GG4 clone day 174 11-23-24 - Gave 4 cups of water GG4 clone day 175 11-25-24 - Gave 2 cups of water GG4 Clone day 178 11-28-24 - Gave 2 cups of water

the little one is rising quickly this week, I think it will last another week, a week and a half at most, before dedicating itself to full flowering. the seedling entered the pre-flowering phase a few days ago (2/3 days ago)

2/04 Very nice strain by Weed seed shop, first time 100% indoor. Growed Fems and Autos outdoor from their bank few times in the past, and it was also nice. Loved the colours, very homogeneous plant. Manicure made just before the harvest I will weight flowers after drying, before curing and add infos and photos

Plants are coming along. Looking good. Getting big/bushy. 6 Weeks (12/25/2024)

Week 9 started with having to bring down tent once again it was only for one day it did happen to rain lightly that night honestly plants are resilient af they have been thrown a lil bit of everything an they bounce back no problem all deficiencies it had in Earlier weeks seem to go away right away buds are just stacking up nice.. I do notice the plant in 7 gal fabric pot is bigger than 5 gal pot.. also all my training to keep it spread out kinda goes out the window everytime I have to remove scrog net..we are about halfway there..gonna flower for about 8-10 weeks

During week 13 I stop giving any nutrients in order to FLUSH the plants. The 12 AK-47 plants from SERIOUS SEEDS are in their last week of flowering (=9th week) and have developed into huge little trees. The size of the colas is ASTOUNDING to me at this stage, bigger than anything I have seen on plants in 7 liter pots. Unfortunately I see first signs of bud-rot on some plants, therefore its time to soon harvest the plants. The humidity during the late stages of flowering has been much too high due to bad weather outside. The high humidity with the huge size of the buds are the perfect circumstances for bud-rot beginning to grow INSIDE the buds (it always starts at the stem and grows to the outside). I spot a yellow sugar leave on a top and pull it out, since I feel no resistance at all, I take a closer look and open up the bud carefully. I spot grey mold at the center of the bud growing out of the stem and want to start to cry...my worst fear has come true...BUD-ROT is inside my beautiful plants! The only thing to do now is to cut off any infected parts and finish the grow as quickly as possible. The SANlight Q5W-Gen.2 LED-lights are still in full-power mode and some plants now show signs of light-bleaching at the very top of the plants. This means the plants grow white new flowers instead of green ones. The plants look like they have small snow-caps on top of the plants...an AMAZING THING to see. This can be avoided by dimming the LEDs during the last week of flowering or by hanging the LEDs higher. The white parts of the bud have the same quality as the rest, therefore i dont mind a little light-bleaching. What makes my heart hurt is the parts with bud-rot. Since mold can cause cancer when burned and inhaled, it is of utmost importance to cut off any infected parts off the plants when they are harvested. This means I will get much less medicine that I hoped...😢 At least the quality will be GREAT, since the buds are glistening with trichomes now and they SMELL AMAZING. The aroma is heavy and thick and lightly sweet with hints of Sandalwood...simply DELICIOUS!

Hello and welcome to u all.. Hope ur well and had a great day.. 😁👍 Great 2nd wk of growth.. Roots are starting to fill out tray and vegative growth is going strong it seems.. Still a bit warm but temps av dropped loads last few days in my area thankfully.. Took alot of central n lower grow sites away this wk n just trying to open her up a bit b4 she stretches.. Flipped lights to true 12/12 today and will b planning a 70day flowering program (already 14days thru!).. Emptied out res and flushed top tray with 10ltr plain ph'd water @5.8 and 21°c so not to shock her roots.. Looking forward 2 my first crop from Humboldt's stock.. 🤞😎 Huge thanks to you all for your constant support, comments, follows and likes.. Stay safe n best of luck in ur gardening adventures.. 👍🍀

Doing well despite the high humidity

Its amazing how tall these plants are getting, the topped one is just as tall as the non-topped. Flipped these to 12/12 last weekend, no sign of flower yet, added some p/k to the last watering. Slight burning on top leaf tips which I'm guessing is because of it growing closer to the light, I'll have to work out a way to shorten the light hangers.

Day 61 so happy with how she’s progressing.

This week went pretty well, other than she stretched like crazy and I am now getting worried about running out of vertical space. I also had a few of my bottom leaves get a few brown and yellow spots on them. I did post some pics and asked a question, thank you for the responses, much appreciated! I am thinking about adding my Spyder Farmer LED 100 Watt light into the tent for the nebula auto because it is about 23 inches shorter than the sour diesel. I believe it would only raise my temp about 2 degrees, and possibly lower the humidity by one or two percent. I must say my dehumidifier has been a freaking stud, running 24X7 and not complaining. I should look into adding another unit, it has been in the mid 90's and muggy for about a week. So far I have to say I am super impressed and excited with this setup, the genetics, and with growing this wonderful plant in general. Already planning ahead to my next grow, and what I can do better. I have been enjoying myself and I really appreciate everyone who has taken the time to answer my questions! I am having a blast and am excited to see what this lady will give up in a few weeks!

Well, that day has come, the girl would have been really different if not for the high temperature, strong light, and a huge lack of potassium :( well, everything will be fine next time :) live and learn :) I am satisfied with the result, which is what I need :) got 200 gr of liquid :) gathered a lot of sugar leaf :) they are already in the sweet shop :D I will make an addition!! good growth and success :)

Semana tranqui, siguen engordando, las Frisian Dew las voy a tener que cosechar antes me parece, pero voy viendo, ahora tengo menos moscas, pero siguen habiendo varias todavía, los 80 litros se bancan muy bien una semana sin agua (ahora riego una vez por semana).

SATIVA DREAM by KANNABIA Week #7 Overall June 18-25 Week #6 Veg This week she's doing good no issues she's doing good outside dealing with the heat she split evenly after topping. Stay Growing!! Kannabia.com SATIVA DREAM

Little bit of last this week to expose the nodes and buds.

Once again, this week starts where the former one ended. With the exception of all the cables you can see in the first picture. I dared to install a minimalized version of the Raspi control only controlling the self-built humidifier and one blower/fan combination. I was very pleased to see how easily the simple diffusor can hold optimum VPD as long as temperatures are high and humidity tends to fall below optimum VPD. A single 10 seconds evaporation can hold the level for about 2–3 minutes. I am not pleased to see the Monsanto blowers rather underperform. It’s impossible to reduce humidity or temperature with both running on full speed, while a lifting of the tent door will bring immediate changes. With the Raspi/Arduino success so far*, I am thinking about using old Power Mac fans which are WCM controllable and use 12 V. At least one to increase air intake, and maybe even the blowers. * It wasn’t any problem at all to have the Arduino collect CO2 and soil moisture data, so after some more cable manufacturing (aka helpless soldering), I could extend the Raspi control. I’m still uncertain about the camera module (@trelorny impressed me with his time lapse videos). I don’t want to put the hardware into the tent with its not so electronics friendly climate, already risking some rare outages of the temp/hum sensor. But the camera module cannot be placed far away. So maybe I’ll use the 3A model I own as a spare part as a camera driver. Any maybe, if it works, invest in a better camera module. Mine is generation 1. Oh, and the ladies! Gave them slightly fertilised water yesterday, and even it or the better VPD yesterday or a combination of both make me believe bud growth is a bit more visible today. The smell in the morning when I open the tent to release accumulated humidity is outstanding. They were already thirsty on day 57 again, so pure RO + a bit of tap water until it spilled out of their pot’s bottoms. Many fan leaves turning autumnally now, and the smallest Sherbet suffered a bit from over-fertilisation as I wrote. But it this stage I don’t go for leaf beauty anymore. Just another learning: Don’t use differently sized pots anymore. Hard to feed them individually this way. VPD was mostly in best range yesterday, and I have the feeling it really supports their bud growth. I added an "Evening time" option to my Raspi control that allows the humidity to sink a selected time before lights shut down. That made it possible to have humidity in best range for most of the night time too. They were even dry again on day 58 morning. Another time just water. The blowers cannot cope with the flowers’ smell anymore, and so sometimes my flat cannot hide who shares it with me. Day 60 presents me with a problem: I’ll leave on Friday for a few days. Considering the microscope pictures are not from the tops buds: Would you say it’s safe to give them another week? Problem solved on day 61. Only clean water from now on, and next week will be their last. You won’t see any new pictures for some days now. Me too … Something I wanted to share with you before I leave: I just finished to update my grow box control with a new PWM fan hat that keeps the Raspi cool, while at the same an infrared sensor can now measure real leaf and additional ambient temperature. Setup is much cleaner and more robust now, but I wish my flux would not make the solder stick to the tip of the machine instead of making it flow and stick at the tiny tiny spots I have to hit …

19.10. Hallo. Tag 23. Hat sich etwas vom Fimming erholt.

Seed to harvest day 67 Sticky buds Fruity smell Good strees performance Total Used power 400w