📅 Week 10 | 🗓️ Day 64–70 Day 70 – Papayton 🏀 (2nd week flower) 🔸Papayton is growing vigorously in week 10 and is slightly ahead of Lemon Cherry Runtz in terms of size. The canopy is wider and the spearheads are slightly higher – exactly where the flower clusters are now really taking off. The pictures show densely packed calyxes with long, creamy white stigmas; the sugar leaves are already nicely pollinated and the buds are starting to stack up. So far, everything looks great. 🔸The SANlight remains at 90% and ~30 cm distance (approx. 900 PPFD at the canopy). The leaves appear relaxed, without claws or lightening – so no indication of light stress. I keep the climate rather moderate, with good air circulation through the foliage so that the fresh resin heads remain dry. It's a bit cold at the moment, so I can't quite reach the VPD, but I'm not going to put a heater in, hehe. 🔸I watered as planned with BIO PK from BioTabs – carefully following the manufacturer's instructions. Otherwise, only water. The goal: to push flower formation without compromising leaf health.Depending on how it develops, next time I will either just water it or give it a top dressing with Slizium Flash. 📈 Current Conditions 🌡️🔆 = 24°C 🌡️🌜 = 17°C 💨 Humidity = 69% 🔦 PPFD = 900 µmol (12/12) 🛠️ Setup (unchanged) 💡 2 x SANlight Evo 4-120 @90% ⛺ 120 x120 x 180 Spiderfarmer 🍯 Pots: 18 liter fabric pots 🌱 Soil: Bio-Bizz light mix 💊 Nutrients: BIO Tabs 🌱 “Easy, organic, only-water method. Save 15% with GDBT420. biotabs.nl/en/shop/”

They are getting big and starting to smell pretty much

Eternity Grow Cup - Week 9 Veg Update We are stepping into Week 9 of vegetation, and things are getting exciting! The plants are thriving—compact, bushy, and growing beautifully. This week, we introduced a SCROG (Screen of Green) net, an essential tool for maximizing yield and optimizing plant structure. Let’s dive deep into the why and how of scrogging: Why Install a SCROG Net Now? Maximizes Light Exposure: The net allows even light distribution across all branches, ensuring every bud site gets the optimal amount of light. Controls Plant Height: By guiding the branches through the net, we keep the canopy even and prevent excessive vertical growth. Enhances Airflow & Reduces Mold Risks: Spreading the plant out increases air circulation, reducing humidity pockets and minimizing risks of mold and pests. Increases Yield: More bud sites exposed to light mean higher-quality flowers and greater overall production. For now, we’re still not using the under-canopy lights, though they will come into play soon. The ICL 300 is positioned strategically, and we will likely move them around as needed later. For now, the focus is on structuring the plants and ensuring they fill out the available space properly. Optimizing Airflow - The Vortex Effect Air circulation is crucial for plant health, and this week, we’ve optimized airflow by positioning the fans to create a vortex effect: Fan Positioning: Each fan is placed at the tent corners, pointing in different directions, ensuring dynamic airflow instead of direct wind hitting the plants. Benefits of a Vortex System: Reduces hot spots and evenly distributes CO₂. Strengthens stems by creating a natural resistance. Prevents stagnant air, reducing mold and pest risks. The extraction system is powered by an AeroFan, connected to the AeroFan Smart Remote FRC1, currently running at 60% speed. This setup efficiently manages humidity and temperature while maintaining optimal air exchange. Current Environmental Conditions & Feeding For now, we’re maintaining the same water schedule and nutrient regimen. The environmental conditions remain stable: Temperature: Holding steady at ideal growth levels. Relative Humidity: Balanced to encourage healthy transpiration. PPFD (Photosynthetic Photon Flux Density): Kept at optimal levels to support vigorous vegetative growth. CO₂ Levels: Elevated but within safe limits, promoting faster growth. The plants are filling the space beautifully, but we know that the flip to flower is approaching soon! The next phase will depend on how fast they continue to spread, and adjustments will be made accordingly. Closing Thoughts & What’s Next? This week was all about structural optimization—ensuring proper airflow, training the plants with the SCROG net, and keeping everything in balance before the transition to flower. The upcoming weeks will be crucial, as we fine-tune the environment, possibly introduce the under-canopy lighting, and prepare for the flowering stage. A huge thank you to our sponsors Aptus Holland, TrolMaster, CannaKan, Grove Bags, Ziggi Papers, and of course, Zamnesia, Plagron, and Grow Diaries for making the Eternity Cup possible. And to our incredible community—followers, supporters, and even the critics—we appreciate every single one of you! Stay tuned for next week’s update, and don’t forget to follow along on YouTube and Instagram for exclusive content and behind-the-scenes looks! See you soon, and happy growing! Let’s keep pushing forward, and best of luck to all the competitors—we’re all growing something incredible together. Until next time! Genetics - Runtz https://www.zamnesia.com/6000-zamnesia-seeds-runtz-feminized.html Nutrients - Plagron https://plagron.com/en/hobby - Aptus Holland https://aptus-holland.com/ Controls - Trol Master https://www.trolmaster.eu/ LED - https://www.futureofgrow.com/en LED - https://www.thinkgrowled.com Soil - https://www.promixgardening.com/en Germination - Cannakan https://cannakan.com/?srsltid=AfmBOopXr-inLXajXu3QFgKXCXXos4F1oEvScjMKIB5MR5dk8-GJ-F49 DOGDOCTOR 15% off Smoking Papers - https://ziggioriginal.com/ Terpene saver - https://grovebags.com/ As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. The journey with nature is one of discovery, creativity, and respect. Let’s celebrate it responsibly and continue to learn and grow together! Growers Love To you All 💚 #EternityGrowCup #RuntzHunt #GrowersLove #CannabisCommunity #AptusHolland #ProMixSoil #TrolMaster #Zamnesia #Plagron #ZiggiPapers #Grovebags

This is a must grown strain if your looking for a full CBD Strain with less than 1% THC. I grew five different CBD strains this year and this is by far my favorite, the yields were amazing and the bud quality was some of the best I have ever grown. The taste and smell was also out of this world. I can't wait to grow it again

Ok

Day 15 - Transplanted WWxBB 1, and SB 1 & 2 to Roots Organics Original in 5 gallon pots. It went smooth and they all perked up pretty quickly. WWxBB2 could use some more time to develop its roots but no more than 2 days until she gets transplanted too. Day 17 - Transplanted WWBB2 this morning so now all 4 ladies are in 5 gallon pots. Watering .5 L every about every 3 days but will need to gradually increase the watering amount with the root development. Keeping an eye out for topping time! Day 19 - Starting to see some slight discolorations on a few leaves. Seems too early for the soil to be running out of nutrients and my pH has been consistent as far as I know. Thinking about trying a light does of some FF nutes if it persists. WWBB1 is almost ready for topping.

to be updated soon

Two of them id ok but i dont know what heppend to this one. I think it will be good , just need some time👍🏻 Am right?

Welcome Back!💚 Die Pink Sunset schlägt nun nach der ersten Blütewoche voll durch. Ihr Stretch ist relativ Stark und sie hat nun innerhalb einer Woche 18 cm zugelegt. Sie ist jetzt richtig schön ausgeglichen und die Interniodentriebe bilden sich richtig rasch aus. Ich vermute dass dieser Genotyp ziemlich stark in den Stretch gehen wird. We will see. Die Umgebungsgegebenheiten sind auch im Blütezelt optimal: ————— 🌞 Temp: 24,3°C 🌚 Temp: 19°C bis 2°C 💨 RH: 56% VPD: 0,97 kPa👍 😎 PPFD: 750 mqm ————— Grüne Grüße 🥦

New week in supported marshydro grow FLOWERING TIME last run i did it under a TS-1000 But this time it will be under the amazing FC-4800 i am so excited to boost up everything and see what i can approve from last run 🤘🏻🤘🏻 Starting to put them in 12/12 schedule they have bin put in darkness for 12 hours and now hopefully let the flowering Begin fucking love this stage 🤘🏻😎🤘🏻 27/10/21 All plants Transplanted in 11L fabric pots added 5gram Easy Roots - Mycorrhiza Mix to soil Have some ideas for my grow tent I have my plants on hard plastic pallet And i ordered plateau with ball bearing So i can turn my plants around with one spin 😎 basically a huge turntable wikiwki Will be updated soon happy growings Growmies visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Day 52 - before pic/vid pulled em both out scrubbed tanks..... moved em into a different tent, with a different light.... did up completely different solutions, and currently still building it all.... Day 53 - still buildin... vids of new home... Nutrifield, Rock Nitro, 1200-1500 ppm and 6.5 PH.... see if we can give em a good boost.... left em in pure water before puttin em in new solution.... Day 57 - pics vid.... been adjusting ph... down to 5.8.... they are just growin along nicely in the new home... got a fan for the tent... looks good tho... solution temp is abit high, fan will fix that..... changed just the tanks to 5lt Cereal containers, they are alot taller, more room below the container... fits perfect.... Day 59 - pics vids, , 6.2ph, 1300ppm ... water temps been getting abit high, fans should arrive next week.... 👍😎 120W Aluminum+PC Plug 2835SMD 7995-9594LM 1131Pcs Red+234Pcs Blue * Blue(wavelength: 430nm, 554nm * Red(wavelength: 630nm 660nm)

I’ve been experimenting with solar powered lights for an extended vegetative period…so far she looks extremely healthy…I Defoliated the lower branches and moulded her also.

Hi gromie's, well were at day 29 of flowering & day 64 in total. She has grown some really nice chunky dense buds & has a fairly strong sweet/ lemon/citrus smell to her. She is getting closer to harvest, starting to get cloudy trichomes & pistills starting to change colour, Calyx closed & swelling. Nice & sticky!

5/5/2024 Pistils pistils pistils 5/8 these plants are fucking exploding! Super exciting to see them like this. Pistils everywhere and they’re just STACKING! don’t even see budlets yet, just pistils. The structure of these plants is beautiful. They handle training fairly well. I topped one and super cropped it and did a bit of lst. I was feeling impatient so I decided to see what happened if I pushed the one a little harder and left the other to grow naturally.

ยืดๆ

Fotos del día 53, poco que decir, las altas temperaturas siguen y al menos mantengo la humedad por debajo de 60% y muy buena ventilación, parece que el engorde sigue. Solo queda seguir manteniendo los parámetros lo más controlados posible y seguir engordando los cogollos.

-

good flower

Hey now, hope everyone is having a great weekend and staying safe. Another great week for the ladies, as they are now about 3 weeks into flower, and the stretch has just finished. I am still feeding them silica, cal mag, and flower nutrients maxi bloom by GHE. I did start to add a PK booster this week pushing the EC up to 1.4. I also will be switched the light from V1 to the F1 Spectrum at the beginning of this week, and will be integrating the UV/IR bar into the light cycle later this week. I will run the UV/IR bar for approximately 30 minutes prior to lights off to get started. The tallest plants are the Sundae Driver and the Durban Nights at 42" and the Red Hot Cookies is the shortest plant at 38" however they all look happy and healthy and capable of easily giving up a half pound each. The 5X5 is really starting to fill up nicely, I am running two dehumidifiers outside of the tent and I am able to maintain around 50% RH in the tent during lights on, and around 55% RH with lights off. We did get an unexpected heat wave this weekend and it has been a struggle keeping the heat and humidity down but the flowers are just starting so no need to worry about mold or anything like that yet. As soon as this heat wave is over the temps should be good to go the rest of the way this is by far the best time of year to be flowering plants in my region. I did defoliate twice this week and I may do one or two more rounds before just letting them do their thing. Not much to do from here on out except make sure the reservoir is full and the PH is in the proper range. I hope everyone has a great weekend, Thanks for stopping by, Stay Safe and Blaze On!!! 💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled