Fat and sticky....

Well they definitely made progress in the flowering dept over the weekend! I came back home to find a nice amount of bud sites and pistil growth all around. Bubba ya gotten so big it can’t fit under my lights in the tent with fan & filter, so it’s now been moved to the other tent. Kind of fucks with my auto grow I had planned, but not much I can do

Nice purps.

This was a very easy strain to grow and she took very well to LST. I thought she may have been stunted early on due to have to much power on the light but once it was dialed down and found where she liked it, she took off. I had no deficiencies along the way and she produced some pretty fat and dense buds. To me, she’s putting out a pretty potent earthy citrus smell and looking forward to getting her into curing jars in the next 7-10 days to really bring her smell out. Overall for growth and being able to harvest at around 70 days, I give this girl a 10 out of 10 and we’ll see about the smoke report in the next week or two.

_____ Week 11 | Day 78 - 84 | 4th week of Flower ______ Day 78 & 79🌞 - What should I write... Not much has happened, I leave the plants alone. - I put my dehumidifier in the tent this week, it starts as soon as the LF rises above 60%. At the moment it is winter with me and the humidity is very low anyway, saves energy Day 80 🌞💧 - each plant 3 liter Day 83 🌞💧 - at the end of week 4 I provided them with nutrients again. They have become thirstier and now drink 3 liters every 3 days ____________________________________________________________________________________________ Light - 12/12 h - 560 Watt - 2x 200 Watt Toplight - 4 x 40 Watt Lightbars PPFD - 900 - 1000 µmol Temp. avg. - 24,4° Hum. avg. - 58 % RLH

Day 50. Was insane busy, so weak updates ... Next week will be most of plants shown in separate photos. Girls are happy, I am not ;))) some are almost at harvest and one still haven't started to flower ... Happy Growing !!!

3/18/25 beautiful plant i need to take clones so i dont lose these genetics 3/22/25 i have taken clones 🤙 this plant has super long and wispy type pistils. shes starting to look like shes going to produce nicely and im excited about that. This week we fed her with even amounts of bloom and grow. i am keeping the vpd around 1.4-1.6 kpa this is resulting in 79-82°F and 55-60%

Dispite the bad air and heat that she took.. she is starting to recover... I hope she heals... She has started to produce some flowers... fingers crossed.. 🙏

Floração das plantas está linda As sementes da 420 Fast Buds nunca decepcionam. São 3 plantas em um vaso air pot e uma num vaso de feltro.

1st week of 12/12, very thirsty

😎 Weekly Update: The plant has growth to 70cm height at day 36 :) 🔪 Most of defoliation and lollipoping has been done - trying not to stress the auto too much. 🌹 LST Update: I do branch a day - so I began 5 branches training by now. Weekly thought 💭 : I think I do not know much about auto's - considering to do some HST, the upper leaves are really big, watery and makes a lot of shade. I took very little off. Do you think its ok to remove them all? 😮 Day 38 Update: She has grown 10cm / 4" in 48 hours. I hope she’s done stretching because I have no power left to lift my lights every other day 😷 Day 36: 69Cm/27.1" ---> Day 38: 79.5 Cm/31.3" 💥 🥊 First cloning attempt ever seem to be a success :) P.s She drinks almost a gallon per day - never seen anything like that before. Luckily I am using DWC otherwise I would never dare to water one gallon every day. See you next week - Stay tuned 💥 😝

It was not a sight I was expecting so soon lol…rain fell last night her buds got soaked and the wind picks up you already know what happened after.

I got a new, bigger light. The old one just didn't seem to be doing much at 25w. This new one is 150w. Been keeping up the same feeding. Every feeding is 200ml. Every other one has 5ml of the grow big. Now that it seems to be at flowering stage, I'll be moving onto big bloom for nutrients next feeding. Staying at the same 5ml. I hear with plants less is more. I'd say I'm watering plant two every three days. Plant one has miracle grow in it. So I water it maybe once a week. The m.g. retains water for a very long time.

It's finally here 😀. Both phenotypes are in the fermentation phase 😍. The grow was a lot of fun, so I thought I'd make an Iolator hash out of leaves and a little bud and a little oil out of both phenotype buds. Cannabis: The grow: Both grew beautifully. Your stretch was normal and it didn't cause any problems. Feeding : You received GHSC bio Grow once in the vegi phase and GHSC Bio bloom twice in the flowering phase. GHSC enhancers were added every 2 weeks. That was just the right amount for both : 1:. Optic: The appearance of Phenotype 1 is almost completely purple 😍. Pheno 2 is coated a bit purple with a mixture of silver from the resin :-). Smell / taste Pheno 1 tastes very fruity. You can really say that it tastes like a tangerine in the finish : 1:. Pheno 2 also tastes a little fruity but with its distinctly stronger note in the Kush direction. Both very tasty : 1:. Storage: The cannabis is stored in glasses in a dark place where the temperature is between 19-22 degrees. The first 2 months of fermentation are boveda packs 62% in the jars. Then the 58% come in. Since I was in the mood for a few specialties again, as mentioned above, I also made Hash Oil and Ice Oilator hash. Let's start with Video 1 (BHO) Hash Oil production: Hash Oil: Process: Small grated cannabis goes into the Dexso tube. Below is a container in the PTFE film that serves as a base so that the oil can be easily removed at the end. At the top we give the Dexso gas through the Dexso tube filled with cannabis. The result is a mixture of the gas and the cannabis oil. We put the bowl with the mixture in a hot shot of water but make sure that no water comes in at the top. We let the whole thing simmer for 20 minutes so that the first gases can evaporate. Then everything goes into the vacuum chamber so that all remaining vapors can really escape and we have a pure product 😁. The whole thing is carried out for 2-3 days until the oil is ready 😀. I can only recommend everyone to vaporize oil in a dabbing rig 😍. Taste: The taste is extremely delicious. In the finish, it tastes much more like mandarin than the buds 😀. Optic: The oil is very shiny to matt. If you pull it apart, it becomes light as honey :-). If you roll it up, it's very conceit. Consistency: The oil will become a little harder in the silicone storage after a short time. However, if you take it in your hand, it can be pulled and kneaded very easily after a few seconds. That was it with the oil production. So let's continue with the Ice o Lator 😀. Making the Ice o Lator: I took all the remains of the leaves and placed them in the small net. Then the IO maker is first made about 1/3 full of cold water with water. I add 3-4 kg of ice cubes and wait about 15 minutes until the water is below 0 degrees. As soon as the temperature is reached, I put in the net with the leftovers and set the timer to 15 / on and 10 / off. I run the whole thing 3 times. Then the complete broth is passed through the sieves (160, 120, 73 and 25) in a bucket. After sifting everything is spread out on a ceramic plate and poked very small with a knife. The whole thing comes in a dark place and is then allowed to dry for about 3-4 days. As soon as the hash has dried, it comes into the press for a few hours at a little temperature. The result is a kneading oily Ice o Lator 😍😍😍. Optic: The optic is partly reminiscent of that of oil :-). Consistency: The ice o lator has a very soft consistency :-). You can roll up small sausages while smoking 😁. Taste: The taste is very medicinal. But very earthy and smoky finish : 1:. All the screenings are very good but the 25 and 73 are the best 😃. That was it with the production to see everything again in Video 2. So we come to the end of a beautiful passage ☺️. Finally, I would like to say that I would like to thank Sweet Seeds for the sponsorship and for providing two such great genetics 🙏🏻. If anyone has any questions about this type, oil or ice, I will answer as soon as I can. I wish you all a lot of fun with this big update :-). Have a nice start to you and your families into the new year and everyone stays healthy 🙏🏻. Let it grow 🍀 MadeInGermany You can buy this Strain at : https://sweetseeds.es/de/red-mandarine-f1-fast-version/ Type: Red Mandarine F1 Fast Version ☝️🏼 Genetics: Red Poison Auto®️ (SWS39) X Tangie (California Orange x Hybrid Skunk) : 1: Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Ich kenne mich hier nicht richtig aus deswegen die 4 verschiedenen Tagebücher

Hey everyone 😊 This week they were put in the flower chamber :-). I am curious how both phenotypes develop 😊. I will now wait about 7-10 days until the actual flowering begins, then I will add 2 g of GHSC Powder Bio Bloom per liter of substrate. Otherwise everything is going as it should and I'm looking forward to next week new update. Until then, I wish you all the best, stay healthy 🙏🏻 and let ea grow 🍀👋 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .