Welcome back guys, This time bigger and different! For this time I'm going back to the basics and i will be using 240 Amnesia Haze clones! I start with the old 3 liter pots and they will be repotted into 7 liters, there was no space to have them in 11 liters in the upcomming weeks. The grow Medium is special lightmix soil from the growshop( it has like ph 5.8-6 with ec 1-1,2 in it). Beneeth the soil i putted Expanded Clay so the water will go out more easily. I have got 12 x 600 watt HID lamps in there, but for now I am just using a few. I'm very busy at the moment so my growroom isn't finished yet. This is only half of it. I had to start because those clones, which i have orderd, where deliverd lol. So there was no time left. The lamps are high at the moment because the clones need time to root. If you have your lamps to low when just planted your clones, your clones will dry out and die. They need to settle first for a few days. Day 7: All went well. I do have a ''bad'' corner. Thoose plants are strugling to develope. Nothing mayor, it is normal with this many plants that some clones doesn't root and grow properly. Next week i will decide which one I keep and which I throw away because I don't like to make two schedules, feeding buckets and more, just for a few weaker plants lol. The lamps are at 60-70cm from the canatopy. Some preff it higher and only at that range when flowering. But I want to have it like this because I want strong stems, more bushy plants instead of weak stems and long ugly anoying plants that produce fluffy buds. These sativas love to stretch and grow big, I personally don't like that, so I try to force strong stem and bush growth. Also increasing a bit in Aptus Regulator might force it as well. I did sprayed them with Canna Cure as well, to prefend against all kinds of stuff and give them a little feeding via the leafs. Currently still to busy in real life. Hopefully I finish my full grow room in the upcomming days, spread the plants and maybe even repot them into bigger ones. The rooting and growing proces goes well. They must go a bit larger untill I force them into flowering. See you guys next week.

STRAIN DETAILS: RUNTZ (ZAMNESIA SEEDS) FEMINIZED DATA SHEET Brand Zamnesia Seeds Genetics 50% Indica / 50% Sativa Parents Gelato x Zkittlez Flowering Time 8-9 weeks THC 27% CBD <1% Yield (Indoor) 450-500 gr/m² Yield (Outdoor) 400-450 gr/plant Height (Indoor) 130cm Height (Outdoor) 180cm Available as Feminized seeds Flowering Type Photoperiod Sex Feminized _____________WHAT I AM USING_____________ -LIGHTS: Quantum board - 480w - 4x120w Boards by Zhoangshan Koray Opto-Electronic Ltd. Samsung LM301B 288 led/board +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B temperature: 3000k Heat dissipator board: No Noise: 0dB Quantum board - 240w - 2x120w Boards by Shenzen Yuanhui Led Ltd. Samsung LM301H 504 led +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B temperature: 3500k Heat dissipator board: YES 15MM Noise: 0dB -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Power: 42-50W RPM: 1940-2620 minimum -1 Maximum air flow: 430-560 m³ / h Sound pressure level at 3 m: 32-44 dBA -FANS: A)OSCILLATING FAN Maximum consumption: 20 W Minimum consumption: 17 W Fan diameter: 15 cm Housing diameter: 20 cm Height with handle: 35 cm 2100 revolutions per minute Two speeds B) COMPUTER FAN Sunon DP200A - 230V Nominal power: 22/21 Watt Noise level: 44 / 49dB (A) Rated speed: 2700/3100 RPM ± 10% Air delivery: 95/115 CFM C)Cornawall Electronics Multifan Turbo, three speeds, can be used both on support surfaces and mounted on the wall. High capacity, about 740 m3 / h, can be used in medium-sized rooms. High silence and reliability make it adaptable and versatile. Technical details: Rotation range of 90 degrees Tilt adjustment Three speeds of rotation Suitable for wall and ceiling suspension Power Consumption: 35 Watts Air Flow: Approx. 740 mc / h Operating noise: approx. 39 db Diameter: 20 cm Voltage: 220-240V Frequency: 50Hz Dimensions: L 28 x D 16 x H 28 cm FERTILIZERS: MAIN FERTILIZER BRAND: TOP CROP I use these products: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for a excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: cAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies ____________________________________________________________________________________________ <3 Thank you for being here <3 Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, please, tap the weed button and follow us. It will be really appreciated. Thank you again Sweet hugs CHILLING_RACOONS

This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......

Week 2 of flower for these girls. I decided to use a lesser dose of nutes because I noticed after a few days after my feed last week that there may have been some leaf burn. -I changed up the nutrients a little and also finished putting up my inline fan - pulling fresh air from outside in for CO2. I simply used ducts for it. Now that cooler air is coming in from outside I can slowly turn up my lights to 900 watts, I’ll see how they do in about a day or 2 more and then the lights will switch to 1000watts. -Did some more defoliation. The leaves grow so fast!! Took 2 days to do all my plants lol I’m trying to do it every week or other week -The plants are drinking a lot more than they used to, I’m now feeding water every second day and nutes every second day! They’re growing so fast before my eyes It’s such a cool feeling seeing all my hard work coming along, with the first buds popping up and looking like real weed now. Feeling motivated! 😇

Vom Platz her passt es bis jetzt. Bin gespannt wie viel Raum sie noch einnehmen wird. Läuft sehr gut, bin zufrieden.. Die buds nehmen auch langsam Struktur an und bekommen mehr Fülle.

We are in Flush !! Was giving them GH Flora series + rapid start + cal mag

The canopy has spread out nicely, and I’ll be moving to 12/12 any day now. The structure looks balanced, and we’re close to that ideal fill before the stretch kicks in. The single Critical Mass plant is still a bit limey in colour, but I won’t wait for it to fully even out. The fresh growth looks healthy, which is what matters most at this stage. Now it’s time to flip and let them show what they’ve got. Stats so far: 💧 Watering: Every third day 🌡️ Temp: 26–28°C 💦 Humidity: 65% RH 📈 VPD: ~1.18 kPa 💡 Light: ~600 PPFD

Die Woche war sehr gut, ich habe am 21.7. Entlaubt und das hat den Pflanzen sehr gut getahn erst recht die genetisch fehlerhaften Pflanzen haben das gut angenommen. Dann habe ich das erste mal gedüngt, weniger als hersteller Angaben und mit Madame Grows pre flower booster mal sehen was der kann wird 2 bis 3 mal in der vor Blüte benutzt...mal sehen😎 The week was very good, I have on 21.7. And that has done the plants very well, especially the genetically defective plants have accepted this well. Then I fertilized the first time, less than manufacturer information and with Madame Grows pre flower booster let's see what it can be used 2 to 3 times in the pre-flower... let's see😎

She is growing safety and healthy...

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Had some nutrient issues but fine all in all. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Set up cost (fixed costs) -Lamp: 40€ -Timer: 3,5€ -Pot: 4€ -Total fixed costs: 47,5€ Given 5 years (or 15 grows) usage time translates to around 3,17€ per grow in materials. Variable costs: -Seed: 5,54€ -Soil: 4,5€ -Fertilizer: 3,50€ -Power : 19,52€ -Total variable costs: 33,06€ -Total costs per grow: 36,23€ -Total cost per gram: 2,19€

Slowly slowly catchy monkey 😂 looking good for its final week, pistils are now starting to change colour. Fox tail is still present but not too bad. This week will be the time for the snip following magnesium deficiency and a flush of 0 ppm water via 7 stage filter.

Today is day 10 of flower, and this girl is stretchin as she should... this grow has been flawless from the second I dropped the seed in the medium.. Great vigor all she wants to do is grow .. i love Maxibloom...Zamnesia Seeds is 2 for 2 i think.. The watermelon candy turned out to be a banger, and this Sundae Driver 🍨 is looking like she's gonna be the same. She has a smell coming from her already, and there's not even a bract in site.. Thank you to everybody stopping by given a like in saying hi, I hope and pray everybody's doing well. And as always thank you to Zamnesia Seeds for sponsoring this grow.. definitely check them out.. God bless everybody and happy growing ✌️https://www.zamnesia.com/us/35-cannabis-seeds/368-zamnesia-seeds

Just started the beans

💩Holy Crap Growmies We Are Back💩 Code Name FBT2307 Well growmies we are at 21 days in and everything is going great 👌 👉 Started to do some light low stress training and its looking good 👈 We got , some Pre-flower showing already 👌Let the stretch begin 💪 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

---GENERAL COMMENT--- Girls are at day 4 technically, but i like to update Sunday always, so keep that in mind, is 1/2 a week now. From germination to soil emerging took 3-4 days, no issues at all. 100% germination rate from multiple breeders till now. I will try my best to do a stress free grow again, so will grow mainly naturally. ---RQS EASY BUD--- Ironically the Easy bud is developing better and growing faster than her sister. ---DAY 10 UPDATE--- Over some days she got volume, just started to use RECHARGE, and wow, that thing works, 48H you could tell something is different, since watering with it the stem is thicker and is growing more vigorous, lets see how it will impact overall! ---DAY 14 UPDATE. WEEK 2 FINAL--- This is the last day of this week and this girl is absolutely amazing, she grew a lot, showing already the intension of shooting up more stems, i'm very happy with her, it has been a delight to grow, response in very good. Voodoo juice is of by now, will keep the recharge maintenance every other watering as i'm loving it. Feeding program will start soon!

This plant is taking well to the training and im in love! Lets see how rapidly she grows within the next week or so!!! Lets go papaya

D64/F20 - 03/06/23 - The situation is under control now. I'm going to change water asap (maybe tonight) D65/F21 - 04/06/23 - 👉 Water changed, some hours without nutes... D66/F22 - 05/06/23 - EC 0.8 ph 7.0 D67/F23 - 06/06/23 - EC 0.8 ph 7.3 - added pH- D68/F24 - 07/06/23 - Added water and nutes EC 0.9 and pH 6.3 D69/F25 - 08/06/23 - EC 0.9 and pH 6.3 D70/F26 - 09/06/23 - Added water and Calmag, Connoisseur Bloom A-B. Added pH-. EC 1.0 and pH 5.5

Sind in der 8ten Woche aktuell, am Donnerstag den 30.10 wurde die Ladys großzügig entlaubt. Bin sehr gehyped jetzt auf den Endspurt.

I love this strain to pieces man! Another high quality genetic by original sensible seeds, very very hard dense nuggets like rocks, sticky, stinky as hell, high quality, as always by original sensible seeds. 100% organic grown