1st WddngCake is under a SpiderFarmer SF 1000D 100W but an older model. The 2nd WddngCake is under a MarsHydro FC-E1500 LED 150W. They also receive on the sides UV (total per day 2 and 1/2 h ) exposure and IR (total per day 2h) From a Secret Jardin Cosmorrow UV 40W and one Secret Jardin Cosmorrow IR 40 W. UV 1h in the morning starting with main light, 1h in the afternoon and 1/2 h just before the main light goes off. IR 1/2 h in the morning before any lights even start then letting it another 1/2 h with all the other lights.Total 1h IR 1/2 in the evening right before all the lights go out and let it smooth out 1/2 alone without the other lights. Total 1h 1/13/25 The girls are starting the week ok. 1/14/25 1st WddngCake, She is older, is happier after the flush, still has a little bit of alkaline soil but i don't want to stress her out to much. Gave her a little BioBizz CalMag aprox 3,5 ml ; TopMax 5ml and 5 ml BioBlom . All mixed in 3,3 l PHed Water at PH 5.0 ppm 290. Runoff PH 6,8 :( ppm 1100. Also took like a handful of inter buds leafs :D . I think she will be ok. Seeing signs of buds fattening, new pistils. Frosty :D 2nd WddngCake Is very strong starting to fatten up the buds because she is younger and just now entering that stage. Like I already said her smell still resembles a tropical sweet creamy hoppy IPA. I think she is good, no major problems. Gave her 3,3 l of PHed water. Also mixed in CalMag 2,6 ml; 4 ml TopMax and 5 ml BioBloom. PH 5,4 ppm 207. Runoff PH 6,08 and ppm 302. I think is a good sign that i flushed a lot of nutrients from the soil and she also used a lot of them. Should keep and eye on that. Took 5 inter buds leafs off. 1/15/25 They are doing ok, both are fattening their buds and coming around good. The 2nd WddngCake better then the 1st one because I didn't make so many mistakes with her 😬 The tent is smelling great the Temp is at 23 C at night 20 C and RH at 50% (+- 3%) . 1st WddngCake stand at 47 cm and the 2nd WddngCake at 74 cm at their highest. New Photos! 😍😃 1/17/25 Back with some updates. The girls are doing wonderful. Shades of pinkish darkish greenish on both. The 1st Wddng Cake Auto, is older and showing this colors also on the very small sugar leafs. Gave her 4,2 l of PHed water, going in PH 5,6 and ppm 95. The Runoff is at PH 6,4 ppm 205 and I feel like now she is a little bit happier. Soil PH at 7,3 but not measuring precisely have a cheap tho rod measure stabby thing. The 2nd Wddng Cake Auto is younger, starting to forming her full flowers, bursting with mass . She also displays the colors mentioned above on the leafs closer to the main buds and also here and there on other sugar leafs. Gave her 4,2 l PHed water , going in PH 5,4 ppm 110. Runoff at PH 6,5 ppm 195 . Her soil PH is also at PH 7,3 kinda of. :)) I can see she is happier. I think is because i didn't make mistakes at the start. I also had 2 other Autos that aren't on here. But none of them grew like this one. Until now :)). Also took from both some leafs here and there. I think like a hand full total. Half a handful a plant. :D In the new photos you can see the "between the fingers roll" 😁 like i call it. That I only do twice in the life of an Auto, not to stress her to much.😨 Temp in the tent at 24 C when day +-2 C. At night time 21 C +- 1 C . Rh 50% +- 3% all of the time. Ventilators on for wind, and the grow must go on 👽🙌 1/18/25 So just 1 day until end of the week. I just got a Microscope. Very good actually recommend Andonstar AD203 Portable, 4' Screen also metal holder. A microSD Card 32Gb is also included and the data cable. Has a battery. Handels good. for the money i am surprised 😍. 1st Wddng Cake Took some pictures of the thricomes and I see a lot of milky one, some clear ones too. No amber ones. I think the harvest window is open but , I don't have time to harvest now. I also prefer also to let it a few days. Also must see for an extra tent to do 2 "days" of darkness.😥 2nd Wddng Cake is doing good, starting to fade in nuances of pink dark green just on the leafs of the top. and just a little bit of yellow.😢 But tomorrow she will get another feed to push her further the 2 weeks or so she has got to go😍 Seems i forgot to set the clock of the Microscope:))), i just went to town because it was half battery full :)))). Also Pictures from under the Microscope 😍😁 1/19/25 Sooo end of week. I think we are fine. All the things that should be happening are happening :)). Sorry i messed up the timelines. But the older one smaller one will be 10 weeks old in 2 days. And the younger one is gonna be 9 weeks in 3 days. Or something like that. Chaotic start like i said :)). 1st Wedding Cake Auto is starting to open her harvest window. Very much thanks to all that answered my grow question. She got 4,9 l of water PH 5,4 ppm 92; Soil Ph aprox 7; Runoff PH 6,6 ppm 305. I will keep an eye on her because she will be done in like about a week or maybe 2. Must see how next week goes. Continue to give PH water no nutes 😁 She is aprox 10 weeks old. 2nd Wedding Cake Auto changed color more on the leafs. Purple dark green. Some little bit of yellow. But today i feed her. She got 4,2 l water with CalMAg 3,5 ; Activera 5 ml ; Algamic 5 ml; Bio Heaven 5 ml; BioBloom 5ml; TopMax 6ml. Going in PH 5,7 ppm 315; Soil aprox PH 7; Runoff PH 6,9😢 ppm 610. She is younger then her sister so i think 3 - 4 weeks. We will see. 😆 New pics 😁

Frosty af, smells like berries or something like that. I need to press rosin from this one.

Seems like they are doing fine now they have some sun. I used cow shit in my grow medium for fertilizer. And I'll be dosing with bat guano next week.

I must say, I really liked the output from my new light. I honestly think it really improved my grow. It actually reminds me of when I changed from growing under a CFL to LED. It really stepped up the quality of the cannabis I am harvesting. Now that I have cut the other two pla

Has a sweet taste to it. Again , I didn’t log any larf in the weight. Very resistant strain.

HI all thought i would show the last week of this run. at first, i thought this plant wouldn't be to great at flower. but the end results are looking up. the buds are so tight! the buds are not massive but very dense and the smell is really kicking in. currently starting to flush for one more week and i will harvest on week 13. i will update the weight once it dries.

5th week of flowering.

Ok, so what does CRI have to do with grow lighting? To consider this we need to first review what color rendering index or CRI is. Put simply it’s a performance metric or outcome that considers the ability of a light source to mimic sunlight, 100 cri is sunlight at midday, so approximately 5000 kelvins on a clear sunny day. So, if we know that perfect light that is 100cri is perfect for replicating true color for say photographic applications where subjects perfectly lit will reveal perfect color, then why as a metric is it important for use in grow lights? The fundamentals of light that mimics sunlight are referred to in the grow light community as wide or broad-spectrum light. That is to say, all the wavelengths of sunlight at 100 CRI would be perfectly represented and would therefore provide a light that is sunlight, artificially produced. Ok so is CRI the nirvana of plant performance? Not quite. Let’s consider missing ingredients. OK so measurement devices used for CRI are typically based around what is referred to as PAR. PAR stands for Photosynthetically Active Radiation. and it refers to the portion of the light spectrum (wavelengths) that plants use for photosynthesis. Specifically, it covers wavelengths between 400 and 700 nanometers (nm), which is the range most beneficial for plant growth. While PAR (Photosynthetically Active Radiation) focuses on the 400–700 nanometer (nm) range of the light spectrum, it does however not cover all wavelengths that might influence plant growth. Here’s what PAR leaves out when considering a full-spectrum light source for grow lighting: UV-A (315–400 nm), UV-B (280–315 nm), and UV-C (280 nm). Benefits to Plants: UV-A and UV-B can stimulate secondary metabolite production (e.g., flavonoids, anthocyanins, and terpenes), enhancing plant color, flavor, and pest resistance. Far-Red Light –Light in the 700–800 nm range. Benefits to Plants: Stimulates the shade-avoidance response, helping plants grow taller or stretch toward light. Enhances flowering and fruiting when combined with red light in the Emerson Effect (synergy between red and far-red light to increase photosynthetic efficiency). Limitations: Too much far-red can lead to elongated, weak plants with reduced yield. It’s a balancing act UV-B may act as a stressor to trigger protective responses in plants, leading to increased resilience. Limitations: Excess UV can damage plant tissues and reduce growth if not carefully managed. Infrared (IR) Radiation – Beyond 800 nm What It Is: Heat-emitting wavelengths beyond visible light. Benefits to Plants: Infrared contributes to overall warmth, which can aid plant development in cool environments. Limitations: Excessive infrared can overheat plants, leading to water stress or damage. Green Light – Often Underrepresented in PAR Measurements What It Is: 500–600 nm, technically part of PAR but often undervalued. Role in Full Spectrum: Penetrates deeper into the plant canopy than red or blue light. Vital for photosynthesis in lower leaves and shaded areas. Misconception: Traditional PAR models underestimate green light’s contribution to photosynthesis. Beyond PAR: Signals and Stress Responses Non-Photosynthetic Effects: Wavelengths outside PAR can affect: Circadian rhythms in plants. Photomorphogenesis (plant shape and structure development). Hormonal responses and stress adaptation. Importance in Full-Spectrum Grow Lighting: A full-spectrum light source includes UV, visible light (400–700 nm, encompassing PAR), and far-red/infrared light. This comprehensive coverage ensures: Enhanced photosynthesis (beyond traditional PAR efficiency). Improved plant quality (color, taste, aroma). Support for natural plant growth cycles and stress responses. To optimize plant health, growth, and productivity, it’s essential to balance PAR with these additional wavelengths based on the specific needs of your plants and growth stage. As indoor gardening gains momentum, the quest for lighting solutions that emulate natural sunlight intensifies. High Color Rendering Index (CRI) LEDs emerge as a forefront solution, boasting a CRI of 90 or above, making them capable of producing light remarkably similar to natural sunlight. Ultra-high CRI LEDs, with ratings of 95 to 98, push this similarity even further, offering an unparalleled approximation of sunlight’s full spectrum. Advantages and Challenges of High CRI LEDs Benefits of High CRI LEDs Natural Light Simulation: These LEDs excel in replicating the broad spectrum of sunlight, crucial for photosynthesis and overall plant health. Energy Efficiency: High CRI LEDs outperform traditional lighting in lumens per watt, offering substantial electricity savings. Durability: With a lifespan extending years beyond their fluorescent counterparts, these LEDs represent a long-term investment in indoor gardening. Considerations for High CRI LEDs Initial Cost: The upfront cost of Higher CRI LEDs can make you total system cost higher however the price gap is reducing Heat Generation: Although they produce less heat than traditional lights, managing heat emission is still necessary for sensitive plants. Light Spectrum: While they mimic sunlight, High CRI LEDs might not offer the exact wavelength needed for optimal plant growth, potentially necessitating supplemental lighting or nutrients. Efficacy of High CRI LEDs in Plant Growth The effectiveness of High CRI LEDs varies with plant species, growth stages, and required light intensity. Studies, such as those conducted by the University of Florida and the University of Arkansas, demonstrate that High CRI LEDs can surpass traditional lighting in growing lettuce, basil, and strawberries, improving both yield and quality. Natural Sunlight Versus High CRI LEDs Though High CRI LEDs adeptly imitate sunlight, they cannot entirely replicate its spectrum and intensity. Natural sunlight provides a more comprehensive range of wavelengths, contributing to vigorous plant growth. Nonetheless, High CRI LEDs offer a viable alternative when sunlight is unavailable, presenting a more consistent light source across seasons. Nutrient Dynamics Under High CRI Lighting The broad spectrum of High CRI LEDs influences plant nutrient requirements. For instance, a University of Helsinki study revealed tomato plants under High CRI lighting demanded more calcium, attributing to improved fruit quality. This indicates a shift in nutrient management strategies when transitioning from traditional to High CRI LED lighting. Top Ten Reasons for Opting for High CRI LED Lighting Enhanced Plant Growth: Closely mimics sunlight’s spectrum, vital for various growth stages. Improved Visual Inspection: Easier monitoring of plant health and early detection of issues. Increased Yield: Potential for higher production due to efficient photosynthesis. Better Pollination Management: More natural lighting conditions could improve pollinator efficiency. Superior Quality: Enhanced color, taste, and nutritional content of produce. Energy Efficiency: Significant savings on electricity costs. Extended Lifespan: Reduces the frequency of light replacement. Lower Heat Emission: Minimizes risk to heat-sensitive plants. Versatility: Suitable for a wide range of horticultural activities. Environmental Benefits: Lower carbon footprint and reduced electronic waste. In Summary, we can ask what HI CRI brings to the conversation. Many standard grow lights use lower base CRI for example 70, 80, and 90 cri. This is a common strategy to increase efficiency. The use of newer phosphors like KSF negates the differences of efficacy in higher CRI LED’s. It’s clear that ignoring CRI as part of your lighting recipe reduces your spectrum breadth irrespective of wavelengths outside the par range, meaning use of all wavelengths in a complete lighting system that includes broad spectrum white can’t help but improve your total plant performance.

5/13/22 - 5/20/22 5/14/22 Today my Poison Zkittlez got her Zamaldaberry room mate to move out so that she would have more space. She is trying to fill this 4x4. I did some defoliation and leaf tucking today to help open up those inner branches. 5/16/22 Today my girl got some defoliation and her resivore topped off at 3 gallons needed after 3 days. She is doing great and her flowers are getting beautiful 😍 5/20/22 Today marks the last day of week 3 of flower for my Poison Zkittlez. Topped off her resivore 3 gal. Did some minor defoliation of some inner leaves.

Day 14 After a week from the bottom feed The pots feels light again My finger was dry So i think its time for they first halve dose feed 23c, Ppm 700, ph 6,25 Gave each a dose of 100ml water Day 16 Last night I saw roots so today I transplanted Wich didn't really went as plant because something (Hopefully only soil) dropped right before I placed "Jane" into her new home :( Besides that it went okay Gave them a good dose of water Now wait till it dries and then they get their first full feed dose Day 20 This night they got they first full feed 500ml each 4ml grow A&B 4ml b52, bud candy and voodoo With a low ph to bring down the ph in soil Wich is a lil high I qeuss 22,7c 1000ppm 5,8 ph Day 21 Today we did some LST Now they lay, next up is sit and then we roll So far they are cooperating Day 22 All are now bend and secured and doing well :D Day 23 Soil was dry gave them some calmag 1ml/l each 700ml 6.10ph

Hey guys, it's been a great journey but I've finally hung my Stardawg out to dry! Yesterday was their last day totalling 8 weeks on flower. Realistically they could have benefited from a further week because the lower buds are somewhat underdeveloped but then I would risk losing the preferred sweet high smoke of the top buds. With this being my first attempt it's been a great learner not only for how to care for the plants but also the environment. As soon as these went into flower and started stretching I knew that putting 6 in a 2.4 x 1.2m tent was a bad idea. They just got so big which is the cause of the lower sites not being as good as the top colas. Despite that I'm really happy with the outcome and I'm hoping ive got 30oz+ of real good quality nugs. All of the top colas have turned a gorgeous violet colour too which you can see on the pictures and I absolutely love. For my next grow I've gone with 6 fastbuds strains which hopefully will go under a scrog. Check back next week for the harvest and weigh in!

What a fun run this was ! These Ogreberrys finished up from 81 days to 102 days with nice hints of gassy , sour purple , sweetness and glistening with frost! These ladies will cure up for a month an will be ready to test out ! So much fun , I highly recommend this strain if your looking for some oooy gooohy resiny grape smelling nugs !

Week 4 already!!! The plant is doing great this week, the weather continues to be great so hopefully it stays like this until the end of flowering! September 5: water September 6: nothing September 7: nothing September 8: water September 9: nothing September 10: some more spray with spider mite (only bigger leaves, of course not on the buds) September 11: nothing

Grow nutrients have been weaned sour entirely and on full strength bloom nutrients. The plant is a little dense on the left side, but responding well to the AGLEX light and Remo Nutrients. Buds are really packing on the weight, and building lots of trichomes, though mostly all clear heads at this point

I honestly can't wait for this one to be done so I can try it out. The terps on this on is crazy!! That dank sweet cherry smell. Buds are forming more and more. Top Dressed with 8 tbps of BuildaSoil build a flower and 6 tbsp of BuildaSoil Craft Blend

Primer día en la superficie y ya asoman las primeras pequeñas hojas buscando luz, siempre prefiero dárselas de forma paulatina y gradual para que no sea tan brusco. Buenos humos! 👽

Insane purples lots of color super fruit Berry smell on the iced wildberry super hard diesel smell with a hint of citrus on the nana glue love both phenos!

My Purple Kush is still the little guy of the group. It's so small, I don't think it's even started flowering yet, but that's alright! It'll have plenty of time to mature and do its thing. I'm guessing it'll probably be ready for harvest a couple of weeks after the others. I'm excited to see how this one turns out – Purple Kush is known for its beautiful colors and relaxing effects, so I've got high hopes! This past week has been a whirlwind of work, leaving little time for anything else. My phone's camera roll is sadly neglected, with only a few snapshots to show for it. But finally, I'm finding a moment to catch up on my grow diaries. It's been exciting to see the progress, even if it's just through photos. I'm looking forward to documenting the next stage!