Likes
Comments
Share
@Hempel420
Follow
Weekly Update: Highs, Lows, and Care Bears Sep 28: Not much work needed on the solution today except for dialling back the pH from 6.1 down to 5.5. I also cranked the Lumatek up to 50% power. To avoid scorching the tops, I adjusted the light height accordingly, bringing the intensity right up to 500 µmol/m²/s PPFD. Sep 29: I flew a little too close to the sun today. Working with only one functional hand makes delicate training tricky at the best of times. While low-stress training (LST) the branches for the mainlining setup, I got a bit too heavy-handed with the tie-downs without realizing it right away. Sep 30: Well, disaster struck. I opened the tent to find one of the main shoots completely wilted and dangling. In my rush to fix and support it, my clumsy attempt ended up snapping the opposing shoot on the main stem as well! You can see in the photos just how brutal those deep stem tears look right at the node. I managed to secure and tape both shoots back together, but this severe structural damage has set their development back significantly. Time will tell how much recovery is possible over the coming week. Oct 01: Topped up the reservoirs today with roughly 1.5 liters of fresh nutrient solution per bucket. Parameters are sitting rock solid at EC 1.5 mS/cm and pH 5.5. Oct 02: Curiosity got the better of me. I wanted to check on how the damaged shoots were healing and ended up making things worse while trying to "fix" them again. The left side branch seems to be toughing it out, but the right side branch is noticeably stunted now. Other than that, just a tiny pH tweak. Oct 03: Did a light defoliation today, just like the previous two days. Nothing major, just selectively clearing a few fan leaves to expose light to the shaded inner shoots. I’m considering cutting my losses, chopping off the severely stunted branch, and running Plant #1 as a 3-main setup instead. I’ve decided to sleep on it until next week. If it doesn't bounce back, I’ll rotate Plant #1 and push it closer to the tent wall to give Plant #2 the stage because Plant #2 is absolute madness right now, growing exponentially day by day. Oct 04: Continued training and shaping the mains today. On Plant #2, I was already able to top the first two side shoots to establish the target 8 main colas for the mainline. Things remain intense, especially watching how Plant #1 copes with its trauma. I’ve officially placed two Care Bears in the net pot pumice because Plant #1 genuinely needs all the care it can get right now (and I seriously need to stop over-fiddling with it!).
Likes
13
Share
las cepas de royalqueenseeds van creciendo muy bien !! impecable hasta ahora todo funciona excelente se notan sanas y muy pequeñas para tantos nudos , esto se ve esperanzador seguimos aprendiendo y si definitivamente el living soil es lomejor ! solo vean esas nenas como están de felices , natural, organico, barato y reciclable
Likes
12
Share
@Socal6pak
Follow
LOOKS GOOD. GROWING STEAD. NOTHING OUT OF ORDINARY. HAVN'T SEEN MANY PESTS EXCEPT LEAF HOPPERS. WILL PROBABLY NEED TO SPRAY IN JULY TO KEEP CATEPILLARS AND APHIDS OFF. ALL 4 SIMILAR SIZES. NO MUTATED OR SHRIVELED FAN LEAVES. SINCE OUTDOORS. IM NOT GONNA TRAIN TOO MUCH THIS TIME. SINCE THE SUN WILL HIT IT FROM ALL DIRECTIONS. LET'S KEEP HANDS OFF AND SEE HOW IT GROWS.
Likes
164
Share
Last week flush week Overall very pleased with the result did not have a bump in the road at all and she was very easy to grow and very forgiving when it came to her training The cup grow was a succes she stands only 13,5cm tall and from 1 tip of the mainbud to the other she is 30.6cm long and 21cm wide and packed with nugs and the smells fills up the entire growbox with a sweet bubblegumish smells like the pink bubbalicious chewing gum so nice so i only can imagon what complexity her taste is going to be like❤️❤️❤️❤️ So this week is going to be hell for her i’m going to split her completly tru to about 1.5 cm above the soil put toothpicks between her and bind her back together so the split stay open(about 1.5-2mm) so the flow is even more disrupted this tricks the girl into even more overproducing thc and flavours and she has to fight even harder in her last day’s for her survival and eventually begs for mercy🖤🖤😈😈🖤🖤 She is finishing up nicely her little nugs are packed with cristals
Likes
6
Share
@PoshGrow
Follow
Welcome to Auto Alaskan Purple Grow by PoshGrow! 🍀 Week #4 2020 August 13th - 20th. General Info: When planted: 2020 July 23th. Week: 4 Days: 21 - 28 Last Update Day: 2020 August 18th. Plants: 5 Alaskan Purple Auto. Equipment: Tent: MarsHydro 1mx1mx2m or 39"x39"x72". Light: HLG 260w V2 Rspec QB Kit. Exhaust: 4" 322 CFM fan + Viper Carbon Filter. Intake: 4" 100 CFM Inline Fan. Oscillating Fan: Lower: 4" Ram Fan. Upper: 16" Oscillating Ram Fan. Humidifier: Taotronics TT-AH001. Dehumidifier: Pavlit MD750. Soil: NPK soil 40% Compost, 50% Peat Moss, 10% Agroperlite. Pot: 7 gallon Fabric Pot x 5pcs. Nutriens: Fox Farm Trio. PH Correcton: Chemoform pH-Minus Granulat. PH Pen: Cheap Chinese one, I callibrate it every time I use it. Water pump: Digital microscope: Comment:
Likes
19
Share
Roughly 20-30% of trichomes heads now amber under 60x magnification. Would like to push for a few more but I don’t think she can hang on any longer. By the end of the week any remaining leaves are dying back quickly. Reduced Remo Nutrients from 11ml/gal each, to none to start flush on the 28th.
Likes
35
Share
@farahweed
Follow
This week I used #greenhousefeeding bio enhancer !! Drink, my daughter😍😍🌱🌱 I will try to maintain the temperature difference between day and night😌
Likes
14
Share
Likes
16
Share
4/28/25 chopped at day 54 of flowering. Top buds have a nice amount of amber trichomes. was going to let her go another week but the threat of pests made me chop early but its okay shes ready. will update with final weight and smoke report in a week or so. 5/5/25 dried for 7 days and then jarred. i am finding that she was self producing fairly lowkey and successfully. balls and male parts with seeds right below. Probably wont continue with these seeds and i tossed the clones. This plant is white with the density of trichomes on her. She would probably test fairly high.
Likes
2
Share
@Billzbudz
Follow
2 alien og are triving at the mins 1st week into flower little bud hairs stairting to form..Had to trim back tonight and thats the last gonna leave them be..Started giving big buds nuts with all there other feeds today we see how that goes ..so dar so good..
Likes
12
Share
16.02 First day of the fourth week of flower. Defoliated a little bit again. This time around I’m picking smaller amounts of leaves every day in comparison to one major defoliation on one day. Also I ve added pk booster at 100 ppm.( 0.2 ec) will gradually raise it over the next weeks. Lowering the base nutrients. I think they finally stopped the stretch and they are barely fitting in the tent. I ve added some swirski ulti mite . Predatory mites as prophylactic measure for thrips. I’ve noticed some tiny damage on a couple of leaves. And a couple of larvae.
Likes
92
Share
🌱 Week 1: The Journey Begins! 🌟 Hey Grow Fam! 🙌 We’re off to an epic start with our TrolMaster adventure, and I’m already feeling the love for the setup, the seeds, and the growth happening in the room! So, let’s dive right in and get into the details of this exciting week! 🌿 Germination Update: Our first Gorilla Melon seed from Fast Buds didn’t sprout, but no worries—round two was a success! 🦍🍈 The second seed has germinated and is looking full of potential. I’m throwing in a Sweet Seeds Papaya Zoap into the germination station too, so we’re keeping this exciting lineup going strong! Germination is such a key part of the journey, and having a healthy start is what it’s all about. 🔧 Room Build & TrolMaster Setup: The build is coming along beautifully, and I gotta say, the TrolMaster system is blowing my mind! Everything’s under control like magic 🎩✨, and the TM+ app? Wow, just wow. I mean, I can literally be in the bathroom and still keep an eye on the plants—check all the metrics, adjust settings, and fine-tune what I need, all from my phone! 😂💧 This level of control is next level. I’m loving how smooth and seamless it makes managing the room. The gear is just unreal, and seeing it all come together is truly something special. 🌱 Nutrition Talk: As for feeding, we’re starting light but smart! I’ve begun with 0.15ml of Regulator and 0.25ml of Startbooster per liter for now. I always believe in starting easy and ramping up as the plants develop. These early stages are crucial—balance is everything. For the time being, I feel this is more than enough to keep the babies happy and healthy. 🌿💧 The Regulator is working wonders in maintaining plant structure and health, while the Startbooster is fueling the early root and vegetative growth, laying down a solid foundation for the weeks to come. It’s about getting it right from the start—too much too early can be a killer. Keeping it steady with precision, that’s the goal! Big Shout-Outs: To the amazing team at @TrolMaster, @Fast_Buds, @Sweet_Seeds, @AptusHolland, and all the incredible sponsors—I’m beyond grateful for the support! 💚 And to my GrowDiaries fam and followers, you guys make this journey what it is—thank you for the love, and I’m so honored to have you along for this ride. 🙏 We’re just getting started, and I can’t wait to show you what’s next. Stay tuned for more updates, epic builds, gear reviews, and plenty of insight. Don’t forget to follow me on GrowDiaries, YouTube, and IG for exclusive content, and let’s make this grow the best one yet! 🌿🔥 Growers Love to All 💚💚💚 P.S.- A deep dive into the Full Spectrum Quantum Sensor (MBS-PAR): The Full Spectrum Quantum Sensor (MBS-PAR) is an essential tool for any serious grower looking to optimize their light environment. This sensor measures photosynthetically active radiation (PAR), which refers to the spectrum of light that plants actually use for photosynthesis—typically between 400 and 700 nanometers and more depending . What makes the MBS-PAR sensor special is its full spectrum capability, meaning it accurately detects not just visible light but also far-red and UV light—which are crucial for maximizing plant growth, development, and flowering. With this tool, I can monitor the exact intensity of light my plants are receiving, making sure they’re getting the optimal levels for every stage of growth. By using this sensor in my grow room, I’ll be able to ensure that the light distribution is uniform across the canopy. Plus, it allows me to fine-tune the light output from my ThinkGrow LED setup, ensuring my plants are thriving under the best conditions. Whether it’s increasing light during the vegetative phase or fine-tuning it for flowering, the MBS-PAR sensor helps me keep everything on point. And the best part? I can monitor it all through the TrolMaster app, ensuring I can make adjustments whenever needed—even if I’m not in the grow room! This level of precision means healthier plants, better yields, and maximum efficiency. It’s a game-changer for taking the guesswork out of lighting and getting closer to growing perfection! 🌱💡 Growers Love to All 💚💚💚
Likes
6
Share
@Flex1
Follow
Day 40 from sprout: The watering helped the 30gal out after 1 day. 3/30 and 4/1 i topped each plant and continue to tuck leaves. Some defoliation on the lower fan leaves that were touching the medium a bit. I will defoliate a little more this week. Scrog will come out in another week or so. I am seeing some canoeing at the very top of each plant. Could be a pH thing or from heat but chances are its a pH thing. I'll keep an eye on it and lower the water pH i am giving it if it persists. Gave the 2L pot some water (a little top and mostly bottom water) on 4/1. Medium was looking very dry on top but wasnt showing signs of needing water so i didnt give it much.
Likes
76
Share
@BB_UK
Follow
Took a while to get there but OMG little note quick! So I started her in a 1 litre pot and stuck her on top of a 1.5L Pepsi bottle with the top chopped off! And she yielded heavily for that amount of soil a whopping! 224.63 wet weight so can’t wait to see what she holds dry because them buds were like boulders! So dense! I will be back to document her dry weight and then a couple of weeks later with the update on the smoke report! But I know it’s going to be so loud! She has deep pungent aromas like gassy and sweet! She’s going to be a powerhouse! She was a little over as today a banana developed but that just tells me “well done” timing just right! She’s a little long for my taste of auto but I do suggest anyone grow her she’s amazing! In the end!
Likes
7
Share
Moin Community. Tag 63–75 🌱✨ Die Ladys sind voll in der Blüte, die Harzbildung ist jetzt deutlich zu sehen. Sie wurden noch einmal entlaubt und wir gehen in die letzte Phase – kurz vor der Ernte. Das ist das letzte Video vor dem Cut. Wir melden uns wieder, sobald die Ernte ansteht. Meine @ganjafarmer.seed Ladys stehen weiterhin im Living Soil von @white_ash_botanic bereitgestellt von @growandstyle beleuchtet unter meiner Horti Spectra Plus X2 von @hortispectra Canna Community Germany – We Grow Together
Likes
1
Share
@Muuuy
Follow
Week 4 is flower-week! All of our ladies showed signs of pre-flower last week, now there are already visible buds growing. We had to adjust the height of #1 & #2 once again because #3 is just growing crazy. Can't go any higher than the current position without redesigning our whole setup so this will be the final adjustment (hopefully!). #2 is obviously very different from the other ones, she's a little behind in growth. Though, she does have outstanding red colored petioles in comparison to her mostly just green sisters. We increased the amount of nutrients for them since they'll need much more now. This is plant #3/3. She grows way too high for our liking but that's what we expected from the beginning anyways. We continuosly had to adjust the light and the height of the other plants until we can't go higher right now. So wherever #3 wants to grow to now, she's probably getting sunburned from our lamp.
Likes
8
Share
@Hippity
Follow
The girls look healthy, happy, and smell delicious, kinda sweet citrusy. I'm overall satisfied so far. They have some crystals forming on them as well. I feel like it's gonna be a successful grow. But don't think I'm gonna use Green-O-Matic again, it's not as short as I wanted it to be, and it has unstable phenotype. I hope the effects are nice and relaxing though.
Likes
2
Share
@Enki_Weed
Follow
Der neue Chiller ist ein echter Wendepunkt für meinen Anbau! Er hat einen signifikanten Unterschied sowohl bei der Wassertemperatur als auch bei der pH-Stabilität gemacht. Ich habe einen 15-Liter-Wasserwechsel durchgeführt und die alte Lösung durch frisches Wasser und Nährstoffe ersetzt. Der pH-Wert ist jetzt stabil zwischen 6,1 und 6,3, und der EC-Wert liegt konstant bei 1,95. Ich bin wirklich zufrieden damit, wie gut sich die Blüten bilden. Die Pflanze selbst ist sehr kompakt geblieben, was großartig ist. Ich freue mich darauf, den weiteren Fortschritt zu sehen!