Everything is fine and they doing awesome They are in week 6/7 ish and some start to fade nicely. It’s hard to tell exactly when week1 started. I saw some pests(spider mites& caterpillar)attack one some leaves and remove those and hopefully mites don’t spreading to much.because spider mites love hot long days and low humidity and the days getting shorter and cooler day by day. I check them every 30 minutes to make sure everything is fine:)

- The trichomes photos have been taken just before the harvest. - Drying was made between 22-23°C and at 55% of humidity (3 days). - Curing before smoke test : 15 days Veg time : 31 days Flowering time : 42 days Total time from seed to harvest : 77 days Height : 26.5cm Pot size : 1.5l COMPARISON BETWEEN THE FOUR PLANTS : -------------------------------------------------- The best plant : Pound Cake - biggest plant, roots and buds. The best yield : Even if I didn't manage to trigger my scale, it's the Pound Cake. The best smell : They all smell pretty good. But the strongest smells were Pound Cake and Orange Sherbet. The best high : I can't tell, but I liked them all 😎 My favorite overall : Pound Cake👌

Just letting them chill. Water when needed. Switched to spring water. Tap is to heavy. Fingers crossed with growing grass with my grass. Trying to make a better soil platform for my conditions.

Autos autoing !!! Dam e things are crazy!!

Die Hawaiian Rainbows macht sich mega. Heute hatte ich noch eine Blätter weg genommen und gleich gelollipoppt.

Day 28 - RH 58% Temp 81F . Ladies are growing great, they are really starting to turn into little bushes & the double mainline is going strong 💪🏻 Thanks for following friends & make sure to check back for daily updates! Happy growing✌️🏼🌱 Day 29 - RH 57% Temp 78F . Couldn’t be happier with the growth! Day 30 - RH 60% Temp 78F . Everything is looking great! Day 31 - RH 51% Temp 78F . Watered today with PH at 6.5, all 3 ladies are doing amazing!👍🏼 Day 32 - RH 53% Temp 81F . Considering topping the ladies tomorrow not sure yet! Still growing beautifully! Day 33 - RH 52% Temp is 80F - Bushing out like crazy & growing strong! The double mainline seems to be bouncing back as well! So far very impressed with this strain😍👍🏼 Day 34 - RH 56% Temp is 79F - Decided to top the two bushy plants today, they also got fed today with PH about 6.3

Start of week 7 for the OG Kush and blueberry. Second repeat of week 5 feeding for the super lemon haze as she's on a 10 week schedule. OG's are super sticky, smelly and packing on thick dense buds, blueberry is bulking up, but not nearly as much as the oG. The SLH is also pumping out nice buds, that are very sticky. Very happy with this grow so far.

Black Cream Starting To flower. Beautifull plant.. It as came to the first scrog level. Started Training. Dont know if it let her got or make another scrog level. Please share your ideias. Scrog Its new for me but in small budget space i get it. ... this its the way to go. Bomberry its a slowstarter maybe gave her a little more water in seedling fase. The pots are big and it was dificult to control seedling moist at begening.... Killed 3 seedlings. Wedding Cake looking good Purple Couscous Tink its going to be another beast. Share Idias. Sensores with possibel integration. i will make it work. Hope You Like This Diferent Aprotche To The Culture

4.7.25. Just finished up with germination and seedling stage. First week of veg and plant is at 3rd internode so time to tie down method! Thanks for checking out grow

Very good week. The new plants are 24 days old. That’s how they are supposed to look at that age! They will be much bigger plants than the others because all was dialed in for this new batch. With autos there can’t be anything off or they won’t really get to big (typically). The older plants 6-8 weeks old - will be excellent smoke still just not as big as they can get. Start of week 9. The smaller plants are 31 days old. All looking very very good. I upped the cal/mag The TD and LS will harvest in around 3weeks. I always run them close to 1-2 weeks past recommended. They really frost up and gain weight the last 2 weeks. Excited about the new plants. When they are dialed in I’ve gotten 3-7 Zips from each plant. Pretty amazing for soil grow. Hydro is faster in the beginning and sometimes the entire grow but soil when all on point can keep up with hydro (after a few weeks) and lots of time surpass hydro. Definitely in taste and terpenoids. Happy growing! Any comments appreciated. I love learning about this wonderful plant!

💩Holy Crap Growmies We Are Back💩 Well growmies we are at 63 days in and everything is going as good as can be 👌 👉 So even with some major issues in the early stages , shes bounced back as good as expected 👍Or better 👈 Lights being readjusted and chart updated .........👍Even with early major issues due to the soil/medium she's come a long way 👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

First time growing an auto strain but turned out well. Great yield for one auto plant dried and cured Total height was 49.5” Used a 600W MH/HPS setup For side lighting I used a 4ft 54W T5 and about a 100W LED

here they are! 2 beauties. I plan to apply all existing stress techniques to them. topping LST HST Mainlining and so on. Most likely I hang them in one pot. I have experience growing 2 plants in 1 pot and it works great.

1 royal crit brought to harvest. Happy with the grow the RQS Royal Critical are well worth a grow huge yield across 3 plants. When the last one is done mid June i will update the final dry yield.

Week 3 (1-7 to 7-7) 1-7 Temps: 22.2 to 26 degrees Humidity: 50% to 70% 2-7 Temps: 22.2 to 25.2 degrees Humidity: 49% to 73% Watering: #1: 80 ml. #2: 77 ml. PH: 5.8 3-7 Temps: 21.8 to 25.3 degrees Humidity: 52% to 78% 4-7 Temps: 22.2 to 26 degrees Humidity: 36% to 64% 5-7 Temps: 19.7 to 24.5 degrees Humidity: 45% to 62% Watering: Both 1.5L I transplanted the girls in the early morning to 18L AutoPots. I use the airbases with an airdome, and a airstone connected to an airpump. As for the soil i use Plagron Coco-Perlite 70/30. After i transplanted them i moved them into the 100x100x180cm tent. The light is at 40% strength with a distance of 60 cm. Im happy they are finally transplanted into the AutoPots, My plan was to do this way sooner but i forgot to buy the root disks. So i had to wait till they arrived, and with the legalization in Germany there is a huge delivery time. 6-7 Temps: 18.8 to 25 degrees Humidity: 41% to 64% 7-7 Temps: 18.8 to 25.5 degrees Humidity: 44% to 57%

Day 60 flower Just a little water for the girls this week. Took a couple of stems off each plant this week so I don't run out . Tent is really stinking .

Strawberry Banana start flushing

Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?

Second topping!