Processing
Likes
Comments
Share
@Calarok
Follow
Lots of things this week! I did some aereted compost tea for the first time. Recipe is easy. 1 5 gallon of declorinated water. In a 400 micron bag, 2 scoop of worm castin, 2 tbsp of alfafa, 2 table spoon of kelp 1 table spon of bat guano. 2 tbsp of unsulphure melasse. Then you put air pomp in it for 24 to 36h max. After its watering time! Big shout out to Mr. Canucks Grow for the tutorial video. Definitely the best weed channel out there! https://youtu.be/whE2F72P8Tg I also unplug the main cob in the white bucket to let only the custom 60w full spectrum led. I think the main cob burned the plant... still not sure but i will try a week with out it. Thanks for following! Happy growing and stay safe!
Likes
12
Share
@Capa1
Follow
1 plant harvest and 1 still going
Likes
25
Share
Venga tercera semana crecimiento de estas Casey’s rollex O.G. de Dutchfem, La verdad que se ve muy marcado el porte indicó que tiene, un color espectacular , que ganas de ver cómo florecen, a llegado el otoño y lo notamos en la temperatura siendo led. . La humedad anda entre 55% la temperatura está entre 22/23 grados , y como siempre el ph , ya que es de lo más importante,está en 5,8/6,0. . AgroBeta: 0,8 ml x L Growth black line , vía radicular. 0,2 ml x L Tucán , vía radicular. 0,15 ml x L Flash Root , vía radicular. 0,05 ml x L Gold Joker, vía radicular. . Hasta aquí todo gente, espero que os este gustando , un saludo y buenos humazos 💨💨💨.
Likes
16
Share
Flowering day 72 since time switch to 12/12 h. Hey guys :-) Finally the time has come . The lady was harvested and hung upside down in the dry tent 😍. Before that, she stood in the drying tent in complete darkness for 2 days and the large leaves were removed. The small leaves stay attached during the drying process so that they protect the buds and allow them to dry more slowly and evenly :-) . In the dry tent, the temperature is 18-19.5 degrees and the humidity is 54-58% 👍. In this environment they are now allowed to hang for 10-14 days before they are fine-tuned and trimmed clean by hand. then after trimming they come to ferment for 6-12 weeks in dark jars with bobeda packs 62% to keep the perfect humidity. After a few weeks, the Boveda packs 58% are used so that they can slowly dry out :-) . Of course there is one last update after trimming. Until then, I wish you a lot of fun with the update. Stay healthy and let it grow 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.ripperseeds.com/en/feminized/kmintz-feminized-cannabis-seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Likes
56
Share
The heat had me nervous this week but they made it out without a hitch. Didn't do much at all this week with these ladies just watered twice. Second watering added a little fish bone meal, molasses, aloe Vera, and algae to the water to fuel those microbes...
Likes
38
Share
Coming along nicely. 4th week into flowering and she will surely finish fast. Buds are a little thin imo. But fattening is still a long ways before finishing. And I'll be adding higher part B of master bloom (as it has more pk). But still given a good NPK dose just not so much of pre-flower but more heavy flower npk. + bloom stim given 2x a week. And everything else is given weekly as stated above. 2npk 550 ppm feeds + 2 bloom booster & 1 of everything else. PH'ed between 6.6-6.8. Water 1.5L every 6 days or so plant takes in 800ml without spilling out a bit. Happy with the performance of Xpert Nutrients and this been my 1st Fast-Flowering im liken 'em a lot. Lfg Fastbuds. Thanks to all my sponsors, seed & Nutrient alike. And also for the inside rays. Much love SF/MH. Thanks to all whom drop(ped) by. I appreciate it. Good Growing. DISCOUNT CODE FOR XPERT NUTRIENTS 20% OFF CODE: GGST XPERTNUTRIENTS.
Likes
19
Share
Spiders has taken over the pot of plant C but i guess they will keep the insects away, so they welcome. Pictures from day 42. I do not think they will be ready in one month but we will see. How long do you think they have left? Im actually going on holiday in July so its a bit of a dilemma for me whether to harvest before or after and hope for rain in the 2 weeks i will be gone. Any ideas would be helpful!
Likes
174
Share
@DreamIT
Follow
😬😆UnCoNvEnTiOnAl GrOwTh 😆😬 ____________________________________________________________________________________________ 🤪 6.2 I now start with the flowering week but the honey cream started flowering 6 days ago. So I hope to remember that I will have to allow for an extra week than normal. everything is going well. yeah! 🤪 7.2 ... 🤪 8.2... 🤪 9.2... 🤪 10.2... 🤪 11.2... 🤪 12.2 today we discovered that the cat does not like soap bubbles, never mind, muahuahauhauhaua 🤣😁 ______________________________________________________________________________________________________ 📜👀 A look at the details of what I'm growing 👀📜 🍊💚 Red Mandarine F1 🍊💚🌱🍭 Sweet Seeds 🍭🌱 📋 Details 📋 ⚧ Gender ▪️ Feminised ➰ Genes ▪️ 55% Indica / 45% Sativa 🎄 Genetics ▪️ Red Poison Auto (SWS39) хCalifornia Orange x Skunk hybrid) 🚜Harvest ▪️ 400 - 500 g / m² 🌷Flowering ▪️ 49 - 63 days ✨THC ▪️ 16% ✅CBD ▪️ 0,2% 🏡Room Type ▪️ Indoor 🌄Room Type ▪️ Outdoor 🕋Room Type ▪️ N/D 🎂Release Year ▪️ 2019 ___________________________________________________________________________________________ 👀📷🥇 Follow the best photos on Instagram 🥇📷👀 https://www.instagram.com/dreamit420/ 🔻🔻🔻Leave a comment with your opinions if you pass by here🔻🔻🔻 🤟🤗💚Thanks and Enjoy growth 💚🤗🤟
Likes
7
Share
¡Hola a todos! Han pasado 3 semanas de floración y ya se pueden ver pequeños brotes. He estirado aún más las ramas que han crecido. También he recortado las hojas enormes para que la luz pueda penetrar en el interior de la planta. He agregado más fósforo al fertilizante para estimular la floración. Ahora solo queda la etapa final de la floración. ¡Estoy esperando con ansias!
Likes
28
Share
2024/04/19 : with second flowering week comes 1L PK Booster solution @10mL/L and that's all! From now, I won't bother measuring temperature, pH or EC solution as it's useless with autopot. Just don't forget water in the tank...😅 Blueberry is stretching : height is now 30 cm. 2024/04/22 : forgot to reset led to DLI 28~35, plant is splendid. Tried to make a quick vid.
Likes
80
Share
@Hawkbo
Follow
Sorry for the delay was in a wedding this weekend came home and been trimmin like a dog the past few days but I gotta feed everything in this tent tmm so I'm gunna get some pics. If your interested in the pics come back tmm night
Likes
20
Share
Que pasa familia, última semana de floración de esta farm cheese de genofarm, y que decir, es increíble vaya aroma y vaya flores repletas de tricomas. Lleva su limpieza de raíces ,después se controló ph temperatura y humedad todo el cultivo, de principio a fin. Variedad de 10 para trabajar en indoor, ideal para SOG .
Likes
7
Share
A bit of pain, trying to not over water her while it's steaming hot inside. She is looking beautiful, and hopefully just finished streching. I hope for some cooler days so I can bump the lights to 100%
Likes
8
Share
Hello everyone. so the growth causes me some concerns from what I believe I have identified as a deficiency in calmag but I have trouble getting out of it despite a second spray with 1ml of calmag/li at ph 6.5. yesterday I watered adding 0.8 calmag/litre (biobizz) I'm waiting 2/3 days to really panic. on the other hand, the stems are really big and suggest a robust plant and the well erected leaves reassure me about the overall health. I take all your advice with great pleasure. thank you all.
Likes
20
Share
Likes
3
Share
@CalGonJim
Follow
3/16 234AM MONDAY POTATO N WEEK CELEBRATIONS! The plants in your photos look like healthy, vigorous **RF3 autoflower seedlings** (likely Banana Purple Punch Auto RF3 or similar from Fast Buds' upgraded RF3 line, based on the context of your previous grows with their genetics). They're in early vegetative stage at around 3 weeks from seed—nice bushy structure, good node spacing, dark green leaves, no major deficiencies or burn yet. The coco medium shows some perlite mix, and they're in small pots with what looks like a well-draining setup. Solid start **RF3 autos** from Fast Buds are bred for stability, vigor, and resilience (often with heavy resin, dense buds, and good yields), but like most modern autos, they're sensitive to overfeeding early on—especially in coco, where salts build fast if not managed. ### Recommended EC at 3 Weeks (Early Veg/Pre-Flower Transition) At week 3, autos are usually ramping up vegetative growth and may start showing pre-flower signs soon (pistils around nodes). Fast Buds' general autoflower feeding advice (from their guides and nutrient articles) emphasizes starting low and going slow: - **Target EC: 0.8–1.2 (800–1200 µS/cm)** in the feed solution. - Start at the lower end (~0.8–1.0 EC) if your plants are still very young-looking or if you've had any tip issues before. - Push toward 1.0–1.2 EC if they're hungry (rapid growth, pale lower leaves) and responding well—no burn. - This is often ~400–600 PPM (500 scale) or ~560–840 PPM (700 scale), but always go by EC meter for accuracy in coco. - Always measure **runoff EC** too—aim for it to be no more than +200–300 above input to avoid salt buildup. If runoff is much higher, do a light flush with FloraKleen (like your 4 mL/gal plan) before bumping up. - pH the feed to **5.8–6.2** (coco sweet spot), and water to 15–20%+ runoff every feed to prevent the issues you've seen with Purpinator/salts. Many growers with Fast Buds autos (including RF3 lines like Banana Purple Punch or Cherry Cola RF3) report week 3 feeds around 0.9–1.1 EC in coco/hydro setups, starting lighter if using tap/soft water like yours. Your previous success with lighter Maxi feeds post-flush at ~900–1300 EC later on fits well—don't jump straight to 1.3 yet at week 3; build gradually. ### Recommended PPFD (Light Intensity) at 3 Weeks PPFD (Photosynthetic Photon Flux Density, in µmol/m²/s) measures usable light for photosynthesis. For autos in early veg: - **Target PPFD: 300–500 µmol/m²/s** at canopy level. - 300–400 is safe and conservative for week 3—prevents stretch or light stress while encouraging compact, bushy growth. - 400–500 if plants are stretching a bit or you want faster veg (RF3s are vigorous, so they can handle it). - Avoid over 600 early—autos can bleach or foxtail if blasted too hard young. - Measure at the top of the canopy with a good PAR meter (or app like Photone if calibrated). In Indio's setup (likely LED or HPS?), hang lights higher early (18–24" for LEDs) and lower gradually as they grow. - Keep 18/6 or 20/4 light schedule—autos thrive on consistent long days. General tips for your RF3 at this stage: - If using Maxi series (like your previous grows), mix a light bloom/veg combo—e.g., mostly MaxiGro early, transition to MaxiBloom as pre-flower hits. - Watch for clawing (N excess😂) or tip burn (high EC)—flush lightly if needed. - These RF3 upgrades are forgiving but love good airflow and moderate feeds for those dense, resinous buds. Your plants look primed for a strong run—keep that intuition going! How's the light distance/setup right now, and what's your current feed EC looking like? Any pre-flower signs yet? Drop more pics if they stretch or change post-week 3. You're killing it in coco—keep observing runoff and leaves. 🌿🚀 3/19 330am 👨‍🔬 **Adding L-Proline (the amino acid supplement growers use) to plants on soft water can provide some helpful support against the stresses you're dealing with, but it's not a full fix—think of it as a stress-buffer rather than a mineral replacement.** Soft water (low in calcium and magnesium) often triggers **Ca/Mg deficiencies** in bloom stage (especially with Cha Ching or MaxiBloom, which don't supply much Ca/Mg on their own). This leads to issues like tip burn, leaf curl, weak cell walls, nutrient lockouts, oxidative damage (ROS buildup), and overall plant stress that feels like "the plant is struggling to hold it together." Proline steps in here as an **osmoprotectant**—it's one of the compounds plants naturally ramp up under stress. ### What Proline Actually Does in This Situation - **Helps with osmotic/water balance** — Soft water can disrupt turgor pressure and water movement inside cells (similar to mild drought or salinity stress). Proline stabilizes cell membranes and helps the plant retain water better, reducing wilting or limpness. - **Reduces oxidative stress** — Ca/Mg shortages cause free radical damage. Proline acts as an antioxidant and protects proteins/enzymes, so deficiency symptoms (yellowing, spotting, slowed bud development) don't spiral as fast. - **Improves overall resilience** — In cannabis and general hydro/soil grows, L-proline (or full amino acid mixes containing it) has been shown to boost stress tolerance, speed recovery, and even support better nutrient uptake indirectly. Studies and grower reports note it helps under nutrient imbalance, drought-like conditions, and environmental swings—exactly the secondary stresses soft water creates. - **Bloom-stage bonus** — Since you're already in late flower with Cha Ching/MaxiBloom, proline can support resin/terpene production and bud density without pushing excessive veg growth. It won't magically add the missing Ca or Mg (those are still critical—soft water + high-P bloom nutes often screams for CalMag), but it can make the plant more tolerant while you correct the root issue. ### How Much Effect to Expect Right Now - **Positive but moderate** — Many hydro/RO growers add amino acids (including proline) specifically for soft water setups and report less burn, better leaf health, and stronger finishes. It won't turn a severe deficiency around overnight, but it can slow the damage and give your plants a fighting chance in the final weeks. - **No downside at proper doses** — It's very safe and plants use it quickly. ### How to Add It (Practical Dosing) - **Source**: Pure L-Proline powder (available cheap online—make sure it's the plant-grade L-form, not human supplements). - **Root feed** (with your Cha Ching/MaxiBloom): Start at 0.5–1 g per gallon (about 100–200 ppm). Mix into your res or feed water once a week. pH as normal. - **Foliar spray** (often more effective for quick stress relief): 0.25–0.5 g per gallon + a drop of surfactant. Spray lightly every 5–7 days in the dark period. - **With your current nutes**: Yes, it layers fine—reduce if you see any tip burn. Many run it alongside MaxiBloom + Cha Ching in soft water without issues. - **Best timing**: Now through harvest is perfect, especially if you're noticing stress signs already. **Real talk**: The biggest win will still come from adding a proper CalMag supplement (like Botanicare or General Hydro's) at 0.5–1 ml/gal or whatever your PPM tests call for. Proline + CalMag together is a strong combo for soft water grows. If you're running pure RO/soft, most experienced growers treat this as standard.""👨‍🔬 3/19 10:09PM RF3 X 2 =6 fail? I have TWO 2 gallon pots filled with coco from the last grow. I can plant a NEW BPP RF3 OR!!! I can top the 3 RF3's and make cuttings and grow the cuttings? It worked before!. FAST turnaround time, not much prep just refresh the coco and transplant the tops! 3/19 10:59PM NO WORK FOR NOW.. HIT WITH MASSIVE WAVES OF NAUSEA AND SHARP PAIN, DIZZY, RUPTURED NECK CYST BLEEDING, PAIN FROM MOVING TOO MUCH LAST FEW DAYS, RINIGNG EARS BAD, SKIN PRONE TO MASSIVE INFLAMMATION ATTACKS NOW, WEAKENING GUT LINING,. LUNGS ..GRIP AND BALANCE OFF, SO PERFECTLY NORMAL!!! THANK THE WEED GODS FOR WEED. 3/21 3:30 AM I think I’m gonna top all three of them. I got lucky all three seem to be different ones. I don’t know which is which one of them is really tall. The other one has really tight in her note spacing it’s really good and the other one is also good little bit different so I think I got three different RF three seeds and I think if I do top them I’m gonna put the top in another 2 gallon and then grow that as a cutting usually works I’m not sure👍🌿 3/23 3:08 PM I cut them all in half today a transplanted the top of the tallest one into one that was still growing just to see if it would work. They’re all doing really good.👍 326 237am Remember how your local ss cant prevent or solve a single problem you pay taxes for. unless you're really really sick and the cowards decide that the most important and pressing issue is to raid weed users and farms and seeds...what a country of fuqs
Likes
11
Share
@Skull
Follow
Good week my diesel glue is really starting to branch up after topping at the end of last week I have continued 4days ago and today moderate defoliation I need the Poppin Cherrys pheno to get growing lol, I had a cultivator mystery stain, not last grow the one before that had a decidely slow start but bloomed into an exceptional phenotype, hopefully more similarities than Early leaf structure