Processing
Likes
Comments
Share
@jtgrow
Follow
Thursday, August 13, 2020 12:45pm: Watered: 1.25C PH 6.9 Friday, August 14, 2020 9:40pm: Main-lined: Topped at the 3rd node. removed everything below 3rd node. Saturday, August 15, 2020 1:20pm: Watered: 1.25C PH 6.1
Likes
15
Share
Für einen Steckling macht Sie sich richtig gut. Man merkt gar nichts mehr davon. Sie passt voll ins Bild.
Likes
20
Share
Hey folks, I'm finally back at it again. It took me a while for a couple of reasons: 1) I usually only grow in the winter. 2) I completely revamped my grow room after the issues I ran into with the last setup. 3) It took me a while to brainstorm exactly what I wanted to do. I bought these seeds from D.C. Seeds and was very pleased with the experience. I'm very happy to give business to a fellow American and Veteran. I've only ever purchased seeds from the UK in the past and that experience has been "dodgy" to say the least (not the vendors fault, but the transit). I've only ever grown photo's, but chose to go with all auto's moving forward. After calculating the intensity of my current light, with it being on a 20/4 rotation I'm very close to hitting 40 moles per day, at least directly under the light. It doesn't quite cover my 2' x 5' trellis. I'll eventually upgrade my light, but auto's should get me the best bang for my buck with this light. Also, I spent a pretty penny building this new grow room. The other obvious reason for growing auto's is their shorter seed to harvest time. I've got a small grow area, and never plan on expanding. Theoretically, auto's will allow me to produce the most out of my room. A few things about my grow room: 1) I lined the whole closet with 1/2" plywood and put that piece of ply the air intake/outtake/power as the divider between each side of the closet 2) The grow room itself has ply on all wall surfaces so I could mount stuff to it and paint it 3) The other side of the closet is my storage/prep/power distribution/etc. area. Maybe I'll take a pic one of these days 4) My last grow my carbon filter/fan was venting into the other side of the closet. This created a headache for a number of reasons. I tapped a 4" hole through the floor and am now venting into my crawl space below the house. 5) I moved to bubbleponics to speed up my grows even more. I will be removing the drip system once the roots hit the water in the res. 6) The larger res. will hopefully make my life much easier. Late in the last grow I could only fit 3 gallons of water in the bucket and that sucker was pounding down at least a gallon a day. That required too much micro-managing for me (both ph and refills). 7) I no longer have a fixed trellis with chicken wire. The trellis is held in place by dowels that I can pull out by hand. The short sides of the trellis have hinges on the bottom, so I can fold it and pull it out easy-mode. Lastly, I'll be using string for the trellis so come harvest all I have to do is cut the string instead of dealing with trying not to destroy buds pulling them through chicken wire (it takes forever). 8) I built a light diffuser on the other side of the air intake 9) My res. is on a motorcycle lift I'm using a drill to move up and down I have now started using Jack's as my primary nutes. They tell you the full break-down of each macro and micro nute, giving me more control and understanding. I think House & Garden is a good product, but when stuff goes bad it's more difficult to troubleshoot when you have no idea what each piece of their full lineup contains. I'm assuming it's kind of a proprietary type thing, which I understand, but knowledge is power. I am still using their Drip Clean (while the bubbler is going) and Roots Excelurator Silver, both excellent products. I'm still using Hydroguard, and will FOREVER. I'm a true believer now of why Hydroguard is necessary for any hydro application, IMO. I also purchased water soluble fulvic acid, but have decided not to use it for this grow....or at least while the bubbler is going (I'll elaborate below). Ok...now that all that is out of the way.... I really wanted to use my well water instead of R/O to make my life easier. Soooo....I filled up my res., and put two seeds in the system immediately. Nothing happened after 1 1/2 weeks. I finally opened up the cubes and saw that the beans had popped, but it looked like maybe I drowned them, or they ddin't grow straight up or something. For round two, I didn't change the water out, and decided to soak the beans for 24 hours in R/O water first. I had the exact same problem. I'm still not really sure what happend, but I suspect it was the well water. My PPMs were sitting at ~500 with the well water, which was probably too spicy for the beans just starting. Also, my well water is questionable (even though it's at 165ppm), but I won't elaborate further....it's a long ass story and I've spent an absurd amount of money on it. Lastly, I did put the Fulvic acid in, and it was very messy. I really want to avoid having to clean my res. Once the roots get big it will be a real pain in the ass to clean. I'm leaning towards not using the Fulvic acid this grow just to see how things go. I had 10 beans total of the Sour Apple and have already ruined 4. So here's hoping third times the charm. So, I went back to my tried and true method: 0) R/O water for everything. Ditching the well water idea. 1) Soak beans in R/O water for 24 hours 2) Paper towel method between plates on a heating mat 3) Once the roots pop, I place them pointed down in the hole of the rockwool cube 4) Hand water once a day by dipping the cube in the pre-mix of 1/4 strength Jack's and everything else I've listed above. This put my PPMs at 300...a way more reasonable value for starts. It's been exactly 7 days since I followed the above. It's probably hard to see but the cotyledons came up, and multiple roots have come out the bottom of the cubes....way faster than I've ever seen since I started growing. That means even though I'm doing my old process this already shaved at least a week off of when I'd normally put it in my bucket in the past.
Likes
38
Share
Day 65 (12/31): no change. Day 66 (1/1): I'm thinking the plant on the left will be finished before the plant on the right. The leaves seem to be fading and the trichomes seem to be more mature on that plant also. 11pm: just watered the plants nutes. Same as last time. Left plant 6mL micro 12 mL bloom. Right plant 8mL micro 16 mL bloom Day 67 (1/2) Day 68 (1/3) Day 69 (1/4): just got home from a trip. Plants seem to be doing fine. Nearing the end I assume. Plants will probably need water tonight 10pm: just fed my plants nutes again. Both plants received 8mL of micro and 16 mL of bloom. Day 70: (1/5) Day 71 (1/6): plants look good this morning. The left plant is definitely nearing the end of its life. The plant on the right still could have another week or more. Just posted a video: plant on the left definitely doesn't have very large or dense nugs but it has a lot of them. The plant on the right has some super dense nugs. I'm excited to see what they both yield.
Likes
12
Share
@CheeRz
Follow
Lady runtz has started to form buds. I'm more than happy with the growth so far. Meanwhile I'm having problems with the height. I'll probably have to remove the fan and charcoal filter from the tent to make more room at the top.
Likes
9
Share
@Gisbert
Follow
Es sind noch ein paar cm dazu gekommen und ich bin mit der Blütenentwicklung recht zufrieden. Der Bereich um die Blüten ist wundervoll bepudert. Das Wetter bleibt wechselhaft bis schlecht! Das Wetter bessert sich, leider habe ich einen massiven Befall von Trauermücken, Nematoden sind bestellt.
Likes
43
Share
Martedì 20/02/2024 Inizio controllo 2027 ec 5.5 ph Cambiamo soluzione e iniziamo con i nuovo dosaggi da prefioritura Aggiungiamo 75 lt demineralizzata Base 285 ec 7 ph Aggiungiamo i nutrienti per 80 lt 160 grow 160 micro 120 bloom 90 sensizym 90 calmag 90 rhino skin 90 bud candy Otteniamo 2146 ec 6.3 ph Aumentino al 100% la nostra mars hydro fc6500 e la teniamo a 30 cm di distanza.
Likes
14
Share
@Sadhus
Follow
# Journal de Culture Cannabis - Eternity Grow Cup 2 (Zamnesia x Plagron) 2026 **Grower :** @Sadhusfrgrow **Localisation :** Luxembourg **Strain :** Sticky Broccoli (Zamnesia Seeds) - Féminisée **Description de la variété :** Sticky Broccoli est une variété indica dominante (90 %), avec un THC à 23 %. Elle présente des arômes sucrés, épicés et floraux persistants, des plantes compactes et résineuses, idéales pour des rendements élevés en culture contrôlée. **Setup général :** - Substrat : 100 % coco Plagron, offrant un drainage supérieur et une oxygénation racinaire. - Pots : Définitifs de 5 litres, pour un développement racinaire sans contrainte. - Irrigation : Automatique Netafim Drip (Netadrip), cycles de 2 minutes par heure × 14 (soit ~200-250 ml/shot, ajusté pour ~6-8 % humidité substrat), suivis d'un dry back de 15 % pour promouvoir la santé racinaire. - Contrôle : TrolMaster full setup pour une automatisation complète (voir présentation ci-dessous), incluant climatisation, humidificateur/déshumidificateur, chauffage, extracteur/intractor d'air, ventilateur, pompe à eau, chauffe-eau avec bulleur et agitateur, pompe à eau usée, table de drain DIY, et barre UV/IR pour spectre étendu. - Nutrition : Plagron Coco (A&B, Power Roots, Pure Zym, Green Sensation). EC tank 2,0-2,5 mS/cm, pH 5,8 stable. - Éclairage : Cycle 18/6 végétatif, hauteur lampe 80 cm, imitation lever/coucher de soleil + 30 min IR chevauchant les lumières principales ; PPFD ~550, DLI ~35 mol/m²/jour. - Objectif : Préparer le switch à 12/12 dans quelques jours pour floraison, avec clonage pour préservation génétique. - Mises à jour : 2 plantes robustes ; LST relâché pour permettre une expansion naturelle, défoliation et FIM maintenus pour structure buissonnante. Présentation du setup TrolMaster : Le système intègre une climatisation pour régulation thermique précise, un humidificateur/déshumidificateur pour VPD stable, un chauffage d'appoint, un extracteur/intractor pour renouvellement d'air (taux CO2 cible 900 ppm), un ventilateur pour circulation, une pompe à eau avec chauffe-eau, bulleur (oxygénation) et agitateur (homogénéisation nutriments), une pompe à eau usée pour évacuation automatique, une table de drain DIY pour collecte runoff, et une barre UV/IR pour booster résine et terpènes. Photos jointes montrent le dashboard et graphs pour monitoring en temps réel. ## Semaine 4 : Croissance Végétative Avancée (8-14 février 2026) ### Contexte et Objectifs de la Semaine Cette semaine marque la fin de la phase végétative intensive, avec préparation au switch 12/12 prévu dans quelques jours. Nutrition Plagron poussée à EC 2,0-2,5 (Cocos A&B 2,5-3 ml/L, additifs stables) pour soutenir la biomasse accrue, pH tank maintenu à 5,8. Irrigation affinée : Cycles de 2 min/h × 14 (total ~2,8-3,5 L/pot/jour), dry back 15 % pour oxygénation et prévention des pathologies racinaires. Éclairage optimisé pour DLI élevé, favorisant une photosynthèse maximale sans stress. Techniques : Défoliation sélective (retrait de feuilles ombrageantes pour aération), FIM pour multiplier colas, LST relâché (attaches assouplies pour croissance naturelle tout en maintenant canopée plate). Clonage planned pour préserver phénotypes potentiellement élites. Objectifs : Maximiser la vigueur pré-flo, avec grosse défoliation à venir (retrait tout en dessous du 1er treillis pour concentrer énergie sur buds supérieurs). EC/pH runoff légèrement inférieurs à l'input, indiquant absorption efficace sans accumulations. ### Observations des Plantes - **Jour 22-24 (8-10 février) :** Plantes vigoureuses, envergure ~40-45 cm, hauteur bridée à 18-20 cm par treillis. Défoliation mineure et FIM confirmés ; LST relâché pour permettre extension latérale sans contrainte excessive. Racines denses et blanches (inspection via pot transparent). EC runoff 1,8-2,2 (légèrement input), pH 5,7-5,9 stable. Irrigation : 14 shots/jour, dry back 15 % mesuré (moist descend à ~60 % avant recharge). Pas de signes de stress ; feuilles vertes profondes, envergure 18-20 cm. - **Jour 25-26 (11-12 février) :** Croissance explosive ; structure à 6-7 nœuds, branches secondaires robustes grâce au FIM. Relâchement LST complet pour préparation flo ; défoliation supplémentaire pour pénétration lumineuse. Clonage initié au jour 25 : Boutures apicales prélevées, placées en propagateur avec Power Roots. VPD stable, favorisant transpiration saine. Runoff analyse : EC légèrement inférieur (absorption NPK optimale), pH stable sans drift. - **Jour 27-28 (13-14 février) :** Plantes prêtes pour switch ; envergure 45-50 cm, hauteur 20 cm. Dernière défoliation légère ; tout est sain, sans pests ou carences. Plans pour grosse défoliation post-switch : Retrait feuilles/banches sous treillis pour focus sur tops. Clones enracinés ~20 %, à monitorer. ### Paramètres Environnementaux (Analyse des Données TrolMaster) Basé sur captures TrolMaster pour "Coco Test" (moyennes semaine 4, jours 22-28) et dashboard live (15/02/2026), avec graphs montrant tendances stables sur 24h/semaine. Graphs indiquent fluctuations contrôlées : Temp/Hum stable avec pics mineurs, VPD constant, Light cyclique (jour/nuit), pH/EC solution sans spikes majeurs, moist moyenne 75 % avec dry backs visibles. CO2 non mesuré (ambiant ~400-500 ppm ; cible 900 non atteinte). Augmentation PPFD pour DLI cible 35. - **Température (°C) :** - Moyenne Jour : 25,2 °C (dashboard 25,8, cible 26 pour veg fin). - Moyenne Nuit : 23,1 °C. - Max Jour : 26,5 °C ; Max Nuit : 24,3 °C. - Min Jour : 22,8 °C ; Min Nuit : 21,7 °C. Stabilité : Variations
Likes
12
Share
Likes
19
Share
@DE_BW
Follow
Flower Week 3 – Starting to Stack Despite the visible feeding damage, the Pineapple Kush continues to develop beautifully. The buds are starting to stack nicely now, and she is filling out across the entire plant. For the first time, it also feels like the pest problem has finally stabilized rather than continuing to spread, which is a huge relief. She is definitely a hungry and thirsty plant at this stage and is going through quite a lot of water. Overall, though, she remains vigorous, healthy, and productive. So far, this has been a really enjoyable grow despite the pest pressure!
Likes
7
Share
Привет друзья. Наше знакомство продолжается с новым фотоцветущим растением от Smail_Seeds сорт ORIGINAL CHEMZKITTLEZ F1 reg. Сегодня растению 73 дня. Перевёл на 12/12 1.10.2023 Растение очень хорошо развивается, ни каких сбоев в генетике не наблюдается😀 Сорт выводим сами. Смотри мой профиль, у нас всегда есть что то интересное. Не забудь поставить лайк❤️, если понравилась как прошла неделя И читайте наш TELEGRAM: https://t.me/smail_seeds #Smail_Seeds 😀
Likes
20
Share
@reirrac1
Follow
Chopped her at exactly 12 weeks old. She was covered completely in good sized and trichome laden flowers, absolutely no larf whatsoever. Fan leaves stuck out clearly and were quite easy to remove, minimal processing needed for this strain. Gives off the scent of kushy must and sweet fruit. Extremely easy grow, heavy feeder, and very easy to train out perfectly. I will grow this strain again soon.
Likes
18
Share
@JO_GROW
Follow
Hello all, another trouble free week here. Moved her off of the usual nutrients and she has a week of dragon force and sumo boost to ripen and finish off the buds before next week when she goes into flush for a week. Trichomes are all cloudy now so it's nearly time to harvest. Can't wait!
Likes
7
Share
@Hangman
Follow
So far so good. They are starting to fatten up really nicely. The plant which was a hermie develops seeds inside the buds as I can see, the other two look fine. Also the plants start to show a bit of color which I am really looking forward to.
Likes
10
Share
@4F1M6
Follow
Stretch is done and flowers are piling on now! I treated with lost coast as a preventative. I kept the feed the same but it will be altered end of grow week. Canopy is getting hella full can't wait to watch these colas stack on. Until next update. Happy growing and stay lit fam.
Likes
8
Share
Likes
14
Share
D78/F34 - 17/06/23 - I changed light schedule hoping she's going better. (6 only red ligh and 7 red-white) D79/F35 - 18/06/23 - New lights schedule is running D80/F36 - 19/06/23 - Added water and integrators EC 1.0 and pH 6.4 D81/F37 - 20/06/23 - Nothing to report D82/F38 - 21/06/23 - Added water and nutes EC 1.0 and pH 5.7 D83/F39 - 22/06/23 - Temp is too high for both water and environment. I see signals of suffering on the flowers (foxtailing) D84/F40 - 23/06/23 - I'm trying to keep the Tremp under control but isn't easy. To lowering water temp (that now is about 26 °C) I'm adding some ice to the water
Likes
3
Share
@BiggSteph
Follow
🖖🏾👀🖖🏾
Likes
5
Share
@MMorrelo
Follow
sorry for not uploading photos instead of that i post video! plants are doing great seems like on plant number one male flowers dont appear there was only one male flower which i caught on time on week 6