I’m to busy sorry

Hello and welcome to another week of bulking of my Gorilla Cookies Auto by FastBuds. Her buds are exploding with a fresh fruity and earthy aromas, and her buds ain't getting smaller. Every budsite has a bud that is almost as big as a ping pong ball, they are very compact and reek of resin. This week i also added another layer of sand, because the fungus knats didn't seem to stop, but now with 1cm of sand it seems realtively peaceful now. As she is nearing the end i want to give her a good 2-week-finish, by supporting it with finalpart. I prepared her by flushing her with FlashClean beforehand so the soil gets reset so finalpart can take full effect. Also i lowered the light to give the lady more power. Tomorrow as of day 73 the Controller to my AW400 by Vivosun is arriving, and i will be using that for the last weeks of the Gorilla Cookies, and will be starting the next grow with the AW400 as the main light There is nothing much to do, just watering her with her nutes, and waiting until she is done. Very good, Thats it for this week, i hope you enjoyed it, this is going to be one of the last updates of her.

Gran Turismo is really looking sharp! The leaves are a beautiful, dark green and it's growing so fast. I think it might be my favorite seedling – it's got this really strong stem, and it stands tall. I can tell it's gonna be a healthy plant when it grows up.

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flower Day 65 since time change to 12/12 hrs. Hey everyone 😀. We arrived last week. Unfortunately, I'll be harvesting the lady a few days earlier than planned since it started a little on the top 2 buds to mold :-( Very annoying with these genetics. It was also one of the few who wasn't a cuttling :-(. The harvest update is coming in the coming days. Until then, I wish you a lot of fun and all the best :-) You can buy this Strain at : https://originalsensible.com/original-sensible-seeds-zkittlez~20503 Type: Zkittlez ☝️🏼 Genetics: Afghan Kush Indica x Grandaddy Purple x Grapefruit hybrid 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

First off, that mf holds it's name very well. The smell on that strain is phenomenal. Much of fruity citrus and earthy notes and that's without the curing. I smoked a bit to get a taste. Smoke and taste quite harsh but that should go away with the curing. I harvested 634g wet, including a lot of stems, and ended up with 121g dried. they lost 80% of their mass and I might have over-dried them since I expected to get more tbh. However that's more than enough to get me through next harvest. The 3 plants turned out to be pretty different phenotype. All over pretty great but one could have used denser buds. They don't have the same maturity which means I got buds for all occasions. Kept the trimmings in the freezer for an hour and also harvested 0.67g of kief with a 220 micron bag. A lot of impurities but that was to be expected. I don't think the calcium problem has had a significant impact. Overall very happy with the product and the experience.

I like this strain because it almost doesnt need any training and bulks very dense budz.

Day 22: Drain EC 3 feet high and risin'😅( average 3.3 to be exact...) dunno how much whatever-salt is building up in that pots, but it obviuosly doesn't bother the ladies. Dark green colour, very few 'claws', no signs of tipp-burn, new foliage appears in a juicy green and turns dark in an instant, leafs point upwards....... looks like they're happy😊. Planns for this week: - Install the scrog-net - Obsereve plants/soil ( when do i have to feed nutrients again?) otherwise there will be no changes...... Thoughts: These bushy babies will be kind of a challlenge to create this scrog the way i'm used to (basically bending the 4 main main colas to the corners of the tent, upper branches to the walls and spaces between the pants, lower branches to the very center). Now these ladies make so many branches, so close togehter and so equal in length, underneath huge fanleafs..... i'd love to have them in a 100 square meter canna-crib....but in a tent...????? I really hate doin' things without having them planned - but in this case i guess i will have to install the net, start weaving and see what's happening😯 Day 23 Let's keep it positive...... indoor-climate of 64% rh is perfect for my health💪😁!!! ......but in my tent it's killing the vpd😖. at a lousy 24 degrees C, i'm readin' about 60-64 % rh wich results in about 0.7 to 0.8 kPa.* More figures? Here come the crazyones👻!: pH 5.5; EC 4.2😨 but thats only drain from plant 3....... average was 6.1/3.6 The girls busy produce roots, shoots and leafs....... still very green, still not unhealthy.......few claws, no tipp-burn. Basically a comfortable place to be: It's not bad yet - no work but watering - and it can only get better!!!😁 *VPD issue solved: The sensor hung too close to a fanleaf - didn‘t expect this thing beeing so sensitive 😅. Day 24 Climbed new hights this morning: Plant 1 had an EC of 3.8 - the others didn't climb any higher than yesterday. So maybe we've reached the climax..... 😇 Visible growth now - so i installed the scrog-net and will start bending and weaving these days:-) Thoughts: Did beeing out of VPD-range for one day harm my plants? How exact can my sensor measure VPD? after a bit of research i found out: Whatever you buy for less than 200 bucks is far from beeing exact! Even professional sensors have a margin of about +/- 1% in relative humidity. Thermometers at least +/- 0.5 degrees C. This could give some a good guess of the actual VPD BUT: Leaf-temperature-offset is absolute key! Many of our trusted homegrow-equippment isn't even able to measure it (some offer default temp-offset) ....don't wanna go further here - but there's no way to achieve something like a precise VPD-measurement in homegrowing. So why caring for VPD? Even with those less accurate instruments, you may be able to keep your plants in something like a comfort-zone. Way better than only guessing 👆!!! In case i ran a much higher VPD than planned, yesterday (due to a missplaced sensor) , it will not harm or kill my plants. they might have had a bit of stress from dry air - but nothing to worry about! Day 24: Decreasing salt-levels in the drain - excepting plant 4, wich had an EC of 4.0 - so i guess i'm slowly draining exess-salts from top to bottom and might have collected some build-up. The girls seem to be quite okay. Root-growth is vigorous (there are thick, white roots penetrating through the pots, everywhere), the stems are relatively thin. removed the LST-lines. the Sc.r.o.g: only materiels needed, were a climbing-net for gardening (HDPE) cut to 90x90 for my 1x1 tent, 4 cable-ties and 2 meters of strong rubber-cord. Pre-installed the net with the cable-ties, then weaved the cord around the outter cords of the net, led it aroud the posts and pulled tight. Then brought the net into it's final position. Not as sturdy as with a wooden frame - but i had less than half the work and a bit of freedom to move things if necessary. Any shoot will now be put to the next outter square (relative to the center of each plant) as soon as can be held by the net, without harming the top. Once i moved all of the dominant colas to the next square, i'll have to take 10-15cm steps (vertical growth), to reach the next square. As soon as i have about 70 of my 81 squares filled, i'm going to flip to 12/12. Since i'm plannin' to have them full of sugar when flippin', i don't expect too much of a stretch. This way i hopefully have the longest and strongest shoots framing the shorter ones in the center - so the canopy shapes like a bowl, in order to achieve the most even light distribution possible. Day 25: The main colas visibly reached out for the light - but yet i only moved 1 single shoot to the next square. Girls look good, EC is dropping slowly, climate fine. CU tomorrow👋 day 26: on Track... nothing to worry about...... till day 28....... Due to high EC levels in the soil, i couldn't do much more than pour out some water and prepare the scrog this week. Next week i will have to do some weaving. If the nutrientlevels allow, i'll do some defoliation.

First week of flower in the books💯👊🏻

as you can see at pick with 2 Male Plants i will to polization some other Female plants some one recomend me some thing to do with both Male Plants, are Bigger, and Taller

Hey Guys! Check out our AK-47 Goxuak from Genehtik 😊 we are very proud of and impressed by this girls so far! This weeks Objective; hardening off for the Optic 8+ tent. We will be moving her to the big tent in a couple weeks and the light is MUCH more powerful, so right now she goes under it for a couple hours b4 bed each evening. She has overcome some obstacles in her life and is thriving! It's kinda funny. We had never heard of Genehtik b4 buying the seed from single seed centre, and honestly didnt expect much. So, when the time came to transplant and we realized we were out of pots we decided to put her in the only container handy (we were transplanting them in the kitchen at the time lol) and she has thrived! It's really cool because we can see root growth through the pitcher. But we wrapped it in duct tape to protect them. Of the 3 autos we sprouted, she is the only not yet in flower (thankfully) hopefully the pitcher is large enough for her to put on some wieght! We are new to this diary thing so if anyone takes the time to read this and has and questions or advice please please let us know!! And thanks for checking her out! We will name her at flower Stats: Vivosun 2x4 tent 1gal water pitcher Fox Farms Happy Frog soil 2x viparspectra 600w refractive LEDs 2hrs,3hrs,4hrs 5hrs then permanently under an Optic 8+ Durabreeze carbon filter 4" inline fan

This week went by well, I will start checking the trichomes on the Runtz at the end of this week. It should be ready for harvest in the next 2 to 3 weeks The G13 is still smelling like magic, looking majestic. The GDP buds are starting to put on weight

Day fifty, they're all looking pretty good.I'm doing a ph check every couple days

5 week was very intense, it showed itself in all its glory. Every day he rejoiced in his delightful forms, and in the middle of the week he had great tension, which, in my opinion, should have led to self-development, stress, a slight light burn. The exhaust fan burned out, I had to install a cooler from the system unit. All that is needed is all that is needed to get the maximum light, and practically every branch and leaf is light, nothing interferes, and the light penetrates into the depths! I want it to be very fast))) I plan to translate it in color for 6-7 weeks, she got a lot of stress, which, in my opinion, is not desirable, naturally, I am not surprised, and it will tell on the harvest . I already have cultivation experience. imitate how an auto color behaves) in general, a high nitrogen content, temperatures over 26 degrees reach 30 degrees at most, considering the variety, not the best GHE fertilizer, light ventilation and my cheap LED lamp, on the fifth week you can get what you see. I am from the first experience that the miser pays twice! Comfort for plants, well, waiting for the first week of flowering, go ahead!

Hey guys! Thanks for stopping in to check out my babies! This is week 2 of flower (days 8-14). This week things really seemed to take off! 🔥 Plants were happy all week long and seemed to grow almost an 1” per day if not more. Buds are developing nicely, no smell yet but nice to see them stackin’. I cut out anything under the trellis that would end up being popcorn buds so the plants could focus on the main colas. Hoping I’ll just have to pull a few leaves here and there from now on. The New Floraflex drip system has been nice! 💯 It has made watering easier and more automated. Water distribution isn’t perfect but I’m sure they aren’t 100% level either. Plants should stop stretching after this next week and should start putting on some size! Stoked to see what these girls can do in week 3! Day by day break down: Day 8 Cut out some lower growth/ leaves blocking bud sites Day 9 Fed all 6 plants. PH: 6.11, PPM: 1136 Day 10 Plants look great. Let them do their thing. Day 12 Fed al 6 plants. PH: 6.05, PPM: 1264 Day 14 sitting at 29” tall right now. Not so stressed on height being be issue. Thinking they might be around 35-40” tall at the max. Stay tuned for next weeks post to see how much these ladies have thickened up!

Start der 9. Blütewoche. Optisch top, olfaktorisch topitop, haptisch ein Träumchen. Erinnert mich an Bildern von überfüllten Badeanstalten in Asien🤣 toller Vergleich.. Bin zufrieden. Mal schauen wie lange ich denen noch gebe. So langsam kommt auch Farbe ins Spiel. Mutti purple haze wollte lieber grün bleiben. Vielleicht schaffen es ja ihre Klone ihrem strain auch gerecht zu werden.. 14.02. Ende der 9. Blütewoche. Es geht dem Ende entgegen. Werd mir die Trichome heute Abend mal näher ansehen.

Ooooooweeeeeee they’re all doing so good even the extras that I threw in flower with out cloning are doing great .. in just 2 more weeks I’ll throw the donor plants into flower

Ohh Hello, topman… The neighbors are much higher and because of this it still does not reach the grid ... Plus, i included Aptos regulator - silicone@@