Likes
Comments
Share
@Rangaku
Follow
Runtz the resin machine, she’s so sticky and fruity a real nice strain this one . I’m gonna keep the best 3 oz off this and make some fire feco with the rest for gummies . Should get some nice swelling this week then looking at maybe 3 weeks after that . Dutchfem really makes some mad strains .
Likes
39
Share
Buds fatten Up Everyday .. 😎 Feeding 3-4 Times a day , EC 1.3 Runoff 10-20 % CO2 was reduced to 400 ppm end of Week 6 . Everything goes Well still smelling Like in a Candy Factory 😁
Likes
9
Share
@Headies
Follow
So this week after I gave it under nutrients I apparently gave it too much nitrogen while having a potassium deficiency. Shiney dark leaves, So i fixed that, but some didn't bounce back, and I tried nitrogen. I think they are doing pretty good considering everything I've put them through SO FAR. lol. Nutrients are NPK Raw's total lineup, follow their instructions at first, Fastbuds adjustments as of this week.
Likes
5
Share
@420Hydro
Follow
Clones got flipped before i wanted mom plant was getting to big. Just trying squeeze quick run in before move. Still trying dial in my new nutrient line.. masterblend 0 12 24 and cal nit
Likes
9
Share
@OGbros
Follow
ITA: le piante stanno bene e crescono molto in fretta. Anche la strawberry lemonade è partita a pieno regime. Ho eseguito lst e defoliazione su tutte le piante eccetto per la SL. Da qui a pochi giorni conto di topparle di nuovo ed eseguire un altro lst. Al giorno 27 le piante hanno recuperato e sono state nuovamente toppate ENG: the plants are doing well and growing very fast. The strawberry lemonade has also started at full capacity. I performed lst and defoliation on all plants except SL. In a few days I plan to top them again and perform another lst On day 27 the plants recovered and were topped again
Likes
4
Share
Critical 28 day bloom 🌿 I didn't fertilize this time. ppm 350 2 weeks later overdrive
Likes
226
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/09/21 😿 well they held out as long as they could but 2:3 plants folded like a cheap suit.. a combination of stretch and crazy weight.. these buds are as dense as cucumber lol, even harder that the impossibly dense Critical P's we grew.. I had to invite a friend to give them a squeeze, to ensure there's more than 1 party to this fish tale lmao 😹..long story short the tent is a mess, we staked a few the best we could and made a few mains comfortable to finish on their side..we don't plan to move them until they're finished.. the next run in this tent will have to be aesthetically pleasing to make up for this hideous finish..*balance*..all plants are fading fast after cutting their feed, we're doing water only and they should be fully washed out come harvest ❤️..thanks for reading if you made it this far and happy harvests everyone!!💡🌱 😽💨 Youtube: https://www.youtube.com/watch?v=tZjRQlDaBvM ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/12/21 Buds are swelling and the crystals are really piling on, however the tent is a mess lol...I'm really looking forward to harvesting these plant... trichs are still mostly clear, we definitely have some time left
Likes
36
Share
Welcome back to yet another short update☺️ Transplanted and filled with tender care and love 🤗 A bit colder temperatures then inside the veg tent , but I’m not worried at all🤩 Videos show the process, hope you enjoy 💯💚 See you next week🤩 ------------------------------------------------------------------------------------------ Light source: Medicgrow SpectrumX 880W LED Build in PPFD 4 controllable spectrums V1, F1, VS, FS Visit https://medicgrow.com/ for more informaton. Light measurement: Apogee MQ-610 & Apogee DLI-600. Fertiliser: Organics Nutrients https://www.organicsnutrients.com/en/ Green Buzz Nutrients Discount Code: GD42025 Grants 25% with a minimum Order value at 75 Euro. https://greenbuzzliquids.com/en/shop/
Likes
16
Share
week 2 Established a nice root system in this clone, all ready for transplant. Used some azos on the roots and some in soil. 7/29- Added 250ppm of epsum salt and 250 ppm of calmag to 1 gal of water. Fed maybe 2 cups to the plant.
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Processing
Likes
67
Share
Likes
Comments
Share
Likes
3
Share
This week has been awesome with these ladies! Have moved them to the flowering tent and letting them get acclimated in here. Will prolly do 1 more week then switch to flower for this tent! Have got all 6 ladies all stacked in here all tight together. They are already demanding alot of water so I can see how a drip system might be nice but idk if would work for coco Still doing same 5.6- 5.7 ph declorinated water with a heavy feed. Still doing some training as these girls grow so have more tops as they streach. I maintain about a 60%RH for this room for now and give them ladies about 1400ml every 2 or 3 days. Will do a pre-flower check again in the next couple days should be showing havnt looked much! Fingers crossed!! Much
Likes
27
Share
Today is day 72 from seed!! This week went real well , 2 of the Forbiddin Runtz have been getting flushed an the rest will also start flush through this next week, I can’t believe the smell of this combo strain,, super fruity smelling an all are super sticky!! Stay tuned for next week yall !
Likes
26
Share
Week 6. Im watering every 2 days. Fish shit and mammoth p every 3rd water. Rest just ph'd water. Alot of tricombs on the Purple Punch. Getting fat and juicy. Probably gonna ha4vest the Purple Punches in a week. GMOs finally coming along starting to fatten up and become a bit crystally. They still got 4 weeks or so left.
Likes
170
Share
Week 9 is here. Massive shout to RQS & James for supporting me in this grow. Once again the genetics that RQS have is unbelievable. ✌️ Day 58, buds are fattening up real nice with a very nice smell. I hope to carry on feeding for another 2 weeks then start the flush. I plan to remove some more leafs of the topped plant she is so bushy but full off bud! Water feed repeat for this lady’s for now. Thank you for all the support and love shown during this grow. Have a great week ✌️👊🏻💚🙌
Likes
14
Share
Aloha Freunde der Sonne 😊 Obwohl die Mädels immer noch kein Dünger bekommen haben, geht es Ihnen so gut wie noch nie. Sie fühlen sich mehr als wohl bei mir. Viel Spaß🙏
Likes
42
Share
Last 3 days before HARVEST👨‍🌾 ⛺️ MARSHYDRO 💡VIPARSPECTRA 🍼GREENHOUSE FEEDING BIO GROW 🌱 WEEDSEEDEXPRESS
Likes
34
Share
@Dictator
Follow
I have to dry the buds in the dark, at 21 degrees in 50% humidity 🤘