Utopia Haze
Vegetationswoche 18 - Tag 119 - 126 Diese Woche gab es nur eine größere Aktion. Ich habe sie einmal großzügig entlaubt, damit wieder mehr Licht und Luft an die Pflanze kommt. Ansonsten habe ich sie einfach weiter wachsen lassen. Der Grow läuft weiterhin ruhig und sie entwickelt sich sehr gut.
AnesiaSeeds Hyper Glue / marshydro
DevilsBud
@DevilsBud
Follow
Week 2 of veg Hyper glue Start of new week everything going as planned i will be bumping up the nutrients and by end of the week will be transplanting to 8 L fabric pots. Posting pic of progress Tru the week see you next week 23/9/21 transplant complete mix some Easy Boost Organic Nutrition with my Plagron batmix work great last time also made video Happy growings Growmies thanks for popping by 🤘🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Fully marshydro supported Setup: Marshydro GT100X100X180 Marshydro Ts 1000 LED lamp Some handy info about the marshydro TS-1000 Increase Yield&Crop Quality in Led Grow Newest SMD Led technology provides the highest Par/Lumen output, makes you get 30% higher yield compare old led lights, can get up to 2.5g/watt yied. High Efficiency Energy Saving Plant Light Only 150 watts true output with so you don't have to check your light bill every month 😎 342 pcs LEDs, more scientifically and energy-efficient! Perfect for 3'x3' (100x100cm) veg stage and 2'x2' (60x60cm) bloom stage, higher intensity in a Mars Hydro grow tent. Sunlike Full Spectrum Led Indoor Growing Infinite close to natural sunlight, suit for all plants whole satge indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. High Reflective&Noise Free Fanless Led Grow System Quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants to receive more energy and without burning your plants for maximum headroom
3rd Grow
Canna96
@Canna96
Follow
Hey Now, this week went pretty good for the Acid Dough Auto, I started feeding her some PK booster/Kool Bloom, and also did a very light defoliation. I think I trained her out a little too far, because she only grew to about 30 inches. I think the sweet spot will be right in between what I did with the Wedding Cheesecake and this Acid Dough Auto. Not much to do now except wait for the buds to swell up and develop. I also posted a short video with a few pics from all my grows over this past year. Thanks for stopping by, I hope everyone has an amazing weekend, be safe and Blaze On!!!
Twenty20Mendocino Ateam R&D
Twenty20 Ateam R&D Update! Wow this week went so great, Germination was 100%successful!! We went with the usual paper towel method an they all popped up in the soil on Saturday the 28th! Let’s grow lil babies let’s grow!!
Pound cake auto (2×2 1Light 1Plant)
Ninjabuds
@Ninjabuds
Follow
The pound cake auto so far is an amazing plant. It has grown great and is super strong. Honestly it might be the strongest growing plant I have ever grown The weather is starting to warm up a bit it has been below freezing for over 30 days and now the snow is starting to melt finally it’s a lot easier to keep the humidity on point when it’s like 32 outside compared to 10
Dutch Blue Automatic
I'm so happy to see pre flowers at 4 weeks... going into week 5 Dutch Blue Automatic is looking strong and robust growth everywhere. Thank you Marcel, @ Spliff Seeds for the opportunity to grow! Life is good! The true UVB light has been killing any insects and any mildew or mold... UVB is a must have in every garden.
First time on pure Coco
Today I have diced it is time to switch to 12/12 scheme. Net is almost covered and I am expecting some stretch during pre-flower phase. Watering volume is increasing day by day, thanks to my dehumidifier I can keep the VPD around 1.2. Temperature is a thing... probably need to cool down some in a few weeks. Thankfully I am already adding CO2 so that should do it. As you can see I have raised EC a bit. That was easier than bringing the PH down with PH-minus. Some little burned tips on the leaves but I do like the overall colour. So let's see how it goes. 15/06: Sorry... something more important came up than updating my report.... On Monday, I start working for a boss... it's been over 20 years, so it will take some getting used to... I also suddenly had to buy a car because I hate cycling. I usually dislike driving too, but as long as the car has enough power, I can live with it and stay dry. Regarding the ladies... the problem with the persistent lighting does indeed seem to be an internet issue, as it hasn't occurred again. Furthermore, the amens is just brutally large compared to the others and will soon overgrow the whole net. I don't mind... I always prefer the strongest. In the photo from 3 days ago, this is still fairly visible, but in the photos below, it's getting harder to see... Harvesting will also be fun... Keeping the stuff separate by type will be a challenge. Water values are currently nice and stable, though I did increase the CO2 slightly to an average of 1350ppm. I've also already hung my blooming lamps (not visible in the photo). These are again Chinese quantum boards, but 400W each. They will run 4 hours a day for the last 3 weeks. This way, the dehumidifier doesn't have to work as hard, and I keep the stuff around 30˚C. Actually quite satisfied.... the first signs of flowering seem visible, but not convincing enough to take pictures yet...
Best Clones... Showing off my...
Chucky324
@Chucky324
Follow
Hello This is the end of week 5 and the beginning of week 6 of flowering. The plants are starting to put on some weight now... and the resin is flowing. I like it when the resin is visible on the edges of the top fan leaves too. Those plant always have more resin.... Still got a month to go. I like to flower for 10 weeks. Smelling strong in here now.... Sweet Candy Floral Cookies... Yeah Smells Good!!! 😃 OK. Have Fun. Chuck.
London Poud Cake Hidro #1
fabialien
@fabialien
Follow
Comienza la semana del 3 al 9 de noviembre. Se le hace poda de bajos nuevamente el 2 de noviembre
Frissian duck
Bembeto
@Bembeto
Follow
Se sigue alargando la maduración del pato 🦆 pero bueno, se nota que están ganando tamaño los cogollos y a su vez una forma hermosa😍 Estoy enamorado de los colores ya les contaré aserca de ella cuando llegue la cosecha, muchas gracias por el apoyo de la comunidad a lo largo del proceso, motivan a seguir haciendo diarios incluso mejores y mejores. Un abrazo hasta la próxima actualización ✨✌️
SintrexGrow North Thunderfuck Autoflower
Plant growth is amazing!. I really love royal queen seeds. The plant is very healty and strong. I am using organic nutrition from biobizz and plagron lightmix as soil. All together they are worling really well. Looks like this Matanuska plant is going to be a very bulky plant. Looking foward to finish the grow
WestOzzie
WestOzzie
@WestOzzie
Follow
Starting to see flowers now,did some pruning,took off big fan leaves and some other little ones to get more light in,has been 2 days rain https://youtu.be/3oju_Zeh7_E
original big bud auto
tuccio
@tuccio
Follow
settimana 7 e ancora i fiori ingrossano
LST no limite
Tmasm
@Tmasm
Follow
LST no limite, planta dobrada em 3 vezes, até ficar totalmente horizontal, manter cimo da planta, no mesmo níveis do resto da planta. Bem ela perde um pouco de crescimento, tenho que dar mais umas semanas de crescimento, para poder recuperar. Será um mar verde, mas em ponto pequeno, uma charco verde 😃
Runtz & Roses // Pickled Lemon F1
BUZIMAN
@BUZIMAN
Follow
Flowering Update Everything is going well for these ladies! 🌱💚 The flowering stage is well underway, and they’re starting to drink more and more each day They’re now drinking almost 2 liters per day! 💧 Can’t wait to see what the next few weeks bring… 👀
Short Sativa
BearBuds
@BearBuds
Follow
End of week 8, she is so close now!!! All I have to do is guide her through this final week of flush and hope that nothing crazy happens. All fingers and toes are crossed. Cannot wait to see the final yield on this one. I really can't even take a guess at it. I hope its large, but ya just never know.
Girl Scout Cookies
ClubRiot
@ClubRiot
Follow
Week 8 , pH Perfect Connoisseur Bloom Part A ( 1 ml/L ) pH Perfect Connoisseur Bloom Part B ( 1 ml/L ) CarboLoad Liquid ( 2 ml/L ) Sensi Cal-Mag Xtra ( 2 ml/L ) Sensizym ( 2 ml/L ) Bio-Heaven ( 2 ml/L ) Big Bud ( 2 ml/L) Nirvana (2 ml/L)
Juice Fit For A King (#1, #5)
9/22 topped them at 4th node. some of them are looking better for mainlining that others. some of them i may not mainline and others i left an extra node in case i want to keep clones around. #1 is looking happy with the topping and looks really good. #2 is the only one thats been praying and is the tallest and strongest looking all around. #5 short and such tight internodal spacing that it makes it hard to see whats all there. just looks like a bunch of small leaves until they grow out. i may not mainline this one either be cause of it being so tightly packed it may make it 9/27/24 day 20 theyre growing quite well. #1 i ended up taking the bottom nodes. i was originally goi g to use them as clones later on but decided to just let her go with her 4 nodes. #5 is so tightly packed, she has like 8 mains all in such a small space, its hard to even make sense of it all.
Seedsman Jack Herer
yvet_te
@yvet_te
Follow
Did some defoliation to get ready to flower. Took off a ton of huge fan leaves. Don’t really think I removed enough, honestly. Removed a couple lower, small branches and chopped the top 4 nodes of my tallest plant. It was getting too tall for the tent, and is now the same height as the others. Put the cuttings in some rapid rooters with rooting hormone. Will hopefully have 6 clones total!
Royal Dwarf , Little daniel.
BobRoss
@BobRoss
Follow
I hope i do good for my first grow with an 20euro setups. , gived less plant feed due yellow leave tips. First trichromes start to apear.
Dolato S1 x In House Genetics
Harvest 2 weekend ago and dried at ~60° at 60 RH. Took about 12 days total.