Se hace defoliación extrema 5 días antes del corte para intentar hacer madurar la planta de forma mas pareja.✌️👨‍🌾🏻

She's looking really good so far and the smell she leaves on your hands after handling her, incredible! Her old fan leaves are dropping off and today is the last day I feed her nutes. It'll just be flushing from now on and checking in on the trichomes every once in a while.

Week 8 (17-3 to 23-3) 17-3 Temps: 17.4 to 21.9 degrees Humidity: 60% to 72% 18-3 Temps: 17.5 to 22.2 degrees Humidity: 54% to 65% 19-3 Temps: 17.9 to 22.4 degrees Humidity: 52% to 61% Watering: Both 500 ml. EC: 0.4 Watering: Both 1000 ml. EC: 1.4 Defoliated both plants and attached some shoots to the rack. 20-3 Temps: 18.2 to 22.8 degrees Humidity: 59% to 69% 21-3 Temps: 18.5 to 23.4 degrees Humidity: 57% to 67% Watering: Both 1000 ml. 22-3 Temps: 19.4 to 24.1 degrees Humidity: 55% to 67% Watering: Both 1000 ml. Set the strength of the light to 50% 23-3 Temps: 19.8 to 24.8 degrees Humidity: 58% to 67% Watering: Both 1000 ml. As you can see, instead of removing the leaves, i tucked down all the leaves to open up the canopy. I will see if i like this method as its the first time i try this. I also attached some more shoots to the rack, its looking nicely spread out now :)

Another good week. Watered them twice. I'm not planning on feeding them again. A little defoliation. I definitely think they are in the last 2 weeks before harvest. Still seeing some nutrient burn developing on the leaves. I don't think I watered enough through the whole grow! I'd love to hear opinions on this! Took some videos of the buds with an iPhone 12 at 6X magnification. Decent quality! Otherwise, still looking to successfully harvest these plants! Thinking about the next grow. Probably going to be Auto Strawberry Cheesecake and Auto Anesthesia. Peace!

October 1, 2021: Looks like I overwatered a bit last weekend. Still trying to get used to these SIP Pots. I'll probably switch to a SIP system using 5 gallon buckets in the near future. I like the concept of SIP systems so I purchased these pots. But I don't like that these pots still require top dress watering instead of filling the reservoir at the bottom directly. On to the ladies... Fast Buds Blackberry- She jumped in height and started pushing out bud sites this week. She's up to 13" tall, which is kinda short, but she has very tightly packed node spacing and is very bushy. Or she was very bushy before I did some defoliation. I did a light defoliation on her this week mainly so I could see what I was doing when giving her a LST bend. I like to bend plants over at a 45 degree angle I find this allows the lower branches to have better access to the lighting and produce better buds all around. Dinafem Critical+- She grew about an inch this week and is up to 20" now. I did some heavy defoliation on her, I got a little carried away once I got started. She is still showing signs of nutrient burn and is also telling me she was overwatered (see above). However the bud sites look great! So I'm not too worried at this point. I also posted a few pics of the plant I grew outdoors this summer. I just cut her down yesterday. I had to harvest a week or two early because we get very damp and cool falls here in New England. I've been going out every morning to shake the moisture off her and look her over closely. Yesterday I found 2 small patches of bud rot on 2 of the larger colas. I cut the bud rot out first, then chopped her down and brought her in for hang drying. I'll be doing another close inspection once she's dried out to make sure there is no bud rot on the remaining buds. Cya next week!

Semana compleja, se me paso la fertilización, por el uso de un producto que no habia usado antes, es muy bueno pero me genero una sobreferti. Bud ingnitor. por lo demas se recuperaron bien. Y en el video se aprecia que realice poda de hojas bajas.

This will be the last week i will Feed. I m keeping TDS at 400PPM and PH at 5.8. This week I took out the Silica Blast, Great White and also stoped the CO2. Also I lowered the water temp to 66 degrees. Lights on temp is between 75 and 80 degrees, lights off between 65 and 72. I’m trying to keep humidity as low as possible around 45% week 10 will be flush week.

Sorpreso dalla ripresa, pensavo ormai era andata male, invece aoutdoor con il nostro clima da sempre soddisfazioni.

Очень липкие цветы, при дефолиации ножницы склеиваются после 5 листика, местами начала сочится гуттация. Запах на столько сильный что весь дом пропитан уже этим ароматом терпенов. Неделя промывки и Харвест как же долго я её жду, честно говоря уже устал

Nach dem Entlauben und Bewässern ist sie wieder voll da. Die Wurzeln ziehen du Nährstoffe gut auf. Habe sie mit Hesi nachgedüngt. Mineralischer Dünger. Cal Mag von Bio Bizz.

I cant believe how big these f1 are getting double the size of my biggest auto budding along nicely now I have smaller girls in the corners couldn't wait to start more sweet seeds have so much to choose from I'm going be busy for a while witch makes me happy

Wow! 303 grams dry weight off these two girls, thanks to a higher feeding each week. Absolutely blown away by how much more weight, size of the buds and the insane stickiness of the buds! Extremely happy even though this strain was the most difficult I've ever grown.

Semana 4 de flora están a full mis plantitas. Creciendo cada día más y más. Sanitas.

Max 3 Pflanzen

**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8

Another grow that has come to an end. I loved it, Simple and quick, i recommend it. It has started to dry. It will take between 10 and 14 data. Thanks!

Hey everyone 😃. On 09/10/20 she was placed in the flower tent at 12/12 h 😀. You have developed incredibly well with the Green Buzz Liquid Nutrients 👍. I am very curious how it will develop in the coming week. Until then, I wish you all a good time and stay healthy 🙏🏻. You can buy this Strain at https://www.amsterdamgenetics.com/product/kosher-tangie-kush/ You can buy this Nutrients at https://greenbuzzliquids.com/ Type: Kosher Tangie Kush ☝️🏼 Genetics: Kosher Kush X Tangie 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green Buzz Liquids : Organic Grow Liquid Organic Bloom Liquid Organic more PK More Roots Fast Buds Humic Acid Plus Growzyme Big Fruits Clean Fruits Cal / Mag Organic Ph - Pulver ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 - 0.4 EC. Add Cal / Mag 2 ml per l water every 2 waterings . Ph with Organic Ph - Pulver to 5.8 .