Welp found some foxes in the hen house lol found a few boys 10 days into flower no biggie 3/5 were males so I got em outta here sometimes identifying in late veg can trick you you see those pre hairs 😅 definitely shows sex in early flip to flower so now I have 1 infected mind and 1 HolyMolyDonutShop luckily I took cuts I threw the male cuts away and here we are you win some you loose some 🤙⛺️

Week 7 - Flower 3 Sangria - by Twenty20 Mendocino 4Q 2022 Veg Week 4: Wednesday 01 February - Tuesday 07 February 2023 Start of Veg - 1 Node Start of Week: [ 2022-02-15, SA20 50:B3:7:1] End of Week: [ 2023-02-21, SA20 56:B3:7:7] HeightWeekStart: [ 10.5, in] HeightWeekEnd: [ TBD, in] Start Date: 28.12.2022 # Seeds Wet Harvest Window: 17 - 27 March 2023, 79 - 89 Days EnvironmentGermination - LightDistance: [ 14.5, in] - LightStrength: [911, 505, µmol/m2/s] - Temp: [ 79, 85, °F] - RH: [ 73, pct] - HumidifierTrigger: [ 69, %] Fertigation (BioAg, Mammoth-P) - [x] R&R/Recalibrate BluMat’s at next IDEAL pot moisture __________________________ Wednesday 15 February 2023 SA20 50:F:7:1 Thursday 16 February 2023 SA20 51:B3:7:2 Friday 17 February 2023 SA30 52:B3:7:3 - Blumat watered to 400 ml Runoff. Turned sensor knob 1 pt Tighter. - Nonetheless - plants look Awesome, and Saturday looked Better!!! Saturday 18 February 2023 SA20 53:B3:7:4  - Adding BioAg CytoPlus to Res - Ful-Power: [ 20, ml, gal], CytoPlus: [ 1.25, gm, gal], Photosynthesis Plus: [ 6, ml, gal], SLF-100: [ 5 ml, gal] Sunday 19 February 2023 SA20 54:B3:7:5 - After EMPTYING the Reservoir yesterday - Sangria is cranking her transpiration, pot is demonstrably lighter. We’re cooking w/ Gas!!!! - Added CytoPlus cited yesterday    Monday 20 February 2023 SA20 55:B3:7:6 - [x] Crank Light to Maximum Height & Reset CORNERS @500 PPFD (For full Light penetration) - Monitor TEMPs (May have to reduce to maintain cabinet temperature < 82 °F - [x] Monitor TIPS for Light Burn as we’re 200 PPFD Above Optimal CORNERS  CENTER  Tuesday 21 February 2023 SA20 56:B3:7:7 - 0800 Look, bleh - an hour later - happy. And it looks like SHE WAS WATERED AGAIN. - Basic goals - Raise Light to maximum, adjust light w/ Dimmer. Min Corners ~500, Max Center 1000, PPFD - [x] Adjust dimmer to nominal 500 PPFD in Corners - [x] Turn BluMat down 2 pts - [x] Raise light to top of Cabinet # I want it DRYER IN THE BOTTOM than BluMats current setting. Light DistanceCanopy: [ 15, in] Light DistanceCenter: [ 13, in] WaterAmt: [ 1350, ml, day]

Hello! Just a flush between waterings with bloombastic! Some orange hairs and they keep getting fat! The purple colors are already and they are beautiful!!! Thanks dutch passion gore the seeds! Hope you like my diary of this 3 sucessfull Skywalkerhaze! Im very happy with the results.. i Will put again!

They’re rockin as of day 21

Diese Woche ist eine kurze Woche. Die Damen werden jetzt aufgrund ihrer Größe in die Blüte geschickt. Tage der Wachstumsphase = 32 Tage. Größe beim Start Blütephase= 24 cm Mehr gibt es in diesen paar Tagen nicht zu sagen Lichtstärke: 50% Lichtabstand: 40 cm Std Tag/Nacht: 18/6 Temperatur Tag: 23-24,5 Grad RLF Tag: 55% Temperatur Nacht: 20-21 grad RLF Nacht: 50 % PH Wert Wasser/Düngelösung: 6,4 EC Wert: 0,15 Ventilator Oszillation: Stufe 1 Befeuchter: aus Entfeuchter: mit Steuerung an Bewässerung: 1* Wasser Controlling: Grow Control Dünger: Greenbuzz Nutrients Licht: Pro Emit Vollspektrum Abluft: EC Carbon Active 750 m3 gesteuert https://greenbuzznutrients.com/de/ Danke an den Sponsor Greenbuzz 25 % Rabatt bei der Nutzung des Codes auf der GB Homepage https://greenbuzzliquids.com/de/shop/ Code: GD42025 Likes 7

👉 This is the first staggered harvest I have done. The highest parts of the plant were definitely ahead of each lower level of flowers. So it made sense to give this a try. Also, there were so many sugar leaves in the flowers I knew I was facing some major trim time. So I started at the highest branch of colas and that was the main stem…what I call the Queen cola, on April 4. I was also very busy with work and life so I spaced out each successive branch by a day or two…or so. To harvest I would cut each major branch from the top down. There would be one major cola ( and best specimen) on each branch. That cola was trimmed so it was still on its stem and then weighed. I recorded the weight of the cola then assigned it a letter, put on a clothes pin, then hung on a rack. I would weigh the cola over a couple of days till it had loss 75% of it wet weight. I would cut from the stem for the final weight, then place in a jar with a hygrometer. I would monitor the jars and if they were above 62% I would take off the jar lid, then replace when humidity was back down. When stable I put a humidity pack in some of the jars, but not all, just to see if I can observe a difference after the cure. 👉 My last trim penance was served on May 1. Almost a full month. The first cola harvested is already being tested. I did a close trim and removed as many sugar leaves as possible. I think I spent over 10 hours in total. So glad I chose to stagger the job. I trimmed any frosty sugar leaves over a trim tray with a screen for a bottom. I also scissored a bunch of the larf buds into small bits to add to the trim. I made a nice small wafer of just trichomes with no plant matter. Very nice, sweet stuff. I’m letting the large pile of trimmed sugar leaves dry out till crispy and will hand grind them over that screen and press the kief produced into pucks. It’s green and has lots of plant material with it…but its still sweet, and a very nice topper to a bong or joint. 👉 There were a lot of nice buds of what I call secondary flowers. Those were on secondary branch ends mostly. These buds were placed on a dry net. After 24hrs, I placed them in a paper bag. When they had lost 75% of their wet weight they were put into a jar with a hydrometer. Almost everything that wasn’t a branch end flower was put in the larf bin. Lots of larf. I didn’t weight any of it dry and just the wet weight from a couple of branches. I plan on making bubble hash and extracts (oil and tincture) with the larf. Of course planning and doing are two separate issues. I have acquired all the proper gear and done lots of research. I am also experimenting with the drying environment. In the past I was using a direct fan to oscillate directly on the buds for 24 hrs. At 24hrs the buds were put in bags and also kept them in direct wind. After a couple of branch sets I decided to stop oscillating the fan and make the breeze indirect. I still put the buds in bags after 24 hrs and kept the wind indirect. It took a few days to get to 25% doing it this way, as opposed to 2 days in bags with direct wind. The slower is supposed to be better, but risks moldy buds. I’m not doing everything the same way so I’m curious to see if there are perceptible differences in jar aroma and taste. To further complicate things to eye-roll status, The staggered harvest should have improved the lower level of flowers to the same ripeness. I can honestly tell buds from the same plants taken at different levels. The lower ones are noticeably weaker. I won’t start testing to see if there is improvement till the flowers are at least 4 months cured.

💨 ⛵️

Welcome growfessors! Harvest time for Do-si-dos! This gal is looking great after her last week in the tent. She developed a little foxtailing over the past week, but she did bulk up, pack on more frost and is sticky as molasses! July 11 dry weight of 83 grams. Smooth smoke, mellow flavors.

Hun er virkelig sød og dejlig og hun er virkelig smuk og spændende og se på hun . Jeg har gang i et forsøg med at hun kun skal lave topskud og gerne 3-4 pr gren ;) pt ser det ud til at lykkes. Håber i vil være sød at rette mig hvis i ser fejl ! Jeg overvejer brug mit sidste frø i DWC :)

Nothing new this week. She's still growing steadily and the nutes seem to be doing a good job so far. I'm using the Dual Fuel with a bit of Growth Solution to raise the EC to follow the Green Plant Nutes program and it feels like it's right so I'm keeping like that. The light is set to 100% as the plants are healthy and the weather is getting a bit too cold. I upgraded my second inlet fan from a generic 150mm ball bearing fan to a 125mm Phresh Hyper Fan V2 w/ speed control. Now my tent is so much quiet with both Hyper Fans V2 working on blowing fresh air in and out. Maybe I get a Phresh Hyperfan V2 Climate Controller to manage them automatically next upgrade.

Day 63 - add about 0,5l of soil. weight of pot from 3,0kg to 3,6kg Day 64 - Filling. ppm 460. weight of pot from 3,2kg to 4.3kg (1100 ml) Day 66 -filling. ppm470, weight of pot from 3,15kg to 4.15kg (1000 ml) Day 67 - fiiling. ppm490. weight of pot from 3,15kg to 4.15kg (1000 ml)

I did run into a few complications that hampered the grow.The 2 P's came into play on this one. PPM and PH I also had an issue with the pump art first but that was corrected quickly. I will grow this strain again in the future😎

Day 30: Let grow, no water no feed. Thick stalks, RapidStart doing an amazing job on those roots. Tent Temp: 77º RH: 53º PPFD: 700 VPD: .67 kPa Day 31: Cosmo is looking really good. Great node spacing and structure. Excited to see how she stretches in the coming weeks. Fed 4ml FloraMicro, 4ml FloraGro, 6ml FloraBloom, 2ml CALiMAGic, 1ml RapidStart, 2.5ml ArmorSi, 1ml Floralicious Plus, 1ml Liquid KoolBloom and 5ml FloraNectar. Solution Temp 70º PH: 5.8 PPM: 950 Tent Temp: 77º RH: 52% PPFD: 750 VPD: .66kPa Day 32: Cosmo looking good overall. Slight clawing on top fan leaves. Might be a little wet or maybe a bit too much nitrogen. Will let dry back and straight water next feed time. Tent Temp: 77º RH: 51% PPFD: 800 VPD: .67kPa Day 33: Let grow, no water no feed. Tent Temp: 77º RH: 52% PPFD: 750 VPD: .67kPa Day 34: Cosmo looking healthy and happy. Some more leaf tucking but no defoliation. Looking like a solid structure with good spacing already. Watered .5gl RO water PH: 6.1 Tent Temp: 75º RH: 55% PPFD: 750-800 VPD: .58 kPa Day 35: Looking healthy and happy. Starting to get a slight skunky smell in the tent. Tent Temp: 75º RH: 55% PPFD: 750-800 VPD: .58 kPa Day 36: Ready for feed again. Cutting out FloraMicro on this feed, Cosmo and + Speed(s) showing slight signs of nitrogen toxicity. Fed 4ml FloraGro, 6ml FloraBloom, 2mg CALiMAGic, 1ml Floralicious Plus, 2.5ml Armor Si, 1ml RapidStart, 1ml Liquid KoolBloom and 10ml FloraNectar PH: 6.1 Solution Temp: 71º PPM: 925 Tent Temp: 76º RH: 52% PPFD: 750-800 VPD: .67 kPa

Рослина росте активно, все ще застосовую ЛСТ, на добрива реагує добре, але пожовтіння листя продовжуєтся (Я думаю, що все не так критично, бо жовтіє тільки листя знизу, яке не отримує світла) Запах став трошки сильнішим, але він все ще слабий. Схожий на якусь пряну рослину + лимон + запах зелені. Поливаю за схемою вода - засуха - добрива - добрива - засуха - вода

Chop Day! After recovering, i noticed she had the leaves closest to the fan drying up. I think since she lost most of her leaves, it was too windy and she got windburned. Considering her over all bad shape i decided to go for an earlyer chop then usual, but all trichomes seem to be milky, with just a few brown ones. Over all, this grow was filled with problems and fuckups. Many things were learned :) May the next one be better!

thanks for the comments guys ! im switching to 20 hour of light tomorrow

After I repotted the plants, they grew really well and healthily for 12 days. Now they are showing iron deficiency again... I already had the problem before repotting. The pH value of the earth has fallen again to 4.8 to 5.7. This time I used biodegradable braids to germinate. I believe that this is the reason for the PH fluctuations in the soil. Every time I water I measure the PH and adjust it to 6 - 6.5. Nevertheless, the PH value drops back to 4 to 5. I'm trying to correct the problem. I also work with neemoil because I can't get rid of the trips

Sorry I didn't update yesterday. Been bending limbs down to keep a consistent height. Using LST and HST this time. Soon I'll be identifying which branches from which plants will make the final cut. I've been very rough on these plants and they all continue to thrive. But I've noticed a clear distinction between some that are fast growing and some that are slow growing, under the exact same care. Since this is a relatively new breed I'll be interested in how they differ at harvest. I'm noticing most of my challenge now is to get the branches all at a consistent height for the switch at the ScrOG net. The challenge is not among individual branches, but among slower and faster growing plants. This would be much easier if I had a way to raise or lower whole plants in the grow. Not likely in a hydro setup, water seeking its level and all.