Likes
Comments
Share
@cangrowz
Follow
🍪🍨 Biscotti x Gelato - Ernte 🍨🍪 Heute ist es soweit: Die Biscotti x Gelato wurde nach ihrer langen Blütezeit geerntet. 🎉 Der Grow war definitiv eine interessante Erfahrung. Gerade durch das LST und SCROG hat sich die Entwicklung etwas länger gezogen als ursprünglich erwartet, dafür konnte die Pflanze zum Ende hin nochmal ordentlich zulegen. Die Buds haben sich bis zuletzt sehr schön entwickelt und waren zum Erntezeitpunkt richtig dicht mit Trichomen überzogen. Besonders auffällig war die enorme Klebrigkeit der Buds. Schon beim Ernten waren sie richtig harzig und haben einen intensiven, sehr angenehmen Geruch verbreitet. Genau dieser starke Duft zusammen mit dem frostigen Erscheinungsbild hat am Ende nochmal gezeigt, dass sich das Warten definitiv gelohnt hat. 🍪🍨 Jetzt geht es für die Ernte erstmal in die Trocknungsphase. Anschließend folgt natürlich noch das Curing, bevor ich die Biscotti x Gelato endgültig beurteilen kann. Auf das finale Ergebnis bin ich daher besonders gespannt. 😎 Alles in allem bin ich mit dem gesamten Grow sehr zufrieden. Die Biscotti x Gelato hat zum Schluss nochmal richtig abgeliefert und verabschiedet sich mit ordentlich Harz und einem fantastischen Aroma. 💚 Grow abgeschlossen jetzt heißt es warten auf das finale Ergebnis! Happy Growing Growmies 🌱?
Likes
3
Share
As you can see we're still going strong let me know if you have any tips or
Likes
25
Share
Giorno 56 La Grape Rolex v2 va bhe l'avevo già fatta ed è uno spettacolo come odore e consistenza dei fiori. La Jack 47 Xl #2 mi ricorda una Sweet Cheese e insieme al formaggio puzza di pompelmo (?!? 😀) Le Crystal Candy XL sono le mi preferite come altezza e struttura. A settimana prossima per altre fotografie 🖐️
Likes
22
Share
@Slobasian
Follow
Love every plant each one is growing differently stacking different even the visual difference of one strain growin two different ways combined smells of diesel, pez candy and lemons
Likes
10
Share
Been too busy to update the last few weeks, but they’re surviving longer then I expected. When I received my new light I did not take in consideration of the heat output and within the first night of use the tent reached a scorching 88 degrees
Likes
20
Share
Amazing flower time 💚💚💚 Buds is strong ...verry strong . smell AMAZING 💚💚 Unbelievably fragrant plant. The flowers are beautiful and slowly begin to ripen. My guess is to wait another two weeks and it will be harvested.💚. Thank you watch
Likes
27
Share
Делали маникюр 5 часов в 6 рук, все липкое Вкусно пахнет, много фиолетовых оттенков Много листвы сахарной и вторичного продукта
Likes
Comments
Share
Blue Zushi S1 Harvest on Flowerday 70! Currently Drying in the Wine Fridge at 55% RH and 12°
Likes
37
Share
Progress and Observations In week 6 of flowering, my plants are displaying significant development. The buds are swelling noticeably, and resin production is increasing, filling the grow area with a rich aroma. Weather Conditions and Plant Health Unfortunately, the weather in Germany has turned to consistent rain over the next five days, which is less than ideal for the final growth phase. To protect the plants, I've moved them into the greenhouse full-time. This controlled environment shields them from adverse weather conditions, ensuring stable conditions for continued growth. Pest Management I'm pleased to report minimal pest issues thus far. Nightly patrols continue to manage the snail population effectively, supported by lettuce leaf traps. There have been no signs of spider mites, aphids, or thrips, providing relief. With the ongoing rainy weather, I remain vigilant against potential snail problems. Low-Stress Training (LST) Update The plants I trained with LST have responded positively and continue to develop well. I did some more LST to maximize light to the colas. The canopy remains even, and the bud sites are receiving ample light, allowing for a slight upward stretch to maximize bud growth during these final weeks of flowering. I try not to cut off any fan leaves because I think they're here for a reason. I like to tug them behind the steam or the side branches. Only if the leaves show significant signs of illness or pest then I remove them. Looking Ahead As we move further into the flowering stage, my focus will be on maintaining optimal conditions to maximize bud development and resin production. I am also diligently monitoring the humidity levels in the greenhouse, as this is crucial for preventing mold growth. The plants are looking promising, and I’m excited to see how they progress in the coming weeks. Update 03.07 What is noticeable is that both untrained plants are entering the full flowering mode faster than the trained ones. Have you had similar experiences? Update 05.07 Today I checked the girls and found the Banana purple punch with the top leaves starting to curl down. After asking the community I found out that everything looks like a starting nitrogen toxicity. But only on that plant. Seems kind of strange that the others having no issues at all despite having the same amount of nutes. I decided to treat the symptoms a once so I flushed with 5l PH water. The first runoff was a little lower (5.5 / EC 1.09) but not really concerning. Afterwards I give the plant the half amount of the tripart flowering scheme (with added CalMag 2 ml/l PH 6.2). Thanks again to AsNoriu and Hashy Stay tuned for updates and like always, feel free to give feedback about things I can improve🍀🥦
Likes
69
Share
Hello! For this setup i´ll use Optic 1 XL in a 80cmx80cm tent, (indoor grow), with temperature, humidity and air flow controled... Have heard great things about Real Cookies and now it´s time to grow it! Have successfully germinated 2 seeds out of 2 using the easy start kit from RQS, 100 % rate! (made a DIY box and used the wireless router to keep it warm) Notice this seeds have sprouted in less than 48h it´s a personal record to me! I´m using Janeco light mix and prepared the soil with the the easy boost organic nutrition before reporting the seedlings... It´s time to turn on the lights and let the mother nature do the magic!
Likes
24
Share
Likes
73
Share
@Roberts
Follow
Cookies and Cream is growing great under the Medic Grow Mini Sun-2. I changed her solution today, I also defoliated her, and pruned the tips off the long roots. I then proceeded to lollipop the canopy. She has been growing strong, and fast. I hope it continues 🤞🏻. Thank you Medic Grow, and MSNL Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
5
Share
Nähere Informationen und Bilder folgen im Laufe des Prozesses. Die Ladys hängen jetzt zum Trocknen.
Likes
21
Share
@BB_UK
Follow
Brand new amnesia punch Zamnesia and ripper seeds collaboration have made a never to forget strain! There was only 500 so I got me one and germinated a seed to add to my photo tent so I could be one of the first to test and try it! Started in a glass of water for 48hrs then onto paper towel for 24hrs then potted! I am running them in 12L of soil, I have also put Co2 bags into the tent too
Likes
4
Share
Week 9: Flower - The First Harvest & Final Countdown! ✂️🌿 THE BIG CHOP IS DONE! Gorilla Z #1 has been harvested, and we're officially in the drying phase. Meanwhile, the remaining ladies are marching toward their own finish lines. Gorilla Z #1 - HARVESTED! 🎉 She's down! After weeks of growth, recovery from overwatering, and pushing through to the end, this girl finally got the chop. Trichome Check: Mostly cloudy/milky (peak THC production ✓) A few amber trichomes starting to show Minimal clear trichomes Harvest Timing: Honestly? I was in a rush—ran out of flower to smoke! 😅 But the trichomes were in a good window, so it worked out. Sometimes necessity makes the decision for you. Could've waited for more amber for a heavier effect, but she was ready enough. What's Next: Drying phase begins now Aiming for slow dry (60°F, 60% humidity if possible) Then comes the cure—patience will be tested again! The Relief: Finally got some homegrown coming down the pipeline. The timing couldn't be better! Gorilla Z #2 - End of Month Finish She's still chugging along in mid-to-late flower. Based on her current progression, she should be ready by the end of the month. Current Status: Buds filling out nicely Still getting full-strength bloom nutrients Recovery from overwatering is complete—she's back to full health Feeding Schedule: Full strength General Hydroponics Bloom Trio Cal-Mag Liquid Kool Bloom She'll stay on this program for another week or two, then transition to water-only flush before harvest. Heisenberg - Two Weeks Out & Starting the Flush! 💧 She's in the final stretch! About 2 weeks away from harvest, which means it's time to transition to the flush. The Flush Begins TODAY: Water only from here on out No more nutrients Flushing helps the plant use up stored nutrients in the leaves and buds Results in smoother smoke and cleaner taste Why flush? Removes excess salts and nutrients from the medium Forces plant to metabolize stored nutrients Improves final product quality (smoothness, taste, ash color) The leaves will fade and yellow—this is GOOD and expected during flush Current Status: Buds are dense and frosty Loving the Spider Farmer tent environment Healthy and vigorous despite approaching finish Key Observations & Real Talk Harvest #1 in the books! There's something incredibly satisfying about chopping your first plant of the cycle. All the work, the stress, the learning—it all comes together in that moment with scissors in hand. The staggered timeline is actually perfect: Gorilla Z #1: Harvested (drying now) Heisenberg: 2 weeks out (flush started) Gorilla Z #2: End of month (~3 weeks out) This spread means I won't be overwhelmed with trimming and drying all at once. Plus, continuous harvests = continuous supply! Running out of smoke as motivation: Look, we've all been there. Sometimes the best harvest window is "I'm out and I need flower NOW." 😂 The trichomes were good enough, and that's what matters. The Home Stretch Strategy For Heisenberg (flush phase): Plain water only, pH'd to 6.5 Monitor trichomes closely Watch for fade (yellowing leaves = plant eating itself = good!) Start thinking about chop day in 10-14 days For Gorilla Z #2: Continue full bloom nutrients for 1-2 more weeks Then begin her flush Harvest late February For Gorilla Z #1 (drying): Hang dry in dark, controlled environment Check daily—don't rush it! Stems should snap, not bend, when ready for cure Then into jars for the cure (the hardest wait of all) Next Week's Plan Monitor Gorilla Z #1 drying progress (resist the urge to sample too early!) Continue water-only flush on Heisenberg Keep feeding Gorilla Z #2 full strength Daily trichome checks on Heisenberg as harvest approaches Prep trimming station and cure jars for upcoming harvests Start planning the NEXT grow! 🌱 We're in the final stretch! One down, two to go. The finish line is in sight, and the reward is almost here. 🏁🔥 First harvest complete. Drying tent smells AMAZING. The wait for cure is going to be brutal but worth it! 💚✂️
Likes
34
Share
Began flushing the colas are way bigger than I was expecting.......it's all green from here expect to harvest within the next two weeks
Likes
13
Share
@Lazuli
Follow
This was grown during cold winter, she drooped at some point in veg and pre flower but still got a good yield.
Likes
18
Share
Hey fellow green thumbs! 🌿💚 We’ve just wrapped up the fourth week of flowering with our Auto Fast Pete and Auto Northern Dragon Fuel from Super Sativa Seed Club. This week has been a mix of challenges and progress, but our resilient ladies are pushing through. Let’s dive into the details! 🌟 Week 8 (Fourth Week of Flower) Progress: Day 50-52: Bud Bulk and Stress Signs • Auto Fast Pete: Pete has bulked up significantly, with buds swelling and becoming more resinous. However, the light schedule change seems to have caused some stress, resulting in burned leaves and possible nutrient deficiencies. Despite this, the buds are looking fantastic and are still on track for a great harvest. 🌿🌸 • Auto Northern Dragon Fuel: Dragon Fuel is also showing impressive bud development. The buds are thick and sticky, but like Pete, she’s showing signs of stress with some burned leaves and potential CalMag deficiency. Her resilience is evident as she continues to push through and develop beautifully. 🌱✨ Day 53-55: Addressing Deficiencies and Adjustments • Nutrient Strategy: In response to the stress signs, we increased the dose of CalMag slightly to see how the plants would react. The goal is to mitigate any deficiencies and support healthy bud development. 🌿 • Reservoir Details: • TDS: 450 (increased slightly to boost CalMag) • Temperature: 18°C • pH: 6.2 • Environmental Conditions: • Temperature: 31°C • Humidity: 51% Monitoring these adjustments closely to ensure the plants recover and thrive. Thank you Trol Master, seriously 🌡️💧 Day 56: Observing and Fine-Tuning • Auto Fast Pete: The buds are continuing to grow and mature despite the stress signs. The plant’s overall health is being monitored closely, with an eye on the leaves and bud development. 🌿🌼 • Auto Northern Dragon Fuel: The bud sites are dense and sticky, and the plant is showing resilience in the face of stress. Continued monitoring and fine-tuning of the nutrient regimen are key to supporting her through this phase. 🌱🌟 🌟 Care Tips: • Light: Adjusted to a 12/12 light schedule, which seems to have caused some stress. We’re keeping a close eye on the plants to ensure they adapt and recover well. 💡 • Autopot System: The Autopot system continues to provide a steady water supply, reducing the need for frequent manual watering. This system is great for maintaining consistent soil moisture, which is crucial during the flowering phase. 🌊 • Nutrient Monitoring: Increased the CalMag dose to address potential deficiencies. Keeping an eye on the reservoir’s TDS and pH levels to ensure the plants receive the right amount of nutrients and minerals. 🌿 • Environment Control: Maintaining a stable temperature of 31°C and humidity around 51% to create the perfect conditions for flowering. Adjusting airflow and positioning to optimize plant health. 🌡️💧 🌟 Genetics Spotlight: Auto Fast Pete: • Characteristics: Rapid bud development, strong structure, early resin production, but showing signs of stress and possible nutrient deficiencies. This strain is still pushing through with impressive bud bulk. • Future Expectations: Continued bud swelling and resin production. Monitoring nutrient adjustments closely to ensure a healthy finish. Auto Northern Dragon Fuel: • Characteristics: Robust structure, dense bud sites, resilience, but also showing stress signs and possible CalMag deficiency. The buds are still developing beautifully. • Future Expectations: Significant bud growth and increased resin production. Close monitoring and adjustments will support a strong finish. 🌍🌿 Fun Fact: Did you know? 🌿✨ CalMag deficiencies are common during the flowering phase as the plants have higher demands for calcium and magnesium to support bud development. Addressing these deficiencies early can make a big difference in overall plant health and yield! For all the in-depth action and detailed explanations, head over to my YouTube channel! 🎥✨ I’m sharing all the tips, tricks, and step-by-step guides to help you get the best results from your grow. This week has been particularly challenging and exciting, and there’s so much more to explore and learn together! 👉 Join me on YouTube Link in my profile 👈 🌟 Conclusion: Week 8 marks the fourth week of flowering, with both Auto Fast Pete and Auto Northern Dragon Fuel showing remarkable progress despite some stress and deficiencies. The buds are developing beautifully, and with careful monitoring and adjustments, we’re set for a promising harvest. Stay tuned for Week 9, and happy growing! 🌿💚✨ #SuperSativaSeedClub #Week8Report #FastPete #NorthernDragonFuel #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney Germination method 🌱 @thecannakan Genetics @supersativaseedclub_official Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_official 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚 Discount Codes : @thecannakan DOGDOCTOR 15% off @theneutralizer PORKIT5-DOG 15% off @kannabiaglobal DOGDOCTOR 30% off @seedsmangenetics DOGDOCTOR 10%off @terpyz.mutant.genetics DOCTOR 15% off
Likes
16
Share
@Mospeada
Follow
Beginning of week 7 in flower, only two more weeks left if they ripen like they did last time. Plants are beginning to smell, develop triches and fattening up. They're not going to get any taller but compared to my first grow they're double in size. It's getting really intense. I'm in there every day checking humidity (on the no defol side) and I'm starting to struggle keeping up with the feed. During lights off I've found the plants eat the most food. I topped up the res, added 25% more PK. I try to keep the plants at 700 ppm and in the space of four hours it dropped to 600 ppm (towards the end of lights off). I stopped directly loading with Calcium Nitrate and instead used a regular calmag. I'm about to go overboard with Calcium Nitrate again and bump the ppm up to 1k. Will see how far the ppm drops the next day. 17/02/20 Update: The plants are beginning to smell a lot more, it has that kind of fermenting pungent smell from a red paw paw but applied to a mango. Very sweet, it literally smells like I'm growing some kind of tropical fruit. Still struggling with the feed, I added close to 40g of calcium nitrate and the plants still dropped the ppm lower than when I boosted it. I find it really frustrating that Dual Fuel only sell as a pair. Part 2 is amazing for late flower. Potassium sulphate and Magnesium sulphate, it's the perfect PK boost and I don't know anyone other nutrient like it. The other PK boosters always have too much P. 18/02/20 Update: Still battling my plants and the efforts to keep up with them is still frustrating me. Ran out of potassium Sulphate and bought Bio Diesel Rhino K 0-0-15 as a substitute, talk about expensive but I was desperate. 19/02/20 Update: Uploaded how I pump calcium into my plants this late into flower. They eat more than what I showed daily. That's 100+ ppm of Ca everyday! I don't know how much pectin this plant has now but the Brix would have to be through the roof compared to my first grow. 20/02/20 Update: finally got the feed right for a twelve hour period. I'm using two times the amount of K any bloom booster recommends and I'm probably using ten times the amount of calcium easily. I'm also going to feed as minimal N from now on, I'd cut it out completely if I could but I rely on Micros for the macro nutrients. Spent $65 on that bottle of potash and I used a third of a bottle for one nutrient change, think I'll stick to using powered water soluble potassium sulfate. My main concern is that I won't be providing enough iron with the little Micro I'm giving it. Going to throw a couple of rustry nails into the res. I'm about to do a top up...dropping the Micro super low, putting minimal part 2 in. Along with all the fulvics, humics, kelp and other acids my ppm only sits at 244. Which gives me plenty of room to load up on calcium. Top up the mag cause what was in the part 2 wasn't enough then load K. 21/02/20 Update: The plants finally stalled and took a breather yesterday. Didn't upload any photos cause it looked the same as the day before. By the end of the evening it looked like the explosive growth started back up again and the photos from today will show it. The ppm was creeping up not down this time...finally over feeding them. Dropped the extra loading of calcium and potassium to regular bloom phase levels and bumped the chelators up instead. Update 22/02/20: plants aren't eating what they were. Ppm is remaining stable at 800. I won't dilute the res just yet. Still holding off to see if it goes up again. If it goes down I'll refeed the same formula as last time that has reduced calcium and potassium.
Likes
5
Share
@BombBuds
Follow
Erntezeit! Getrocknet wurde 9 Tage bei ~55% Luftfeuchtigkeit und 20 grad. Trocken getrimmt. Alle Popcorn nugs und Verschnitt zu Hash weiterverarbeitet.