Likes
Comments
Share
@mrZot
Follow
En esta semana nos hemos atrasado un poco con el post . Y he estado fuera todo el finde . Hemos encontrado carencias y algun exceso de agua . En unos dias empezaremos con canna A yB
Likes
20
Share
@apmcfly76
Follow
Harvest, one plant no, it’s time to trim done this one was a good lesson.
Likes
225
Share
@yan402
Follow
🌸🍭✨🍬🌈🍭✨🍬🌸🍭✨🍬🌈 Hi and welcome to a first @KanOrganics run! This time I’m running Fantasy Feast (6x regular seeds). Gonna veg them under 24hr light with a mix of LST and topping β€” might let one go wild for fun. Still prepping the tent, need to transplant all my tomatoe and paprika plants to free up some pots, gonna sow tomorrow (14.04.25) 🌸🍭✨🍬🌈🍭✨🍬🌸🍭✨🍬🌈 πŸ’­β—πŸ’­β—πŸ’­β—πŸ’­β—πŸ’­β—πŸ’­β—πŸ’­ ❗Events & thoughts worth noting❗ πŸ’­β—πŸ’­β—πŸ’­β—πŸ’­β—πŸ’­β—πŸ’­β—πŸ’­ 12.04.25 (GW1) Cleaning old coco coir & prepping pots. Might need to hydrate extra bricks. This is how I recycle my coco coir β€” fast, cheap, no BS. 🌿 Harvest plant βœ‚οΈ Chop roots small β€” they stay in for structure (organic perlite) πŸ’¦ Hot water rinse β€” remove salts & dust 🍢 Pre-soak with light feed: Micro 10ml Grow 0ml Bloom 0ml GreenBuzz 10ml Cal-Mag 60ml FPJ 10ml pH down (citric acid) ♻️ Media stays β€” Roots stay β€” Back in service. 14.04.25 (GW1) Sow 6x Fantasy Feast βœ… 16.04.25 (GW1) did final tent clean up and all set up now βœ…πŸ“ΈπŸ“ΈπŸ“Έ 18.04 25 (GW1) All 6 germinated πŸŽ‰πŸ‘Œβ™₯οΈπŸ“Έ πŸ™@resi_max 26.04.25 (VW1) using the new Batch of FPJ/FFJ https://growdiaries.com/diaries/266849-grow-journal-by-yan402 00.04.25 (?W?) Transplant to...WIP, βœ… 04.05.25 (VW3) Topped all of them to the same size except #4 which probably won’t make it. #5 is showing classic small pot symptoms, all 6 are droopy so left them to dry a bit,I overwatered them apparently, I'll be repoting tomorrow in bigger pots probably 9l, *repoted in 11l potsβœ… 30.04.25 (VW2) – Increased TriPartMicro & GreenBuzzBloom 10ml β†’ 15ml 03.05.25 (VW2) – Increased TriPartMicro again 15ml β†’ 20ml 13.05.25 VW4 Increased TriPartMicro to 30ml and GreenBuzzBloom to 20ml. 24.05.25 VW6 increased GreenBuzzBloom to 30ml 01.06.25 VW7 At least 4 are female πŸŽ‰πŸ₯‚ by next week I'll be choosing 2 or 4 to finish off. 05.06.25 VW7 Did a cleanup πŸ“ΈπŸ“Έ 10.06.25 VW8 kept #1-4, #5 and #6 are going to the balcony with a new diaryπŸ“ΈπŸ“Έ 14.06.25 VW8 did a cleanup HST session πŸ“ΈπŸ“Έ (VW9) 21.06.25 VW9 Switched lighting to 12 hours. 28.06.25 VW10 Girls a stretching nicely and are eager to show their pistils. 29.06.25 VW11 increased GreenBuzzBloom 30β†’ 60ml 06.07.25 FW1 TriPart Micro: 50β†’ 30ml TriPart Bloom: 0 β†’ 20ml Home-made FFJ/FPJ (Watermelon + Pumpkin): 10 β†’ 30ml 12.07.25 FW1 GreenBuzzBloom 60 β†’40ml, TriPart Bloom: 20 β†’ 40ml, fpj 30β†’60ml 22.07.25 FW3 TriPartMicro 30β†’20ml , TriPartBloom 60β†’80ml , GreenBuzzBloom 40β†’50ml 24.07.25 FW3 Cal-Mag 60β†’40ml 26.07.25 got thrips but handled them with extra airflow and defoliation. 29.07.25 FW4 GreenBuzzBloom 50β†’20ml, Home-made FFJ/FPJ (new batch) 60β†’120ml 04.08.25 FW5 Fantasy Feast #3+4 are showing signs of maturity so I created nutrient schedule #2 just for those two. 05.08.25 FW5 decided to harvest the tops of Fantasy Feast #3+4 for two reasons: no1 I want a "speedy" high, no2 I have thrips in the tent and even though they are under control it doesn't harm to get the tent dryer with more airflow and 2 "half" plants less, πŸ“Ή Fantasy Feast #1 wet trimmed: dry trimmed Fantasy Feast #2 wet trimmed: dry trimmed Fantasy Feast #3 wet trimmed:104.3g, dry trimmed: Fantasy Feast #4 wet trimmed:, dry trimmed : πŸŒ±πŸ’¦πŸŒ±πŸ’¦πŸŒ±πŸ’¦πŸŒ±πŸ’¦πŸŒ±πŸ’¦πŸŒ± 🌿 Day to day tasks & actions 🌿 πŸŒ±πŸ’¦πŸŒ±πŸ’¦πŸŒ±πŸ’¦πŸŒ±πŸ’¦πŸŒ±πŸ’¦πŸŒ± 02.08.25 FW4 – Fed 3l of #1 β†’ 1.5l runoff 03.08.25 FW5 – Fed 3l of #1 β†’ 1.5l runoff 04.08.25 FW5 – Fed 3l of #1 β†’ FF#1+2, – Fed 3l of #2β†’ FF3+4β†’ 1.5l runoff 05.08.25 FW5 – Fed 3l of #1 β†’ FF#1+2, – Fed 3l of #2β†’ FF3+4β†’ 1.5l runoff 06.08.25 FW5 – Fed 3l of #1 β†’ FF#1+2, – Fed 3l of #2β†’ FF3+4β†’ 1.5l runoff 07.08.25 FW5 – Fed 3l of #1 β†’ FF#1+2, – Fed 3l of #2β†’ FF3+4β†’ 1.5l runoff 08.08.25 FW5 – Fed 3l of #1 β†’ FF#1+2, – Fed 3l of #2β†’ FF3+4β†’ 1.5l runoff 09.08.25 FW5 – Fed 3l of #1 β†’ FF#1+2, – Fed 3l of #2β†’ FF3+4β†’ 1.5l runoff (*RUNOFF reused for tomato plants) πŸΆπŸ’§πŸΆπŸ’§πŸΆπŸ’§πŸΆπŸ’§πŸΆ πŸ’§ Nutrients in 30L #1 only for FF #1+2 πŸΆπŸ’§πŸΆπŸ’§πŸΆπŸ’§πŸΆπŸ’§πŸΆ πŸ’§ TriPart Micro: 10 β†’ 15 β†’ 20 β†’ 30 β†’ 40 β†’ 50 β†’ 30 β†’ 20ml = 0.67ml/L 🍢 TriPart Grow: 0ml = 0.00ml/L πŸ’§ TriPart Bloom: 0 β†’ 20 β†’ 60 β†’ 80ml = 2.67ml/L 🍢 GreenBuzz Bloom: 10 β†’ 15 β†’ 20 β†’ 30 β†’ 60 β†’ 40 β†’ 50 β†’ 20ml = 0.67ml/L πŸ’§ Cal-Mag: 60 β†’ 40ml = 1.33ml/L 🍢 Home-made FFJ/FPJ (new batch): 10 β†’ 30 β†’ 60 β†’ 120ml = 4.00ml/L πŸ’§ pH Down: Citric acid (BuxXtrade) β€” adjust to ~pH 6.0 πŸ“¦ TOTAL: 280ml per 30L πŸ”¬ 9.33ml/L πŸΆπŸ’§πŸΆπŸ’§πŸΆπŸ’§πŸΆπŸ’§πŸΆ πŸΆπŸ’§πŸΆπŸ’§πŸΆπŸ’§πŸΆπŸ’§πŸΆ πŸ’§ Nutrients in 30L #2 only for FF #3+4 πŸΆπŸ’§πŸΆπŸ’§πŸΆπŸ’§πŸΆπŸ’§πŸΆ πŸ’§ TriPart Micro: 10 β†’ 15 β†’ 20 β†’ 30 β†’ 40 β†’ 50 β†’ 30 β†’ 20ml = 0.67ml/L 🍢T.A FinalPartRipen 20ml = 0.67ml/L πŸ’§ TriPart Bloom: 0 β†’ 20 β†’ 60 β†’ 80β†’ 0ml = 0.00ml/L 🍢 GreenBuzz Bloom: 10 β†’ 15 β†’ 20 β†’ 30 β†’ 60 β†’ 40 β†’ 50 β†’ 20ml = 0.67ml/L πŸ’§ Cal-Mag: 60 β†’ 40ml = 1.33ml/L 🍢 Home-made FFJ/FPJ (new batch): 10 β†’ 30 β†’ 60 β†’ 120β†’ 200β†’ 100ml = 3.33ml/L πŸ’§ pH Down: Citric acid (BuxXtrade) β€” adjust to ~pH 6.0 πŸ“¦ TOTAL: 200ml per 30L πŸ”¬ 6.67ml/L πŸΆπŸ’§πŸΆπŸ’§πŸΆπŸ’§πŸΆπŸ’§πŸΆ βš™οΈβœ‚οΈβš™οΈβœ‚οΈβš™οΈβœ‚οΈβš™οΈβœ‚οΈβš™οΈ βœ‚οΈTools & equipmentβœ‚οΈ βš™οΈβœ‚οΈβš™οΈβœ‚οΈβš™οΈβœ‚οΈβš™οΈβœ‚οΈβš™οΈ βœ‚οΈ 2Γ— MarsHydro SP3000 βš™οΈ MarsHydro 150mm ACF Ventilator βœ‚οΈ Trotec dehumidifier (big unit) βš™οΈ Mini no-name dehumidifier βœ‚οΈ Kebab skewers (LST – stainless) βš™οΈ Wire + roast skewers (LST assist) βœ‚οΈ Scissors (HST) βš™οΈ Vacuum (for spills & cleanup) βš™οΈβœ‚οΈβš™οΈβœ‚οΈβš™οΈβœ‚οΈβš™οΈβœ‚οΈβš™οΈ πŸŒˆπŸ’πŸ­πŸ¬πŸŒˆπŸ’πŸ­πŸ¬πŸŒˆπŸ’πŸ­πŸ¬πŸŒˆπŸ’ πŸ¦„Fantasy Feast(@resi_max Seeds)πŸ¦„ πŸŒˆπŸ’πŸ­πŸ¬πŸŒˆπŸ’πŸ­πŸ¬πŸŒˆπŸ’πŸ­πŸ¬πŸŒˆπŸ’ Species: Hybrid (Regular) Genetics: The mother is Unicorn Whip by Dirty Bird Genetics. The father is Charcuterie by Cannarado Genetics. Effect: Unknown WIP Flavor: Unknown WIP Flowering: Estimated 8–10 weeks Resistance: Unknown β€” Testing phase Notes: Expect weird phenos, candy terps, possible outliers
Likes
9
Share
COMING SOON!! The tent and everything is all clean and sanitized πŸ‘. Had some issues but now im Almost ready FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram:Β @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diaryπŸ€œπŸ€› TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light:Β Consuming 300w and also mounted withΒ 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light:Β With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape:Β The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra:Β By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available:Β Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty:Β CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions:Β 315mm*225mm*210mm. | Weight:Β 2.7. | Airflow:Β 402CFMΒ | Noise:Β 32dB-AΒ | Bearings: Dual Ball.Β 
Likes
20
Share
This one has been the second easiest harvest we ever did (back to the Purple Punch), the plant lost many leaves by herself, still pretty easy. she has a strong flavour and we literally cant wait to smoke her.
Likes
8
Share
@Mo_Powers
Follow
it grows and grows and grows. it looks very healthy and strong. the changeable weather doesn't bother it at all. the first small pistils can be seen. it gets a nice nutrient mix from biobizz root and grow.
Likes
70
Share
All feeds with nutes use either a whole ratio or combination of "Veg Mix" and "Bloom Mix"concentrates DILUTED in water until a total ppm of add in is reached using a (Total Dissolved Solids)TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added in smaller ratios and "Bloom Mix" concentrate what will eventually replace the "Veg Mix" concentrate entirely with the ppm and ratios listed when I feed. Veg mix recipe is on week 3. Bloom Mix recipe is on week 5. Day 63 She didnt grow much over night but she seems to have already took to her new digs with no further signs of stress past last night's droopy leaves that have since bounced back today. PH tested the top soil 6.38,6.45,6.42,6.4 for an avg of 6.4125 - I tried to take a couple from the original soil and the soil divide of old/new - the numbers run close to the same so Im satisfied. Placed the ring back on - Measured 11 inches from soil to bar, but I can work with that as it's still level and the branches run past it all the way around. I also tried to level it. I didnt feel the need to tie any of the branches this time as they are mostly going where I wanted them to. PPFD is still lower power at 2 ticks from high and center colas at 510 and 500 with the outering at 430 lowest and 470 at highest with most at about 455 VPD is okay with temps at 74F/64%RH/33%ILV Day 64 VPD and PPFD still mostly the same about 520 to 440 on ppfd from center to lowest outer ring and 74F/64%RH/33%ILV she seems to be likely the new set up and soil is still somewhat tacky - Plan to water in 2 days. I could water tomorrow, but I rather make the roots look for new space in the outer ring before just giving more for now. Day 65 VPD and ppfd mostly the same - 73F/64%RH/33%ILV with lights at 520 for the center colas and 430 for the lowest of the outer ring She's mostly filled the ring and close to 15 inches including the ring meaning I should be able to defoliate and flip this coming weekend. So I'll prep for that. It has been 3 days since transfer and last feed. Soil is still moist but not wet on the very top. I prepped tap water to burn chlorine tonight and will consider wetting her a little tomorrow. No more than a gallon of straight water for now, then again with reduced nutes a few days after that. Day 66 VPD same; 74F/64%RH/33%ILV PPFD after watering was 430 at lowest and 520 at highest - also moved the lights because I finally got the stand for the 10 gallon pot. Lights are now about 33 inches from soil and since the plant is about 15 inches high that makes the light about 18 inches from leaves to light. Watered with 1 gallon of 6.4ph de-chlorinated tap. Used a spreader water can and spray bottle. I used the whole gallon and there was no run off. Day 67 VPD okay at 74F/65%RH/33%ILV took 4 ph tests in the top soil got 6.64, 6.65, 6.67, and 6.54 for an avg of 6.625 (actually higher than I wanted but still well with-in range of acceptable. waited until later in the day and defoliated lower leaves - mostly the larf leaves under the ring. Also used HST and LST to break a few branches and tie others. The goal is to set a more level top before flip. But one that can be secured with the ring later if needed. PPFD now has 600 as highest and 430 as lowest she's spread quite far from center to outer rings now. Overall she looks close to flip and I think I might be able to at the start of week 10 day 70. Day 68 VPD was normal at 74F/65%RH/33%ILV - PPFD ranged from 400 to 600 with most around 500 She seems to be recovered mostly form the HST/LST/Defoliation - or at least is accepting the training as the colas that were bent are now pointing up. There are a few leaves showing stress and possible deficiency but all I can do is monitor and treat with my next feed if I see it spread more. Took measurements too - about 16inches tall with a diameter of about 22 by 22, so I am happy with this wing span and no scrOG Day 69 Normal stats with 74F/65%RH/33%ILV ppfd also the same as yesterday ranging from 400 to 600. Tomorrow will be 4 days since her last water feed - I plan to feed about 1 gallon of de-chlorinated tap water with about 50 ppm of each veg and bloom juice mix. I also plan to flip to 12/12 tomorrow. Schedule will be 3 hours later and earlier from current times. Decided to put her into a MarsHydro 24x48x71 tent and start giving UV/IR light treatments through flower. So that's the tent I also have a Bloom Plus XP2500 LED Grow Light - a set of Spider Farmer UVR40 40W UV & IR Supplemental Lighting Bars and I am using a iPower 6 Inch Smart Vent. I measured the distance from soil to lights and placed it back at 35 inches like it was with the ViparSpectra XS2000 in the other tent - I then dialed the lights down to the same ppfd as it was. I am giving her 30 minutes of UV light 1 hour before bed and then 15 minutes of IR after lights out and before lights on again - which is now 3 hours later.
Likes
13
Share
@Rangaku
Follow
This particular one requires a fair bit of attention with defol but certainly worth the effort, she’s dripping with resin already. Added an extra fan to keep air moving over and humidity down . Same same next week
Processing
Likes
Comments
Share
this week was a good week I watch my girl.grow from a seed to a plant and is now starting up.flowering stage she's the shortest out of my 3 plants and I just added one plant to my family didnt wanna be to excited with this one because I lost her twin sister already but her strain is (its 1 day since she popped up)"wedding cake "
Likes
99
Share
@BudXs
Follow
GHL STRAIN REVIEW!!!!!!! Shout out to @GreenHouseLab for sending me an amazing package! Return package on the way!!!! So stoked to have six shooter AND 2 fkn new untried cheeses to fuck with in 2021!! See vids
Likes
29
Share
Hi guys So here is my 10 plant auto run from fastbuds 420 genetics. I will update weekly on this one. So I'm going to be using 3 gal fabric pots filled with biobizz lightmix soil. I will be putting into solo cups after the 18 hour soak then transferring them to there for ever pots. Im looking forward to this run and trying to get 20oz + dry and cured out of this 4x4 tent grow. Part 2 of germination in operation in solo cups with root juice. Hopefully 10 out of 10 pop.
Likes
37
Share
Music in video: ➑️ INSTAGRAM: https://www.instagram.com/niwel17/?hl=fr ➑️ TWITTER: https://twitter.com/NiwelMusic17 ➑️ SOUNDCLOUD: https://soundcloud.com/niwel-516897768 ➑️ FACEBOOK: https://www.facebook.com/Niwel-Music-... β—† CONTACT: [email protected] β—† **************************************** Yesterday, day 105 and 62 days after the switch to 12/12, Kim, Jannine and Iris were harvested. 5 days in advance, I flushed the girls and after the EC was sufficiently reduced, I watered them one more time using FloraKleen. The next day, I watered with plain tapwater and runoff EC was the same as our tapwater. That Wednesday, was the last day I gave them water. On Friday, they had their 12 hours of light for the last time. I forgot to make a family picture just before harvest, but I did make a movie during those last hours of light. After 36 hours of darkness, I harvested on sunday. The coco had dried up quite a bit. The pots felt light to the touch, but when I removed Jannine from the tent (the one that was always in the middle), she immediately collapsed under the weight of her own buds! The same happened to Kim, only Iris was able to holdup most buds, but with a lot of effort. Apparently they had support from each other and the walls of the tent all that time. The buds were promising: heavy, hard and dense. Can't wait to see how they work out after drying and curing. Even the buds lower on the plants were not nearly as fluffy as my first grow, but more like little marbles. My first grow, I trimmed everything wet, but this time, I only removed the fan leaves and some of the bigger sugar leaves. Also, I kept the branches bigger this time. I threw a lot of the little buds in the trim pile, but since they were still looking and feeling like some good buds (but just small) I decided after harvesting the first plant, to throw them in separate containers. So I now have the trim from all the plants, mixed with some of the smaller buds from Jannine and two separate containers with the smaller buds from both Iris and Kim. It went into the freezer fresh, directly after harvest. Since I am lazy, I ordered a bubble washer, which will be delivered somewhere this week, to ease up the hash making proces. Can't wait to try some of the hash from these girls! As for most of the buds, they are drying in the tent. The circumstances could be a lot better: for weeks during flower, RH in our house was at 60%, but in the 24 hours directly after harvest, it came down to 40%. The weather changed from very humid to very dry and it will be like this until the end of the week. Considering it's about 23 degrees C in the drying room (maybe 22 during night) and the fact it will become increasingly warmer the next few days, I am worried about the buds drying to fast (by far my biggest concern), but also loosing some potency. It is now 24 hours after harvest and the buds are still pretty wet, so at least 3 days of drying should be possible, maybe 4. A few days slower would be better, but probably unlikely. Anyway, this ends my second grow. Off course, I will be back with the final results in a few weeks, after drying, curing, making hash of the trim/popcorn buds and off course, testing it all. I expect to start a new grow somewhere in august. Thanks all for following along and all the help during some troublesome moments. I hope you all have a great summer! Stay safe, keep growing!
Likes
14
Share
@Targona
Follow
Targona: 29 days since my little girl sprouted from seeds🌱 Fourth week of growth of my OG Eddy Lepp Auto πŸ’šπŸŒΊπŸ’šπŸŒΊ Nutrients: I use nutrients from Advanced Hydroponics Of Holland - three basic components, still according to the table for growth during the flowering period πŸ’“ - - Dutch fertilizer Formula 1 Grow - supplies the plant with substances necessary for the perfect development of roots, stem and leaves; intended for the growth phase 🌾 - Dutch fertilizer Formula 2 Bloom - contains a large amount of nutrients necessary for rapid growth and fruit development, supplies the plant with energy; intended for the flowering phase 🌸🌿 - Dutch fertilizer Formula 3 Micro - increases oxygen intake, improves plant immunity, ensures better absorption of nutrients; intended for the growth and flowering phase 🌴 ------------------------------------------------------------------------------------- Plagron Power Roots - Root Stimulator Plagron Roots is a biological root stimulator that supports the formation of the root system. I use it until the fifth week of growth πŸƒπŸƒ - I fertilize for the last time in the fifth week of plant growth. -------------------------------------------------- -------------------------------------------------- -------- BioBizz Calmag - The special Calmag supplement was designed for professional and hobby growers who need to supply their plants with calcium and magnesium in organic quality for a long time or immediately. The 100% organic πŸ’©πŸ’© and certified BioBizz Calmag product is made of calcium carbonate and magnesium sulfate supplemented with humic acid. -------------------------------------------------- -------------------------------------------------- -------- BioBizz Bio pH - is an organic pH regulator. An aqueous solution of citric acid, which occurs naturally in citrus fruits πŸ‹πŸ‹ ------------------------------------------------------------------- ---------------------------------------------- During the flowering period, I add Advanced Nutrients stimulants: - JUNGLE X Environ is a highly effective complex preparation for stimulating flower formation. 🌸🏡️ - Bud Candy - carbohydrates for my girls 🍭🍭🍭 ⚑⚑⚑However - from the next watering I will fundamentally change the nutrients to organic with small exceptions. I will make this change carefully, so that the girls feel good, have the nutrients they need and at the same time not give them so much synthetics ⚑⚑⚑ General: OG Eddy Lepp Auto πŸ’šπŸŒΊπŸ’šπŸŒΊ - The girl is growing beautifully and responds well to nutrients. In the last week she switched to the flowering phase and therefore grew tall, even though it is a hybrid.πŸŒΏπŸ’š Training: Classic, I continuously perform defoliation and small LST - I tie up the branches that grow towards the pot just like the others so that they do not shade each other's buds. In addition, I gently pulled the large leaves closer to the stem so that I don't have to cut them πŸ’šπŸŒžπŸŒž Light: Mars Hydro TS1000 The plants respond effectively and the light is technically very well managed - I try to have 50 cm between the light and the plants, so I regularly move it up πŸ’‘πŸ’‘πŸ’‘ Thanks for the likes :) See you soon 😍😍
Likes
54
Share
@valiotoro
Follow
Once again GALACTIC buds! And once again cant add the comment lol
Likes
8
Share
Another week closer... Everything is growing great, no problems with this run so far., This last week we found a Male plant, this is what happens when you grow from seed...sucks..but thats ok it happens. So its out of the grow room and everything is back to normal.. The smell is starting to get stronger, love it, it smells great....well thats about it.. Until next week, smoke a fatty, help out your fellow grower.
Likes
28
Share
Babies are almost ready! Starting to fade and getting denser by the day. There’s definitely noticeable differences between phenotypes. One smells like a woody kush, another smells like kush/diesel and the other one smells of pure grapes. Expected a little more genetic stability but still h@ppy with the variety.