Likes
Comments
Share
Set up an evaporative cooler to act as an intake and to cool the temp through evaporation. It I was able to get the average temperature down to an average of 77°. Relative Humidity increased to an average of 55%. ~~~~~~~~~~~~~~~~~~~~~~ Evaporative Cooler: The evaporative cooler was way bigger than I thought and blowing all the air into the tent would be overkill and would throw off my ventilation given that I only have a 4inch exhaust fan blowing air out. So I had to rig an air duct onto the front to channel some, but not all, of the air coming from the evaporative cooler. I cut a hole in a plastic brownie box and zip tied right angle plate that I had leftover from an ikea furniture. Then I put velcro tape to easily attach and remove the air duct from the cooler for future maintentance and cleaning. I left the room where my tent is closed one day and the humidity went up to 84% which also increased the temperature to 90° but I found that simply leaving the room door open gives the cooler enough air circulation in order to function properly and averaged out at 55% RH and 77° F. ~~~~~~~~~~~~~~~~~~~~~~ Defoliated some ugly fan leaves that were shading a lot of lower buds.
Processing
Likes
6
Share
@Mr_Maes
Follow
This girl is by far the healthiest plant I have ever had at this stage. By healthy I mean she is the biggest, the greenest, and has the thinckest stem I have grown yet. Today is day 28 from seed and she is as thick as a marker lol. I grow in small 5 gallon pots. My stem is normally as round as a milk jug cap. I feel like this could do better.
Likes
1
Share
@Anon73
Follow
Performed simple maintenance this week. Provided nutrients. The flowering has increased dramatically. I discovered five areas showing a boring worm has entered the branch where the leave connects to the node. I have sprayed with monterey BT to start control over the worms. I will spray three days later after the rain. I will continue until a week or two before harvest. These worms can do serious damage so I’ll be aggressive to ensure a healthy harvest.
Likes
30
Share
So far these plants have shown nothing but resilience and a will to grow I have put quite a bit of effort in but I’m sure I’m lacking in one or two spots but you would never be able to tell by the Look at the plants they seem quite happy and they are relatively patient with a new grower lol
Processing
Likes
26
Share
Otra vez familia, estamos de vuelta con estas skunk de zambezaseeds, sin palabras de verdad fumetillas, son una cepa muy lograda las flores están formándose muy compactas , y empieza a engordar de verdad, ya me diréis cómo las veis? Yo las veo muy sanas 🙅‍♂️
Likes
30
Share
A great week for my Northern Lights she seemed to slow down on growth a bit the first couple weeks of flowering. This was actually the scrappy looking one that I didn’t think would turn out so pretty,,,, but she looks beautiful today ✌️🌱✌️
Processing
Likes
4
Share
Likes
13
Share
@NSABND
Follow
Day 50 and a new week... the summer comes back to germany and "Hilde 2.0" goes well 🙏😀 Day 51 ... the summer is back in germany ... sun and heat 😎👍... good for the Buds 😉🙏
Likes
10
Share
@MG2009
Follow
10/06/2021 Harvesting #2 and #1 to prevent more loss to mould. #3 will tackle in morning. #2 hardest hit. #1 not much #3 less. Mould Weight will be added later as I have lost my scale in moving. On to curing for 3-4 weeks and I will update the smoke report
Processing
Likes
14
Share
@mrekansh
Follow
3 ml npk in 2 l water And given half of it! Plant seems to like it And pruning worked wonder! Leaves are healthy and getting much bigger in size! 15 cms+ excited!!
Likes
5
Share
Sorry I only have two pictures today but it really isn't much to see. She's still in half veg half bloom mode. Soon she should be loading up. Either way I will be uploading this entire grow journal to my YouTube channel which is easy to remember. I am Ben and I chase big budz. Ben Chasin' Big Budz Hope to see you there
Likes
13
Share
Today is Day 66 & chopped down this morning to hang the whole upside down. Lower my AC to 68 but in the dry room it at 63 degree & humidity at 53 working it way up. Gotta to keep the door shut. On my calendar marked Day 1 Harvest. Around Day 12-14 will do the dry trim & update for harvest post. Will go in Grove Bag ✔️
Likes
1
Share
@Rigs70
Follow
Topped, defoliated and started training the 2 bottom branches branches on both plants. Also added a root growth enhancer i use for cloning, not Kangaroots.
Likes
36
Share
@Island
Follow
Week 4 Broad Mite still making victim. On this week I watered she with water + diatomaceous earth Still waiting for better days, I hope hv succes 😐 Apparently the diatomaceous earth is working against broadmite 😅
Likes
39
Share
@Roberts
Follow
Bubble OG Gum auto is growing great. She is bulking, and has a fruity kinda of a gum smell. The smell will change slightly as she grows more I am sure. It's looking super frosty and like it will be a great smoke. Thank you Ganja Farmer, Athena, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
15
Share
@PiusWaxis
Follow
Here we are almost at the end of this incredible journey, the tenth week of flowering is over, the growth and progress of my plant shows no signs of slowing down. Every day brings new surprises and advancements that continue to amaze me. The commitment to providing high-level care with Plagron's premium nutrients has proven instrumental in maintaining the plant's exceptional health and vigor. The results speak for themselves, as the plant continues to flower and show robust development. 💪🌿✨ The buds have expanded further in size and density, yielding under their weight, and displaying an eye-catching layer of resin that highlights the vitality and overall well-being of the plant. It's truly a sight to witness and a testament to the benefits of using high-quality nutrients throughout the growing process. The TrollMaster "TENT-X" environmental control system remains an indispensable component of my grow setup, ensuring that the grow room maintains the optimal balance between temperature and humidity levels necessary for plants to thrive. The system's precision control capabilities remain critical in creating an environment conducive to optimal plant growth. 😎💪 The 240W MEDIC GROW MINI-SUN 2 LED light continues to provide stellar lighting conditions, providing plants with a tailored spectrum that meets their specific growing needs. By carefully monitoring temperature, humidity and VPD data via control system graphs, I can make precise adjustments to optimize growing conditions and maximize plant health and productivity. 😍 I'm excited to share a video that captures this week's temperature, humidity, and VPD trends, offering a look at how these advanced technologies work together seamlessly to create the perfect growing environment for plants. It is truly amazing to see how these tools work in harmony to support the growth path of plants. As each week unfolds, I am filled with anticipation for the new discoveries and obstacles that await us in the grow room. With the unwavering support of Plagron nutrients, the continued reliability of the TrollMaster control system, and the exceptional lighting provided by MEDIC GROW LED, I am confident that the next week, as well as the last, will usher in further progress and triumphs in this cultivation journey. Thank you for joining me on this exciting adventure of growing and exploring the wonders of growing plants! 💪👽🚀