Likes
Comments
Share
@Fleetwood
Follow
Trying to keep away as I fear my meddling caused my hermie's. I found a light out, luckily I have 2. Looking for an upgrade now. Will use the remaining light as a backup. End of week, I have 3 x "600w" LED lights. Total draw is about 360w. 2 white (with added red) and one blurple in between them. I need to fix hanger system to keep them close, but not too close to affect cooling.
Processing
Likes
4
Share
Inicio da 5° semana cheiro a ficar forte e adocicado, ticomas a começar a aparecer exelentes ganhos de resina começa a ficar frosty, foi uma boa semana no geral fortes e saudaveis... Nunca o cheguei a dizer mas sou iniciante no cultivo nunca tinha treinado uma planta e é a primeira vez com substrato de coco.. acho que ate nem esta mau para a preimeira vez deixem a vossa opiniao.. e obrigado por verem
Likes
10
Share
@Todzilla
Follow
The 4 gelatos are just about week 3-4 of flowering. Looks like they will all mature within 10 days of each other. This gives me some time during harvest - as doing all 4 big plants at once is a lot. So far no nutrient burn at all as I punch it at 600ppm koolbloom and 450 ppm Jacks RO with RO water at 5.8ph. 1050 ppm. So far this mix has been very ph stable. I used power SI in my coco. I like silica in my substrate in lieu of in my reservoir. Hence no more ph drift. Very impressed. They’re drinking a solid 2 gallons a day. That’s a lot of RO water (8 gallons a day). It looks like the stretch is slowing, the branches are hardening in anticipation of the weight of the buds. I’ve defoliated almost every day. Next I have to move the plants and net them to prevent the moths / caterpillar during the fattening stage. My biggest problem has been the plants toppling over from the wind. One has hit the deck 10 times. But they just keep chugging along. Best of luck on your grow.
Processing
Likes
6
Share
@Moss420
Follow
Got a new light this week, it's basically a HLG 260 R-Spec except locally manufactured using the same Samsung LEDs. Big Mumma got her 60x60cm tent today and will go in there under one Viparspectra 300W blurple (130w from the wall). I trimmed her, super cropped her main stem and added a scrog net in preparation of flowering her in the next couple of days. Because my other plants were getting up past 75cm after 7 days of flower (100cm is my absolute max) , I decided to supercrop the canopy back down to about 60-65cm - it was pretty scary and I definitely broke the outer stem on some of them. Also gave them a good trim. Fortunately most bounced back strong the next day which are the most up-to-date photos you see (17/4/20).
Likes
2
Share
Likes
26
Share
@DreamIT
Follow
Sponsored by: 🏡GANJA FARMER SEEDS🏡-💡VIPARSPECTRA💡-💐GREEN BUZZ LIQUIDS💐-🛠️WEDRYER🛠️ 29/9 it was a tough month for me but I'm back in charge. We are almost at the end of the cycle and the flowers begin to be large and the pistils begin to color. __________________________________________ Personal advertising (contains affiliate links) __________________________________________ 🦄 Huge collection of exquisite genetics since 2009! Anonymous shipping! ✅https: //bit.ly/Ganjafarmer __________________________________________ Did you know that Green Buzz Liquids fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄 🤯 And with the code "dreami t" you will immediately receive a 15% discount on your purchases ✅https: //bit.ly/GreenBuzzLiquidsPro __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon USA: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE ✅Viparspectra USA: bit.ly/ViparspectraUS ______________________________________________ 🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links) ✅https: //bit.ly/Wedryer_ ______________________________________________ 📷🥇Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ Backup https://www.instagram.com/dreamit4200/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and good growth 💚🦄🤟
Likes
4
Share
@Luke_Lee
Follow
-06.04.2025 Today is the day. After a thorough examination of the trichomes, I decided to harvest the two Blueberry Automatics. After a total of eleven weeks. The wet weight of the flowers of Blueberry#1 = 77 grams, Blueberry#2 = 74 grams. The flowers are now hung out to dry and will be weighed again in 7days. -11.04.2025 After 6 days the Blueberry Automatics are dry. The branches broke directly when bent with a nice cracking sound. The dry weight of both plants together is 34g. The flowers were stored in jars for curing with a humidity packet from IntegraTM and a hydrometer. Total Time: 1879,36h Total Energy: 326,30kWh 1kWh: 0,30€ Energy Cost total: 97,89€ 💚
Likes
10
Share
@Lushgaia
Follow
Didn’t expect to see amber already at week 6 but hey all good
Likes
4
Share
questa pinapple di è allungata quest'ultima settimana 💪
Processing
Likes
14
Share
Second week of flowering She’️s the strongest (and the first ever) of my plants!
Likes
148
Share
@BioBuds
Follow
A week with lots of activity from my side, from the Gorilla's side, not so much. She stays behind and I can't find any other reason than genetics/seed quality. She is in exactly the same conditions as the other girls. I'm letting her do her thing. She will give some weed, well see how much. Maybe she is a late-bloomer. She does look lush and healthy so we do not understand but are learning. I put in the scrog net since her roommates need it and lowered the lights and started giving more flowering feed. The light is still awesome, the amount it puts out. This SP- 3000 rocks and, wallet permitting, we will go for a second one. @MarsHydroLED might be so happy with the amount of coverage we give them, they'll send us another one 😏 If you haven't seen it yet and you are in the market for new gear, check out the Black Friday super sale on www.mars-hydro.com!! We are gonna see what happens coming weeks with this strain. So far I am a bit disappointed and didn't expect this from this strain. We will never know if it was the age of the seeds or something else. What I do know is, it was the last time I use a third party seedbank, it is apparently too hard to keep fresh stock with too many strains. Until breeders put a production date o the packaging. Isn't it time someone said that? Cause lets keep it real, we are talking seeds that in any other case would have a cost of production of fractions of cents per seed. We pay what? 3 to 5 to maybe even 20 dollars a seed for an exceptional strain? Is it then too much too ask to put a friggin expiry date on the package? Or store them cooled? The breeder that does that and arranges a deal with third-parties that overstock can be sent back, packaging recycled, in exchange for fresh stock. Like any other fresh trade. For an industry making what, a billion worldwide, it is remarkable how many are still in the stoner with a garage / 80's trailer park, backwater funfair warranty, kinda customer service. Me: i grow organic weed for 30 years, these seeds were old Seed dealer: Yes but you failed to do a raindance on the rising moon, no refund. Me: but its for cannabis? Weed industry: Yes why we charged you double! Me: wow no germination after paying 20 bucks for seeds? Industry: They are all stoners, they won't notice.... Me: but this bong is made from toxic plastics? Headshop: yeas but it has this crumbling image of a leaf, 20 dollar! Can they get their shit together? For god's sake, I've seen crack dealers with better PR and customer care. Someone do sumtin, take us out of the car boot era please?
Processing
Likes
6
Share
@KcKush
Follow
*Week 3 forgot to add Humic Acid to PH Perfect nutrients. *increased nutrients by 1ml of each making it 2ml per gallon of micro,grow, and bloom. PPM seemed the same. *20-20-20 PPM from 300 to 350. *Lowered lights to 20 inches “Forgot to lower them” *increased light intensity by 5%-10% untill I reached 100%. *soil PH seems steady 6.5-6.8 *Cant really tell the difference between both nutrients both look identical. Can you? *watered about 32oz for each plant did not dry out previous week. So I did not water in betweeem feeding.
Likes
13
Share
ça murit tranquillement par ici ! Les 2 Mazar sont magnifiques, elle arrivent au bout ! La récolte est dans les jours à venir, en fonction de l'évolution des trichomes. Je surveille chaque jour au microscope. Actuellement il y a environs 5% d'ambrés ? J'attends +/- 20%, pour avoir davantage de stone et de relaxant. L'Afghani va suivre avec 1 semaines de plus. Il reste encore quelques semaines à la Libainaise et la Sinaï, qui sont très belles aussi ! 😍
Likes
1
Share
They're coming along nicely, but we have 2 runts that aren't doing much, might replace them with something else. Quick video of how the girls are getting on. Video 2 is 2 days later
Likes
2
Share
Ill update this more as I continue to cut down, dry, trim, and finally squish!
Likes
Comments
Share
moved to ground with unlimited room for roots
Likes
12
Share
@Haoss
Follow
I have to dry the buds in the dark at 20 degrees in 50% humidity 😍