Likes
Comments
Share
This week, I dealt with a fungus gnat problem. I used parasitic nematodes from Biocont. It looks like they are working; no new gnats are appearing on the yellow sticky traps, and even the weaker plant has started to stabilize.
Likes
4
Share
Que pasa familia, vamos con la cuarta semana de floración de estas Tropicana poison F1 de Sweetseeds. Vamos al lío , las 3 plantas seleccionadas fueron trasplantadas a su maceta definitiva, ya superaron el shock por el trasplante, estas semanas las paremos todas a floración. El ph se controla en 6.2 , la temperatura la tenemos entre 20/22 grados y la humedad ronda el 50%. El ciclo de floración 12h de luz, el foco está al 100% de potencia. Las jodidas estiraron demasiado, veremos como acaban, no me gustan tan altas. Las flores están cogiendo un olor bastante curioso que todavía no puedo llegar a describir, espero la siguiente semana poder dar algo de información. Hasta aquí todo, Buenos humos 💨💨💨
Likes
3
Share
Buena semana para todos!! Esta planta también surgió de un esqueje que intercambié. Al momento de recibirlo tenia 1 mes de vida y lo pasé a una maceta "Air Pots" de 10L. Tuvo 40 días de vegetación en esta maceta, se le hizo podas apicales y Supercrooping para regular su altura. Al día de la fecha (29/5) lleva 17 días florando. Está hermosa. Calculo que en 3 semanas más estará para corte. Saludos y buenos humos.
Likes
5
Share
So, here we are at week 1, and she is growing amazingly. Feeding just with water when the soil is dried, I will keep using just water until the first week of flower then I will use the easy bloom tablets in the water. See you all lads! Let's grow a BIIIIIIIIIIIIIIIIIIIGGGGGG plant!!!! Love!
Likes
2
Share
Likes
13
Share
The Bruce Banner girls are growing strong and full of energy this week.💪🔥 They’re all at slightly different stages, but overall doing great: #2 is the most advanced one, she’s already done stretching and started to produce trichomes early in the week.✨ #1 is still the biggest plant in the tent and finished her stretch around mid to late week, also showing the first trichomes by now.🌿 #3 kept stretching until the end of the week and is a bit behind in flower development, but she’s almost as tall as #2 now and catching up nicely.🚀 All three plants look healthy, rich green, and well-balanced, no signs of any issues. They were watered as usual with RO water + CalMag, and got one feeding of Orgatrex this week.💧 Environment stayed on point: 24.8°C, 55% RH, and PPFD around 900–1000 µmol/m²/s under the Spider Farmer SE5000, controlled by the AC Infinity AI system 🌡️. The stretch is almost over, trichomes are forming everywhere, and the tent is starting to smell amazing, everything’s moving in the right direction 😎✨
Processing
Likes
22
Share
@DankBudz
Follow
Well a few weeks left and they are starting to fall over. Gonna be interesting holding then up for another few weeks. LoL
Likes
8
Share
I really enjoy this variety I love how the stems are already turning dark purple the plant has grown great so far did a major defoliation I would like to get them into flower in the next week or two but I'm not 100% sure what I'm going to do yet. I would like them to be just a little bit bigger.
Likes
20
Share
Gracias al equipo de Royal Queen Seeds, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁Punch Pie: Un híbrido monstruoso con un 90% de dominancia índica, ocupa uno de los primeros puestos de la lista de favoritas de Kid Dynamite. La Punch Pie desciende de la Cherry Punch Pie de Tyson 2.0 y contiene la genética de dos índicas galardonadas: la Purple Punch y la Purple Kush. Punch Pie tu paladar se impregnará con ricas notas de pastel de frutos rojos, repostería caramelizada y tierra. Luego, pocos minutos después de la primera calada, sentirás todo el poder de este portento. La Punch Pie proporciona un combo 1-2 que se manifiesta justo en medio de los ojos y derrite todo el cuerpo, dejándote en un estado somnoliento, hambriento y apacible. Produce plantas compactas que alcanzan una altura de 80-110cm en interior y hasta 120-150cm en exterior. Tras 9 semanas de floración, esta señorita robusta crece con fuerza para soportar el peso de sus densas flores, y da cosechas de hasta 600g/m² en interior y 750g por planta en exterior bajo el sol. 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS- 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 6: Esta semana ha explotado 💣, los cogollos comienzan a tomar densidad y llenarse de resina, me hubiera gustado aplicar algo mas de nutrientes en la fase vegetativa, la próxima vez será.
Likes
16
Share
@Hempcules
Follow
WEEK 13 This OG Kush is developing an enormous amount of volume, just as expected. There are about twelve beautiful branches, all already loaded with thick, heavy buds. However, judging by the trichomes and the hairs, it’s clear the plant still needs quite a while before it’s ready. The intense heatwave has finally passed for now, which the plant definitely appreciates. I’m still feeding her strong and generously, and that seems to be working very well so far. I remain absolutely impressed by this phenotype. It was a real stroke of luck, and I think this will be one of my best autoflower yields ever. PPFD: 1000µmol/m²/s Water: 2x water 2x nutrient solution Vpd: 1,6Kpa
Likes
4
Share
Likes
1
Share
Same feeding as last week. They've grown alot since i started this diary, getting a bit
Likes
19
Share
Unfortunately these ladies had to be cut earlier before finish as im moving abroad and plans happened alot quicker then I was expecting,anyway very strong genetics from FastBuds I will be back very soon with some autodoors grows Will upload the last photos of their life once again amazing genetics
Likes
51
Share
@Waveform
Follow
Once again, this week starts where the former one ended. With the exception of all the cables you can see in the first picture. I dared to install a minimalized version of the Raspi control only controlling the self-built humidifier and one blower/fan combination. I was very pleased to see how easily the simple diffusor can hold optimum VPD as long as temperatures are high and humidity tends to fall below optimum VPD. A single 10 seconds evaporation can hold the level for about 2–3 minutes. I am not pleased to see the Monsanto blowers rather underperform. It’s impossible to reduce humidity or temperature with both running on full speed, while a lifting of the tent door will bring immediate changes. With the Raspi/Arduino success so far*, I am thinking about using old Power Mac fans which are WCM controllable and use 12 V. At least one to increase air intake, and maybe even the blowers. * It wasn’t any problem at all to have the Arduino collect CO2 and soil moisture data, so after some more cable manufacturing (aka helpless soldering), I could extend the Raspi control. I’m still uncertain about the camera module (@trelorny impressed me with his time lapse videos). I don’t want to put the hardware into the tent with its not so electronics friendly climate, already risking some rare outages of the temp/hum sensor. But the camera module cannot be placed far away. So maybe I’ll use the 3A model I own as a spare part as a camera driver. Any maybe, if it works, invest in a better camera module. Mine is generation 1. Oh, and the ladies! Gave them slightly fertilised water yesterday, and even it or the better VPD yesterday or a combination of both make me believe bud growth is a bit more visible today. The smell in the morning when I open the tent to release accumulated humidity is outstanding. They were already thirsty on day 57 again, so pure RO + a bit of tap water until it spilled out of their pot’s bottoms. Many fan leaves turning autumnally now, and the smallest Sherbet suffered a bit from over-fertilisation as I wrote. But it this stage I don’t go for leaf beauty anymore. Just another learning: Don’t use differently sized pots anymore. Hard to feed them individually this way. VPD was mostly in best range yesterday, and I have the feeling it really supports their bud growth. I added an "Evening time" option to my Raspi control that allows the humidity to sink a selected time before lights shut down. That made it possible to have humidity in best range for most of the night time too. They were even dry again on day 58 morning. Another time just water. The blowers cannot cope with the flowers’ smell anymore, and so sometimes my flat cannot hide who shares it with me. Day 60 presents me with a problem: I’ll leave on Friday for a few days. Considering the microscope pictures are not from the tops buds: Would you say it’s safe to give them another week? Problem solved on day 61. Only clean water from now on, and next week will be their last. You won’t see any new pictures for some days now. Me too … Something I wanted to share with you before I leave: I just finished to update my grow box control with a new PWM fan hat that keeps the Raspi cool, while at the same an infrared sensor can now measure real leaf and additional ambient temperature. Setup is much cleaner and more robust now, but I wish my flux would not make the solder stick to the tip of the machine instead of making it flow and stick at the tiny tiny spots I have to hit …
Likes
25
Share
@Behave
Follow
Air humidity rises...some percents more and i will install my dehumidifier. I cutted some leafs again to make sure that the lights reach deeper zones. Both are veeeeeery thirsty at this stage. I still have no issues - all leafs are marvelous.
Likes
4
Share
Day 71 Update: water today and likely pulled out and put in a closet for 48 hrs starting Tuesday or Wednesday. O is still well behind but seems to be on track for quite a harvest. S, V, and P are going to be harvested simultaneously in one go and then O will have the tent for its last week or two. Since O is still mid-flower, it got 8 ml of each of the GMB pH Perfect Trio in one gallon and the rest just got filtered tap. Day 73 Update: Lot of action today. Uploading pics from my phone, will update with tags and details from desktop later.
Likes
10
Share
24.11.23- 116 день (56 дней 12/12) На данный момент это самое большое растение в палатке . Размер его почек просто огромный и они еще продолжают расти (большинство стигм еще белые ) . Огромное количество сахара на листьях и почках,трогать руками невозможно 😂 Пахнет сладким дизелем или газировкой . Выглядит потрясающе 😻 Завтра начинаю давать рипен 10 дней
Likes
38
Share
@Tesla
Follow
Week 10 since switched to 12/12h. (it's in time if the first week of blooming is deducted.) Trichomes're 80% cloudy. I didn't find any amber trichome yet. Pistils are 50% orange 50% white. Today I started flushing the coco (a lot!). I really don't want any sign of fertilizer in my pot. So, from here no more food, only plain water. Suggestions are always welcome!
Likes
7
Share
My only clone that made it of the gopher glue started to flower and i re vegged her. This is after 7 weeks since the switch to 20-4. Thinkin i may keep her as a mom taking morecuttings tonight because rhisstrain was abslute fire.
Likes
71
Share
@Buerofrau
Follow
Last defoliation before changing the light schedule.