Likes
Comments
Share
@Suemchen
Follow
Sanlight EVO 3-60 at 80% Day 106: looking good and watered again🌊. Watered with rain water and 1ml/l Powerzyme, 2 ml/l Hesi Boost, 1 ml/l Cal Mag, 1 ml/l Alg a mic, 1 ml/l root Juice, 0.5 ml/l Bloom Complex and 1 ml/l Green Sensation. EC at 2.0 and a pH of 6.4 . Day 108: looking really good 🤗 watered with out supplements 👌🏻 Just rain water 👍🏻 Defoliated a little 👌🏻 Day 111: looking good and watered again🌊. Watered with rain water, 1 ml/l Cal Mag, and 1 ml/l Green Sensation.
Likes
9
Share
Buds are dense..let's see how she weigh after drying
Likes
36
Share
@valiotoro
Follow
Super frosty & rock hard buds💥 Delicious terps🤤 Perfect buds leaf ratio
Likes
2
Share
Routine maintenance on these girls
Likes
5
Share
Likes
37
Share
😎MARSHYDRO LED😎 Defoliation 3rd week flowering for better light 💡 penetration & air movement
Likes
10
Share
Set up a second 3x3 tent and put GGs in one tent, BBs in the second. Alternating watering and nutrients every 48 hours. PH 6.3 for both.
Likes
44
Share
I’m actually Super happy they sprouted on the 1st it just makes keeping track of what day your on so much smoother l think, but I think one was having a hard time getting the shell Off so I helped just I tiny bit!
Likes
4
Share
Started the grow out trying to do an organic run with foop nutes, was never able to stabilize the ph and started notice problems in the leaves. Got on Amazon and bought the ph perfect line from advanced nutrie
Likes
15
Share
~ FASTBUDS TESTER #2201 ~ Well friends, here we go on another 'canna-venture' together! The grow room has had a complete remodel and some upgrades done to it including brand spanking new 4x8 and 4x4 tents and a Trolmaster Hydro X controller along with a new Control Panel. This tester strain is one of six tester strains that FastBuds has graciously provided me with and I'm looking forward to seeing what this girl has to offer when she's grown to her full potential! One drawback of 'testers' is I have little to no information on it other than its number and that it's an autoflower... 🤪 But, it's ALWAYS a blast growing them for me because not knowing a lot allows me to just concentrate on the essentials: Light, Environment, Water, Nutrients and possibly a bit of LST... not complicated, just basics like keeping a constant temperature and RH in the tent at a level that gives a good VPD, watering when almost dry and maintaining proper light levels according to their stage of growth. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~THE SETUP~ ~Initially seeds were lightly scuffed, then soaked for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Mars Hydro Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged. ~Planted into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph. ~Once roots emerge from the Jiffy Pellet they're transferred to their fabric pots. ~Grown 100% organic in a 4g Gronest fabric pot and a 3g fabric pot by Wraxly filled with Mother Earth 70/30 Coco/Perlite medium and initially amended with Dr. Earth 4-4-4 / Earthworm Castings / Dr. Earth Flower Girl 3-9-4 and Coast of Maine Stonington Blend Organic Plant Food 5-2-4. ~19/5 light cycle for the entire run with supplemental UVA added during flower. Lights are controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. ~Top dressing every 3-4 weeks with slow release dry amendments and Earthworm castings. ~Straight water ph'd @ 6.2-6.8 when needed and bi-weekly Compost Tea's. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 12/1- I soaked both seeds for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Vivosun Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged roughly 24 hours later. 12/3- Today the tap root on one of the seeds was about 1/4 to 3/8" so at 11 am I transferred it into a Jiffy Peat Pellet that was hydrated with distilled water warmed to 78℉ with a 7.0 ph using a tine off of a plastic fork as a 'mini trowel' to make a hole in the pellet and to gently cover the tap root, leaving only the seed head slightly exposed. This method accomplishes most of the initial work the seed has to do by eliminating having to orientate itself, push it's root down and head up. By 10pm the #1 seed had her cotyledon leaves opened ...calling the #2 a 'fail to germinate' and I'm not going to soak another... We'll let it ride with just one of this tester. 😉👍 12/5- Well this is Day ONE for the #1 FBT #2201! I'll keep her in the covered/heated Jiffy tray until I see her roots beginning to emerge from the peat pellet, then I'll transfer her gently into her 4g Gronest fabric pot from FastBuds. 12/7- Yesterday I checked her, she had roots starting to emerge from her pellet so tomorrow I'll transfer her into her 4g Gronest pot. 😎💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow Strong! 💪😎🤙
Likes
6
Share
@CanOli95
Follow
Bud development is really nice. Now you can clearly see purple buds, starting to produce a layer of resin. The purple from spreads from the inside to the sugar leaves, leaving a nice colour. The smell to this point, is not that strong. But she smells like a doughy overripe fruit, very sweet, but not yet like a cherry. I'm excited to see, how it's gonna turn out in the end. She is not a thirsty plant and is not asking for a lot of nutrients. I just added a small mixture of bloom fertilizer, just to prevent deficiency symptoms. O guess she will take another 5 to 6 weeks, to become fully ripened. So far the plant is really easy to handle , just don't overfeed her and she is running on her own.
Likes
Comments
Share
Likes
6
Share
Everything going quiet well. Watering 2-3 days 2 liters per plant
Processing
Likes
11
Share
Likes
14
Share
@kevxyn
Follow
Diese Woche habe ich sie noch einmal ordentlich entlaubt. Jetzt ist sie ready für die Blüte. Die letzten zwei Tage durfte sie in Ruhe chillen und sich erholen. Ab heute bekommt sie 75 % Lampenleistung. Ich hoffe auf richtig große, schwere, fett stinkende Buds.😅🤣😎
Likes
104
Share
Good growth this week, the roots have already reached the pots! The Blackberry Cake seems to develop nicely but it's still smaller than the two others. I topped the plants and started to apply some LST and they responded very well. This is the first time I try to do some LST without bending the main stem, let's see how it goes. I increased the light power to 75%. I moved the fan to be further away from the Blackberry Cake because it seems that it suffered from the wind, the leaves look and feel dry. During watering, only a small quantity of water ran down in the saucer and I poured 2l in each pot. The Blackberry Cake and the Cashew Kush looked a bit droopy, I think I should have watered a bit sooner. It starts to smell in the room 😏 Plants heights at the end of the week : ------------------------------------------- Blackberry Cake : 12,5cm Jack Herer : 18cm Cashew Kush : 19,5cm
Likes
27
Share
@LSchnabel
Follow
This plant was amazing from start to finish. I will update a final comment soon as well as final weigh and a review of the smoke once sent out to a group of testers.
Likes
9
Share
@OGbros
Follow
ITA: Ciao a tutti, le piante continuano a stare bene ma l'umidità era troppo alta quindi ho deciso di comprare un nuovo estrattore d'aria da 125mm (prima era da 100mm ma non era sufficiente). Vedrò nei prossimi giorni se si vedranno risultati EDIT: l'umidità purtroppo non è scesa in quanto non c'è ricircolo d'aria nella stanza in cui c'è la box. Probabilmente userò un deumidificatore. Le piante hanno messo molte foglie e si coprono un po' motivo per cui tra qualche giorno eseguirò un'altra defogliazione. Stanno iniziando a fare odore, molto leggero ma si inizia a percepire ENG: Hi everyone, the plants are still doing well but the humidity was too high so I decided to buy a new 125mm air extractor (it used to be 100mm but it wasn't enough). I'll see in the next few days if we see any results EDIT: unfortunately the humidity has not dropped as there is no air recirculation in the room where the box is. I'll probably use a dehumidifier. The plants have put on a lot of leaves and are covering up a bit which is why in a few days I will be doing another defoliation. They are starting to smell, very light but you are starting to perceive