The Grow Awards 2026 🏆
Processing
Likes
Comments
Share
@Dairon
Follow
Algunos de los ejemplares se han quedado bajos por las podas, de momento por que las sativas crecen durante mas tiempo despues de cambiar a 12/12 a ver que tamaño final tienen, para estimular e crecimiento vertical realizare una poda de bajos, pero me estan gustando bastante aunque bajas pero bien ramificadas, las altísimas temperaturas, de hasta 32º en algunos momentos ( cuando se acaba e agua del humidificador jejeje) no ayudan para nada, pero voy a seguir luchando contra él, uso Leaf Coat como preventivo y como queda como una fina capa de latex natural a la par de prevenir contra plagas, evita la deshidratación consiguiendo que las plantas sufran menos por las calores, buenos humos!!!
Likes
Comments
Share
Chiller installed to keep reservoir at 18c constantly. 100ltrs of 18c water also will help bring the ambient temperature down slightly in the room.
Likes
29
Share
@nonick123
Follow
Día 48 (10/06) Riego con 1 Litro H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/I +TopBooster 0,2 ml/l - pH 6.2 Día 49 (11/06) Riego con 1 Litro H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + K-Boost 0,5 ml/l + CaMg-Boost 0,5 ml/I +TopBooster 0,2 ml/l - pH 6.2 LCCA tiene unos colores espectaculares con tonos morados 😍 Subo el CalMag a 0,5 ml/L porque BPPA no se recupera, y el resto muestran inicio de deficiencia Día 50 (12/06) Está lloviendo mucho por aquí. Menos mal que tengo el techo de policarbonato en mi invernadero casero. Hoy no necesitan riego Día 51 (13/06) Riego con 1 Litro H2O + Regulator 0,15 ml/l + K-Boost 0,5 ml/l + CaMg-Boost 0,5 ml/I + TopBooster 0,2 ml/l - pH 6.2 Día 52 (14/06) Riego con 1 Litro H2O + Regulator 0,15 ml/l + CaMg-Boost 0,5 ml/I + TopBooster 0,2 ml/l - pH 6.2 Tiene un aspecto espectacular, con su cogollo central muy muy gordo y con unos reflejos morados preciosos Me parece increible que esta planta pueda ser capaz de acabar en las 8 semanas (menos de 60 días). Voy a empezar a mirar sus tricomas con el microscopio Día 53 (15/06) Riego con 1 Litro H2O + Regulator 0,15 ml/l + K-Boost 0,5 ml/l + CaMg-Boost 0,5 ml/I + TopBooster 0,2 ml/l - pH 6.2 En el microscopio se ven las antocianinas subiendo por los tricomas 😍 Día 54 (16/06) Riego con Té de Floración - 750 ml / planta 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
15
Share
Entering the 9th week things are going Splendidly, I had to adjust the lights up a bit as NLA#1, Suffered a little bit of what looks to be Light Burn, Other than that, The Girls are filling out nicely, and the aroma is kicking in good. I also decided too go ahead and start using Fox Farm Bembe, which to my understanding is a Molasses backed with Microbes for the Root Zone, That and I've Heard it's a natural sweetener as well. Thanks everyone thus far for the views and likes, One Love...
Likes
4
Share
60x60 cm tent in a 1920's peek-in-closet Oversized vent for silence High power DIY LED True SoG 12/12 from seed with 15 plants in 2L pots Watering all plants in bottom tray with 30% of total pot size (10L) WEEK 1 DAY 1 - Germinated in paper towel DAY 3 - Planted into pots + Lights ON at 125w DAY 5 - All plants have broken soil DAY 7 - Slight stretch - Light at 185w WEEK 2 Two of the Iced Out are lagging behind, others are on point - I'm trying to push light and nutes to the max. Extraction fan (AC infinity Cloudline T6) on level 2. DAY 13 - First full watering (10L) with 20 ml Canna Terra Vega DAY 14 - Circulation fan turned on (low) during lights on WEEK 3 Good growth, two Iced Out still lagging DAY 18 - Light at 225w, Extraction fan on level 3 during lights on DAY 20 - 2nd watering, 8L with 30ml Vega + Light at 250w DAY 21 - On point, mostly :) Could've pushed nutes a bit more from the go WEEK 4 DAY 24 - So far this week I'm just kicking back and watching them do their thing. The two lagging Iced Outs are trying to catch up. DAY 26 - Watering 10L with 50 ml Vega (one day too late...) + light on 300w (max) DAY 28 - 4 weeks from popping the seeds, looking good except for the two Iced Outs, one of them is trying to get with the program, the other... Well, some plants are just pricks. WEEK 5 I think this is the week we'll see them take off :) DAY 29 - Plants are starting to show sex, removed 2 Urkle Mints males, the other two are females, the rest are fems so we're down to 13 female plants total with only a single weakling DAY 29 - Watering 8L with 50ml Vega (shouldn't have been later than today!) DAY 33 - plants exploded over the last 4 days and most are stretching and starting to flower DAY 33 - Watering 10L with 60ml Vega (feeding Vega once or twice more then we switch to Flora) DAY 35 - Just cruisin' 😎
Likes
82
Share
Week 7 Flower We've finally started flush 💦 on Day 43. I still run EM1 at 1ml/ltr as it goes a long way once activated/stretched. It's always going to be a benefit to keep any microbes you can in the coco. You can also use Mammoth P throughout flush, but due to its price I just stick to EM1 in flush. There's plenty of other microbes that can be used too. I flush around twice the pots' volume at 6pH. But before flooding the pot I slowly pour water through the centre of the pot, around the stem, in order to take a true reading of the ppm and pH of the run off. If the ppm/ec reads a lot higher than your average feeding throughout bloom, then there's been issues such as a lockout, incorrect pH, over feeding etc. This wasn't the case, as this girls' was at the right level. If the pH is too high or low, I adjust the pH of the rest of the water that'll be flushed to try to fix it. Again, this wasn't the case with this girl as she had a perfect pH 👌👍 Just before all of the water has gone through the pot, I take one last reading from her last bit of run off. The ppm should be down to no more than 100ppm for the first flush (+starting ppm of water if using tap water). After the first flush the ppm value of the run off will quickly go all the way down to 0, or at least below 50ppm (+tap water ppm). I use tap water that is between 150-190ppm, but I'm looking to switch to RO as soon as I can. I still get a very good flush, but I think using RO water will be the next step in getting a more thorough flush as it won't contain even the small amount of nutrients and metals that tap water contains (along with any harmful chemicals). Always remember to bubble or let the water sit for 24-48hrs before feeding to your plants. That goes for all feedings in every stage of growth if using tap water. Because I keep fairly low temps in the Den she's starting to turn a beautiful dark purple. Her buds are still swelling and smelling like a nice gassy OG, with hints of citrus/tropical fruits. I'm really looking forward to taking this girl down, but after at least another week! Thanks for following and happy growing! 🐺
Likes
2
Share
@EyeMKing
Follow
Started the first top dressing of Gaia Green All Purpose and Power Bloom at a 50/50 ratio of 1tbsp/gal each.
Likes
22
Share
Crazy stretch, amazing structure looking fwd to see some 🌲🌲🌲 🤟🤟🤟 GHL
Likes
43
Share
Got some better shots without light and a little video my cam is a bit shit got a video of trichs also in there girls seem to be flushing well started flushing the quick one later than the others as wasn't as developed. Took the 2 tester buds of very bottom under the plants on the first day of flush to try estimate how long to flush for........last pic and vid before harvest next uploads will be harvest hopefully
Likes
12
Share
@MazzeoN
Follow
Todo viene muy bien, aplicamos LST a todas las plantas, exceptuando a 1 que no se que le pasa, presenta manchas en sus hojas y va mutando las manchas a todos los nuevos brotes. A la hora de hacer LST, a 1 de las plantas se le arranco una hoja y en otra de los plantas el tallo se quebró muy apenas, esperemos que no las estresen demasiado.
Likes
77
Share
They look like about another month on most of them. I'm interested in how big the buds will get, I'm used to having a big main cola instead of an even canopy. The dirty aquarium water has been doing great through flowering so far, no nitrogen toxicity. 3/11/22 - Defoliated for the last time! Defoliated so there's no moisture buildup between leaves, preventing PM. There were so many leaves, it looked pretty like a beautiful bush - but my intuition told me that those are going to hold too much moisture. Now there is enough space for the buds to fill out with even airflow throughout. They don't look as beautifully full after defoliation but they'll be cleaner & easier to trim come the end of flower. Aquarium water only: 6.82pH 395 PPM 73.4⁰F Nutrients added: 5Tbsp unsulphured molasses ¼tsp raw potassium ¼tsp raw phosphorus 2Tbsp concentrate Seaweed 1tsp mycorrhizal fungi powder Aquarium water after nutrients: 5.83 pH 787 PPM 73.4⁰F
Likes
20
Share
She got a nice fade going. Been feeding just ph’d water this week. Idk if she’s slowed down drinking or if my soil is a little water logged but the pots definitely staying heavier throughout the week. Dropped my light closer to the canopy but lowered the I reality slightly cause temps were creeping into the 80’s. I think we’re cruisin. Can’t wait to see how she turns out.
Likes
62
Share
@MeaCulpa
Follow
Happy new year! I switch to water in a week and then rinse for 2 weeks. Everything looks good so far. The only thing that worry me a little is the high humidity. In the small tent I have almost always under 50% humidity in the evening, In the large tent it is rarely below 60%-65%. Although my filter is supposed to make 243m³/h, my tent construction is probably too much for it. With 90% outside humidity since weeks, it's really a battle against windmills. I hope nothing gets moldy.
Likes
54
Share
@ASCBOOGS
Follow
Day 23 Veg have not topped yet only bit of LST and HST everything seems fine
Likes
4
Share
@Naujas
Follow
the girl is starting to bloom!!!!! I used LST this week, I didn't want it to get too high and become very visible, I don't want everyone around to see it :D:D Well, the girl looks really beautiful and healthy, although there wasn't much sun, but she got it for a few days:) good luck to everyone :)
Processing
Likes
74
Share
6th week I did burn her a bit and she got some lives with small yellow points Need to cut the newtz dark green color is normal for this strain did flush with water ph The flowers are like ltte roses smell like spicy peppery Hard to describe I think she will be ok I will take the led away can’t handle the heat
Likes
14
Share
Light is now at 100% intensity, and I have begun adding RAW BLOOM Microbes to the soil. Going to let it go another week before I defoliate again.
Likes
3
Share
@JBOrganix
Follow
Super burnt lol. Ooops I'll still finish her off and hope for the best. Should still be some decent smoke 👌
Likes
166
Share
@iMeus
Follow
As I said in the review this was a tough challenge. I'm hopeful that my second attempt at this strain will be successful. Growers Choice Seeds sent me a few more to give it another go. Alex from their customer service department was very helpful and asked to be kept updated on the progress of the CBD. I'm not sure if GCS will ever see this but here's a big thanks <3 Thank you guys (GD) for all the love and support! It was so awesome seeing the get well messages when I was well enough to sit down and check my computer. Seriously, I didn't expect all of that. I am better, still have a few open wound areas but the healing is happening! :) Much love you guys! Meus <3