Likes
Comments
Share
Welcome to my second grow of the Glueberry OG strain. This girl was veg'd for 14 week in a small pot while my first grow of this strain is in the flowering room. She didn't gain much more in size, despite the extra veg time, probably due to lower levels of nutes and the smaller pot size. Still she's looking good after moving her to the big pot and giving her a trim. Thanks for checking out my grows!
Likes
9
Share
@Rizik86
Follow
Day 1 - TC600 is 36 inches from seedling. Veg 100% Flower 100% 17 hours on 7 off. PAR/PPFD 170 DLI 10.05 Day 2 - Mylar Emergency Blanket DIYed into 2 by 3 foot tent. PAR/PPFD 240 (41% increase) DLI 14.5 (44% increase) Nutrients: Advanced Nutrients 2 mL of each Micro Grow Bloom Base Nutrients and 2 mL BotaniCare CalMag. 3 Gallon bucket filled with 2 gallons of RO water. No more notes for rest of the week. The TC600 is 260w from the wall. Not 600w.
Likes
25
Share
End of the fourth week of flowering. The stretch being finished and the buds starting to grow, I added a little PK 13/14 to the soup Shark. They are the most advancing in flowering. The buds start to form well, the plant although rather small develop buds that promise to be very interresting.
Likes
4
Share
Seeds started to pop about 4-5 days after germination I got 100% germ on this run
Likes
115
Share
Harvesting the Bounty of Cherry Cola Auto Dear fellow cultivators, we've reached the triumphant culmination of Cherry Cola's journey as we delve into Week 13 – Harvest Time! Join me in celebrating the fruition of our labor and the bountiful rewards awaiting us as we harvest the radiant buds of Cherry Cola Auto. As the sun sets on Week 13, the air is filled with anticipation and excitement. Harvest season has dawned upon us, marking the culmination of Cherry Cola's remarkable journey from seed to harvest-ready beauty. In the heart of the garden, Cherry Cola stands tall, her branches heavy with the weight of abundant buds. Each bud is a testament to her resilience, her vigor, and the care and dedication invested in her growth. With meticulous care and precision, the time has come to harvest Cherry Cola's radiant buds. Each cut is made with reverence, ensuring that only the finest, most pristine flowers make their way into our stash. As the buds are trimmed and cured, an aromatic symphony is unleashed, filling the air with the tantalizing scent of Cherry Cola's terpene-rich profile. It's a sensory experience like no other, a celebration of nature's bounty. As we gather the fruits of our labor, let us take a moment to reflect on the journey that has brought us here. It's been a labor of love, a testament to patience, perseverance, and the boundless wonders of nature. In conclusion, let us raise a toast to Cherry Cola Auto – a true champion of the garden, a symbol of resilience, and a source of boundless joy. May her harvest be plentiful, her flavors unforgettable, and her legacy enduring. Until next time, happy harvesting, fellow enthusiasts! #CherryColaHarvest #BountifulBuds #GrowersPride Nutrition: @aptusholland @aptus_world @aptus_ Love, Care, and Attention: @dogdoctorofficial As always, thank you all for joining me on this journey, for your love, and for it all. My horticultural odyssey would never be the same without you. Your love and support are cherished, and I feel both honored and blessed to have you in my life Friendly reminder all you see here is pure research and for educational purposes only Growers Love To you All 💚 💚 💚
Likes
10
Share
Flowering day 15 since time change to 12 / 12 h Hey guys :-) This week the ladies developed beautifully 👍. The stretch has started very strongly :-) . Watering was done twice this week with 1.2 l (see table above for nutrients). The heating mat does exactly what it is supposed to do, you can see that the ladies are doing perfectly again 😃. Fresh osmosis water was mixed with tap water in a 100 liter tank so that I would have enough stale water for the coming week 👍. Otherwise everything was cleaned and checked. During the check, I noticed that after spraying neem oil 3 times, there were still a few damn trips to see. I have ordered nematodes for leaf and substrate against tripse. Then they should finally be gone again 🙏🏻 have fun and stay healthy 💚 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.exoticseed.eu/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Likes
13
Share
Likes
15
Share
@AK1210
Follow
This week has been a good one all round. The sun has been beaming down all day for days and I still due to continue for a while. The gorilla 🦍 has now started to get to a nice bushy size, unfortunately outgrowing the original tent position. After the mistake I made with the Rhino Ryder I grew by taking the bold move to leave permanently in the elements, the cold temps at night really slowed bud production. I have had to improvise and make a shoddy attempt at lifting the tent to allow the room needed.
Likes
26
Share
@Nistnov
Follow
I left the honey cream outside in a dark place, which turned out to be a big mistake. None of the branches that I trimmed and dried directly had bud rot but around 6 buds that were left outside had bud rot. The mass of this plant really put me to the test took a whole lot of time to trim every branch. In fact I still have a bunch of branches that I'm too lazy to trim right now so I'll do a dry trim someday. Although this grow had some problems it was an absolute pleasure to watch these plants grow and to now having this harvest is absolutely beautiful, a perfect strain mix. I won't ever let them grow this big again since I really don't need that much weed and I think I'll going to have more fun with some extreme LST or something like it and I guess I'll look for strains that will flower earlier and not for ones that flower fast.
Likes
16
Share
Beginn woche 3. Sind tag 22 in blüte. Seit tag 14-15 ca. Riecht sie von tag zu tag besser und stärker. Freu mich schon tierisch auf den lemon weihrauch geschmack. Das uplifting soll ja auch nicht zu verachten sein. Ich lass mich mal überraschen wie sie sich noch weiter entwickelt. Obwohl ich sie nach 7 tagen schon in die blüte geschickt habe und die erste woche auf MH blieb. Zeigt sie trotzdem was sie so kann. Beim nächstenmal wird sie bis zum limit gebracht. Der cut ist wie immer von ROOTS_FARMS. Der beste stecklingsshop österreichs. Vllt sogar europa.
Likes
18
Share
@Kmikaz420
Follow
La plante est actuellement millieux de la 10 semaine et j pense pas me tromper en disant que il lui faudra au moins 2 semaine encore ^^ autrement c est une plante assez simple à faire pousser (comme toute leur gorrila) que j adore soit dit en passant ^^ Voilà les amis cette aprem je poste la veg et pour le reste vous devrais attendre un peut .
Likes
19
Share
Day 28 from sprout, these girls are looking healthy and loving life...as far as I can tell. Topped them back on Monday 1-22 and then did my first top dressing today with some gaia green all purpose 4-4-4. some glacial rock dust and alittle mineralized phosphorus. Been staying at 6.5ph for all waterings
Processing
Likes
15
Share
@MG2009
Follow
08/09/2020/ start of week 3 flowering, I think I'm seeing P deficiency? Watered her with LAB to see if it helps going to put a couple spikes of 4-9-3 around the outer rim, and water in with more LAB to get the microbial army mobilized.🙏
Likes
5
Share
@skaf420
Follow
small side project: Rebegging some branches to preserve this pheno for the future. Hopefully they will root soon.
Likes
28
Share
@cyberkyd
Follow
Dear Me, I had a Growers Nightmare, An Equipment failure around 21th of Jan,24. My 3X3 Mars Hydro Kit is IMPORTED from United States. it comes with a pretty powerful grow light FC-E3000. But Unfortunately it broke only after 1 weeks of usage. The Rotating knob stopped responding to dimming function. The push button only turns lights OFF/ON. And without having the ability to control the Light intensity I was left with nothing but 100% light, 400+ PPFD and 25+ degree Temp in my Grow Tent. Hence I Disconnected the Two of the Centre Light bars and Increased the Height to maximum at about 1.3 Feet from plants. This at times was showing between 230-300 PPFD but it now it's back at showing 400 here and there. At the very least the tent temperature is 23-24. I Contacted Mars Hydro notified that I'm in different Country and that I'm helpless and I can't basically send you the Unit for a replacement since I'd killing my plants at that point so please either 1) sell me a new controller stand alone unit to my country. I'll pay upfront. or 2) send me new unit and I'll send back as soon as fresh unit arrives and I swap the malfunction unit. I'll bear shipping cost upfront for both ways. But it's been like 3-4 days no conclusion we're still figuring out and yet to get to any conclusion. Hence I ended up placing order for a AC infinity 6 inch exhaust fan which comes with AC infinity 69 Pro controller( a separate unit that can connect to Mars hydro Grow Lights using RJ45 Cable Type B Connecter). It's cool how just one thing can add a whole Semi-Automation to Grow Tent Environment. Not gonna lie I did thought at this point that I had in fact made my tent buying decision in a jiffy without looking at all the other options. I hope Mars Hydro Fixes it provided that I had invested my faith in them with my money at around 1200 usd( Tent cost about 600 USD + about 600 in Shipping and import fee). Prepared Cal-Mag Buffered Coco-Perlite Mix for Coming week. Plants are already on a Light Feed Schedule with a 3 Part series by General Hydroponics. 1st Week Nutrients Diet Per Gal Water 2ml CalMag 1 ml micro 1 ml Grow 0.5 ml Bloom Ph-6.1 TDS - 277 UPDATE : 4 February : - I learned First week starts "After" the Cotyledons when first true leaves show up. Which means I've been actually in my first week only. Putting an end to my anxiety over my current plant sizes. Also, Mars Hydro replied with a humble gesture and decided to replace the dimmer at no Additional cost, They told me I could keep the faulty unit which means I don't need to spend money on returning it. and they're directly shipping to my country without any extra fee (a cherry on top). I'm yet to get the tracking but it should arrive at the very least sometime before I hit the Flowering. My first week plants look somewhat healthy despite a little light stress in the early stage. Although the Plants heights not been upto the desirable min. so far which is mostly because light was throwing too much ppfd in the early stages. Stay Tuned as i complete the week 2 on 10th of feb for these Baby Auto's.
Processing
Likes
15
Share
The girls are starting to fill out pretty nice. We are at 14 days since switching the lights to 12/12. The grandaddy black seems to be one of the slower ones to transition to flower but she is showing preflowers and starting to stretch. Gave them the weekly flush and fresh nutrients. This will be the last week of maxigro. I will cut it out and start liquid Koolbloom next week.
Likes
10
Share
Still cooking strong. Did a heavy defoliation after these pics. But really just letting em be crazy ha. This strain is super hearty, excited to see what the next few weeks bring. Really starting to show signs of flower no been on 12/12 for about 10 days. Thanks for stopping by and as always 🍻
Likes
136
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 1/22/22 6th week of veg!!! 💚💡🌱 Lots of growth in the last 2-3days, color looks great a couple twisted leaves on #4 but nothing major..we've removed a large fan for better light penetration on #1 & #2..temps have been awesome since the weather changed, plants are loving the intense light and mild climate. We have no real game plan for flower (besides not getting overgrown lol) but size will definitely determine when we flip.. I would assume 2 more weeks at this rate of growth but time will tell.. everyone is eating a little with every watering now (water only every 3rd/4th) and things look great! (for now lol)..Thanks as always for dropping by and happy harvests everyone!! 🌱😽💨 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 1/24/22 We've been running the MarsHydro at 29" this entire grow (found my tape measure lol) and the node spacing is still really tight, I assume there's a lot more red in SP-3000 than lights we've used in the past, at 29" these little plants have side stems as fat as pencils..We plan to keep the light at this distance all thru veg and we'll begin lowering it at the start of flower...plants are coming along nicely, much more growth in the last few days than the previous week. I'm REALLY excited for this grow..I think the SP-3000 will deliver us a half lb or more of Bruce Banger with very little effort..I couldn't be more in love with this setup.... .....until i buy my 2nd SP-3000 that is 😸 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_