Close to the end of week 5 of for the two on the left. Starting to fatten up and fill the top 10 inches of most stalks. Pretty happy so far. The girl on the far right is just starting to form resin glands, hopefully she packs em in because she's on track to have some nice nugs. Looks like she's a little darker green this week. I should just cut her out of the rdwc and fix her. Day 77 moved the three girls to a bigger tent with a couple other autos. Decided to keep them all in rdwc vs dwc because i'm lazy. I did clean everything pretty good though

Day 85 since seed touched soil. Trim jail !!! 2.40 cm of hanging buds !!! Happy Growing !!!

Welcome to the flowering ! Leave a LIKE man :) I think we deserve it Day 29 I got all sweated up in 33°c heat, doing lst under Spiderfarmer, tough work. I felt like black person in slavery period, working on a sugar cane field. Damn that's rough. I did bunch of work on making and adjusting pink rope lines around tent, so I can later spread her real well, did lots of LST, and we will see in several hours how she will respond to it. She responds quick and well. This and next week, I will continue doing LST to maximize area coverage. Day 30 As I expected, monstrous stretch is coming this and next week. Brace yourselves whoever likes and follows ! Day 33 I see very nice stretch, however we have in places lots of stems, and they are all promising. I don't see how to defoliate it efficiently, so I started removing big leaves 2 days ago, and I am doing it everyday. We still have around 7-10 days of good stretch left so hopefully they will even each other out, before MAJOR defoliation time comes. Day 35 I am happy with this plant, even tho I'd wish it to be bushy, but genetics... Barney even mentioned that this is a "COMPACT" plant, but in my hands, she's very far from Compact, she is occupying almost 120-120 tent fully.

Cereal Milk (YLife X Snowman) Gave them a full day of darkness and flushed for two weeks with phd water after flushing with Advanced Nutrients Flawless Finish! UVB light did increase trichomes and it appears it sped up trichome ripening, not 100% sure on the ripening tho. WILL UPDATE AFTER DRYIN WITH DRY WEIGHT! 2/18/25 UPDATE..Cereal Milk weighted in at 39 grams so nearly 1.5oz. The scent is not so strong but it’s there and so far it’s smelling like gassy bad breath smh unless my brothers breath had my nose pallet out of balance lmfao. I’ll cure for a short time and coma back to that!

So at the start of week 3 I began to LST CM#3 to just experiment basically and topped CM#2 I believe. Again, just to experiment. This is my first grow and I was stunned with the reactions to both! The new growth after topping was about 1/4” in about 12hrs.. Crazy to me and the lst is proving to expose these bud sites and encourage amazing growth QUICK!! I’ll continue to train daily. One of the videos show the topped CM just yesterday. In 4 days, it’s grown soo much! Also, a video mentions the gender reveal but since then, all 4 have officially revealed themselves as female at the 22 day mark.

️️Woohoo! New flavors to taste😍 Post-harvest is truly a wonderful time! ️🎉 4x [Hawaiian Snow x Wedding Cake x Gelato 33] harvested on day 97 / flowering 63 ------------------------------------------------------------ 🔥❄️Drying : In my 1M² box 8 Days in the dark Temperature : 14-18°C Humidity : 50-75% Extractor+ carbon filter ON 24/24h ------------------------------------------------------------ Weight of buds after manicure and drying( in grams): Plant A : 24.4 grams Plant B : 17 grams Plant C : 20.2 grams Plant D : 16 grams Total : 77,6 grams ------------------------------------------------------------ 🎪Harvest report in my 1M² box with 16 plants (5 strains): Total 291 grams of dry, manicured buds. I set myself a goal of at least 300 grams. So I'm not entirely satisfied on this point. I think in the next grow I will use other techniques, like LST, topping and larger pots to try to achieve my goal!✌️☮️ ------------------------------------------------------------ 📜Links : 🌱 Seeds from the USA x Landrace collection of GreenHouseSeedco : https://shop.greenhouseseeds.nl/feminised-cannabis-seeds/usa-and-landrace-limited-edition/ Food for your plants 🔥🔥👍 https://www.greenhousefeeding.com/ 👨‍🚀My Instagram 🌱❤️️: https://www.instagram.com/hou_stone420/ ------------------------------------------------------------ ☮️Thanks for your visit💚☮️

the smell is too strong, i had to connect the carbon filter :)

🍀🤩

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Week#6 FLO.

Day 8 Flower - Sunday Aug 8 2021 -More growth -No Water, pot is getting light again Day 9 Flower -Feeding Day 4.7 Litres @ 6.41 PH / 1020 - PP -Raised light intensity to 6 -Introduced a framenting CO2 system (it’s not a sealed tent I’m aware that it’s probably not effective at all but it’s cheap and it’s better than none) Day 10 Flower -Not much to talk about -No water Day 11 Flower -Showing signs of possible phosphorus deficiency? -Will feed as plant seems dry enough - 3.8 Litres @ 6.03 PH / 447 PPM Monitor how she responds Day 12 Flower -No water Looks as if it responded well to feeding -Buds really coming along Day 13 Flower -No water -Defoliated and removed weak branches -recharged the CO2 system Day 14 Flower *NOOB ALERT* This is where I start losing it a little and my cycle of feed flush and feed and flush starts. -Plant not looking happy at all -Gonna do a full dose watering -4.8 Litres @ 6.22 PH / 1230 PPM no run off

Este semana he puesto en macetas de 11 litros los 3 bebés , he subido un vídeo con el transplante , también he usado 5 gramos de micro vida ( top crop) por cada 10 litros de tierra , mañana voy a regar porque han pasado 3 días , voy a usar green explosión (1ml/l) en el agua de riego(ph 6,0-6,5) y vía foliar(ph 7 ) , voy a regar con 300 ml de agua por cada planta

Germination date 🌱 29/11/2021 Day 56 26/01/2022 Strain 🍁 SinCity seeds Frosted Biscotti (Biscotti Sundae x Whitenightmare) THC% • Unknown 💡 Mars Hydro FC-E6500 • Power draw 650W + 5% • Max coverage 5 x 5 • LED 3978 pcs high quality chips • Max Yield 2.5g / watt • Noise level 0 DB • Removable Driver & Light bars • Daisy chain • Fast cool system https://marshydroled.co.uk/ 🇬🇧 PROMO CODE • (organicnature420) DISCOUNT https://www.mars-hydro.com/ 🇺🇲 PROMO CODE • (ORG420) DISCOUNT 👍🏻 ⛺ Mars Hydro 150 x 150 x 200cm 📤📥 AC infinity 6inch 💧 10lt dehumidifier ❄️ 3.1kw air con system 💉 Nutrients Living soil (dry amendments) Grow Bloom Bloom2 MycoBoost Barley 🌱 Growing Media • Soil Notes 📝 No problems at all girls loving life 🌱✌️🏼💚 just add water 👍🏻 Discount codes in bio for Mars hydro

Day 44-21/05/22 everything is looking good I might take them out tomorrow do some light defoliation and move them about abit not sure yet!!!! . Day 47-24/05/22 they look real good today!!!!

These ladies are lovely coming in at a respectable 27" and 33" tall. Not planning on them being the best yielders but the buds are juicy and stank like dank. I'm not great with smell but you can definitely smell pineapple or some kind of tropical fruit. Looking forward to these one ripening up only a few more weeks

Day 35 End of Week 5 Update: Had a bad week worrying about humidity. My dehumidifier broke so I was stuck until payday and humidity was out of control, night time into the the high 70's and mid 60s during the day. But despite that, thankfully there was no issues that came about like PM or funky mold or anything. New Dehumidifier is in and all is looking good Gorilla Cookies is definitely stretching out more than Strawberry G. The Strawberry Gorilla has more of a bushy tendency. I'm hoping she's just a late stretcher so we'll see 🤞 I started light defoliating and so far so good. I don't take out much and with the little I have trimmed there has been no sign of growth pause or stunting at all, they seem to be going strong so far. Happy Growing y'all!

Week 1 to today Week 6

Week 9 Here we go with the updates We've been adding nutes twice a week @1800ppm every 4/5 days Day 70 She's been doing good Growing like a monster! Day 71 Very well Day 72 More LST Day 73 Schedule for 20/24hrs Day 74 Time to feed them again Floranova bloom plus water I have been watering her lil every day early morning and before bed just sprinkle some for extra humidity but not much just to recreate some good environmental flow. Day 75 SUPER growing and added more soil Day 76 End of week 9 Doing very well growing fast and good