Likes
Comments
Share
Got some sealant to properly seal my DIY CO2 generator and lil maggie seems to like it. Her buds are starting to swell up. For the CO2 generator I did the following: 2 Liter Bottle -> 1 Liter Bottle -> Fan (Fermenting) -> (Water Filter) -> (Distribute) Ingredients: Sugar - 3/4 Cup Yeast - 1 Teaspoon Water - 6 Cups Step 1: Add 6 cups of room temperature water to the 2 liter bottle. Step 2: Add 3/4 cup of sugar to the water and mix until sugar is fully dissolved. Step 3: Add 1 teaspoon of yeast and let sit until bubbles appear in water filter bottle. 
Step 4: Direct the end hose to the plant canopy. CO2 is heavy so it falls, use fan to blow it to the plant canopy.
Processing
Likes
4
Share
Day 14 of flower and all 4 plants have stretched over a foot in the last week. Should start putting all of their energy into flowering now. Looking really good so far. Really, really good.
Processing
Likes
17
Share
Hello growers I’m back with sweet seeds genetics I must say a massive shout out to @sweetseeds for sending me these seeds it’s very much appreciated iv never tried sweet seeds before and the fact they send me seeds to try for free with free p&p is banging 2 big thumbs up from me👍🏻👍🏻 Now it’s day 7 and the girls are looking good just keeping them moist with tap water I will continue to do so for the next week after that I’ll hit em with some juice until next week be safe and happy growing ✌️
Likes
7
Share
Likes
31
Share
Finally moved her to the new set up which is a 7 gallon square bucket with compartment lid which make verifying pH or topping up reservoir much easier. From here on she should explode with proper nutrients and care. GHL
Likes
Comments
Share
@Dirizhor
Follow
Week 13. Looks good, smells good, doesn't strech, just getting fatter, ... the fatter the better) Trichoms on some leaves are getting ember already. That's a surprize, as I initially expected it to flower 9-10 weeks, and so far she is through 5 weeks of floweri ng. Anyways, not foing to rush so far, I believe there's more potential in it. Waterring /feeding is the same, 1 liter every 2 days with 5ml of plagron flowering smthn) Thank you for checking!
Processing
Likes
10
Share
@GrowerGaz
Follow
This week just water from the autopots and a soil soak with some bio enhancer . Plants are really starting to smell now . Resin production on the Rado z is insane. Sadly they did not make the cut for the next drop. Happy to have been able to test them. I think they look and smell great.
Likes
29
Share
@DreamIT
Follow
Sponsored by: ORIGINAL SENSIBLE SEEDS-💡VIPARSPECTRA💡-💐GREEN BUZZ LIQUIDS💐-🛠️WEDRYER🛠️ 8/7 After several days of Growdiaries making it difficult for me to write and respond to comments, I found that I can still update the journals. I apologize to everyone for the non-replies but I have replaced the main email and the email to confirm the account never arrives, and Growdiaries' customer service seems to be non-existent. 10/7 everything is going well, nothing special to add🤘🦄 12/7 It is pretty big compared to all the others born in the same period, I am very satisfied up to now __________________________________________ Personal advertising (contains affiliate links) __________________________________________ 🦄Highest quality seeds since 1992, a real guarantee! (no affiliate link) ✅https://bit.ly/Originalsensibleseeds __________________________________________ Did you know that Green Buzz Liquids fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄 🤯 And with the code "dreami t" you will immediately receive a 15% discount on your purchases ✅https: //bit.ly/GreenBuzzLiquidsPro __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon USA: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE ✅Viparspectra USA: bit.ly/ViparspectraUS ______________________________________________ 🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links) ✅https: //bit.ly/Wedryer_ ______________________________________________ 📷🥇Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ Backup https://www.instagram.com/dreamit4200/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and good growth 💚🦄🤟
Likes
34
Share
@Hexus
Follow
Day 85 - We're into a new week! She's still got a way to go yet, but she's putting on mass like no other plant I've grown. Her colas, as you can see in one of the pics from last week, are bigger than gallon jugs. The whole plant is top heavy and I have to be extra careful when pulling her lid to the side to feed her. Her mass is getting wider as well, from the sheer weight of her colas. She's drinking about a gallon a day and showing no signs of letting up. Day 91 - End of week 13! - She's not done yet, but getting there. Upkeep is pretty much just dumping a gallon of new feed into her every two days or so. I'm pretty excited to see what her yield is at this point, because lifting her out to refill her actually take a bit of muscling.
Likes
Comments
Share
@Budtoker
Follow
Bud's don't seem too big yet. Took a while to show pistils once I'd switched to 12/12 so hope they're just a little slow. Plant growing in soil is smallest but has fattest Buds.
Likes
11
Share
This week smells so strong. The tent was cramped
Likes
55
Share
@Max1973
Follow
omg, another week has passed...... :) Day 100 - and then there was 11 Buds ....... lol Switched over to normal water on both ... smaller has been on water 1+ weeks ..... Endoscope arrives this week i hope..... harvested afew buds to fit it all in the tent and setup lights properly... trimmed em, wired em abit to support the weight of the buds.... I'll see how the endoscope results show, as to harvest...... i think growth slowed abit over last week or 2, because of poor light setup, not enough room in tent, and other grow 6400k led.... got a new tent on the way... 😎 Day 101 - Pics - edoscope, usb arrived... it's very good, but hard to stabalize / focus, i'll have to work out how to use it better...... the pics i posted were of a younger bud from the bottom..... i'm happy with the cloudy with amber, and harvesting.... 😎 Day 103 - vid of all trimmed and drying out upside down in tent. Day 105 - pics vids of drying and into curing.... i'll list all the test buds and buds i trimmed in the final harvest report.....😎
Likes
32
Share
Things have been moving right along today is the last day I’ll give nutritions then will be flushing the rest of the week hoping to harvest next weekend! Smell is mild but dank for sure!! Sweet and rich, kinda get a hint of some coffee smell lol any ways, sticky to the touch and boy do my fingers smell dank haha 🤤
Likes
Comments
Share
@Hiraeth
Follow
To finish the cycle, I left the plants in complete darkness for the last 3 days, combined with low temperatures to enhance color, resin production, and terpene expression. This final stress pushed maturity and brought out beautiful tones — especially noticeable in the pink pheno and frostier colas. Plants were then harvested on April 11, 2024, after 66 days of flowering.
Likes
15
Share
@Uwish
Follow
Hello guys, Here I am again to present you a new run, still with the best leds of the market nevertheless as I changed my growing space from 120x120 to 150x150. So I had to update the material inside... I will run with 3 EVO 5-150 lamps of 320W or 960W with Bluetooth dimmers. For the Hydro system, it will be the V-SYSTEM from Alienhydroponics. In fertilizers I am always with Advanced Nutrients. I work with osmosis water. Currently, 4 clones took on 4. Once the roots are ready, I will transfer the cuttings from the propagator to the V-SYSTEM. ------------------------ since the 16/08, when I transplanted the plants in the RDWC system, I noticed some points that I will mention below and correct next time. 1. The cuttings are too small, allow enough time so that I can completely fill my pots with clay balls. 2. Cut out the bottom of the pots from the cuttings. 3. 3/4 of the cuttings are touching the water, so one is late. Next time when transplanting, add more water, up to the basket in order to immerse all the plants and not to create a difference between each one, consequence now I have 3 that are ready to explode and one that will struggle behind, problem corrected today by increasing the volume of water. 4. The b-52 is a real pain in the ass in RDWC, you have to clean the 2 filters almost every day, with this new soup I'm testing without and I think I'll continue like this just with the base sensi grow A and B, as I use Root rot X, I won't use voodoo juice since all the bacteria would be killed. 5. Use of Voodoo Juice is useless if using Root Rot X which will kill the bacteria. I don't know why but when I transplanted in the RDWC, I put my set up in growth mode, except that the plants were not ready for it, moreover, I made a FIM on each. So I lost some days, these last days I went back to a ppdf of 150, now that my roots touch the water, I declare growth 0 on 22/08, I will do between 21 and 28 days of growth. And as my roots are doing well and touching the water I'll go to a PPFD of 300 ++
Likes
22
Share
1/11/2024 Vegetation Week 1 Day 1- I have a root almost in the water.. Yay!! Top feeding is almost done. she is looking a little sad as I work the transition Top feeding but once the roots are fully in the water she will start to take off. Ensured my PPFD is set between 250-300 it is set to: 258 1/12/2024 Vegetation Week 1 Day 2- I have a root in the water.... NO TOP FEED TODAY SIR!!! now that a root is touching the water and she looks stable, I am not going to topfeed, I will see how she looks tomorrow and as long as everything looks good I am going to go ahead and do a change and week 1 fill on Nutes.. I know it is a couple of days in but the same Nutes go through Week 2 and get changed at Week 3 So I should be good to go.. I will just ensure I fill to root touching the water when I change tomorrow. 1/13/2024 Vegetation Week 1 Day 3- Water Change Day!! I added 36 Gallons of Water to the system: Silica= .5mil/gal= 18mil CalMag= .75mil/gal = 27mil FloraMicro=3.0mil/gal = 108mil FloraGro=2.0mil/gal = 72mil FloraBloom= 2.0mil/gal = 72mil PH DOWN= 30mil Very important thing with this system is to now wait the 24 hours for the system to adjust.. Do not make any further adjustments to your PH up or Down for 24 hours to allow time for the system to balance. 1/14/2024 Vegetation Week 1 Day 4- Today I just adjusted the PH to ensure that it was right at 6.0 1/15/2024 Vegetation Week 1 Day 5- Today I Cleaned up the lower damaged leaves from the transition from top feeding to roots in the water. She looks good today. 1/16/2024 Vegetation Week 1 Day 6- Today I just took a picture of the beautiful lady for Log. Other than that just normal day to day operations, check the pH, check the Humidifiers and fill as necessary, check level of water in the Res. Everything looks great. onto Tomorrow!! 1/17/2024 Vegetation Week 1 Day 7- Today I filled the humidifers, checked the PH and just let her grow.. Grow baby Grow.....