Día 9 (10/06) N/A Día 10 (11/06) N/A Día 11 (12/06) Llueve mucho. Humedad alta por aquí. Eso les favorece Día 12 (13/06) Se empiezan a desarrollar las hojas verdaderas a una buena velocidad! Todo en marcha! 💨 Día 13 (14/06) Riego ligero 100 ml sólo H20 EC 0,5 en previsión del trasplante en el día 15 de la planta Día 14 (15/06) Se nota que estamos en el día 14 desde germinación y la mayoría de las plántulas van viento en popa! Día 15 (16/06) Hoy procedemos a trasplantar a las chicas a su maceta intermedia de 6,5 litros Se prepara con 5,5 Litros (85%) de sustrato PRO-MIX HP BACILLUS+MYCORRHIZAE + 1 Litro de Insect Frass (15%) + 65 gramos de Earth Vibes Super Soil (10 g/L substrato) Se llena la maceta de sustrato con las manos (limpias) y rompiendo los trozos más gruesos, para que el sustrato esté aireado y esponjoso, sin presionar Se coloca una maceta vacía de 1L para que quede la forma perfecta de la maceta donde están las plántulas (ver fotos) Se espolvorea la parte proporcional de la probeta de microorganismos sobre el agujero de trasplante Se saca la plántula de su maceta actual (bonitas raíces 😍) y se coloca en la maceta final Se riega muy lentamente hasta percolación profunda con H2O EC 0,5 pH 6,5 Se coloca mulch (acolchado) de paja para evitar traspiración excesiva y cuidar a los microorganismos del suelo A ver como reacciona al trasplante! 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

EXOTIC SEEDS STRAWBERRY COLA Effect - Relaxed Genetics - ((Strawberry Banana X Mango Cream Auto)F4 X Monster Mash) F3 Yield - 550 - 600 G/M2 Potency - High Flowering Time - 8 Weeks Great auto strain for beginners to veteran growers.. No problems with her throughout grow.. She's extremely short, stocky and produced very tight resinous flowers with beautiful colours all over her!.. Initial smoke after dry and simple curing was very pleasant fruity cola with a skunky after taste.. Nice and relaxing buzz from her also.. Definitely worth growing again.. www.exoticseed.eu https://www.viparspectra.com/?aff=454&utm_source=affiliate https://partners.viparspectra.com/create-account?ref=454 Coupons - code: Itxsgdvip code: JEF https://www.amazon.com/dp/B08CHCFCG1?ref_=ast_sto_dp

Eight weeks of flowering I raised the PH to 6.3 and the plants that showed phosphorus deficiency no longer presented the problem, the absorption must have improved since the fertilization was the same. But as not everything is wonderful in this life in the last week here in the city where I live we had a great cold front 10º C. Inside the grow the temperature varied at least 13.5ºC during the night and light off and 20º during the day with the light on, the cold always stops growth but the formation of buds is going well apparently. Definitely plant # B3 is either photoperiod or locked, it has white pistils on the stem indicating pre-flowering but even before entering the flowering period I don't know what to do lol.

Pow pow and welcome back 🙅‍♂️ Week3 of Flower starting today. Last week stretched those ladies very nice and now we can see that power is going to bud production 😍 Checked the stems and the highest one is reaching 45 inches tall itself. Absolutely delighted 😃 We are cutting Roots Excelurator and CalMag Extra from the regime as they will not need it anymore. I’m still struggling a lot with high humidity levels hitting 70-80% quite often - still, there is good exhaust system and lots of air movement with temperature between 21-26. For now completely no sign of Mold or bugs 🐜 🤞 Stay tuned and look for daily photo updates 🤘 Update Day4 (day 18 of flower) Buds starting to fill the whole tent everywhere I look 👀 Invested in RAM 10l dehumidifier and now both girls are in sweet point...second advantage - I’m getting back free 0ppm water 😍 Stay tuned!

Spicy Temptation GPP

Song of the week : Jingle bells 🌲 14.12 Boom bang 🔥 ! I think I've found my outdoor 12/12 Autoflowering phenotype , with this height , that shape in a 7tL pot , the flowering under 18/6 , and the vigour : she have all that I was searching for. Now I have to wait and see for the flowering and yield to really know if I've found my winner I also hope that the sex reversion will be effective soon but to stop doubting I prefer to spray it again with sts Now concerning her health and feeding : she has been feed with 1 tea spoon of Mr.B's Green trees Bloom because it's time to push some more pistils but on the other hand the lower leaves are starting to yellowing a bit so suspect her to be or a huge eater or that the pot is so small that she need to be feed at each watering. Whatever it could be she will 're rice s little amount of beg nuts this week then I'll get back to the regular feeding ✌️🏼🦎 ------- 15.12 - I have made 2 videos today. One to show you how it rain in my country and the second to show you the wind during the rain. A regular rain not the hard one

Kicking off week 5. Did some extra work on the LST. Making sure the light penetrates all bud sites. I now understand that my initial goals are too far from what I actually will harvest..mainly due the PH issue we faced on week 4. Let's see how it goes.

Well, I reckon the girls have reached the end and it's time to chop. Trichomes are mostly milky (some amber), so now it's a matter of getting some free time and cut them down. Thanks to all those who follow me on this journey. It won't be long til I start a new experiment in Piquillo's Lil Lab. Of course I will updated before putting them in jars. Happy growing! 😉

She just has massive leaves shading stuff out so had to massive prune I didn't want to train her cuz I'm training every other auto out I wana see what does better trained or non trained I've been using bud clips from bud trainer to do training it's been awesome I haven't used them on this cultivar jus some garden wire tune in to the podcast on youtube @sundaesesh

Day 48 Gelato - day 48 - Defoliation was done. The broken branch healed and sprouted new branches. She cannot boast much about his height. But it is very beautiful, I hope we will grow 50 centimeters in flowering 👌 Day 44 Peyote - The growth process continues unabated. I am waiting for the desired size. 8 days after flowering it didn't grow as much as I thought it would, so we went back to the growing season. 👽 Day 49 Peyote - I decided not to cut the leaves anymore after much defoliation. It easily tolerates strong stress easy to grow.

Hi from Iran

Day 57 - Yesterday I noticed that the leaves are darker than they should be, so I re-made the mixing solution lowering the PPM from 750 to 550. I've tried to raise it to see how much nutes that ladies can handle since it's my first time in coco and I like to experiment. Now I'm going to finish this mixing solution and then stabilize the next ones on 650 PPM. Keep learning every day 🙏 Day 60 - Today I added one extra equivalent 75W LED to give the lower nodes more power. Some fan leaves touch it, wish they will not burn. New update in the next days.

Hello everyone, These girls are doing good, getting bushier and they have a way better smell than last year, Im waiting till the pistles get longer so I can take one and cross breed her for next season, lets see how it goes... See you guys next week🤘🤘👊👊👊

Hace una semana pasamos a flora, hace mucho frio asiq incorporamos una lampara de ceramica para reptiles, que solo da calor. Apliqué tricodermas foliar esta semana para prevenir hongos. Les puse unos clips lst a algunas ramas que se venian estirando bastante mas que otras asi no tengo tanta diferencia de altura entre ellas

First week - crappy Timelapse video posted.

Day 70-77 (Day 71) Not exactly sure why but node spacing on bbb 6&7 is super tight still. Their stems are also harder and less bendy, almost like they’re root bound. Bbb #5 in my veg tent is looking bizarre and I’m at a loss for what to do. I’ve been looking up and asking around about the leaf crinkle and no one seems to know what’s wrong. Trashing a pheno of this would hurt. It could be a keeper too as I don’t think the problem is genetic. It’s definitely root bound but that doesn’t cause contorted new growth like that. I’ve concluded that it’s my dense soil coupled with root bound issues, overwatering and high RH. (Day 72) Later tonight I’m going to give bbb 5 a bath tub flush until it’s reading 200ppms, drain it well and then transplant into a 3g pot with lightly amended soil. I’m also going to give it a light defoliation. I don’t mind stressing the shit out of this plant right now because I won’t be flipping for another week at least. With the small container it will run out of amended nutes mid flower so I will hit it with a few synthetic feedings around then to test out the smokabilty and taste compared to organic nutrients. I might as well give the rest a good defoliation on the rest of the plants too. I will try to get most of what is under the trellis. (Day 73) I definitely defoliated #7 waaay too much. Since it’s tucked away in the corner and a really bushy plant I can’t train it as well as the others. I cut most of the sucker branches and the majority of the lower fans. This should prevent the need to defoliate at all until week 3 of flower. (Day 74) I’ve been reading that higher temperatures with a high RH can affect growth big time. It could be what’s causing all the crinkling and twisting. And now that the plants are in very late veg they could probably benefit from a lower RH. When I was running my temps around 74-78F and 70% RH I was in the perfect range. Now that I’m around 82-86F with the same 70% RH that could be what’s causing it. Hotter air holds more moisture than cooler air and proper vpd at 84F is around 75-80%. I’m going to turn up the speed on my carbon filter and set my controller to 75%. If I don’t see a difference or it gets worse I will drop to 65 and go from there. (Day 76) I finally got the lights raised up another 4 inches or so. It’s not much but it should help reduce the intensity and stretch the nodes more. I’m starting to think the super tight node spacing and droopy/contorted growth has more to do with something I’ve been reading about called ‘soil compaction’. Apparently farmers often deal with compacted soil in fields from running tractors over it all day. When I potted the plants I gave them a good little jiggle to compact the soil down further so I could fit a bit more in the container. I think this could be the culprit as they don’t seem to be drying out evenly. Even the plants in my other room are not drying out like they should and it’s probably from compacting too. With the addition of rock dust and dry amendments the soil can become sandy/clay like and retain a lot more moisture. Wish I would have added a few more liters of perlite and packed the soil a bit looser. Either way I need to get this problem sorted ASAP before I get root rot. Earlier in the season when I overwatered, I stuck a fish tank air pump into the soil and it aerated the soil enough to prevent overwatering. The only reason I discontinued it is because it didn’t have much effect in the 1.7g pots. I just ordered a 36w 6 way fish tank pump that is way more powerful. It was 50 bucks and I’m willing to take a gamble on it. It seems to be my only option at the moment because I can’t just repot. Worst case scenario I can use it for brewing compost teas if it doesn’t work. I’m not sure how well this will work in a giant fabric pot but it’s worth a shot. I’ve heard of people supplementing additional air into raised garden beds with great results. I’m picking off some of the new auxiliary branches to try and widen the node spacing. Growth is definitely slow and stunted but no signs of deficiencies. I just thought of another theory on the node spacing... and the more I think about it, the more I think it’s the mystery problem. I’ve been foliar spraying with 1-1-1 VeloKelp at pretty high concentrations 2-3 times per week. I have heard in passing that kelp and seaweed can somehow reduce stretch. A quick google search reveals that Ascophyllum Nodosum Seaweed and other marine algae extracts contain large amounts of hormones and auxins that reduce plant height and stretch. *facepalm* Guess I’ll stop that for the rest of the cycle. As far as I know there is nothing I can really do but wait for the plant to use up all those excess hormones and nutes. The recent 0-0-15 seaweed extract and 1-0-3 kelp meal I bought is derived from the same kind as the velokelp. I guess I won’t use it again until week 3 or 4 in flower. Tight nodes are very useful in flower but aren’t desirable at all in when trying to scrog in veg. Especially when they’re like a half inch apart. It slows the shit out of a grow. Vietnamese and biker gangs in my area used to grow SOG style and use a synthetic PGR hormone (meant for bonsai trees) called ‘paclobutrazol’ that would make the weed rock hard dense so they wouldn’t have to pay people as much to trim it. I’ve heard that in recent years they have made the switch to using kelp extracts because paclo is getting harder find and is not meant for food crops let alone smokeable crops. I’m ashamed of it but I have smoked pounds of PGR weed long before I knew what a PGR was. 🤷‍♂️ (Day 77) One more theory. Ever since raising up the plants up onto that shelf the root zone is probably significantly warmer and the bottom of the pot (where most of the roots are) drys out way quicker. It’s possible that the warmer root zone could not be holding dissolved oxygen at the proper rate resulting in that over/underwatered look. Or it could be that I’m not watering enough at once to reach the bottom of the pot where the roots are and it’s indeed under watered. I’m going to water in a gallon when I get my new air pump and see if that makes any positive change. If I see the new air pump making a difference, I will flip on the 21st of April. If I don’t see a difference, I will carefully untangle the plants from the scrog net and remove the shelf. That extra foot should make a massive difference with ppfd and will cool down the roots significantly too. I’m thinking about grabbing a simple soil/compost thermometer to check the temp of the medium. Better safe than sorry. Rough week. Hopefully everything get smoothed out in the next little while before I flip.

Back to the 1000 wt as temps here are modest for July atm. Still 1 plant not flowering like the other 2. I will be patient as it’s overall structure looks amazing. Slowly easing into the process not as much anxiety about every little thing. Changed my light out for my lower power 600 wt led instead of the 1000wt TMLAPY. Maybe not the right move i really don't know what to do b/c i have tip burn and my tent gets a bit hot in the low 80s when its in the 90s here in Illinois. I have an makeshift cooler w fan and some fans and my exhaust fan system which im pretty sure is under powered and overall and bad beginner purchase. I will upgrade as soon as i can financially afford to. Also had flooding issues in basement which is always an adventure, i eventually need a better way to get my grow tent up off the ground b/c water does get in there sometimes. Doing everything in my power to avoid mold and have fans and filters and cleaning, but again this may have been a beginner mistake and i may have to find a new home for the tent for the next time. Also I definitely had been under watering the girls and came close to one of them dying and have to remove some yellow leaves at bottom, they all look stable now. 1 out of 3 plants has a darker color and looks fuller and healthier w less tip burn but it is shorter only has a couple of hairs where the other 2 are going full on into flowering with so many hairs and growing much taller. Possibly stunted the growth... Anyway the word of the day for this week is TIP BURN. I will submit a question to follow. i recently uploaded a video that should show all 3 plants w the tip burn.