Likes
Comments
Share
Привет друзья, всем тем, кто следит за мной. Вновь обновляю свои дневники. Если вы следите за мной, то знаете, что на протяжение всей прошлой недели я брал клоны от своих растений. Вы можете следить за их развитием в соседнем моём дневнике. После того как я взял достаточное количество клонов, я сломал привычку растений выращивать один центральный стебель. Теперь я дам им немного покоя и буду наблюдать, как их внешний вид восстановиться после жёстких тренировок. Я даю растением небольшое питание, в основном из витаминов, гуминовых кислот и бактерий. Когда мои 50 клонов будут готовы к пересадке, я переставлю материнские растения в палатку поменьше и буду дальше экспериментировать над ними. Если вам интересно следить за приключениями травки в России, подписывайтесь на мои дневники
Likes
6
Share
@Averynate
Follow
Marijuana cultivation, like any agricultural endeavor, involves various techniques to optimize growth, yield, and potency of the plant. This is the week to make it happen! One such advanced technique is High-Stress Training (HST). HST is employed to control the growth pattern of the marijuana plant, making it more bushy rather than tall. This is beneficial for indoor growers with limited vertical space. Moreover, HST exposes more of the plant's foliage to light, which can lead to enhanced photosynthesis. This results in a plant that can produce more buds, which are denser and more potent. Given that light is a primary energy source for plants, maximizing light exposure can drastically improve the overall quality and quantity of the harvest. Topping is a specific form of HST that involves cutting off the main stem's topmost growth. This method forces the plant to divert its energy and nutrients to the lower branches, promoting the development of multiple main colas instead of a single dominant one. By encouraging a more even canopy, topping ensures that light is distributed more uniformly across the plant. This reduces the chances of having underdeveloped buds at the lower sections of the plant due to light deprivation. Topping also curtails the plant's height, making it more manageable, especially for indoor growers with limited space. HST and topping are integral for modern marijuana growers seeking to enhance their yields. These techniques address the spatial constraints faced by many growers and ensure that the marijuana plant receives optimal light exposure. The end goal of these methodologies is to increase yield and potency, and when done correctly, they can transform a mediocre harvest into a bountiful one. Cultivators who invest time in understanding and implementing these techniques stand to benefit significantly from their marijuana crops.
Likes
62
Share
@nonick123
Follow
Día 22 (11/11) Las plantas muestran pequeños puntos / zonas marrones pero... Don't panic! It's Organic! Dejaré que el proceso del Super Soil de BioTabs siga su camino tal y como indica el manual de BioTabs! Ajusto LST a CBD Auto 20:1 #2 aplicando una nueva atadura a la punta, que ya se estiraba hacia arriba 24 horas después! 💥😍 La idea es NO aplicar más LST y dejarla que crezca de forma natural a partir de ahora Tal vez solo ir recolocando las ramas laterales para que no crezcan demasiado juntas, porque no quiero estresarla y que ralentice su crecimiento... Día 23 (12/11) Subo a DLI 40 Pequeños ajustes de LST en las ramas laterales a CBD Auto 20:1 #2 para crear una estructura homogenea No voy a volver a aplicar LST a la punta, voy a dejar que crezca de forma "natural" a partir de ahora El resto de plantas están creciendo muy bien! Riego con 750 ml H2O RO a CBD Auto 20:1 #2. El resto no necesitan riego Día 24 (13/11) Riego todas las plantas con 750 ml H2O RO CBD Auto 20:1 #2 se muestra sedienta y vuelve a necesitar 750 ml de H20 RO tras solo 24 horas desde el último riego! Día 25 (14/11) Pequeños ajustes de LST en CBD Auto 20:1 #2 Parece que los puntos / zonas marrones se aceleran en todas las plantas excepto en CBD Auto 20:1 #1... Día 26 (15/11) LSD-25 Auto & OG Kush Auto empiezan a mostrar muchas zonas marrones y las hojas inferiores se empiezan a retorcer... Día 27 (16/11) Riego con 1 litro de H2O RO El area técnica de BioTabs me confirma que lo que muestra las plantas es una quema de nutrientes... 😢 Su recomendación es regar SÓLO con agua la siguiente semana (hasta el día 35 por lo menos) Día 28 (17/11) LSD-25 Auto & OG Kush Auto se muestran muy afectadas por la quema de nutrientes... Una pena porque estaban creciendo muy bien hasta ahora... Después de hablar con BioTabs, parece que el error ha sido aplicar el Boom Boom Spray demasiado temprano (en día 21) cuando las plantas tenían suficiente nutrientes y acababa de añadir la 2ª (y ultima) Tab al sustrato... Tengo que seguir aprendiendo que con el SuperSoil: MENOS ES MÁS, MENOS ES MÁS! A seguir regando SOLO con agua los próximos días... CBD Auto 20:1 #2 todavia no muestra el sexo (pre-flores)... es algo extraño... 💦Nutrients by Bio Tabs - www.biotabs.nl/en/ 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en-us/products/pro-mix-hp-biofungicide-plus-mycorrhizae "GDBT420" 15% DISCOUNT code for the BIOTABS Webshop https://biotabs.nl/en/shop/
Likes
152
Share
@EBxAH
Follow
This was such an amazing experience! The outcome could have been better but I'm happy and the quality is definitely there!!!!! Such a sweet tasting smoke with very relaxing, very creative highlights! I finally got to try this strain and I immediately see why it's a legend!!! Happy growing everyone ✌️🍀✌️
Likes
2
Share
Likes
11
Share
The cultivation of this specimen was good, better than I expected, without a doubt pure instinto It will be back in our tent
Likes
21
Share
Hello Growers and Tokers! 👋 👩‍🌾 🧑‍🌾.🔥💨 Info and pictures were taken at day 12 of flower. Nice progress this week. There's plenty of new growth. She hasn't grown upwards as much as the other ladies, only about 5 cm this week. BUT she's got a darker green color, stronger smell than all the others. It's smell is unique and very strong. Not sweet, VERY pungent, it's a slap in the face kind of smell. Her bud formation is also more advanced than all the other girls. That's something I need to watch out for because she's an early finisher. Supposedly finishes in 40 - 45 days. Feeding 1,5L each, every other day. Will be increasing as they ask for more. How do they ask for more? When feeding if the soil is drier than normal I give a 150-200ml increment of water. I do that until they stop feeding so much then i just maintain that amount. I start reducing if it takes longer to dry. That works good for me. The old finger in the dirt trick. 👍 Nothing like knowing exactly what your ladies need first hand. That's it for now. Stay tuned for next week's update. If you like what you see check out the other diaries. Take care and stay safe! One love! ✌️🏽
Likes
36
Share
Some of my beauties have little bit iron defficiency but.. i just bought FE+ nutritions So IT ill be fine i think Soo ..
Processing
Likes
8
Share
Buenas noches fumetillas, de nuevo volvemos, y es que estas green ak xL se están poniendo increíbles, son bastante delicadas a los cambios de temperatura y a las variantes en los nutrientes , hay que ser muy estable y cuidar en los cambios climáticos, si se consigue salen unas flores enorme y llenas de tricomas. Ph controlado, temperatura y humedad dentro de los parámetros correctos, 1 de los 2 ejemplares que quedan recibirá un lavado de raíces pronto, la otra seguiremos abonándola una o 2 semanas más. La próxima semana nos vemos familia.
Likes
4
Share
The first week of vegetation is complete, and the plant is off to an okay start! After spending 5 days in the seedling station, I transplanted it into a 15L fabric pot, which will be its final home since it’s an autoflower.🌱 Initially, things weren’t perfect—the first set of leaves turned yellow, likely because I forgot to add coco to the area where I planted it.😅 However, the plant recovered quickly and is now bouncing back nicely! One hiccup was the time-lapse footage—it’s a bit shaky because the fan was directed at the plant, causing some wobble. Overall, I’m optimistic about the plant’s progress and looking forward to seeing how it develops in the coming weeks.🌱 (the plant in the little pot is my first phenotype Runtz muffin from barneys farm that i got gifted and i am getting the setup right now)
Likes
3
Share
Likes
5
Share
I transplanted all but the runt, because I was too busy this week to deal with everything. Still top watering for now, because I want the roots to get lower first before using the autopots.
Likes
10
Share
@3lementa1
Follow
I think I trained too hard too late in harvest. One of the Wedding Cake plants went hermie and pollenated everything. I'm disappointed but I'll be more gentle at the end of flower next grow. The buds were still good in a vape but I had to be careful of the seeds. I made hash from most of it.
Likes
3
Share
@clstr8
Follow
4-22-20: Ive added 2 tsp Tiger Bloom into the 1 gallon water feeding. Im still only watering 2 times max per week. Only feeding when pots are light. Every other feeding is room temp 6.5 ph water. 4-23-20: noticed some yellowing on lower fan leaf. Mixed up a gallon of Grow Big and equally divided it between 5 plants. Hopefully that stops it. And being so early into flower, a little nitrogen wont hurt or cause nute burn. 4-25-20: gave all 5 plants a trim. Plenty of light to lower bud sites and responding well.
Likes
13
Share
@J_diaz420
Follow
En algunas #redhotcookies, las más espigadas les pode el cotiledon y el primer nudo para que en el día de transplantes, quitar el espigamiento enterrando bajo el segundo nudo. El día 20 se hace transplante de 1 a 7 lts, y se procede al primer amarre desde el tallo a la maceta para empezar l.s.t
Likes
41
Share
Watered with 1 gallon of the above listed nutrients! 95% dry, and ready for another dose in 5-7 days! I removed both branches, in the second node position on the trunk, and LST'd her down in the direction of the removed-downward-node. She has 5 remaining nodes, that will be trained out, away from each-other. All nodes are receiving equal, full light.
Likes
2
Share
Day 44, growing well.. One pheno has strange branch development. First time seeing this, she topped herself :) you can see on video.
Likes
24
Share
The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) A seed germinated via skotomorphogenesis (in the dark) will generally develop faster in its initial stages to reach light, though it will be etiolated (elongated and weak) and will switch to slower, more robust photomorphogenesis (light development) once it emerges into light. While skotomorphogenesis is a rapid, growth-oriented process for soil escape, it's a temporary phase; photomorphogenesis is a more sustainable development program that prepares the seedling for photosynthesis. 18/6 with the 6 being IR instead of darkness, keeping temps overnight a neat 77F-80F. PPFD overnight 1.8. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches 50% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over, this creates a strong pressure differential which will work wonders on your grow. replicating high and low pressure fronts in nature, critical for oxygen diffusion, but more importantly, full control of your RH%. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, resulting in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow slower to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.
Likes
12
Share
@Shinobi
Follow
4 už sú dole.🤫1 ešte týždeň.má byť zlé počasie.veľká spokojnosť🤩🤩