Likes
Comments
Share
@Krisis
Follow
Heya long time no see 💚😳 06-27-26. Popped her into a cup of happy frog soil, sprayed with water, then sprayed inside a sandwich baggie and covered the cup. Didn’t put seed deep enough and got a bit of helmet head, but she popped it mostly off. I knocked it the rest of the way. I’m using happy frog for the seed starting, but will use Coast of Maine for transplanting. Will be first time using it. I put some information down there should you care to read it. 👇. Noted for advanced growers LOL. Well.. rip. ? 🤭 Garlic Mint Sherbet is a photoperiod line built from a Garlic Cookies (GMO) clone crossed with our selected Sherbanger phenotype (Boston Roots Seed Co). The goal behind this project was to combine the raw intensity and resin production of GMO with the layered Sherbet-based terpene profile of Sherbanger. The terpene profile is complex and evolving. At first, it leans toward a soft Sherbet sweetness, but as it develops, it opens into something much deeper: fresh garlic notes combined with a spicy, refreshing minty edge. It’s a profile that keeps changing the more you smell and work with it, moving from creamy to sharp, from sweet to pungent and cooling. Structurally, plants produce large flowers with heavy trichome coverage, making this one of the highest resin-producing lines in our catalog. It performs especially well for extraction, with strong returns across different methods, and stands out as a reliable washer.Plants tend to develop dark coloration, ranging from deep green to almost black and purple tones, especially under proper conditions. From a cultivation standpoint, this line shows medium sensitivity to environmental stress, particularly water temperature during processing and overall grow conditions. When dialed in correctly, it delivers both in yield and resin quality.The effect is powerful and body-heavy, leaning toward a strong couch-lock. Best suited for evening use, relaxation, or before sleep. Please Note: this strain requieres experience, we recomend it only for Advanced Growers
Likes
9
Share
4ème semaine de floraison. Cette dame ce porte a merveille ☠️☠️💀 irrigation tous les 3 jours environ 6L, 12L/Semaine.
Likes
6
Share
@Ryno1990
Follow
Week 5 for the Purple Lemonade went great feel like I didn't see her all week from being so busy but she has been growing great shooting up tops everywhere as shes in full flower mode loving the medic grow fold 6
Likes
5
Share
@pzwags420
Follow
I had to top Cantaloupe haze and White widow as they were too close to the lights and I didn't want to loose any ppfd on my lowers. My GSC seems perfect for not topping. next time I would top those strains at least once. I have been flushing the CH and getting run off around 1200ppm which seems like the max she can take the others like it stronger so I have been flushing them every 2-3 days. CH is tough to keep happy but will continue to monitor. All plants are in week 4 of flower 12/12 from seed.
Processing
Likes
16
Share
Hello everyone, Been busy this week working around the house so not much I can say. Heres a little video of there growing... See you guys next week
Likes
33
Share
Been a long time coming as I wanted to run theseva while back, had a lot going on and a few big changes but I'm back now. Hope everyone is staying safe at a time like this due to COVID-19. Back to the fun stuff... These girls germinated in around 48 hours, bemn going strong since. Only at day 6 with not much to report as only small seedlings. Will be back soon, looking to have this run as dialled in as possible. Stay tuned - FlavoursUK
Processing
Likes
2
Share
@MephodMan
Follow
Topped to 4th node. Started brewing ~5l of neem/kelp/aloe Trying out LST clips for the first time. Added a couple of small LST clips on the 4 largest fan leaves. One of the large lower fan leaves snapped off this morning when I was adjusting the LST clips. It looked like it had already snapped yesterday. Adjusted VPD to lower humidity
Likes
2
Share
@MT_Farmer
Follow
The plant rose above the ground on the 24.6., this is Time Lapse ends on the 13th day of vefetation. I started the grow in my old cupboard grow sed up. I opted to upgrade the the Home Box Q80+ in the coming week. As i was using the Pro Mix i dont need to ad any nutrients for about 4 Weeks. Therefore for now I am only monitoring the amount of water i give them. As I decided to give Air Pots a try for this grow, I am intersted to see how much i can water, relative to my previouse grow with a fabric pot.
Likes
8
Share
Happy with all the weight gain on this lady over this week. Last feed of compost tea. Lady is ready for flush to start!
Likes
24
Share
Vegetation: To keep temperature and moisture on optimal levels at around 23°C / 65% I'm using two mechanical timers. - 24/7 on: Fans and water pumps (+Ventilation after 3.11.) - Timer 1: Lights and Humidifier 18h on / 6h off - Timer 2 (BROKEN 3.11.): Ventilation 18h (15min on / 15min off) / 6h off NOTES: Everything looks good and the roots have appeared from almost every (11/13) rock-wool cube. From now on I'll mostly water the plants from bottom by adding the wanted amount of nutrient solution on a plate, and then placing the plant on top of for ~15seconds This week I'm also starting to prepare the hydroponic systems (2x NFT-GT90, and 1x EBB-flow I think) and stronger nutrient solution since my plants are becoming ready to be transferred. Spreader-mat is the base of my plants when I have transferred them in to the hydroponic systems. DO NOT place more than one layer of the spreader-mat as it is not meant to be used like that! As you're cutting the mat for NFT's, be aware to have some extra for your peace to reach nutrient solution below the tray. That way you won't get noise from water dropping when systems are turned on. Day 15 (1.11.) Day 16 (2.11.) First watering with a bit stronger nutrient-solution (~ EC 0,6 / pH 5,9) than before, starting with 50ml/plant and watering once from above. Slowly increasing EC to 0,8. I cleaned and assembled 2 out of 3 hydroponic-systems which I'm going to use. I'll do the same also to the last system, but it currently has my plants on top of it so I'm going to do it later. I want to make sure that my plants have built healthy and big enough root system before transplanting to hydroponics. I'm waiting for the rock-wool cubes to be bursting of roots so they won't drown on their first day in hydro. Also, as the plants are bigger before the transplant, I'm able to fill my nutrient-solution tanks full with correct strength nutrient-solution for Mid-Vegetation from the start, therefore no need for that much adjusting later on. Day 17 (3.11.) I noticed my other timer which controls the lights had stopped working... The lights were on when they shouldn't have been, I noticed it an hour after they were supposed to turn off. I think I caught up to it early, but it may have been on for maximum of 2 days straight. No worries there since on vegetation-phase the plants don't necessarily need any sleep (Even though you should avoid quick changes like that!). Roots have appeared from the bottom of every cube and plants are looking pretty healthy. I think they are almost ready for hydroponics. Day 18 (4.11.) Few plants are showing symptoms of nutrient deficiences or some sort of sickness, not certain what exactly. I'll be keeping an eye on it. I'll be transferring in to hydroponic systems in maybe a week, so I don't want to stress my plants more than what's necessary. Increased my solution strength to 0,9 EC with a bit more Cal-Mag than before, and watered the plants for 50-150ml each plant depending on weight and size. I'll be slowly increasing the strength by around 50% during upcoming week. Thanks for tips! Day 19 (5.11.) Day 20 (6.11.) Plants are recovering well from deficiences and I just transferred all of them to hydroponics. I don't have the water pumps on for 24/7 just yet, at this point I water them a couple times a day by keeping the pumps on for somewhere around 15min at a time. Lights are now set to 60% and I also added a tower fan to circulate the air and shake the plants. Day 21 (7.11.) Lights are now set to 70% since the Led's and plants are spreaded wider in the tent than before. Distance to plants stays the same at 75cm.
Likes
14
Share
Great growth this week despite a pretty scary heat wave that rose my tent temp from 78-84/85...but she survived!
Likes
37
Share
@Rangaku
Follow
Arrrr the green crack has life in her yet , had some nice growth on this little runt she remains compact but has shown enough to keep around . Transplanted into her forever home in the 28L pot , even in her small state she was root bound in the 12 L , hope to triple her size this coming week .
Likes
57
Share
@Roberts
Follow
Runtz Punch is growing great. She has a bunch of pistils for preflowering. I switched the light time today. I will do a solution change to blooming nutrition next week. I defoliated her some, and lollipopped her more. Everything is going great. Thank you Spider Farmer, Athena, and Herbies Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.
Likes
29
Share
@Libanese
Follow
I stopped with fertiliziers, i didn’t watch the tricomes until two days ago… There a lot of its ambred… it’s too soon if i follow the farmer’s schedules The pineapple needs at least 2 weeks, the other 10 days.. I think I will harvest them all in 14 days.
Likes
23
Share
@SkunkyDog
Follow
Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme. Rabattcode für den BIOTABS-Webshop https://biotabs.nl/en/shop/ GDBT420, damit erhalten Sie 15 Prozent
Likes
5
Share
Hello week 6 looking 🔥 2 yellow leafes i think underwater as pretty hot now ☀️☀️☀️?❤️
Likes
13
Share
@Rungood
Follow
La plante grandit de jour en jour et ses bud commence a faire des superbes filament orangé ,aucune carence pour le moment... wait and see