spots I think I missed directly in the middle of the large plant. I don’t see anything on the clone. I’ll reapply in a few days and pay closer attention to the middle of the plant.
Likes
46
Share
This plant was an absolute dream to. Grow, no issues at all with health of plant, just struggled to tame her as she was a a thick strong climber 💪💪. I'm so impressed with how this turned out, I could have flushed for another 3 days to make it 12days but I needed the space. After The 2 days of dark I was recommended I can definitely say it has vastly boosted her trichomes and the smell when I opened the tent blew my head away 😍😋 Aiming for a 10-14 day hang dry, The 10-12 weeks curing in jars with humidity packs. I will update with a dry bud weight and smoke test 👌 Bud wet weight is just 500g+ Final bud dry weight is 298g. Of juicy resinous purple and orange buds 😍 smells like sherbert and hang dry smoke test revealed a candy sherbert, no banana yet but hoping like the grow it matures with cure process now. Hits eyes straight away, sandy bottom kids, giggles, munchies, fun time with Mrs, bed. Full cycle with this one very happy over here 😉😁💚 FAT BANANA AUTO FROM ROYAL QUEEN SEEDS, big thank you to the team, and the breaders. What a pheno I received. I appreciate you all
Likes
3
Share
@AbbyCat
Follow
Was a wonderful result and would recommend this strain for anyone with basic gardening experience.
Likes
53
Share
@xbrico
Follow
Evening all...back on it AGAIN!!!! Worst is, in the middle of a heat wave (Hottest day every recorded in this part of the world a couple of days in a row!!!)...still need to finish trimming my last crop!!! :'( Will get that done over the next couple of days as these girls need rehoused!!! So, got a cloner at the start of the year...was planning on clone a spare wedding cake I had but that sort of went to pot and life got in the way and that didn't happen. As I also got a hold of an Ultrasonic Mist Generator, I thought I'd give this "Fogponics" Germination thing a go!!! Seeing as @Sweet_Seeds donated a few Magical Beans to my cause, I thought I'd give their genetics a whirl. The Red Hot cookies looked too cool to pass up on!!! So, got the beans popped on the 12th of July and by the Thursday, they were showing their wee heads. One though was also showing its wee tail - I hadn't buried it enough and it popped itself out of the Jiffy Coir plug I started them in. I did get it reburied and it has started growing but you can see its the runt in the pic...intend on keeping this one as a cloner (And will give the cloning a fair whack this time!!!). Since I was worried that the one that popped the soil was going to be impacted, I dropped a 3rd bean and true to form, it was out of the root riot in 4 days also. Got them into the 'fogponics' machine and let them rip (Under 2x11W T5 Sunblaster 6400/k's and a Amazon Special LED light for extra Spectrum) and they seem to be coming on grand. Noticed some yellow spots on the leaves and in 2 minds if it was: A. calcium (As starter plugs are Coir and I didn't put calmag in the plug hydration mix - Jiffy Original plugs are supposed to be buffered for this!!!); B. if I should have broken and washed them out of the Coir and put them into straight Hydroton (The fog could have been saturating the Coir and choking the internal roots a bit) or C. if its just the abusive heat we've been having here (In a country where A/C is basically unheard off as heat doesn't exist outside!!! 😋). Roots are ripping out of the net pots now so they're about as ready for transplant as can be...just wanna give a day or 2 more to see if the heat here settles as I can't adequately cool the area they're going too - but then again, under LED so heat may be good as it doesn't heat the leaf surface up as much! Plus I have a couple of plants to trim...still hanging in their humidor tent when is needed again for growing! Think this will also be the retirement party for the Wilma. Going to build an Undercurrent Fallponics system when this run is done (Wont have time to get it setup before these girls need forever homes!!!). Have the crates bought and a bit of research done on how to DIY a build so hopefully this turns out to be a decent run. Also have a few people with building experience on hand to give advice. Since last grow: Lights have been upgraded to a Geekbeast 630W Pro LED (3500K Spectrum - UV 385nm and Far Red 730nm built in [won't use the 730's as they can't be run independent of the Main Lights...be wary of this if you buy one off Alibaba for the 730's built in!!!] - Will run the 385UV's though throughout the grow for more blue...will run then 3 hours after lights on to until 3hours before lights off). Also procured an InvisibleSun LED 730nm Flower Initiator (Will use this for EOD Far Red treatment to try a 13/11 flower cycle) and a Migro UVB310 fixture - For the Trikes!!! 😝. Have a Haliea 300A winging its way to me as we speak. Have some Non-Stick Micro-tips flying in from the Grand old US of A a will to get a better, more consistent yield. Think thats about all I have for now...Happy Growing all!!! 💪
Likes
Comments
Share
Likes
100
Share
@AsNoriu
Follow
Day 111. First is ready, second week behind, third maybe even 3 weeks behind .... Plus they are LEAFY ,!!!! Trim jail ... Wet trim for all of them - no doubts !!! Day 115. Still hanging, slowly drying and result should be decent at the end ... A week more I guess, very humid in UK ... Day 118. First trimmed - 175 g. Other is chopped ! One still grows ... Day 136. Chop day for the last one !!! Long run .... Happy Growing !!!