Week 15 for Space Panda by atlas seed Both the phenos not doing too badly, been fighting these 2 plants to keep them flat 😂 I reckon another week or 2 of veg and they will be good to go into flower.

We're starting off this week with more thunderstorms. They will only be for the first two days of the week. This week is much cooler. The rain kept me from feeding my generative one formula nutrients with their water. On day 2 these are still feeding on the 800ml of coop poop 2-4-3 I top dressed with. They are nice and green and the centers are showing it was a little hot but it should grow out of that in a day or two. Day 5 of this week. Everything grew into the fertilizer. Buds are stacking and trichromes are beginning to show on the leaves. The smell is very noticeable now. The #1 plant has a smokey cheese smell. The #2 plant is skunky and sweet but more skunky. The #3 plant is a little behind the other two and isn't really putting off any distinct smell yet. Day 7 I'm starting to see trichromes

Hello growmies! Welcome to week seven of An Epsilon Adventure! Massive thanks to both Shogun and Royal Queen Seeds for sponsoring this grow! I have just completed the final defoliation for the three least advanced (and largest) girls. I have also rearranged the tent again to try to maximize the space available and light usage. I have not fertigated for 5 days after the last fertigation was a flush without coco base. I am struggling with humidity at the moment so I have been trying to let the plants go more dry than usual. Daily Updates ### Week 7 Day 2 02:30 7/8 Heavily defoliated plants 1, 5 & 6 and removed some of the lower branches. Rearranged tent then photographed & measured: Plant 1 is now almost unbelievably 2nd tallest at "only" 141cm in height! Her stretch has just about ended. Plant 2 has stopped stretching at 111cm and is 2nd most advanced into flower. Plant 3 has stopped stretching at 95cm and is most advanced into flower. Plant 4 has stopped stretching at 100cm and is 3rd most advanced into flower. Plant 5 has gained 6cm this week and may add few more but she is pretty close to done stretching at 119cm. Plant 6 has gained 22cm this week and isn't quite finished. She is now the tallest plant in the series at 142cm. ### Week 7 Day 2 07:00 7/8 Fertigated 1.6l each ### Week 7 Day 4 02:00 9/8 Fertigated 1.6l each reduced coco a/b to 2m/l each. Spent a bit more time photographing and videoing to try and capture the changes and the developmental differences. These 140cm+ plants are going to STACK. I am bracing myself for a lot of trimming and a monster harvest. 🙏 The current order of maturity and likely order of harvest is 3 2 4 1 5 6. I think the first and last plants will be at least a week apart in harvest, perhaps 2 or 3. ### Week 7 Day 6 23:00 11/8 Fertigated 1.6l each The smell in the tent is there now, really not that strong but there are 6 plants motoring through flower here now so it's not insignificant either. Plant 3 is absolutely stacking now, she's more or less run out of space around her cola and is now growing some foxtail like structures, exciting! Plant 6 the least mature is 2-3 weeks behind plant 3, but her stretch has finally stopped at 144cm. Took wide angle in tent photos today. All of the girls are drinking a lot now, but especially plant 1 who is really thirsty. --- Thanks for reading growmies! 👊 ========== Tent: 120cm x 120cm x 180cm Light: 600w HID Elite Dual Spectrum HPS + Angel Wing Reflector Air: 5" duct fan system with carbon filter ~300 m3/hour + RAM 9" floor fan + 4" intake fan Pots: Air Pruner Fabric Pots 30l - UGro XL Coco + horticultural grade perlite (~20%) Seeds supplied by Royal Queen Seeds https://www.royalqueenseeds.com Nutrients supplied by Shogun Fertilisers https://www.shogunfertilisers.com/en ==========

Combined the cop of water and paper towel method then planted the sprouts in root root cubes

The ladies has been having issues since day one, but im not giving up on these fighters! I have only been feeding ph 6.3 water, with no nutrition. Monitering moisture level in soil, and feeding before dry. -Temps - 26-27 day / 22-23 night -RH% - 65%(+-1.5) day / 70% night (+-1.5) -VPD 0.8 - 1.0 KPA 👉12/9 Climate on point, still recovering. 👉13/9 Letting them be. 🙏14/9 Praying every day. 👉15/9 The 3 bigger ones, is showing signs of adapting and overcoming the struggle. 👉16/9 The 3 smaller ones is still behind by a lot. 👉17/9 Topping two of the biggest and cloning the tops. *********First nutrients added to watering. (The 3 smallest got a bit of Biobizz root juice as top feed.) 👉18/9 In the mist of gathering data, to dial in vpd. I have only been feeding ph 6.3 water, with no nutrition. Monitering moisture level in soil, and feeding before dry. -Temps - 26-27 day / 22-23 night -RH% - 65%(+-1.5) day / 70% night (+-1.5)

My math on the nutes had been off, so should start resolving this week. For this change, I used 2gl of RO water per plant and introduced some cal/mag to level things off. This is also the first week of using big bud and bud candy. I'll only use the big bud for this week since it's supposed to be for the first 4 weeks of flower and this is week 4. Trimmed off a few bad leaves (after the pics) but not all so the pants wouldn't stress. The system has been adjusted to keep temps below 80 and humidity under 45%.

6/21 Wellllllllll she is still yellowing out like crazy. Very very very hungry girl. Moved the lights down to pull out some purp. I hardly have to defoliate at this point since she is consuming so many of her own leaves. I just carefully pull out the crispy leaves. 6/25 She is still yellowing out and is extremely hungry. Ive been feeding more than the recommended amount and shes still showing deficiencies. If you are growing in coco, i recommend you dont flush this girl. If youre running RO water, definitely dont flush this girl. Shes hungry till finish, no doubt. The trichomes are ridiculous on her. Ridiculous. Ive never seen more frost on a cannabis plant. Ever. She just keeps putting on more and more weight and frost. All of her leaves are sprayed in trichomes. The picture i just uploaded is from today. Although her trichomes are still mostly milky, i think she is nearing the end of her life. I will be uploading more pics tonight and a video to show all the foxtailing she is doing. All of her buds, even the ones down below, have the exact same pyramid-with-crown structure. Beautiful. A+++++ ____PS____ Here she is in all her glory folks. I took a bunch of photos and a video to show her sputnik-crown structure and stacked trichomes. You can see the green girls in preflower in the background for reference of color developement. She is going to be finished very very soon. Man, i cannot wait to harvest and cure this girl.

…

Day 50. Selective defoliation, constant spraying ( I said never in flower, but it goes well, so I will keep up for few more days ). All good, nothing special except missing space as always ;)))) Day 54. I repositioned them a bit, think too intense air was making both big Mimosas - a real sl@tty DIVAS ;)) Hope they will feel better aside. Happy Growing !!!

Jour 69: Installation de la Mars Hydro TSW2000 et rempotage de 6l a 11l

Gave just some water, no nutrients. Dimmed the light down to 65%, I think the green gelato got some light stress.

This one is definitely taking her time but its looking like the end product will be worth the wait, im getting an almost lemony aroma from the tent now. Edit: 5 days on I've just started the flush since trichs are turning cloudy.

Day 10: They have been growing nicely. Beautifull green leafs, no deficiencies or stress. I did some Defoliation and I'm planning to top some plants but not all of them since they make nice main colas as well. Also nice roots so far, will let those grow for another 1-3 days before repotting them into 7L pots. While doing that I will add some new clay for beneeth the pots to have a good run-off. I will add some mycorizza as well to improve the roots and I will water them again with lots of Regulator(anti-stress) and Rhyzotonic( root stimilator). Some days after that, they are ready to get pushed into flowering. Sativas like to grow twice and sometimes even more in size. So the size which they are at the end of this week will be enough. So at the end of this week you will see them being in 7L pots and in a bigger grow space under lots of lamps. There are like 3-5 plants not growing nicely. Might have to kill them. I'm not going to waste time,energy,nutrients on those if they don't grow in size in a couple of days. So might end up with just 235 plants. Il update again at the end of this week. Day 14: I almost finished the rest of the grow room. I still need to adjust and replace the lamps some more and other things. Did many defoliation below the plants. Thoose branches are never going to preduce nice and thick buds anyways. Such a waste of energy and nutrients. Because of the removing of branches and leafs, They get a better airflow and better exposure of light as well. So for now they look a little bit ugly haha and not so bushy anymore, but they will grow into fine looking ladies. I kept 5 or 7 branches each plant and some bigger plants I even topped because I don't want them to stretch alot. Another reason is that I want bigger stems. If other plants that didnt get topped, not improving stems I can still top them until the end of week 1 of flowering. I'm putting them into flowering, by putting the lightschedule to 12hours of light and darkness. It will take a few days before they start preflowering. The first buds will be seen in like 10-14 days. Untill next week!

New Week , New fun :-) So the second Rapier is in Week 7 now. She/He starts to build the Buds now. Drink a lot every Day. Love to get intense Light. Got little burn, because i forgot him one full day outside in the Sun-.- But he already recovered

Added the first screen into the tent. Decided to kick Big Mumma out because she just wasn't growing any taller and the other plants were really over growing her. For the new setup I used kitty litter trays and mesh to sit the plants on - each plant gets its own tray so I can track runoff EC individually and I cut little flaps in the mesh so I can wet vac the runoff. With this setup I shouldn't need to move the plants out of the tent until harvest. For the scrog I just tied some builders rope around the poles of the tent and tied the trellis netting off with training wire. I've been manipulating the growth just to try and fill out the whole screen, I also gave them a good haircut because I plan on flipping them soon, don't want them to outgrow the tent.

Start of week 3 blueberry is flowering and the stretch is almost over. The seedlings are growing nicely.the box got up to 100f this week during mini heat wave had to put ice blocks in rez to lower temp down from 80f. I look forward to the 3 other new strains I’m running. My GSC seedling is looking a little pale I should have waited longer to change rez over to bloom nutes. I have top dressed some organic fertilizer near drip line of nutes 4-6-4 one month release. I applied to all seedlings except blueberry. I reduced blumat on gsc, ww, and ch until surface dried a little bit as my gsc was showing signs of overwatering. Gsc is starting to green back up. My bb had to nanners i plucked them I hope these are all. It could be from the high temps or the one night I had a light leak. BB larger plant receving 1000 ppfd.i turn light back down a notch Gsc leaves started cupping now she’s getting just 550 along with other seedlings.will continue to monitor for improvement and ramp lights up a little later if needed as plants should grow into light.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

the cycle has come to an end, the plants have been harvested and are being cured. the mother yielded 421 grams of dry flowers the clones yielded 303 grams of dry flowers. the variety changed its smell during curing, it became even more pleasant, the smell of garlic is not felt, fruit spices, very complex. the variety is generally very strong, not suitable for beginners and for daily smoking. I am very glad that such a rich harvest came out.