Recommended
Likes
Comments
Share
You can find tbe first week of all girls on my profile, second week is missing coz its just boring and now i start week 3 so its day 15 today from placing seeds to germination. Uploaded a video of their habitat, i still wont name each one indifidually coz i still didnt choose winners / keepers. Unfortunatelly i have a bit low RH for this stage of growth but they obviously dont mind, i spray them twice a day, no burns from spraying with lights on, no electroshocks caused by spraying so all good now. I tried it all enough to be able to say i cant be assed anymore :D Since @growdiaries are not keen on resolving a problem with uploading each pic individually on androids, i will keep one diary for all girls, dont even mind not being able to compete in dom. Stay tuned these girls will rock.
Processing
Likes
24
Share
8/9 shes flowering💚 pistils everywhere. Been feeding with open sesame from fox farms and everythings looking awesome. I am concerned about how lanky she is. Her node spacing is tight but shes long and the branches are already drooping from the weight from pistils and new leaves lol fml im gonna have to get stakes/supports soon 8/10 shes loving the weather or the nutes, shes praying so fucking hard its beautiful
Likes
162
Share
@nonick123
Follow
Una cosecha emocionante después de todas estas semanas Ahora, a esperar los 30 días de curado y la cata! 😍
Likes
38
Share
Utopia Haze is a rare heavily sativa dominant hybrid (90% sativa/10% indica) strain created through back crossing Brazilian Sativa strains. This tasty little bud took home 1st Place for Best Sativa in the 2008 High Times’ Cannabis Cup and for good reason – with its potent 18-22% average THC level and long lasting cerebral effects, Utopia Haze is one powerhouse smoke. The Utopia Haze high comes on soon after you finish your first toke, hitting you with a strong cerebral lift that infuses you with a sense of hazy relaxation. Type: Feminised/Photoperiod Cultivation: Indoor/Outdoor Flowering Time (days): 70-75 Indoor Yield (g): Up to 650 Feminised Outdoor Harvest Month: October Feminised Outdoor Harvest Month Week: 3rd-4th week Aroma: Citrus, Woody, Pungent, Mint Effect: Cerebral Lift, Hazy Relaxation, Sleepy Welcome Everyone to the Final Entry of my Utopia Haze Grow ! There is so much to discuss ! I have been extremely busy as of late trying to get this Harvest together, but i am happy to have it here for you now ! I Seriously under estimated the amount of time, help from others, and my own necessary skills to pull this off.. and i still kind of screwed it up lol ! But its worth noting i have never actually done this before and trying to document it during....was extremely hard. It is next to impossible to work an iPhone with rubber gloves on ! First I want to discuss everything step by step so before you jump straight into the comments on how the end product is so small in "quantity" Rest assured i am happy with its"quality"...and thats all that matters to me because Life is a journey not a destination! and i have learned so much from this grow that I couldn't be any happy even if i messed some things up :) But at the very least I hope you read through this entry in its entirety with an open mind and focus more on the process, rather than just the outcome! I ran out of Ice & i was only able to wash three times..(normally I've heard you should go sometimes 5-6 washes) Preparation is Key & things will be much better next round :) Photos 1-22 These are pretty self explanatory but for those of you just tuning in now.. this is what happens to a very happy plant when you don't have the necessary tools to monitor key components of growing cannabis.. Ph, as well as EC levels play a very key role in the outcome of your grow lol that being said I was just able to save this plant by purchasing both tools but that doesn't mean the plant didn't suffer because of the prior events.. This was a Huge reason behind me choosing to turn this harvest into what i would consider "Solventless Hash Rosin" from "Ice water extracted Bubble hash". Pictures 23 The idea here is the process of using "fresh Frozen Cannabis" this has been discussed many a time online on such sites as instagram and here on grow diaries as well.. I personally have Never tried the process so i decided to try it out and make a judgement for myself.. Video 24 The Cannabis has now been in the freezer for 72 hours making it very well frozen.. as you can tell i struggled getting it all into the 25u Screen Wash Bag. One thing of note i would do differently is i will de-stem my next batch as i also believe this played a part in the amount of plant matter that escaped through the sieves. Photo/Video's 25-28 The idea here is "ice water Seiving" & especially with the bags that I am using here that are only have screen material on the bottom portion of the bag it is very important to have spaces in-between the screens to allow the water to pass directly through the screens into the bottom bucket with the least amount of resistance.. because the hash is so extremely temperature dependant if it gets warm on the side of the bag.. it will stick there and not make it to the bottom to become use able product.. 29 You do not need to use as much Ice as i used here lol... the idea is to keep everything very cold..i certainly achieved that but at the sacrifice of using so much that i ended up grinding product and producing "contaminants" but in the end they are just plant matter that i would be smoking when i rolled up my joint either way so.. I'm not super disappointed.. But it should be noted that what you want to achieve here is a Layering effect where you have the wash bag between two small layers of ice while the "water current" washes the Trichomes away allowing them to be separated by the screens setup below :) Before Starting the machine you should allow some time (i.e.;10-12minutes pre soak to allow the product to become saturated) before the first cycle. By video 32 I have just ran out of ice lol.. Video 33-34 Here I have a tip for you.. to separate the screens that you sieve through.. cut 5 gallon buckets to stretch them across nice and tight.. it'll make scooping your Bubble that much easier ! i learned this from the many "Frenchy" videos I have watched :) Picture 35 Here in lays the problem for most people.. drying your hash without loosing vast amounts of "Terpenes" whilst also stay ever vigilant against mold ! Thanks to all those videos I've watched on youtube.. id like to think this was one of my most successful parts of this process.. Things to Note; Terpenes start to seriously evaporate at temperatures 68F or 20C you need to stay as cold as possible whilst bringing the Relative Humidity in the space down into the 40-30% to stay away from that nasty mold ! I used my cold storage room in the basement.. with a dehumidifier running to keep the space at 45% RH & staying at a constant 15c. All while spreading the hash as thin as possible across parchment paper, on top of the white screens with a fan moving air across both sides of the paper. Pictures 36-38 These are some macros i took in the middle of my drying session I fell in love with the colour. Yes i know the black spots are plant material but they will get caught when i bag the hash & squish the oil out. Thing to Note; at this stage it is important to ensure you 'micro plane" the hash down as fine as you can whilst staying weary of the temperature... any "chunks" will hold pockets of moisture.. that lead to potential problems..ie; mold ... Picture/Video 39-41 Successfully planed bubble hash ready to be bagged and Squished ! Picture 42 Ive decided to follow Pedro.. from Pedros Grow Room and double bag to be on the safe side so i don't have any blow outs. So thats One 25u bag inside one 160u bag ! :) Pictures 43 This is almost 3 grams of the bubble hash from above, already melting in the bag.. this is where i ran into trouble again lol things started getting to warm in the house and i was only able to get one of the three squish's i did on video :( things started getting sticky. Picture 44 This is basically just a photo of the equipment I'm using; 3x5 LowTemp Cage in the frame I built myself, with a 20Ton bottle jack. Something to note here is this is an older Lowtemp model with only a single heating zone which is which i have it closed here heating Both sides of the press :) As well as the importance of having adequate pressure on your plates.. my rig is very overkill for the size of hash bags..lol Video 45 Here is the lovely press video.. its didn't quite work the way i wanted either lol my directional folding wasn't quite tight enough for a big "drip" :) &the Press was set to 65°c Photo's 46-50 are pretty self explanatory :) I had a blow out.. but still managed to pull an 80% return from the hash once squished...& yes it tasted amazing :) Was it worth it in the end... that could be debated.. for some..i understand..its not your thing, but for those of us that are interested in making our own concentrates.. free from Solvents... I wouldn't make it any other way :) If even ONE of you reading this diary finds it helpful to reference for ANYTHING.....even if its "what not to do" ill consider it a success ! Thanks again for tagging along on this garden adventure.. its been one heck of a journey ! Much Love from B.C. Canada, Until Next time, Cariboo
Likes
19
Share
@4Haut
Follow
Hi@all, it is the end of the fifth week, I started some low-stress training to bend the lower branches towards the light. It worked really well. Three days ago, I topped the "head". I hope she's recovering from it in the next days/week. So far, everything seems to be going well and it’s really enjoyable. 😎🌿 My only concern is the 40x40 cm tent – I think it might be a bit tight in there... Greetings ✌️
Likes
4
Share
Well, boys and girls and those who don't differentiate, it's Weed Doctor Sam here and I'm about to fail gloriously or succeed by the skin of my teeth. This being my first grow -- of any kind, let alone a hydroponic grow involving (potentially) advanced training techniques -- I fully expect things to go wrong. And, well, golly... wouldn't it just be fun to watch? Tune in week to week to see what goes wrong, what goes right, and what goes just luckily enough not to fuck up the whole grow. Update to this week coming at the end of Week 1. Until then, may the rain fall soft on your fields.
Likes
13
Share
Slowly but surely, it's growing all right. The plants are keeping low and bushy. I have three plants, each with 3 different heights. One normal, one growing sideways and one that's kind of a dwarf. Only 3 months to go!
Likes
65
Share
Day 44: Watered the plants 0.5L with nuts 733 ppm, 1468 us/cm, PH 6.4 I am doing lst every other day Did some defoliation Day 46: Watered the plants 0.5L with nuts 684 ppm, 1444 us/cm, PH 6.4 Did some defoliation Used neem oil to prevent pests
Likes
11
Share
@tangie
Follow
Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?
Likes
58
Share
Die automatics: fat banana wachsen alle gleichmäßig und gleich groß. Sweet zz wachsen 3/5wie die fat banana, 2 sind kleiner, wachsen langsamer und etwas krüppelig, aber mit etwas Zeit verwächst sich das erfahrungsgemäß. Die feminisierten: 1/3 critical Wächst normal, 1keimling wurde von bodenorganismen angefressen,aber kämpft noch ums überleben,1 ist nicht gekeimt. Also mittlerweile 2/3. Special queen #1 hat von der keimrate enttäuscht. Als Bonus seeds sollten sie besser keimen als 2/5... die beiden, die keimen, wurden auch von bodenorganismen amgeknabbert, eine hat es geschafft, eine kämpft noch. Wie letztes Jahr hab ich wieder n paar bagseed gezeigt.2 Samen aus meiner letztjährigen Northeim lights auto und 3 aus der letztjährigen fat banana Auto. Mal sehen, was das wird.... i love surprizes stelle mich drauf ein, dass die ruderalisgene sich nicht durchsetzen und es ganzjährige werden. Werden klein gehalten .Will mal testen, ob man mit seeds von Autos was anfangen kann.. Also bisher spielt das Wetter mit(das ist die hauptsache) und warme, sonnigen Tage sollen kommen. So muss das. Bis nächste Woche :)
Likes
6
Share
Die 3x Tropicana Cookies Autoflower von FastBuds sind sehr schnell gekeimt. Sie wurden in einem Glas mit klarem Wasser gekeimt. 💦 Es hat ~3 Tage gedauert. Dann ging es in den Lightmix von Plagron.
Likes
48
Share
Hey everyone 😁. Today I start the next aeroponic round 😃. Since the last 3 runs were with my Gelato (Black Pheno) from Zamnesia, this time I will put my Kosher Tangie Kush Phenotype from Amsterdam Genetic in the Growtool 0.8 😃👍. Of course, the Gelato (Black Pheno) will continue to be used 👍. The entire system was cleaned with alcohol and everything checked for functionality :-). I took 6 cuttings from the little Kosher Tangie Kush mother, of which only one remains in the end (the best). As always, the water was mixed with osmosis water. The following was added: Canna Rizotonic: 3.5 ml per l Cannazym: 2.5 ml per l Canna Cal / Mag: approx. 0.2 l per l. Since this time I want to do a ScrOG with a single plant in the Areo system that fills the whole tent :-). similar to the second gelato run where I did the ScrOG with 3 plants 👍. The clones were placed under plastic hoods and sprayed so that they had enough moisture to root. Now they get 10-14 days to root, then we'll see which one is left over :-). I wish you all a lot of fun until the next update. Stay healthy and let it grow 🙏🏻🍀. You can buy this Strain at https://www.amsterdamgenetics.com/product/kosher-tangie-kush/ Type: Kosher Tangie Kush ☝️🏼 Genetics: Kosher Kush X Tangie 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.2 - 5.8 💦 💧
Likes
36
Share
@SAC87
Follow
Day 84: Well after flushing down to 50 ppm the Blue Dream is done. They’re sitting in the dark cool tent for a couple days. They smell so much. Intense blueberry, sweetness. They faded out quite nicely. Unfortunately the upper fans were ruined by lockout. I will be happy to get these jarred up to keep the smell locked down. My carbon filter can’t keep up. There will be more to come in the harvest entry. Happy Growing 🌱
Likes
19
Share
@BLAZED
Follow
Week 15 Harvest 21-2 Temperature: 29.7 degrees (lights on) 19.9 degrees (lights off) Humidity: 67% (highest) 44% (lowest) Watering: None. 22-2 Temperature: 29.9 degrees (lights on) 19.9 degrees (lights off) Humidity: 65% (highest) 41% (lowest) Watering: None. Today is the last day, tomorrow i will harvest her. I removed all large fanleaves and took some pre-harvest pictures. 23-2 Today is harvest day! I left the buds on the branches and hang them to dry. Temperature: 18.1°c to 19.9°c Humidity: 57% to 72% 24-2 Temperature: 17°c to 18.8°c Humidity: 56% to 64% 25-2 Temperature: 16.8°c to 17.9°c Humidity: 57% to 69% 26-2 Temperature: 16.2°c to 18.1°c Humidity: 56% to 61% 27-2 Temperature: 16.2°c to 17.5°c Humidity: 55% to 61% 28-2 Temperature: 16.3°c to 17.6°c Humidity: 57% to 64% 29-2 No info. 1-3 Temperature: 17.8°c to 18.7°c Humidity: 56% to 61% 2-3 No info. 3-3 Temperature: 16.5°c to 20.3°c Humidity: 46% to 62% After 8/9 days of drying the buds are dry enough, so lets start trimming! The buds are pretty airy and foxtaily, but very resinous, she smells good, but i think the buds are a bit overdried. End results: Trim: 18.12 Gram. Popcorn buds: 37,11 Gram. Normal Buds: 70,98 Gram. Total buds: 108,09 Grams. I will post the progress of me making bubble hash in this diary very soon, so if you are interested make sure to keep an eye out!
Likes
9
Share
@Chucky324
Follow
Hello. This is the end of week 9 and the beginning of week 10 of veg. Had my 4th year cancer check-up and passed... Doctor couldn't find anything wrong. So I get to wait a year before my next/last check-up. If I pass that check-up they declare me cancer free. 😁 Thanks Rick Simpson.... Got this magazine a couple of days ago and wanted to show some of the weird adds and the articles. There is a Cheech and Chong story and interview in the Captain Future diary, and a Cheech story and interview in my LemonPaya diary. If your a fan of them have a peek at this weeks... Things are going well in here. The plants are stretching to fill out their areas. Plant #1 looks like it going to be a big plant with inches between leaf sets. Nice tangy smell though. Thinking of putting these girls into flowering around June 1st. And harvesting around Aug.15 or so. Got the tent so I could flower when the sun is strong, middle of summer. Not the weak ass fall sun where there's lots of mold and fungus. OK. Keep Growing Straight. Chuck.
Processing
Likes
58
Share
So what I have to say?) I am proud of little beauty girl)) I am going make harvest in 2-3 weeks... I am really waiting for harvest day...😋 Day 52. I add 2l water with 4ml "sensi cal-mag extra" from "Advance nutrients". Day 53. I did some modification to increase mass...
Likes
55
Share
@Reyden
Follow
Siamo nella terza effettivamente e non nella seconda come negli aggiornamenti, sono andato un po’ oltre con i tempi e quindi ho slittato di qualche giorno…le 2 Royal Gorilla 🦍 iniziano a mettere calici negli internodi superiori e piccoli tricomi iniziano a formarsi lentamente…iniziamo a dare meno Azoto e più Potassio e Fosforo per favorire la fioritura e farle smettere di concentrare sulle foglie ma andare sui fiori, si vede che sono due conformazioni differenti, le Gorilla Glue di Zamnesia hanno foglie grosse e larghe, mentre le Gorilla di RQS tendono ad avere foglie più strette, più da Sativa, Anche se in effetti sono ibridi 50-50…dipende dal fenotipo ecc…continuando e tenerle al sicuro ti ringrazio di essere passato a trovarmi e se ti piace quello che faccio lascia pure un commento! Mi piace confrontarmi con altre menti al lavoro cannabico 😁💯😶‍🌫️😈🙌🕷️
Likes
2
Share
@Bluemels
Follow
Tag 44: getoppt an 4 Zweigen. Tag 47: Ich gebe Alg a mic zur Hitzestress Behandlung ins gießwasser, die Pflanze ist an machen Stellen schon recht hell geworden, aber draußen wird es auch bald Kühler.
Likes
72
Share
@BodyByVio
Follow
After 14 days drying, 7 days hanging and another 7 days on cardboard boxes 📦 at a temp between 61 and 65 degrees F and a humidity between 52-55 % I trimmed all the buds and jar them with Boveda 62. After 2 days in jars ( 16 days from cutting the plant down) I weighed in everything. I got 434g of grade A buds and 685g of Grade B ( perfectly smokable ) buds plus a lot of trim that I didn’t weight. I’m very pleased with everything and I enjoyed every single step along the way. Probably next time I will lollipop/defoliate more aggressively so I can get more top bud and less grade b bud.