Likes
Comments
Share
@Vet_J
Follow
Everything is going great again I started looking at the trichomes under a microscope. On some buds, 90% of the trichomes are clear and 10% are milky to amber On other buds, 80% are clear milky and 20% are milky to amber I think I'll wait another week or so before flushing. The soil pH has stabilized at 6.5 pH and the TDS is 1000-1100 ppm The smell is already quite strong. If I turn off the fan for even 5 minutes, the whole house stinks I think it would have been better to defoliate more aggressively than the last time, but it doesn't make sense now. I don't want to put too much stress on the plant so that all its energy goes into hardening and forming buds. Let's see how it turns out.
Likes
4
Share
@fridge
Follow
end of week 6 flower day 57 after germ | what should i say | insane pheno | the buds look surreal | the pictures speak for themself | one of the best looking plants i ever had | 100% gonna grow this again |
Likes
10
Share
Day 1 Today is the first day of flower here we go doing a water changer in 2 or 3 days will set it to 900 or so can't wait to see the first buds on my girls a lot of love in this grow Day 2 Ppm at 450 now time to change out tomorrow Day 3 have a five gallon bucket at 1500 PPM to add back during this week is the reservoir gets low. ppm's are at 1150 with a fresh change of all the water we'll see how she's doing tomorrow Day 4 had a major disaster last night went in to check everything and have an inch of water inside of the tentnot too much water drain from the pots that the roots got dry but it did sprung a leak when I change the water out I filled the buckets too high so my sealed job broke had to think on my feet put the 4 plants into DiY dwc buckets I built with their bubble inside no way of maintaining the temperature in there going to have to get some kind of a new epoxy and hopefully have the system up and running tomorrow. Day 5 all is well with the grow again completely cleaned out the system and all the buckets put the new epoxy on there and everything is leak free did another exchange what the plants back to their original pots with a slight adjustment to the placement I hope the stress of moving the girls is not going to affect my yields too much it is only day five of flower hopefully everything's smooth sailing from here on out P.s had to add the 5-gallon of 1500 PPM nute solution to the reservoir to get everything at the proper level along with some extra Cal mag and a small amount of the other nutes the PPM in the system is now at 740 Day 6 happy to say not much to report lol everything looks good 🙂 Day 7 week over
Likes
71
Share
Hello, friends! It's been an exciting second week of flowering in the Anesia run, and I can't wait to share all the amazing progress with you. Our lovely ladies are well into their flowering stage, and the changes are spectacular! The transition from vegetative growth to blooming is always thrilling, and this week has been no exception. We've adjusted the nutrient mix to support their flowering needs. Here’s what’s been on the menu: Regulator: Keeps plants stress-free and promotes healthy growth. CalMag Boost: Ensures they get enough calcium and magnesium for robust bud development. Top Booster: Enhances flower production and increases the number of bud sites. P Boost: Provides the phosphorus needed for energy transfer and flowering. Watering pH: Maintained at 5.8 to ensure optimal nutrient uptake. TDS: Held steady at 420, giving them the perfect balance of nutrients. The Anesia Beauties 🌟 Each plant is showing unique characteristics, and it's fascinating to watch them develop their own personalities. The buds are starting to form nicely, and the aroma is beginning to fill the air. Future #1: This strain is living up to its hype, with dense bud formation and a vibrant green color. Zoomiez: Looking strong with vigorous growth and promising flower sites. Apricot Oreo: Developing beautifully with a sweet fragrance that’s already noticeable. Red Banana Pudding: The solo survivor is a true champion, showing great resilience and structure. Training Techniques This week, I focused on some light defoliation and training to ensure optimal light penetration and air circulation. These techniques are crucial for maximizing yield and preventing mold or mildew. Maintaining the perfect environment is key. Temperature is kept at a steady 25°C, ensuring the plants are comfortable and stress-free. Humidity levels are carefully monitored to avoid any issues during the flowering stage. I've captured some stunning shots of the girls in full bloom, which I'll be sharing on Instagram. The sight of those trichome-covered buds is truly a feast for the eyes. A huge thank you to: Anesia Seeds for these amazing genetics. Aptus Holland for providing top-notch organic nutrients. Future of Grow LED for the incredible lighting that keeps our garden thriving. Grow Diaries for the platform to document and share our journey. The Grow Diaries Community for your constant support and inspiration. Stay tuned for more updates, and don’t forget to check out the latest episode of Welcome to the Green Oasis on YouTube, where I dive deeper into the garden's progress and share more tips and tricks. Keep growing, keep glowing! Genetics Red Banana Pudding = RBP Apricot Oreoz = AO Zoomiez = Z Future#1 = F https://anesiaseeds.com/ Plant nutrition - Aptus Holland - https://aptus-holland.com LED Photons - Future of Grow - https://www.thefuturofgrow.com/ Controls - Trol Master - https://www.trolmaster.eu/ Watering - Autopot - https://autopot.co.uk/ Tent - Mars Hydro - https://marshydro.eu/ Love and attention - Me, myself and i As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and blessed with you all in my life, With true love comes happiness. Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so More info, the ocasional give-away and exclusive updates from all my adventures can be found - links in the profile description Friendly reminder all you see here is pure research and for educational purposes only Growers Love To you Al
Processing
Likes
6
Share
final week of feed before flush. show plants height outside tent shots as well. humidity randomly dropped to 20's which im happy with at end of flower as i hear increases potency and resin production. smell starting to come thru door of tent. but not out the exhaust (carbon filtered)
Processing
Likes
39
Share
The plants are doing well except for an issue with small rust coloured spots. According the 'The Plant Doctor', the best guess is a calcium deficiency. Increasing CalMag didn't work. Going to try raising the PH up to between 6.2 - 6.4 and see if that makes a difference. (Best absorption PH). Sometimes excess potassium can cause the same symptoms. If raising the PH doesn't work, I'll try knocking back the bloom levels.
Likes
Comments
Share
@lolasher
Follow
Die zehnte Woche ist rum. Die buds sind immer noch ordentlich am wachsen und bilden vuele neue Blütenstände. Die vom Hersteller angegebene Lebensdauer ist erreicht, aber optisch dürfen da noch einige Wochen folgen. Hab auch noch keine Trichome gecheckt. Der Plan ist der Folgende: Wissend, dass bei dieser Blütemenge Schimmel ein großes Risiko sein wird, möchte ich sie eigentlich noch mindestens zwei Wochen behalten. Sobald ich Schimmel irgendwo erkennen kann, wird umgehauen. Auch wenn die Blüten dann vermutlich noch nicht voll entwickelt sind. Ich wohne im Norden an der holländischen Grenze im Moorgebiet. Die RLF hier ist hier - selbst bei diesen jetzigen, trockenen Bedingungen- selten unter 60 %. Nachts immer zwischen 80 und 90 (es ist hier super trocken aktuell). Aber wer weiß… vielleicht Sorge ich mich auch zu unrecht und sie steht noch nen Monat.
Likes
53
Share
@AutoCrazy
Follow
This lady seems to be heading into flowering. She is throwing out pistils like crazy. I did some major defoliation. I likely will be leaving her alone from now on chances are. 😎🍿🍻🌱
Processing
Likes
55
Share
@Max1973
Follow
Day 29 - Things going along nicely .... i trimmed down some of the bigger bottom leaves, i didn't have enough soil to fill the pots, and the plants are short, bushy, weird little things, that filled out the inside of the pots..... they are only 15cm tall, but the leaves are 10+ cm .... really weird little plants.... haha.... i decided to trim the fk out of one of the ones in the double pot, and practiced topping on her.... i'll cut her down maybe trimmer her of the pot, and focus on just the 2........ they seem to be still growing upwards, so i'm not in a hurry to put em into flower mode......... on the main one i noticed some neut deficiencies ... so i upped the neuts.... should be ok, i put a good heavy neut and it stopped the spots etc..... i think some bug or something got in the double pot and is livin in there, but he doesn't eat much, haha....... the main stalks are as big as my thumb and under each canopy is all the branches..... it's really strange, to go in under all the growth and see it all .... they look kinda small, but the entire under canopy of leaves is all full .... i'm moving the huge sized leaves out and pulling each branch up over them as they grow..... this is 21 THC and 19 CBD, so it's all the good stuff for medicine ... the smell is getting abit noticable and i'm hoping the exhaust fan arrives from china soon.... just got positive ventilation into a carbon fil. ... and daily air out........ i think i had the led lights too low..... so i'll raise em abit more and see if i can get em to stretch .... Day 30 -- added some video's...... daylight vids... worth watchin for a laugh ...... first grow, so idk what i'm doin, ... any help/comments appreciated Day 32 -- added some pics of the late night trim and LST,... idk looks ok.... Day 34 -- added a video...
Processing
Likes
17
Share
On Tuesday last week I burned my plants, particularly #1. Everything was going very well so I thought I'd add a little more nutrients to get some bigger blooms. That was a mistake! I flushed them with just tap water and trimmed off the leaves that were badly burned. Yesterday the plants were looking much better and I introduced a fraction of the nutrients that I was feeding them before. Plant #2 is starting to get covered in trichomes though there aren't any on #1. With a jeweler's magnifying glass and my phone I did my best to take pics of #2's trichomes. It's not so easy to see in the pictures but in person they all look clear. I'll wait until they're all cloudy and some are amber to chop it down.
Likes
3
Share
Sehr schöner gleichmäßiger Wuchs. Ich habe die Pflanze durch Supercropping auf ein relative homogenes Level gebracht und ich muss sagen. Es funktioniert einwandfrei. Außerdem habe ich die Haupttriebe mit Kunststoffbögen fixiert um weiteres abknicken zu verhindern.
Likes
6
Share
This week was a real breeze! She's gaining a ton of weight on the bud sites and she's really growing nicely! She's starting to bud around the flowering sites and really finishing nicely. The formation of bracks and the formation of the buds is my favorite part because that's when you get to see somewhat of the final picture and the time the flower is most colorful! Now the second best part is harvesting the flower for smoking which will be occuring soon! The smell on these girls is very invigorating!! She's putting out a smell of a Lemon Cherry Now n Later! You can smell the Lemon and Cherry right away when you open up the tent! I can't believe how big she's got and how beautiful they are coming along! I have to say that this is one of my favorites to grow and my favorite smelling strain! I also love the way the flowers are stacking on the colas!!! The frost on top of the cola leaves is insane! During the day I drop the humidity down to 45-50% and then at night I raise the humidity up to 60-65% which helps a ton with flower promotion during the flowering stage! Also, I raise the temperature during the day to 80° and at night I lower the temperature to 55°-60° which helps mimic the autumn temperatures that aids a ton in flower production in the flowering stage!!! I'll be stopping the two Lemon Cherry Cookies Auto's from receiving any synthetic nutrients and flushing them now since harvest will be within the next two weeks or so! I'm doing that because they stop taking nutrients in and start to self canabulize as a normal (ending) part of plant life. Then I'll give the two ladies plain pH balanced H20 for the next 2 weeks to flush any and all nutrients out of them. Then three days of darkness. Finally I'll chop them down to hang in my harvesting closet for 7-14 days with a dehumidifier on at 65% humidity. Then I'll place the flower into the trimmer and then into the grove bags for the last step in harvesting! The grove bags will keep the flower at 58-62% humidity. They also help keep the flower fresh longer, the Terpenes fresh, the Terpenes flavors, and from becoming moldy or dried out! I've used both these and the mason jars with boveda humidity packs but to me the grove bags are a must and a go to fail safe!!! All you do is hang your buds upside down at 60/60 or 65/60 for 7-10 days or until the braches snap and make that noise. Thanks and as always stay safe, stay high, and stay blessed!
Likes
25
Share
@DrGanj
Follow
Started flush now. I'm adding Nature Delight Active Sugar Boost as it's been recommended to boost terpene production. No idea if it will work this late into flower but trying anyway as apparently it has no need to be flushed and is fully organic.
Likes
1
Share
Copper Cathode Plates & Zinc Anode Plates Not all minds think the same, it's a hard concept to grasp from one who has only ego. When someone operates solely from the ego, they tend to view their own perspective as the objective truth. To them, if someone else thinks differently, it is seen as a flaw, a lack of intelligence, or a personal affront, rather than simply a different, valid experience. The ego assumes that others are just extensions of itself. It cannot easily differentiate between "I think this" and "This is the universal truth". This is called the Mirror Fallacy. True understanding of another mind requires stepping out of oneself. The ego, by definition, is obsessed with self-preservation and being "right," which blocks empathy. Different perspectives are interpreted as attacks on the ego's stability. Instead of curiosity, it feels defensive. Acknowledging that others have entirely different internal worlds—with unique motivations, fears, and histories—requires dismantling the illusion that the world revolves around one’s own viewpoint. It’s a shift from "Why are they wrong?" to "How did they get to that perspective?" Gospel of Thomas #17 "I shall give you what no eye has seen, what no ear has heard, and no hand has touched, and what has not come into the human heart." precedes saying #18, which questions the "beginning" and "end". First, you need The Eyes to See, The Ears to Hear & The Mind of the Heart. "Alpha to omega" refers to the first (Α/α) and last (Ω/ω) letters of the Greek alphabet, symbolizing "the beginning and the end". It represents totality, eternity, or the entirety of something. Revelation 22:13, "I am the Alpha and the Omega, the First and the Last, the Beginning and the End" (NKJV, NIV). Alpha & Atom: Both originate from Greek. Alpha (Α/α) is the first letter of the Greek alphabet (representing the beginning). Atom comes from atomos, meaning "indivisible," often seen as the foundational "first" particle of matter. Adam & Atom: In some esoteric and linguistic theories, the biblical name "Adam" (Hebrew for man/earth) is connected to "atom" because both represent the original, foundational unit (the first man vs. the first particle). Alpha Particles are particles emitted during radioactive decay, named "alpha" because they were the first type of nuclear radiation discovered. They are atomic nuclei consisting of two protons and two neutrons. The study of the atom often deals with the "beginning" (alpha) of chemical reactions and fundamental building blocks. The terms are linked primarily as symbols for "the beginning" (Alpha), the "fundamental unit" (Atom), and the "original man" (Adam). The uppercase symbol Omega (Ω/ω) is primarily used in electronics and physics to measure electrical resistance in ohms, representing how materials resist electron flow. It is also used in various fields to represent the density parameter in cosmology, solid angles in physics, and special constants or asymptotic growth rates in mathematics. In quantum mechanics, "Omega" (Ω/ω) can refer to several concepts related to measuring or representing quantum coherence, generally categorized into dynamical, mathematical, or physical parameters: Dynamical Coherence Measures Omega Pattern (Superconducting Circuits) Coupling Strength Angular Frequency Quantum Coherence Framework (Omega v24.0) Electron flow is not the same as electrical conductivity, but they are intimately related. Electron flow is the physical motion of electrons, while electrical conductivity is the material property that determines how easily that flow can happen. Electron Flow (The "What"): The physical movement of negatively charged electrons through a conductor (usually from negative to positive). It is the act of carrying charge. Electrical Conductivity (The "How Well"): An intrinsic material property that measures how easily a material allows electrons (or other charge carriers) to move through it. Electron Flow (The Action): The actual physical movement of electrons from one molecule (donor) to another (acceptor) in a pathway, such as the photosynthetic electron transport chain or cellular respiration. The current itself (dynamic electricity). Electrical Conductivity (The Property): An intrinsic property of a material (like copper vs. glass) that measures how easily it allows electric current (electron flow) to pass through it. A measure of ease. A high-conductivity material has low resistance and lets electrons move freely. Electron transport rate (ETR), the rate at which electrons travel through the chain. You can have Electron Flow occurring (electrons moving through the chain), but a very low Electron Transport Rate if the plant is in the shade. If light increases, the Electron Flow still follows the same path, but the Electron Transport Rate increases because more electrons are moving per second. In summary, ETR is a quantitative measure of electron flow. The Electron Transport Rate (ETR) is not exactly the same as Electron Flow, although they are intimately related. Think of "Electron Flow" as the movement itself, and "Electron Transport Rate" as the speed or quantity of that movement. Photosystem II (PSII) is a critical multi-subunit protein complex in thylakoid membranes that initiates photosynthetic light reactions by splitting water and transferring electrons. "Et lux in tenebris lucet, et tenebrae eam non comprehenderunt,"
Likes
1
Share
@Randomjcb
Follow
Stoped the pk its done its job and the strech on the flower sites has gone well
Likes
21
Share
@The_La
Follow
This week I changed a few elements, I changed my nutes to mills, I used mills on my last grow and had a really good result, I also like the fact that's it takes 1 week to flush, this is because it is made of organic and inorganic compounds and contains less salts. The only reason I didn't go with mills from the start was purely financial, canna is cheaper and doesn't require the expensive "start" additive like mills. The guy in my local shop swears by mills and gave me a bottle of c4 for free so I switched. I also added a greenhouse tube heater as my lights off temp was dropping to around 6c. I'm at 12c now and can live with that. My flowers are forming nicely with small spacing in between each node and I have been bending the branches down to encourage growth. This is going as planned and I'm loving this run 👊
Processing
Likes
6
Share
This beautiful lady smells very strong,I swear I can't believe it's her 15th day of flower since I forced flower on August 3rd,smells just like OG kush but with a different tone of sweetness. Love this strain to pieces. On August 24th starts the 3rd week of flower 🌸🌱.
Processing
Likes
14
Share
My plants are looking great! The flowers are beginning to show more colour, and the leaves are starting to yellow. Gave them their last feeding the past week. From now on, only distilled water, if possible. The spider mite issue is relatively under control, although they did invade two flower tops. I destroyed the webs with my garlic spray. Spraying them once a week now with the garlic concoction, and if possible, won't spray them in the last week. Checked on the trichomes with my pocket microscope. Getting cloudy. I have relatively warm temperatures in my tent, will look on getting a small portable cooler unit.😎