Processing
Likes
Comments
Share
Bueno ya tenemos limpita la raices de esta farm cheese y pronto tocará matarile , unas semanas más que aguante y pronto se podrá consumir. Vaya ejemplar en serio muy recomendado todo lo que gira entorno a la genética cheese, y es que los olores son increíbles , y laplanta es brutal solo hay que ver que planta y que flores que saco ... Ph regulado 6,5 quitamos productos ,procuramos no aumentar la humedad más de 45% , temperatura media de 26 grados . Pronto nos vemos buenos humos fumetillas
Likes
12
Share
Looking good no issues to report. Watching flowers develop rapidly CO2? The light? The tent? Not sure what but loving the set ups effect on my babies added my red growstar light to head into week 5 Smells and swells time. Also the sprayed branch has male flowers in currently waiting to extract pollen
Likes
5
Share
I haven't defoliated much at all through this entire grow, so I decided to do a thorough defoliation and cleaned out the entire lower canopy. I also removed the sucker branches and adjusted the nutrients for early bloom. I'm using Recharge and florakleen to flush between nutrient changes.
Likes
29
Share
Week 7: Preparing for Flowering At the beginning of the week, we installed the net, marking the final stretch before flipping to flower. The plant is growing beautifully, and I’m genuinely impressed by its vitality. All the training seems to have had no negative impact—she’s handling everything like a champ! 💪🌿 By the end of the week, it’s finally time to switch to flower—wish me luck! 🍀 Challenges this week: Temperature: ~26°C Humidity: ~35% VPD: A whopping 2.4! Not exactly ideal, but thanks to the large fabric pot, she had enough water to keep going strong while I was on vacation. 🌱💦 We’re still seeing light-colored tips, and she’s putting on a final growth spurt before I flip the switch! 🌸🚀
Processing
Likes
5
Share
@Ensign420
Follow
Week 02 Introduction This week has been a bit of a struggle. Had my first experience dealing with slime and brown algae. But I think adding enzymes and increasing the beneficial bacteria helped to fix the issue. Also experienced nutrient burn for the first time. My nutrient solution strength got as high as 671 PPMs. So backed it down to about 430 PPMs during the end-of-week reservoir change. Also cut Hydroguard (expired?), CaliMagic, and Superthrive from this grow. Now she's still stunted, but is starting to recover. Hopefully... [START OF WEEK 02] Day 01 - Monday - 08/10/20 - Total Days: 008 ----------------------------------- - [0830]: Still looks a bit yellow. But getting larger! --- Solution strength was at 248 PPMs. --- Just topped off with a bit of distilled water --- PH went up to 6.1 so PH'd down to 5.8 --- Ran the top feed for a bit to wet the hydroton. - [2130]: She's looking even more yellow now. --- Even the new leaves are really yellow. --- Decided to add more base nutes. --- Added 4ml of Sensi A --- Added 4ml of Sensi B --- Now at about --- Solution Strength went up to 304 PPM. --- PH was at 6, --- Also raised the water level a bit more. --- I really hope it's a nutrient deficiency and not an over-watering issue. --- Please live! Day 02 - Tuesday - 08/11/20 - Total Days: 009 ----------------------------------- - [0830]: Looking less droopy. But still yellow. --- Decided to do a reservoir change. --- 4.5gal of distilled water --- 8ml of Sensi Grow A --- 8ml of Sensi Grow B --- 8ml of Voodoo Juice --- 4ml of B-52 --- 4ml of CaliMagic --- 4ml of Hydroguard --- 4 drops of Superthrive --- PH'd down to 5.8 --- Solution strength: 302 PPM --- Since I didn't want to risk over-watering the rockwool, I did not to do a top feed, may do one tonight after the sleep cycle (lights are still set to go off at 10am and back on at 4pm). --- As I was doing a reservoir change, I noticed that the tubes and bucket were a bit slimy. Didn't really stink or anything. Is this normal? Maybe due to the Hydroguard and Voodoo Juice? --- I hope she gets better soon! - [2215]: Getting larger! But still yellow. --- Also can see a root growing through the net pot! Tiny little thing but it's there! Will have to start dropping water once more appear. --- After looking over a few DWC diaries using AN nutes, seems like my solution strength is still too low. Most around this stage average around 500 PPMs with about 4ml per gallon. --- Top fed for a minute to wet the top of the hydroton. --- Solution strength went down to 263 PPM. --- Added 8ml more of Sensi A --- Added 8ml more of Sensi B --- Now base nutes are at 16ml for 4.5 gal of water. --- PPMs went up to 411. --- Still lower than 500 PPMs, but that's okay. --- PH was at 6. Not sure if I should adjust PH using AN nutes. So going to not ajdust unless PH goes above 6.1. Day 03 - Wednesday - 08/12/20 - Total Days: 010 ----------------------------------- - [0830]: Looks like more root growth! --- She still looks yellow. But leaves are perky. --- PH was at 6.2 so lowered down to 5.8. --- Solution strength was at 394 PPMs --- Since roots are still growing, I decide to lower the water level a bit. Now water level is a bit below the net pot. - [2200]: Root is getting longer! --- Slime is returning. Not sure why. --- Solution strength: 357 PPMs --- PH: 6.1 --- Decided to add an enzyme along with more beneficial bacteria to hopefully cure the slime. --- Added 16ml of Sensizym --- Added 5ml of Hydroguard --- Added 8ml of Voodoo Juice --- New solution strength: 430 PPMs --- New PH: 6.1 --- Top fed for a minute. --- This slimy residue is really freaking me out! I hope the added enzymes will help eliminate the slime. --- Going to do a full reservoir sterilization/nutrient change over the weekend. Please survive until then girl! Day 04 - Thursday - 08/13/20 - Total Days: 011 ----------------------------------- - [0930]: I think the enzymes worked! There is little to no slime now! --- Although I think the root was also dissolved in the process. It's now just a little stub sticking just below the net pot. The enzyme is also suppose to dissolved dead roots too but guess that root was too weak? Not sure what happened there. But I think the slime is cured! --- Solution strength went down to 395 PPMs. Decided to add more base nutrients. --- Added 8ml of Sensi A --- Added 8ml of Sensi B --- Added 4ml of B-52 --- Solution strength went up to 598 PPMs. --- PH was at 6.1 --- As long as the PH is between 5.5 and 6.3, I'm not going to use PH Up or Down. But still will monitor PH levels. - [1715]: Checked up on her after her nap and shes looking alive but stunted. But no slime! --- Decided to add some sugars to help maintain the enzymes and beneficial bacteria. --- Solution strength was at 587 PPMs. --- PH was at 6.2 --- Added 8ml of Bud Candy --- Solution strength went up to 671 PPMs. --- PH also went up to 6.3 --- Lowered water level a bit to hopefully promote more root growth. --- Top fed for a minute. --- She is getting bigger, but still looks yellow. Day 05 - Friday - 08/14/20 - Total Days: 012 ----------------------------------- - [0915]: Leaves look a little burnt on the tips. Still no slime. --- Going to back off on the PPMs to hopefully fix the nutrient toxicity. --- Solution strength was at 632 PPMs --- PH was at 6.3 --- Added/Removed water until PPMs were at 536. --- PH was still at 6.3 --- Raised water up a bit, then top fed for a minute. - [2200]: Looking better. Still yellow though. --- Solution strength: 514 PPMs --- PH: 6.5 --- Added PH down. --- New solution strength: 518 PPMs --- New PH: 5.2 --- PH was kind of high. So decided to PH down. Had to use quite a bit to bring it down. But eventually got it to drop down to 5.3. A little low, but so far, the PH has always gone up so wanted to start it really low. --- Ran the top feed for a minute to re-saturate the top of the hydroton. Day 06 - Saturday - 08/15/20 - Total Days: 013 ----------------------------------- - [0830]: She looks stunted. leaves are still yellow. --- Solution strength: 514 PPMs --- PH: 5.6 --- Top fed for a minute. --- Not sure what to do at this point. Going to do another reservoir change soon. Hoping she lives until then. - [2145]: Looking pretty much the same. --- A bit of slime has returned. Since I've been diluting the nutrient solution, the enzyme ratio has dropped. So I guess this is expected. --- Also noticed that slime build up was on the air-stones. Never really checked the stones so not sure how long that has been there. Looks brown too, which can't be good. --- Going to do an H202 sterilization of the system (minus the net pot) tomorrow so did not add anything. --- Lowered the water level to below the net pot. --- Then top fed for a minute. Day 07 - Sunday - 08/16/20 - Total Days: 014 ----------------------------------- - [0900]: STERILIZATION DAY! --- Decided to skip today's night cycle for a deep clean. --- I'm hoping that skipping a night cycle won't be too stressful. --- Temporarily moved her to a new bucket. --- Used about a half of gallon of straight distilled water to flush out the net pot. --- Drained the system and wiped up all the brown sludge. Also removed the air stones and cleaned up all the goo. --- Filled the system with 2 gallons of distilled water and at least 30ml of food grade hydrogen peroxide (35% strength). --- Yea its a lot, but since I'm not going to sterilize the system overnight, I went with a really high doseage. Basically I kept adding until I started to see little bubbles start to form. --- Then I ran the water pump. - [0915]: Boiled the air stones in tap water for about 10 min. Then reconnected them to the airlines. --- I let the air stones and hose soak in the sterilization solution for about 5 minutes so the peroxide can absorb into the stones. Then ran the air stone to help mix and agitate the solution. --- Occasionally, I'd repeat the process of turning the air pump off for a few minutes to let the stones soak. - [1000]: Covered the top two row of holes of the net pot with some aluminum tape. Hopefully this solves the light leaking in through the hydroton. - [1200]: Used an old toothbrush and scrubbed the pump clean. Then drained the system. --- Refilled with more distilled water and peroxide. Again added a lot. --- Ran system again to sterilize even more. - [1530]: Drained the system and refilled with distilled water to rinse. --- Ran the system for a few minutes, then drained and rinsed again. --- Did this a few more times over about an hour. - [1630]: Added 4 gallons of fresh distilled water. --- Added 15ml Sensi Grow A --- Added 15ml Sensi Grow B --- Added 12ml of B-52 --- Added 16ml of Voodoo Juice --- Added 16ml Sensizym --- Solution strength was at 430 PPMs --- PH was at 5.6 --- I was going to add Hydroguard, but I think the bottle is expired. Since 2017 or 2018!? I think Hydroguard is good for up to 2 years from the date on the bottle or 6 months after opening. So not going to use from now on. I wonder if this could have contributed to the slime build up. --- Also removed the CaliMagic and Superthrive too. Going to only use AN products to eliminate the chance of incompatible nutrients. --- Placed her back in the bucket and top fed for a minute. --- Here's hoping for the best. Going to let it ride until morning! Please feel better! [END OF WEEK 02]
Likes
2
Share
@Dmntverde
Follow
Las he regado con enraizante organic root stimulator de B.A.C
Likes
30
Share
Great week for the Peyote Cookies, faded out beautifully. She stacked up size right until the end. Smells super dank, and her buds are rock hard. Loads of purple in this pheno. Very high calyx to leaf ratio which is what I like to see. Definitely bringing her back into the garden again. Her flush was done for about 20 Days. She’s now down drying.
Likes
180
Share
DAY 70 Watered with molasses 💧 I had to adjust some of the stems, I used one bamboo stick and glued sticky tape to it. So now the other Sticky tape is going to stick. 😜 DAY 72 Watered with Biobizz feeding. 💧 0,5ml Grow + 2ml Bloom + Enzym+ Raised the EC of the water a little bit by adding 1ml/L calmag instead of 0,5ml/L.. DAY 74 Watered with Biobizz nutes. 💧 1ml Grow + 4ml Bloom + HS300Bio + AminopowerPLus DAY 76 Watered with Biobizz nutes. 💧 1ml Grow + 4ml Bloom I love my little Caramelo girl! 😍 😍 😍 😍 😍 😍 😍 😍 😍 LED running at 100%. Have a great week!! 😘 __________________________________________________ SET UP 240W Fullspectrum LED 660nm 730nm 3500K dimmable custom exhaust fan 270/320 m³/h 3x Garden High Pro fans 5W tap water EC 0,25 - adding Calmag to EC 0,4-0,6 - adding pH minus Bloom (AHH) to pH 6,5 Plantaflor organic tomato soil 🍅
Likes
3
Share
Likes
43
Share
[DAY 78] - 12/12/2022 - TS1000 40 cm distance - 100% dimmer: 144 watt; - Light cycle 20/4; - Height: 74 cm from clay (the other one is 83 cm from clay); - 24° C - 60% RH during light - 19° C - 70% RH during night; - EC 1.7- PH 5.9. [DAY 79] - 13/12/2022 - 24° C - 60% RH during light - 19° C - 70% RH during night; - EC 1.5- PH 5.9. [DAY 80] - 14/12/2022 - 24° C - 65% RH during light - 19° C - 80% RH during night; - EC 1.4 - PH 6. [DAY 81] - 15/12/2022 - 22.5° C - 73% RH during light - 19° C - 80% RH during night; - EC 1.4 - PH 6.1; - Defoliation. [DAY 82] - 16/12/2022 - 22.5° C - 70% RH during light - 20° C - 80% RH during night; - EC 1.4 - PH 5.9; - Pretty fine, some spots here and there on the leaves. [DAY 83] - 17/12/2022 - 22.5° C - 70% RH during light - 20° C - 80% RH during night; - FLUSH EC 0.3 for 24 h. [DAY 84] - 18/12/2022 - 22.5° C - 70% RH during light - 20° C - 80% RH during night; - EC 1 - PH 6.
Likes
12
Share
@Roberts
Follow
Ze Chem Bang is vegging right along. I hope this update works. She had a solution change a few days ago. I previously have removed the lower leaves as they were struggling with signs from my inability to care for them proper after hand surgery. I am back now and she is back on track. Thank you Terpyz Mutant Genetics, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.
Likes
33
Share
Welcome to Royal Queen Seeds Cup 🏆 Hey guys :-) This week the lady was repotted into 8 l . Unfortunately I forgot that we should pot them in the 11 l pots from RQS 😂 . I will repot again as soon as it is rooted :-) . After repotting, it was poured with 1 l without nutrients because it still has fresh organic soil. Apart from that, everything was cleaned in a controlled manner and osmosis water was treated. Stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://www.royalqueenseeds.com/47-growing 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.royalqueenseeds.com/feminized-cannabis-seeds/576-watermelon.html Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Likes
28
Share
Flowering day 3 since time change to 12 / 12 h Hey guys . My cutting heating broke 3-4 weeks ago, which was fixed immediately and everything went wonderfully. Now, 3 days ago, the central heating broke down in the entire room, so that at night I only have temperatures of around 13 degrees :-( . One or the other lady is slowly starting to see a phosphorus blockage, as this can no longer be absorbed at temperatures below 15 degrees, like many other nutrients :-( . A friend looked at the heating yesterday and came to the conclusion that a real company had to do it, which is by no means possible for a stranger to enter my room. I quickly ordered heating mats for all the boxes so that the ladies could at least get warm feet. That's all I have this winter full can do . Let's hope everything will be fine 🙏🏻. As soon as the heating mats are attached in the coming days, I will post them in the pictures. Now for the update. Despite the severe cold, the ladies are still doing well and have made good progres . The ladies only had to be watered once this week, each time with 1 l, because it absorbs the water very slowly because of the cold and I don't want to overwater it. I took every single plant in the pot to take a close look at their roots. These are snow white and look very healthy 🙏🏻. It was also the last time neem oil sprayed so that the last trips are finally gone. Otherwise everything was checked and a lot of planning was done, like I do with the heating mats. Since a friend had the same problem in one winter and the heating mats got 10 degrees plus on the pots, I am very confident that it will at least bring something for the last cold month 😃 🙏🏻. I've started flowering even if some are still a bit small, but otherwise they'll get too wide from training and end up taking up space :-) until then have fun and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany
Likes
18
Share
09/24: Some training and defoliation today. They are all growing very differently. I heard somewhere that there is only a 1 and 4 chance of these being the level of purple that you see in the pictures on the website. Im really hoping that one of these are and that the fact that all 4 of these are so different is some small indicator of my chance being high. They are growing pretty well. They have access to all of the nutrients and water that they want. My favorite plant is PL2. She has been easy to train and i am loving her compact and consistent growth patters. Im really hoping she turns out to be a purple one. Each of the other 3 have been a challenge to train simply for my own error and them not being very resistant of it. I know, I know, I sound like a rookie blaming the pants for my poor training. But i definitely appreciate the plants that seem to respond to my aggression well. Speaking of my errors, the plant that I broke a large branch from has recovered. Well.. kinda. It healed up but not cleaning, and so i am not sure how well it will support itself during flower. But o am not going to mess with it and will see what happens with it.
Likes
69
Share
Woche 12 | Laughing Buddha | Der Umzug ins Hobbit-Megaprojekt Diese Woche stand ein Meilenstein an. Die Autos sind geerntet und gecurt, die Gorilla 720W hängt endlich an ihrem Platz und die Laughing Buddha durfte in ihr neues Zuhause umziehen. Und was soll ich sagen? Sie scheint den Umzug nicht nur gut verkraftet zu haben… …sie scheint darauf gewartet zu haben. 😅 Das neue Zuhause In den letzten Tagen wurde der große Growbereich aufgebaut. * 120 × 120 cm SCROG-Fläche * Zwei Netze (später zur Blüte sogar drei) * Gorilla 720W LED Gen II * Controller mit Sensorik * Klimaanlage * Luftbefeuchter * Mehrere Umluftventilatoren Auf den ersten Blick wirkt das Setup fast absurd groß für eine einzelne Pflanze. Als die Buddha frisch eingezogen war, wirkte das Netz riesig und die Pflanze fast verloren. Keine 24 Stunden später sah die Sache schon ganz anders aus. Test der “Billig-Lampe” Bevor die Laughing Buddha endgültig ihren Platz bekam, wurde noch eine günstige LED getestet. Das Ergebnis war überraschend positiv. Für eine preiswerte Lampe lieferte sie deutlich mehr Licht als erwartet und könnte für Anzucht, Stecklinge oder kleine Projekte durchaus interessant sein. Trotzdem wurde schnell klar: Für dieses Projekt spielt die Gorilla in einer ganz anderen Liga. Der Unterschied in der Lichtverteilung ist enorm. Erste Messungen mit der Gorilla 720W Natürlich musste die neue Lampe ausführlich getestet werden. Aktuell läuft die Gorilla auf: * 50 % Leistung * 50 cm Abstand Gemessen wurden dabei rund: 374 PPFD Das klingt zunächst wenig für eine 720W-Lampe. Man darf aber nicht vergessen: Die Fläche ist riesig und die Pflanze befindet sich noch mitten in der Vegetationsphase. Der Vorteil liegt aktuell nicht in maximaler Intensität, sondern in der unglaublich gleichmäßigen Ausleuchtung. Die Buddha bekommt jetzt Licht auf die komplette Krone statt nur auf die obersten Spitzen. Klima läuft erstaunlich stabil Die ersten 24 Stunden nach dem Umzug wurden genau beobachtet. Temperatur: * Nacht: etwa 21–22 °C * Tag: etwa 23–24 °C Luftfeuchtigkeit: * meist zwischen 60–65 % VPD: * überwiegend zwischen 0,8 und 1,2 kPa Genau der Bereich, den ich aktuell sehen möchte. Besonders interessant: Die stärksten Wachstumsschübe fielen genau in die Zeit, in der Temperatur, Luftfeuchtigkeit und VPD optimal zusammenarbeiteten. Die Buddha scheint sich unter diesen Bedingungen ausgesprochen wohlzufühlen. Die Reaktion der Pflanze Und jetzt wird es verrückt. Die Triebspitzen lagen nach dem Umzug vollständig unter dem Netz. Nur etwa 24 Stunden später drückten sie bereits wieder nach oben. Das Wachstum ist aktuell beeindruckend. Die Krone wird breiter, dichter und gleichmäßiger. Der Stamm hat mittlerweile eher die Dimension eines kleinen Baumes als die einer Zimmerpflanze. Besonders erfreulich: Die Mitte arbeitet genauso aktiv mit wie die äußeren Bereiche. Genau das möchte man bei einem großen SCROG sehen. Der Plan bis zum Urlaub In zehn Tagen geht es für zehn Tage in den Urlaub. Ursprünglich stand die Frage im Raum, ob die Buddha vorher noch in die Blüte geschickt werden soll. Nach reiflicher Überlegung fiel die Entscheidung dagegen. Der neue Plan: * Weiter wachsen lassen * Netz 1 füllen * Etwa 10 cm Höhe gewinnen lassen * Die Spitzen ins nächste Netz wachsen lassen * Bis zum Urlaub weiter verteilen Während des Urlaubs wird lediglich gegossen. Nach der Rückkehr folgt: * Große Bestandsaufnahme * Triebe neu verteilen * Alles auf eine Höhe bringen * Unterhalb der Netze gründlich aufräumen * Kurze Erholungsphase Erst danach erfolgt der Wechsel auf 12/12. Kontrolle statt Rekorde Ursprünglich stand die Idee im Raum, etwa 72 Tops unter den 720 Watt zu platzieren. Das bleibt weiterhin ein spannendes Ziel. Allerdings wird die Kontrolle über das Blätterdach wichtiger genommen als eine möglichst hohe Anzahl an Trieben. Lieber 50 bis 60 perfekt positionierte Speere als ein völlig überfülltes Netz. Alles, was später nicht sauber ins Konzept passt, wird konsequent entfernt. Am Ende zählt nicht die Anzahl der Triebe, sondern die Qualität des Canopys. Fazit der Woche Diese Woche hat gezeigt, welches Potenzial in dieser Pflanze steckt. Der Umzug verlief problemlos. Die Gorilla liefert exakt das, was ich mir erhofft hatte. Das Klima arbeitet stabil. Und die Laughing Buddha scheint gerade erst richtig in Fahrt zu kommen. Noch steht sie mitten in der Vegetationsphase. Noch laufen lediglich 50 % Lampenleistung. Noch ist nicht einmal das erste Netz vollständig gefüllt. Aber zum ersten Mal habe ich das Gefühl, dass dieses Projekt etwas ganz Besonderes werden könnte. Die nächsten Wochen werden zeigen, wie weit die Buddha dieses Netz tatsächlich erobern möchte. Eines steht fest: Langweilig wird es definitiv nicht. 😎
Likes
15
Share
@AustinRon
Follow
LJ4Q23 Bolt III SOP LJ4Q23 - 8-Plant SOG from Cuts Objective: - 8 Plants - Single Colas - No Branches - Harvest Lemon Jeffery (Narrow Leaf Phenos): 70±5 days - Light Intensity - Ramp up from 200 - > 40 DLI, at 13 hour ScotoPeriod, will need MAX Light to Achieve - Ramp Light Intensity to MAX ASAP (3 Weeks?) Notes: - Lemon Jeffery handles HIGH LIGHT Well, even within 6” of Light @ ~1800 µMol/m2/ - The challenge will be achieving minimum 40 Mol/day, which in this setup requires 1000 µMol/m2/s @ 13 hour Scotoperiod ______________________________________ Start of Week: [ 2023-12-13, LJ4Q 15:B:2:1] End of Week: [ 2023-12-19, LJ4Q 21:B:2:7] Environment Targets (Bolt III): - Scotoperiod: [ 13, h] # Contiguous dark hours daily - DayPeriod: [ 1900, 0600 +24h] - TemperatureMax: [ 78, °F] #CHANGE from [82, °F] - RH: [ 68, %] - VPD: [ 1.0, mS] - LightIntensity: [ 850, 1000, µMol/m2/s] - LightDistance: [ 16.5, “] Bolt III Fertigation - RLA HYDRO Chart, Week 4, EC: [ 1.8, mS] - Primer A: [ 8.5, ml, gal] - Primer B: [ 8.5, ml, gal] - Silica Skin: [ 4.25, ml, gal] All Fertigation Add - Plant Success: - Microbelife Photosynthesis Plus: [ 0.5, ml/gal] - Build-a-Soil: - Quillaja20 Powder: [ 0.5, tsp/gal] - South Cascade Organics: - SLF-100: [ 5, ml, gal] __ Wed Dec 13, 2023 LJ4Q 15:B:2:1 LightIntensity: [ 932, µMol/m2/s] DLI: [ 35.1, 11, mol/m2/day] # On our way to 40 DLI Popped above 12” Plant Height (13 - 14”) 24# Photone Filter, Add 10%: 848 x 1.1 : 932 - [x] Measure Runoff - [x] Amt: 600 - Reduced Irrigation Event from 2:30 to 2:15 - Measure Thursday, Adjust. Foliar: - [ ] CalMag Fuel: [ 20, ml/gal] - [ ] Peak Bloom: [ 5, ml/gal] __ Thu Dec 14, 2023 LJ4Q 16:B:2:2 - [x] Reset Intensity - LightIntensity: [ 838, µMol/m2/s] # Calculated, 24# Filter, +10%, 762 Measured, 30.1 DLI - [x] Change Light Distance: [ 19.5, in] - [x] DLI: [ 33, mol/m2] - [x] Measure Runoff - [x] Amt: [ 400, ml] - 8 X 4400 X 10% (Field Capacity): 3520 Max, 350 - 450 is the target runoff per day - 15 sec: 200, ml. 200/15 ml/sec / 8 plants: 1.6 ml/sec. Close to our 1.7 ml/sec per plant Consider that - So we want field capacity per day, until we’re showing drought stress. - 4400 ml X 10%: 440 ml/plant/day - 110 ml/plant/event - 4 events/day - But that would only be 64 seconds, not current 135. - Let’s reduce again to 2 Minutes total, and evaluate. GUESS: If Linear, we should have 200 ml runoff __ Fri Dec 15, 2023 LJ4Q 17:B:2:3 Res: [ 4, gal] Environment Actuals - Scotoperiod: [ 13, h] # Contiguous dark hours daily - DayPeriod: [ 1900, 0600 +24h] - TemperatureMax: [ 78, °F] - RH: [ 67, %] - VPD: [ 0.86, mS] - LightIntensity: [ 838, 1000, µMol/m2/s] - LightDistance: [ 19.5, in] - [x] Refresh Reservoir - [x] 4 Gal - [x] Change Irrigation Duration Before 1845 - [x] IrrigationDuration: [ 2, min] - [x] Measure Runoff @1930 - [x] Amt: 180, ml. # after 2 fertigations 🤨 - Raised Fertigation per event to 2:15 fm 2:00 Guesstimate: 120 sec * 1.7 ml/sec: 204 ml I think we’re closer to 0.8 ml/sec: ~ 100 ml per delivery (2min) Refresh - 4 Gallons - Primer A: [ 36, ml] - Primer B: [ 36, ml] - Silica Skin: [ 18, ml] - King Crab: [ 2, ml] - Terps Plus: [ 2, ml] - Quillaja 20: [ 2, tsp] - SLF-100: [ 20, ml] - EC: 1.8 Res Temp: [ 60, F] Irrigation Timing Update Initiate Irrigation Irrigation Complete Event 0 18:45:00 18:47:00 Event 1 21:30:00 21:32:00 Event 2 00:15:00 00:17:00 Event 3 03:00:00 03:02:00 - Foliar: - [ ] Solar Rain: [ 20, ml/gal] - [ ] Peak Bloom: [ 5, ml/gal] __ Sat Dec 16, 2023 LJ4Q 18:B:2:4 - [x] Measure Runoff - [x] Amt: [ 250, ml] We really need the additional 15 seconds, reset today: Initiate Irrigation Irrigation Complete Event 0 18:45:00 18:47:15 Event 1 21:30:00 21:32:15 Event 2 00:15:00 00:17:15 Event 3 03:00:00 03:02:15 __ Sun Dec 17, 2023 LJ4Q 19:B:2:5 - [x] Measure Runoff - [x] Amt: [ 230, ml] #1930 - LightIntensity: [ 1047, µMol/m2/s] # 110% of Photone 952 - DLI: 61.7 __ Mon Dec 18, 2023 LJ4Q 20:B:2:6 - [x] Measure Runoff - [x] Amt: [ 80, ml] - On the theory that the main feed line siphons back to res, despite back flow adaptor - Add 45 Seconds to FIRST Feed of Day to Assure Priming and delivery of feed water. - Add 15 Seconds to remaining 3 __ Tue Dec 19, 2023 LJ4Q 21:B:2:7 - [ ] Measure Runoff - [ ] Amt: Added :45 to initial fertigation, :15 to remaining. Initiate Irrigation Irrigation Complete Event 0 18:45:00 18:48:00 Event 1 21:30:00 21:32:30 Event 2 00:15:00 00:17:30 Event 3 03:00:00 03:02:30